https://wiki.teltonika-gps.com/api.php?action=feedcontributions&feedformat=atom&user=Deividas.DarulisTeltonika Telematics Wiki - User contributions [en]2026-05-21T23:23:09ZUser contributionsMediaWiki 1.43.5https://wiki.teltonika-gps.com/index.php?title=System_settings&diff=97134System settings2024-03-27T10:29:19Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMC System settings with 1WIRE|model=FMC234<br />
|txt_din3 =<br />
|input_mode =<br />
}}<br />
[[Category:FMC234 Configuration]]<br />
<br />
==Low Power Mode==<br />
[[File:Low_power_mode.gif|right|400px]]<br />
Low Power mode functionality was implemented to firmware from FMB.03.29.00.Rev.601. This functionality only works on devices that supports battery. It can only be active if device sleep mode is configured as Deep Sleep or Online Sleep. In other cases, low power mode is not allowed. <br />
* '''Min Period''' – is timer after which device has to wake up (exit Deep or Online sleep state)<br />
* '''GPS Search Period''' – is period in which device tries to acquire GPS fix after waking up<br />
* '''GPS Accuracy''' – is value of minimum requirements of HDOP/PDOP/VDOP to renew GPS data after fix was acquired.<br />
* '''GPS Satellites Quantity''' – is value of minimum visible satellites available to device to renew GPS data after fix was acquired.<br />
* '''Hold GPS Fix Timeout''' – is timer in which device tries to hold GPS fix for better GPS data accuracy.<br />
<br><br />
<br><br />
As mentioned before, this functionality only works if Deep sleep or Online sleep is configured. Device will enter Low Power mode if external power source is lost, but battery is connected. Device immediately will switch to it’s configured sleeping mode without checking any conditions for sleeping mode. Only conditions for device to go to sleep are: is Low Power mode enabled, is external voltage missing, is there a battery connected.<br />
<br><br />
<br><br />
'''Note:''' When device is in Low Power mode, device will not generate any records except for one periodic record after every '''Min Period'''.<br />
===BT/BLE module OFF during Sleep modes===<br />
------------------<br />
Power off sleep mode can be described as the lowest possible power consumption mode where the device can go into power off state.<br />
<br><br />
<br />
From the version, 03.28.XX this new functionality includes new parameters:<br />
<br />
*'''Periodic Wakeup''' – if value is greater than zero, device while being in Deep Sleep or Online Deep Sleep, will wake up after defined period for beacon collection. This is mainly should be used when Bluetooth® is disabled in sleep.<br />
*'''Bluetooth® On While In Sleep'''- by default this parameter value is set to Enable and BT will work as in base functionality. If this value is set to Disable, Bluetooth® will be turned off when device goes to Deep Sleep or Online Deep Sleep and will be turned on during Periodic Wakeup or if device enters normal state.<br />
[[Image:PWU.jpg|right|300px]]<br />
</br></br><br />
<br />
Note: In case when during scan after wakeup no BLE devices will be found FMB will be active for configured scan duration time in Bluetooth® 4.0 tab. After that timeout FMB will go to sleep state.<br />
<br><br />
<br />
Power off sleep mode can be described as the lowest possible power consumption mode where the device can go into power off state and can only wake up if one of the conditions is true:<br />
<br />
*Movement is detected by accelerometer (not by the configured movement source);<br />
*External power is applied;<br />
*It is the time to make a new periodic record (new feature);<br />
<br><br />
Please keep a note that Power OFF Sleep will not work if any USB cable is connected to the device.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=97133FMC234 firmware errata2024-03-27T10:27:44Z<p>Deividas.Darulis: </p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
|-<br />
!03.29.XX<br />
|FMC234<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[FMC234 Bluetooth® 4.0 settings|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=System_settings&diff=97132System settings2024-03-27T10:27:11Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMC System settings with 1WIRE|model=FMC234<br />
|txt_din3 =<br />
|input_mode =<br />
}}<br />
[[Category:FMC234 Configuration]]<br />
<br />
==Low Power Mode==<br />
[[File:Low_power_mode.gif|right|400px]]<br />
Low Power mode functionality was implemented to firmware from FMB.03.29.00.Rev.601. This functionality only works on devices that supports battery. It can only be active if device sleep mode is configured as Deep Sleep or Online Sleep. In other cases, low power mode is not allowed. <br />
* '''Min Period''' – is timer after which device has to wake up (exit Deep or Online sleep state)<br />
* '''GPS Search Period''' – is period in which device tries to acquire GPS fix after waking up<br />
* '''GPS Accuracy''' – is value of minimum requirements of HDOP/PDOP/VDOP to renew GPS data after fix was acquired.<br />
* '''GPS Satellites Quantity''' – is value of minimum visible satellites available to device to renew GPS data after fix was acquired.<br />
* '''Hold GPS Fix Timeout''' – is timer in which device tries to hold GPS fix for better GPS data accuracy.<br />
<br><br />
<br><br />
As mentioned before, this functionality only works if Deep sleep or Online sleep is configured. Device will enter Low Power mode if external power source is lost, but battery is connected. Device immediately will switch to it’s configured sleeping mode without checking any conditions for sleeping mode. Only conditions for device to go to sleep are: is Low Power mode enabled, is external voltage missing, is there a battery connected.<br />
<br><br />
<br><br />
'''Note:''' When device is in Low Power mode, device will not generate any records except for one periodic record after every '''Min Period'''.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Features_settings&diff=97131Features settings2024-03-27T10:25:11Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>{{Template:FMC_Features_settings|model = FMC234<br />
|eco_green= [[Image:FMB9_Green_Eco_Driving_feature.png|300px|right]]<br />
|txt_advanced = <br />
|dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|over_speed = 375px<br />
|jamming = 378px<br />
|gnss_fuel_counter = 375px<br />
|dout_control_via_call = 295px<br />
|immobilizer = 300px<br />
|ibutton_read_notification = 375px<br />
|over_speeding_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|jamming_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|dout_control_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|immobilizer_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|ibutton_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|SECO = <br />
}}<br />
[[Category:FMC234 Configuration]]<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
<br />
[[Image:GNSS_Jammingass.PNG|{{{general|size}}}|right]]<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
Eventual Records parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.29.00.Rev.601 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 but available on 5.10, 5.1.5, 5.1.8 or newer GNSS module firmware versions. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[FMC234 Sleep modes#Deep Sleep mode|Deep Sleep]], [[FMC234 Sleep modes#Ultra Deep Sleep mode|Ultra Deep Sleep]] and [[FMC234 Sleep modes#Online Deep Sleep mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Features_settings&diff=97130Features settings2024-03-27T10:23:17Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMC_Features_settings|model = FMC234<br />
|eco_green= [[Image:FMB9_Green_Eco_Driving_feature.png|300px|right]]<br />
|txt_advanced = <br />
|dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|over_speed = 375px<br />
|jamming = 378px<br />
|gnss_fuel_counter = 375px<br />
|dout_control_via_call = 295px<br />
|immobilizer = 300px<br />
|ibutton_read_notification = 375px<br />
|over_speeding_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|jamming_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|dout_control_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|immobilizer_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|ibutton_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|SECO = <br />
}}<br />
[[Category:FMC234 Configuration]]<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
<br />
[[Image:GNSS_Jammingass.PNG|{{{general|size}}}|right]]<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
Eventual Records parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.29.00.Rev.601 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 but available on 5.10, 5.1.5, 5.1.8 or newer GNSS module firmware versions. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Features_settings&diff=97129Features settings2024-03-27T10:22:28Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMC_Features_settings|model = FMC234<br />
|eco_green= [[Image:FMB9_Green_Eco_Driving_feature.png|300px|right]]<br />
|txt_advanced = <br />
|dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|over_speed = 375px<br />
|jamming = 378px<br />
|gnss_fuel_counter = 375px<br />
|dout_control_via_call = 295px<br />
|immobilizer = 300px<br />
|ibutton_read_notification = 375px<br />
|over_speeding_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|jamming_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|dout_control_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|immobilizer_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|ibutton_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|SECO = <br />
}}<br />
[[Category:FMC234 Configuration]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Features_settings&diff=97128Features settings2024-03-27T10:21:38Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMC_Features_settings|model = FMC234<br />
|eco_green= [[Image:FMB9_Green_Eco_Driving_feature.png|300px|right]]<br />
|txt_advanced = <br />
|dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|over_speed = 375px<br />
|jamming = 378px<br />
|gnss_fuel_counter = 375px<br />
|dout_control_via_call = 295px<br />
|immobilizer = 300px<br />
|ibutton_read_notification = 375px<br />
|over_speeding_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|jamming_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|dout_control_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|immobilizer_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|ibutton_dout = Digital output 1 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case. For more information please refer to [[DOUT_controls|DOUT controls]].<br />
|SECO = <br />
}}GNSS Jamming:<br />
[[Category:FMC234 Configuration]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=How_to_capture_direct_log_from_FM_device%3F&diff=96097How to capture direct log from FM device?2024-02-22T14:19:42Z<p>Deividas.Darulis: /* Using filters for different issues */</p>
<hr />
<div>__TOC__<br />
<br />
==How does it work?==<br />
<p>All our devices are able to transmit their current state when they are connected to PC using USB cable or over the air using [https://wiki.teltonika-gps.com/view/FOTA_WEB| Fota Web].<br />
</p><p>Log file is used to detect errors and provide information when device is operating unexpectedly.<br /><br />
==Using filters for different issues==<br />
<br />
Always use login and password before commnad like with all other commands for FMB devices [https://wiki.teltonika-gps.com/view/FMB120_SMS/GPRS_Commands| How to send an sms]<br />
<br />
=====Connectivity issue=====<br />
<br />
03.27 base -> log2sdfilterset 0;11;12;13;18;2;1<br />
03.28/29 base -> log2sdfilterset 0;3;11;12;13;19;18;1<br />
<br />
=====OBD/CAN log=====<br />
<br />
log2sdfilterset 0;3;4;2;1<br />
=====GPS accuracy issue=====<br />
<br />
log2sdfilterset 0;3;17;1<br />
=====Accelerometer, calibration issue=====<br />
<br />
log2sdfilterset 0;3;2;22;21;1<br />
=====BLE sensors/beacons=====<br />
<br />
log2sdfilterset 0;3;2;20;1<br />
=====CarSharing FW (BT/BLE/CAN filter)=====<br />
<br />
log2sdfilterset 0;3;7;8;4;1<br />
=====1-wire issue=====<br />
<br />
log2sdfilterset 0;3;2;5;1<br />
=====TimeSync issue=====<br />
<br />
log2sdfilterset 0;3;6;1<br />
=====DOUT control/Immo issue=====<br />
<br />
log2sdfilterset 0;3;2;10;14;1<br />
<br><br />
<br><br />
Note: Filters are applicable for following Tracker groups:<br />
<br><br />
* Basic Trackers;<br><br />
* Fast & Easy Trackers;<br><br />
* Advanced Trackers;<br><br />
* OBD Trackers;<br><br />
* CAN Trackers & Adapters.<br><br />
Groups can be found in [https://wiki.teltonika-gps.com/view/Main_Page landing page]<br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+ <br />
|-<br />
| style="text-align: left; background: #F6F6FB;" | [[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" | After issue is reproduced and logs are collected, please, remove filters by sending -> log2sdfilterset 0 - SMS command!<br />
|-<br />
|}<br />
<br />
==Steps to collect log file through FOTA WEB==<br />
Send [https://wiki.teltonika-gps.com/view/FMB120_SMS/GPRS_Commands| web_connect] sms command to device after log download task is assigned.<br />
<br />
[[File:FOTA_WEB_Log_Download.mp4|1200px]]<br />
<br />
==Steps to collect log file through Terminal.exe==<br />
</p><p>Required Terminal application for log capturing can be downloaded here: [https://appdb.winehq.org/objectManager.php?sClass=version&iId=23025 Terminal]<br />
<br /><br />
</p><p>After connecting device to PC, it creates two ports:<br />
<br /><br />
<br /><br />
<br /><br />
</p><br />
<ul><li><b>USB Debug Port</b> - used for modem trace.</li><br />
<li><b>USB Modem Port</b> - used for <b>terminal log</b>.</li></ul><br />
<p><br /><br />
<br /><br />
<br /><br />
</p><p>If connected device is not recognized by PC, please install appropriate drivers.<br /><br />
Download Teltonika COM port driver from the link: [https://wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip COM port driver]<br />
<br><br />
{| class="wikitable" style="background: #0054A6; color: black; border: 2px #0054A6; border-bottom: 1px solid #0054A6;border-top: 1px solid #0054A6;border-left: 1px solid #0054A6;border-right: 1px solid #0054A6;""<br />
|+<br />
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: #0054A6; color: white;" |<b>NOTE:</b><br />
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" | <br />
[[File:BaseCOM.png|right|390px]]<br />
<br><br />
<br><br><br><br />
*Additionally, you can find your port when opening configurator.<br />
*Do not forget to leave configurator in first page as shown in the example, because while device configuration page is open, you will not be able to start your logging process.<br />
|}<br />
<br />
<b>Follow these steps to start log:</b><br />
* select COM port;<br />
* select the baud rate;<br />
* handshaking parameters;<br />
* click connect and "<b>Start Log</b>" button.<br />
<br />
If log is not running, please send .log:1 command (see picture below). Now you are able to monitor all internal processes happening in the device. All logged process is saved in the txt file.<br><br />
<b>Note</b>: Send command .log:0 to stop logging.<br />
[[File:Terminal log.png|center]]<br />
''Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation.''<br />
<br /><br />
==Log capturing using Teltonika Configurator==<br />
To retrieve logs from device, connect it via USB to PC and open Teltonika Configurator software.<br />
* '''Log files''' - Provide live information when the issue is happening. Log files can be taken via configurator.<br />
* '''Dump files''' - Provide files that the device logged automatically. You have to make sure to take them from FOTA WEB or configurator.<br />
Follow these quick steps to get all the necessary debug information in just over 10 minutes.<br />
<br />
#<b>Open configurator debug window:</b> Open the configurator with the device connected to PC. Go to Status section -> Maintenance window.<br />
#<b>Take log files that are already stored in the device:</b> Click "Dump" to take the information from the device containing logs from the past that device made automatically. If the issue happened 2-3 hours ago we will see it in these files.<br />
#*<b>Note 1:</b> If the device is installed in a vehicle and deployed in the field you can use FOTA WEB to download these files remotely.<br />
#<b>Make LOG file during/replicating the issue:</b> If you want to repeat the issue now, you can use logging functionality accessed in the same window. Just start logging by clicking "Log" replicate the issue and when the log ends to attach it to the query. When logs are made they export your current configuration as well.<br />
#* <b>Note 1:</b> For example, you should send SMS during the logging period if you claim that your device is not receiving SMS.<br />
#* <b>Note 2:</b> For troubleshooting remote vehicles download DUMP files via FOTA and download them as soon as possible after replicating the issue.<br />
#<b>Find DUMP/LOG files:</b> After the logging is done "Open directory" button in the configurator to find your DUMP, LOG, and CFG files.<br />
#<b>Taking configuration file separately:</b> If you have not made a DUMP or log file in previous steps, export your configuration file by using the "Save to file" button.<br />
#* <b>Note 1:</b> In the GIF file is saved to the Documents folder for quick access by pressing the "Open directory" button in the configurator. You may choose a different save location. <br />
<br><br />
[[File:How_to_get_log_dump_cfg_files.gif|center]]<br />
''Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation.''<br />
<br><br />
<br />
==Other Log capture guides==<br />
====[https://wiki.teltonika-gps.com/view/How_to_capture_OBDII_data_log%3F OBDII Logging]====<br />
<br><br />
====[https://wiki.teltonika-gps.com/view/How_to_capture_CAN_adapter_log_from_FMX1YX CAN adapter logging]====<br />
<br><br />
====[https://wiki.teltonika-gps.com/view/How_to_capture_remote_Tacho_log_from_FM_device%3F Tachograph file download logging]====<br />
[[Category: Frequently Asked Questions - FAQ]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=How_to_capture_direct_log_from_FM_device%3F&diff=96096How to capture direct log from FM device?2024-02-22T14:16:38Z<p>Deividas.Darulis: </p>
<hr />
<div>__TOC__<br />
<br />
==How does it work?==<br />
<p>All our devices are able to transmit their current state when they are connected to PC using USB cable or over the air using [https://wiki.teltonika-gps.com/view/FOTA_WEB| Fota Web].<br />
</p><p>Log file is used to detect errors and provide information when device is operating unexpectedly.<br /><br />
==Using filters for different issues==<br />
<br />
Always use login and password before commnad like with all other commands for FMB devices [https://wiki.teltonika-gps.com/view/FMB120_SMS/GPRS_Commands| How to send an sms]<br />
<br />
=====Connectivity issue=====<br />
<br />
03.27 base -> log2sdfilterset 0;11;12;13;18;2;1<br />
03.28/29 base -> log2sdfilterset 0;3;11;12;13;19;18;1<br />
<br />
=====OBD/CAN log=====<br />
<br />
log2sdfilterset 0;3;4;2;1<br />
=====GPS accuracy issue=====<br />
<br />
log2sdfilterset 0;3;17;1<br />
=====Accelerometer, calibration issue=====<br />
<br />
log2sdfilterset 0;3;2;22;21;1<br />
=====BLE sensors/beacons=====<br />
<br />
log2sdfilterset 0;3;2;20;1<br />
=====CarSharing FW (BT/BLE/CAN filter)=====<br />
<br />
log2sdfilterset 0;3;7;8;4;1<br />
=====1-wire issue=====<br />
<br />
log2sdfilterset 0;3;2;5;1<br />
=====TimeSync issue=====<br />
<br />
log2sdfilterset 0;3;6;1<br />
=====DOUT control/Immo issue=====<br />
<br />
log2sdfilterset 0;3;2;10;14;1<br />
<br><br />
<br><br />
Note: Filters are applicable for following Tracker groups:<br />
<br><br />
* Basic Trackers;<br><br />
* Fast & Easy Trackers;<br><br />
* Advanced Trackers;<br><br />
* OBD Trackers;<br><br />
* CAN Trackers & Adapters.<br><br />
Groups can be found in [https://wiki.teltonika-gps.com/view/Main_Page landing page]<br />
==Steps to collect log file through FOTA WEB==<br />
Send [https://wiki.teltonika-gps.com/view/FMB120_SMS/GPRS_Commands| web_connect] sms command to device after log download task is assigned.<br />
<br />
[[File:FOTA_WEB_Log_Download.mp4|1200px]]<br />
<br />
==Steps to collect log file through Terminal.exe==<br />
</p><p>Required Terminal application for log capturing can be downloaded here: [https://appdb.winehq.org/objectManager.php?sClass=version&iId=23025 Terminal]<br />
<br /><br />
</p><p>After connecting device to PC, it creates two ports:<br />
<br /><br />
<br /><br />
<br /><br />
</p><br />
<ul><li><b>USB Debug Port</b> - used for modem trace.</li><br />
<li><b>USB Modem Port</b> - used for <b>terminal log</b>.</li></ul><br />
<p><br /><br />
<br /><br />
<br /><br />
</p><p>If connected device is not recognized by PC, please install appropriate drivers.<br /><br />
Download Teltonika COM port driver from the link: [https://wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip COM port driver]<br />
<br><br />
{| class="wikitable" style="background: #0054A6; color: black; border: 2px #0054A6; border-bottom: 1px solid #0054A6;border-top: 1px solid #0054A6;border-left: 1px solid #0054A6;border-right: 1px solid #0054A6;""<br />
|+<br />
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: #0054A6; color: white;" |<b>NOTE:</b><br />
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" | <br />
[[File:BaseCOM.png|right|390px]]<br />
<br><br />
<br><br><br><br />
*Additionally, you can find your port when opening configurator.<br />
*Do not forget to leave configurator in first page as shown in the example, because while device configuration page is open, you will not be able to start your logging process.<br />
|}<br />
<br />
<b>Follow these steps to start log:</b><br />
* select COM port;<br />
* select the baud rate;<br />
* handshaking parameters;<br />
* click connect and "<b>Start Log</b>" button.<br />
<br />
If log is not running, please send .log:1 command (see picture below). Now you are able to monitor all internal processes happening in the device. All logged process is saved in the txt file.<br><br />
<b>Note</b>: Send command .log:0 to stop logging.<br />
[[File:Terminal log.png|center]]<br />
''Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation.''<br />
<br /><br />
==Log capturing using Teltonika Configurator==<br />
To retrieve logs from device, connect it via USB to PC and open Teltonika Configurator software.<br />
* '''Log files''' - Provide live information when the issue is happening. Log files can be taken via configurator.<br />
* '''Dump files''' - Provide files that the device logged automatically. You have to make sure to take them from FOTA WEB or configurator.<br />
Follow these quick steps to get all the necessary debug information in just over 10 minutes.<br />
<br />
#<b>Open configurator debug window:</b> Open the configurator with the device connected to PC. Go to Status section -> Maintenance window.<br />
#<b>Take log files that are already stored in the device:</b> Click "Dump" to take the information from the device containing logs from the past that device made automatically. If the issue happened 2-3 hours ago we will see it in these files.<br />
#*<b>Note 1:</b> If the device is installed in a vehicle and deployed in the field you can use FOTA WEB to download these files remotely.<br />
#<b>Make LOG file during/replicating the issue:</b> If you want to repeat the issue now, you can use logging functionality accessed in the same window. Just start logging by clicking "Log" replicate the issue and when the log ends to attach it to the query. When logs are made they export your current configuration as well.<br />
#* <b>Note 1:</b> For example, you should send SMS during the logging period if you claim that your device is not receiving SMS.<br />
#* <b>Note 2:</b> For troubleshooting remote vehicles download DUMP files via FOTA and download them as soon as possible after replicating the issue.<br />
#<b>Find DUMP/LOG files:</b> After the logging is done "Open directory" button in the configurator to find your DUMP, LOG, and CFG files.<br />
#<b>Taking configuration file separately:</b> If you have not made a DUMP or log file in previous steps, export your configuration file by using the "Save to file" button.<br />
#* <b>Note 1:</b> In the GIF file is saved to the Documents folder for quick access by pressing the "Open directory" button in the configurator. You may choose a different save location. <br />
<br><br />
[[File:How_to_get_log_dump_cfg_files.gif|center]]<br />
''Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation.''<br />
<br><br />
<br />
==Other Log capture guides==<br />
====[https://wiki.teltonika-gps.com/view/How_to_capture_OBDII_data_log%3F OBDII Logging]====<br />
<br><br />
====[https://wiki.teltonika-gps.com/view/How_to_capture_CAN_adapter_log_from_FMX1YX CAN adapter logging]====<br />
<br><br />
====[https://wiki.teltonika-gps.com/view/How_to_capture_remote_Tacho_log_from_FM_device%3F Tachograph file download logging]====<br />
[[Category: Frequently Asked Questions - FAQ]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Teltonika_Configurator_versions&diff=95992Teltonika Configurator versions2024-02-20T09:28:27Z<p>Deividas.Darulis: </p>
<hr />
<div>__NOTOC__<br />
<br />
Here you can find '''Teltonika Configurator''' software release and latest versions.<br />
<br />
Please select your device to find the correct version of Configurator:<br />
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2"><br />
'''BASIC'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB900, FMB920]]<br />
*[[Teltonika_Configurator_versions#For FMC920, FMM920 series|FMC920, FMM920]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB910]]<br />
*[[Teltonika Configurator versions#For FMB930, FMB965|FMB930, FMB965]]<br />
'''FAST&EASY'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB001, FMB010]]<br />
*[[Teltonika_Configurator_versions#For FMB003, FMB002, FMB020 Series|FMB003, FMB002, FMB020]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMT100]]<br />
*[[Teltonika_Configurator_versions#For FMP100|FMP100]]<br />
'''ADVANCED'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB110, FMB120, FMB122, FMB125, FMB130]]<br />
*[[Teltonika_Configurator_versions#For FMU1YX/FMC1YX/FMM1YX Series|FMC125, FMC130, FMM125, FMM130, FMU125, FMU126, FMU130]]<br />
*[[Teltonika_Configurator_versions#For FMC13A, FMM13A series|FMC13A, FMM13A]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB202, FMB204]]<br />
*[[Teltonika_Configurator_versions#For IP67 Series|FMB230, FMC225, FMC230, FMM230, FMB240, FMB225, FMC234]]<br />
*[[Teltonika_Configurator_versions#For MSP500|MSP500]]<br />
'''AUTONOMOUS'''<br />
*[[Teltonika_Configurator_versions#For TAT1YX series|TAT100, TAT140, TAT240]]<br />
*[[Teltonika_Configurator_versions#For GH5200 & TMT250|GH5200, TMT250]]<br />
'''E-MOBILITY'''<br />
*[[Teltonika_Configurator_versions#For TFT100 & TST100|TFT100, TST100]]<br />
'''OBD'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB001, FMB010]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FM3001]]<br />
*[[Teltonika Configurator versions#For FMC001|FMC001]]<br />
*[[Teltonika Configurator versions#For FMM001|FMM001]]<br />
*[[Teltonika Configurator versions#For FMC00A, FMM00A series|FMC00A, FMM00A]]<br />
*[[Teltonika_Configurator_versions#For FMB003, FMB002, FMB020 Series|FMB003, FMB002, FMB020]]<br />
*[[Teltonika_Configurator_versions#For FMC003, FMM003 series|FMC003, FMM003]]<br />
*[[Teltonika_Configurator_versions#For FMC800, FMM800, FMM80A, FMC880, FMM880 series|FMC800, FMM800, FMM80A, FMC880, FMM880]]<br />
'''CAN'''<br />
*[[Teltonika_Configurator_versions#For_FMB140|FMB140]]<br />
*[[Teltonika_Configurator_versions#For_FMx150 series|FMB150, FMC150, FMM150]]<br />
'''PRO'''<br />
*[[Teltonika_Configurator_versions#For_FMB640|FMB640]]<br />
*[[Teltonika_Configurator_versions#For_FMB641|FMB641]]<br />
*[[Teltonika_Configurator_versions#For FMC640 & FMM640|FMC640, FMM640]]<br />
*[[Teltonika_Configurator_versions#For FMC650|FMC650]]<br />
*[[Teltonika_Configurator_versions#For FMM650|FMM650]]<br />
<br />
</div><br />
<br />[[File:Conf_release.png|20px|link=]] - '''Release''' version which is used with current firmware release version: [[FMB_firmware_errata|FMB firmware errata]], [[FMB640_firmware_errata|FMB640 firmware errata]]<br />
<br /><br /><br />
===For FMB series===<br />
----<br />
Configurator suitable for: {{Template:FMB_configurator_devices}}<br />
Download COM port drivers from Teltonika '''[[Media:TeltonikaCOMDriver.zip|here]]''' before launching configurator tool.<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CHANGES<br />
<br />
|-<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.11"> 1.7.72_B.3.29_R.11 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.29.00.Rev.14|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.11.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.12.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Virtual DIN2 added for FMB910 configuration<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.10"> 1.7.72_B.3.29_R.10 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.29.00.Rev.13|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.11.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Added OEM IO params and VIN configuration<br />
*Added SECO functionality<br />
*Added Advanced pulse counters<br />
*Added Support Low Power Mode<br />
*Added functionality to keep Bluetooth® on during sleep<br />
*Added periodic wakeup during sleep<br />
*Added ability to disable GPRS Authentication<br />
*Added new EYE Sensor/Beacon configurable settings<br />
*Added GNSS Jamming<br />
*Added Private/Business functionality <br />
*Added Backup tracking feature <br />
*Parsed CAN Security flags parameters<br />
*Extended Sensor preset<br />
*Updated default parameter values <br />
*SMS events moved to a separate tab<br />
*Removed OBDII settings from non-OBD devices<br />
*Fixed duplicate OBDII parameters<br />
*Fixed mismatching and missing parameter ID's<br />
*Configurator optimization and stability improvements<br />
*Added 1-Wire interface control in Sleep modes feature<br />
*Configurator supports only 64-bit systems<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.14.Rev.00|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.13.Rev.03|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Universal beacon support (visualization from Configurator)<br />
*Added Inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual Beacon record with On Change record<br />
*Beacon Record Priority selection<br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.6.4_B.3.25_R.8"> 1.6.4_B.3.25_R.8 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.25.18.Rev.08|03.25.18.Rev.08]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.6.4_B.3.25_R.8.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2021.05.25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.6.4_B.3.25_R.5"> 1.6.4_B.3.25_R.5 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.25.18.Rev.05|03.25.18.Rev.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.6.4 B.3.25 R.5.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2021.02.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*AutoAPN improvements<br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|}<br />
<br />
===For FMB640===<br />
---- <br />
Configurator suitable for: [[FMB640]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.64_B.FM64_R.88"> 1.7.64_B.FM64_R.88 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.02.27.Rev.06|01.02.27.Rev.06]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.64 B.FM64 R.88.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.07.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.58"> 1.7.4_B.FM64_R.58 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.02.22.Rev.02|01.02.22]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.40 B.FM64 R.58.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.08.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
*Fixed RS485 settings<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12"> 1.7.17_B.FM64_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.13|01.00.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.17_B.FM64_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.05.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12">1.7.4_B.FM64_R.12 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.05|01.00.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.FM64_R.12.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.10.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Tachograph FrontPanel improvements<br />
*Additional tachograph parameters added<br />
*AutoCAN reading improvements<br />
* Sleep modes improvements<br />
*Battery charging/discharging improved<br />
*Tracking On demand added<br />
*LVCAN DTC codes reading improvements<br />
* 1Wire TSH202 multiple sensors support added<br />
*Periodical TSM232 SBD records saving improvements<br />
*TCP buffering to SD card added<br />
*GPRS Remote log improvements<br />
|}<br />
<br />
===For FMB641===<br />
---- <br />
Configurator suitable for: [[FMB641]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.64 B.FM64 R.83"> 1.7.64 B.FM64 R.83 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB641 firmware errata#02.02.17.Rev.04|02.02.17.Rev.04]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.64 B.FM64 R.83.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.06.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.55_B.FM64_R.73"> 1.7.55_B.FM64_R.73 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB641 firmware errata#02.02.16.Rev.03|02.02.16.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.55 B.FM64 R.73.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.02.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
|}<br />
<br />
===For FMC640 & FMM640===<br />
---- <br />
Configurator suitable for: [[FMC640]], [[FMM640]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CHANGES<br />
|-<br />
<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.64_B.FM64_R.88"> 1.7.64_B.FM64_R.88 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.02.27.Rev.06|01.02.27.Rev.06]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.64 B.FM64 R.88.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.07.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.58"> 1.7.4_B.FM64_R.58 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC640 firmware errata#01.02.22.Rev.02| FMC640 => 01.02.22]] <br> [[FMM640 firmware errata#01.02.22.Rev.02| FMM640 => 01.02.22]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.40 B.FM64 R.58.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.08.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
*Fixed RS485 settings<br />
|-<br />
<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12"> 1.7.17_B.FM64_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.13|01.00.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.17_B.FM64_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.05.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12">1.7.4_B.FM64_R.12 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.05|01.00.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.FM64_R.12.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.10.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Tachograph FrontPanel improvements<br />
*Additional tachograph parameters added<br />
*AutoCAN reading improvements<br />
*Sleep modes improvements<br />
*Battery charging/discharging improved<br />
*Tracking On demand added<br />
*LVCAN DTC codes reading improvements<br />
*1Wire TSH202 multiple sensors support added<br />
*Periodical TSM232 SBD records saving improvements<br />
*TCP buffering to SD card added<br />
*GPRS Remote log improvements<br />
|}<br />
<br />
=== For FMC650 ===<br />
---- <br />
Configurator suitable for: [[FMC650]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.70_B.FM64_R.104"> 1.7.70_B.FM64_R.104 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC650_firmware_errata#Firmware_versioning| 03.00.15.Rev.09]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.70 B.FM64 R.104.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|}<br />
<br />
=== For FMM650===<br />
---- <br />
Configurator suitable for: [[FMM650]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.70 B.FM64 R.104"> 1.7.70 B.FM64 R.104 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC650_firmware_errata#Firmware_versioning| 03.00.15.Rev.09]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.70 B.FM64 R.104.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|}<br />
<br />
===For FMU1YX/FMC1YX/FMM1YX Series===<br />
----<br />
Configurator suitable for: [[FMC125]], [[FMC130]], [[FMM125]], [[FMM130]], [[FMU125]], [[FMU126]], [[FMU130]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.11"> 1.7.72_B.3.29_R.11 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.29.00.Rev.14|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.11.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.12.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Virtual DIN2 added for FMB910 configuration<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.10"> 1.7.72_B.3.29_R.10 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMC130 firmware errata #03.29.00.Rev.13|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.11.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Added OEM IO params and VIN configuration<br />
*Added SECO functionality<br />
*Added Advanced pulse counters<br />
*Added Support Low Power Mode<br />
*Added functionality to keep Bluetooth® on during sleep<br />
*Added periodic wakeup during sleep<br />
*Added ability to disable GPRS Authentication<br />
*Added new EYE Sensor/Beacon configurable settings<br />
*Added GNSS Jamming<br />
*Added Private/Business functionality <br />
*Added Backup tracking feature <br />
*Parsed CAN Security flags parameters<br />
*Extended Sensor preset<br />
*Updated default parameter values <br />
*SMS events moved to a separate tab<br />
*Removed OBDII settings from non-OBD devices<br />
*Fixed duplicate OBDII parameters<br />
*Fixed mismatching and missing parameter ID's<br />
*Configurator optimization and stability improvements<br />
*Added 1-Wire interface control in Sleep modes feature<br />
*Configurator supports only 64-bit systems<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMM125 firmware errata#03.27.13.Rev.03|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.4"> 1.7.30_E.SLM320JAMMING_R.4 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125 firmware errata#Firmware versions|03.27.13.Rev.443]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.4.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.12.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.3"> 1.7.30_E.SLM320JAMMING_R.3 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125 firmware errata#Firmware versions|03.27.13.Rev.57]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/1.7.30_E.SLM320JAMMING_R.3.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.05.04<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added FMC125 with SLM320 module support<br />
*Added SMS via LTE support for hardware`s with SLM320 modules<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.2"> 1.7.30_E.SLM320JAMMING_R.2 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC130 firmware errata#Firmware versions|03.27.13.Rev.54]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.03.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added Jamming support for FMC130 hardware with SLM320-L module<br />
*Fixed NITZ time synchronization with SLM320 modules<br />
*Fixed connection to operator issue<br />
*Added FMC125 with SLM320 hardware support<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_B.3.27_R.28"> 1.7.30_B.3.27_R.28 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM230 firmware errata#Firmware versions|03.27.12.Rev.12]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.28.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.02.21<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMM230, FMC230, FMC225, FMB230, FMB225, FMB240 support<br />
*Fixed manual frequency bands configuration for FMMx30 devices<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=" id="1.7.30_B.3.27_R.26"> 1.7.30_B.3.27_R.26 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_ errata#03.27.10.Rev.02|03.27.10.Rev.02]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.26.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.11.11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added Green/Eco driving calculator<br />
*Extended FOTA WEB check period to 12h<br />
*Other minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_ errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
* Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.4_B.3.27_R.13"> 1.7.4_B.3.27_R.13 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.04.Rev.01]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.13.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.03.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.4_B.3.27_R.12"> 1.7.4_B.3.27_R.12 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.03.Rev.02]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.12.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.01.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.3.27_R.9"> 1.7.4_B.3.27_R.9 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.02.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.10.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.4_B.3.27_R.7"> 1.7.4_B.3.27_R.7 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.02.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.7.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.09.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.4.10_C_160"> 1.4.10_C_160 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FM*1YX firmware errata|03.25.10.Rev.175]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.4.10 C 160.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2019.12.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
*Added support for FMU1YX,FMC1YX,FMM1YX devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMB140===<br />
----<br />
Configurator suitable for: [[FMB140]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140_firmware_errata|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.05.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140_firmware_errata|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.6.4_E.fmb14x_R.2"> 1.6.4_E.fmb14x_R.2 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140_firmware_ errata#03.27.07.Rev.00|03.25.16.Rev.410]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.6.4_E.fmb14x_dev_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.12.10<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Odometer calculation from CAN data improvements<br />
|}<br />
<br />
===For FMx150 series===<br />
----<br />
Configurator suitable for: [[FMB150]], [[FMC150]], [[FMM150]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.47_E.FMB150_R.4"> 1.7.47_E.FMB150_R.4 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB150_firmware_errata|03.28.03.Rev.155]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.47 E.FMB150 R.4.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.09.06<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.53_E.FMB150_R.10"> 1.7.53_E.FMB150_R.10 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150_firmware_errata|03.28.06.Rev.152]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.53 E.FMB150 R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.01.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.54_E.FMX150_R.1"> 1.7.54_E.FMX150_R.1 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150_firmware_errata|03.28.07.Rev.152]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.54 E.FMX150 R.1.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.05.03<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.54_E.FMX150_R.1"> 1.7.74_E.FMX150_R.9 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150_firmware_errata|03.28.07.Rev.159]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.74 E.FMX150 R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*OEM file download via configurator added<br />
|}<br />
<br />
===For FMC001===<br />
----<br />
Configurator suitable for: [[FMC001]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001_firmware_errata|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.05.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.28"> 1.7.30_B.3.27_R.28 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001_firmware_ errata#03.27.12.Rev.00|03.27.12.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.28.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.02.09<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Preferred Operator functionality improvements<br />
*SLM320 modem support added<br />
*BLE advanced beacon improvements<br />
*Static navigation improvements<br />
*GNSS improvements<br />
*New OBD Data MCU support added<br />
*Improved system stability and fixed general bugs<br />
|-<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001_firmware_ errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.5.6_C_084"> 1.5.6_C_084</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001 firmware errata|03.25.15.Rev.88]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.5.6 C 084.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.03.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMC001,FMM001 devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMM001===<br />
----<br />
Configurator suitable for: [[FMM001]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30 B.3.27 R.29"> 1.7.30 B.3.27 R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001_firmware_ errata#03.27.13.Rev.01|03.27.13.Rev.01]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.06<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.34_E.FMB002-3-20_R.110"> 1.7.34_E.FMB002-3-20_R.110</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001 firmware errata|03.27.12.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.34 E.FMB002-3-20 R.110.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.03.17<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001_firmware_ errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.5.6_C_084"> 1.5.6_C_084</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001 firmware errata|03.25.15.Rev.88]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.5.6 C 084.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.03.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMC001,FMM001 devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC00A, FMM00A series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC00A]], [[FMM00A]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="E.FMX00A_R.2"> E.FMX00A_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC00A firmware errata|03.27.12.Rev.143]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/E.FMX00A R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.06.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
=== For FMB003, FMB002, FMB020 Series===<br />
----<br />
Configurator suitable for: [[FMB003]] & [[FMB002]] & [[FMB020]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.34_E.FMB002-3-20_R.110"> 1.7.34_E.FMB002-3-20_R.110</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata|03.27.12.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.34 E.FMB002-3-20 R.110.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.03.17<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.22_E.fmb003-002-020_R.104"> 1.7.22_E_R.104</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata|03.27.07.Rev.94]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_E.fmb003-002-020_R.104.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.09.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added OEM IO parameters and VIN configuration<br />
*Other minor improvements<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_E_R_99"> 1.7.4_E_R_99</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata|03.25.15.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_E.fmb002-3_R.99.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.12.02<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMB003,FMB002, FMB020 devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMP100===<br />
----<br />
Configurator suitable for: [[FMP100]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.5.7_C_094"> 1.7.21_E.FMP100_R.6</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMP100 firmware errata|03.27.07.Rev.461]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.21_E.FMP1_R.6.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.10.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added BLE Netronix RFID and Buttons support<br />
*Other minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.5.7_C_094"> 1.6.4_E.FMP100_R.1</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMP100 firmware errata|03.25.15.Rev.132]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.6.4_E.FMP100_R.1.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.09.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMP100<br />
*Added Private/Business mode<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For IP67 Series===<br />
----<br />
Configurator suitable for: [[FMB230]], [[FMB240]], [[FMB225]], [[FMM230]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 35%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.13.Rev.03|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
|-<br />
|}<br />
<br />
Configurator suitable for: [[FMC225]], [[FMC230]], [[FMC234]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 35%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_E.FMC234_R.5"> 1.7.72_E.FMC234_R.5</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC234 firmware errata|03.29.00.Rev.601]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.72 E.FMC234 R.5.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2024.02.19<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*FMC234 support<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.4"> 1.7.30_E.SLM320JAMMING_R.4</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC230 firmware errata|03.27.13.Rev.443]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.4.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.12.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.3"> 1.7.30_E_R.3</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC225 firmware errata|03.27.13.Rev.57]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.3.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.05.11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.2"> 1.7.30_E_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC230 firmware errata|03.27.13.Rev.54]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_E.SLM320JAMMING_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMB930===<br />
----<br />
Configurator suitable for: [[FMB930|FMB930,]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.60_E.FMB9YX_R.15"> 1.7.60_E.FMB9YX_R.15</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB930 firmware errata|03.27.10.Rev.482]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/E.FMB9YX R.15.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.05.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Initial Release<br />
|-<br />
|}<br />
===For FMB965===<br />
----<br />
Configurator suitable for: [[FMB930|FMB930,]] [[FMB965]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.60_E.FMB9YX_R.17"> 1.7.60_E.FMB9YX_R.17</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB965 firmware errata|03.27.10.Rev.487]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.60_E.FMB9YX_R.17.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Wakeup sources added<br />
*Wakeup source dependency added<br />
*Configuration mismaches fixed<br />
*Sleep settings tooltip updated<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_E.FMB9YX_R.8"> 1.7.30_E.FMB9YX_R.9</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB965 firmware errata|03.27.10.Rev.464]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/E.FMB9YX R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Initial Release<br />
|-<br />
|}<br />
<br />
=== For FMC920, FMM920 series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC920]], [[FMM920]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.10"> 1.7.72_B.3.29_R.10</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.11.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.38_E.FMC920_R.9"> 1.7.38_E.FMC920_R.9</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata|03.28.02.Rev.197]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.38 E.FMC920 R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.04.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=""mw-headline" id="1.7.38_E.FMC920_R.8"> 1.7.38_E.FMC920_R.8</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata|03.28.02.Rev.195]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.38 E.FMC920 R.8.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.12.15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=""mw-headline" id="1.7.38_E.FMC920_R.8"> 1.7.38_E.FMC920_R.8</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM920 firmware errata|03.28.02.Rev.192]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.38 E.FMC920 R.8.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.12.15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=""mw-headline" id="1.7.38_E.FMC920_R.2"> 1.7.38_E.FMC920_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM920 firmware errata|03.28.02.Rev.85]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.38_E.FMC920_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.07.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC003, FMM003 series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC003]], [[FMM003]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.53_E.FMX00X_R.6"> 1.7.53_E.FMX00X_R.6</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC003 firmware errata|03.28.03.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.53 E.FMX00X R.6.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.02.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC800, FMM800, FMM80A, FMC880, FMM880 series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC800]], [[FMM800]], [[FMM80A]], [[FMC880]], [[FMM880]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.63_E.FMX8XX_R.2"> 1.7.63_E.FMX8XX_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.28.07.Rev.353]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.63_E.FMX8XX_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMC880, FMM880 devices<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.53_E.FMX8X0_R.5"> 1.7.53_E.FMX8X0_R.7</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.28.02.Rev.143]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.53_E.FMX8X0_R.7.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMM80A device<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.53_E.FMX8X0_R.5"> 1.7.53_E.FMX8X0_R.5</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.28.02.Rev.126]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.53_E.FMX8X0_R.5.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.01.12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC13A, FMM13A series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC13A]], [[FMM13A]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.39_E.3.27_R.91"> 1.7.39_E.3.27_R.91</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.27.13.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.39 E.3.27 R.91.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.07.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
|}<br />
<br />
===For GH5200 & TMT250===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[GH5200]], [[TMT250]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.66 B.55.2 R.10.zip"> 1.7.66_B.55.2_R.10</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TMT250|55.02.03.Rev.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/1.7.66 B.55.2 R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-30<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*[CHN] Added new AVL ID's SMS events tab<br />
*[FIX] Fixed Online vs Offline configuration discrepancies<br />
*[FIX] Fixed Ultra Deep Sleep naming mismatch<br />
*[FIX] Fixed Tool Tips inaccuracies<br />
*[ADD] Added EYE Sensors support settings and filtering by sensors name and MAC address<br />
*[CHN] Changed device wiki links to teltonika-gps<br />
*[CHN] Moved EYE Sensor I/O settings to Bluetooth 4.0 tab<br />
*[FIX] Fixed Roaming operator/Operator Black List .csv file importing<br />
*[FIX] Fixed Maximum GPS Satellites Quantity parameter (ID: 906) value<br />
*[ADD] Added configurable accelerometer sensitivity settings<br />
*[ADD] Added continuous battery charging mode<br />
*[CHN] Changed minimum BLE scan start period value<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.6.11 R.39"> 1.6.11 R.39</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TMT250|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.6.11 R.39.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.09.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*[CHN] Renamed Universal Beacons feature to BLE Devices<br />
*[CHN] Changed TMT250/GH5200 default configuration<br />
|-<br />
|}<br />
<br />
===For MSP500===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[MSP500]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.4.9 C.002"> 1.4.9 C.002</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[MSP500 firmware errata|03.25.05.Rev.127]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.4.9 C.002.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.07.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
|}<br />
<br />
===For TAT1YX series===<br />
----<br />
Configurator suitable for: [[TAT100]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.16_E.TAT100.R23 RELEASE"> 1.7.16_E.TAT100.R23 RELEASE</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT100|55.00.16.Rev.545]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/TAT100 Teltonika.Configurator 1.7.16 E.TAT100.R23 RELEASE.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.08.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
|}<br />
<br />
Configurator suitable for: [[TAT140]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.16_B.TAT1_.R3"> 1.7.16_B.TAT1_.R3</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT140|55.00.16.Rev.558]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/TAT1_teltonika.Configurator_1.7.16_B.TAT1_R3.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.07.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Removed non configurable elements<br />
|-<br />
|}<br />
<br />
Configurator suitable for: [[TAT240]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.74_B.TAT1_.R.6"> 1.7.74_B.TAT1_.R.6</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT240|55.00.16.Rev.562]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_TAT_1.7.74_B.TAT1_R.6.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Initial release<br />
|-<br />
|}<br />
<br />
[[Category:Teltonika Configurator]]<br />
<br />
===For TFT100 & TST100===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[TFT100]], [[TST100]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.6.11_R.39"> 1.6.11_R.39</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TFT100_Stable_firmware|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.6.11 R.39.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.09.09<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*[CHN]: Changed Default and Minimum CAN Command period. Changed tooltips.<br />
*[ADD]: Add timestamp backup description<br />
*[CHN]: Corrected misleading and outdated tooltips<br />
*[CHN]: Changed TFT100 default configuration.<br />
*[ADD]: Added CAN I/O reset parameter.<br />
*[ADD]: Govecs FLEX (TFT100) changes were merged into 7.0.33 version.<br />
*[ADD]: Added AES128 BLE encryption KEY parameter<br />
*[CHN]: Updated tooltip description for DOUT Deactivation Via DIN<br />
|-<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Teltonika_Configurator_versions&diff=95991Teltonika Configurator versions2024-02-20T09:26:53Z<p>Deividas.Darulis: /* For IP67 Series */</p>
<hr />
<div>__NOTOC__<br />
<br />
Here you can find '''Teltonika Configurator''' software release and latest versions.<br />
<br />
Please select your device to find the correct version of Configurator:<br />
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2"><br />
'''BASIC'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB900, FMB920]]<br />
*[[Teltonika_Configurator_versions#For FMC920, FMM920 series|FMC920, FMM920]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB910]]<br />
*[[Teltonika Configurator versions#For FMB930, FMB965|FMB930, FMB965]]<br />
'''FAST&EASY'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB001, FMB010]]<br />
*[[Teltonika_Configurator_versions#For FMB003, FMB002, FMB020 Series|FMB003, FMB002, FMB020]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMT100]]<br />
*[[Teltonika_Configurator_versions#For FMP100|FMP100]]<br />
'''ADVANCED'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB110, FMB120, FMB122, FMB125, FMB130]]<br />
*[[Teltonika_Configurator_versions#For FMU1YX/FMC1YX/FMM1YX Series|FMC125, FMC130, FMM125, FMM130, FMU125, FMU126, FMU130]]<br />
*[[Teltonika_Configurator_versions#For FMC13A, FMM13A series|FMC13A, FMM13A]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB202, FMB204]]<br />
*[[Teltonika_Configurator_versions#For IP67 Series|FMB230, FMC225, FMC230, FMM230, FMB240, FMB225]]<br />
*[[Teltonika_Configurator_versions#For MSP500|MSP500]]<br />
'''AUTONOMOUS'''<br />
*[[Teltonika_Configurator_versions#For TAT1YX series|TAT100, TAT140, TAT240]]<br />
*[[Teltonika_Configurator_versions#For GH5200 & TMT250|GH5200, TMT250]]<br />
'''E-MOBILITY'''<br />
*[[Teltonika_Configurator_versions#For TFT100 & TST100|TFT100, TST100]]<br />
'''OBD'''<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FMB001, FMB010]]<br />
*[[Teltonika_Configurator_versions#For_FMB_series|FM3001]]<br />
*[[Teltonika Configurator versions#For FMC001|FMC001]]<br />
*[[Teltonika Configurator versions#For FMM001|FMM001]]<br />
*[[Teltonika Configurator versions#For FMC00A, FMM00A series|FMC00A, FMM00A]]<br />
*[[Teltonika_Configurator_versions#For FMB003, FMB002, FMB020 Series|FMB003, FMB002, FMB020]]<br />
*[[Teltonika_Configurator_versions#For FMC003, FMM003 series|FMC003, FMM003]]<br />
*[[Teltonika_Configurator_versions#For FMC800, FMM800, FMM80A, FMC880, FMM880 series|FMC800, FMM800, FMM80A, FMC880, FMM880]]<br />
'''CAN'''<br />
*[[Teltonika_Configurator_versions#For_FMB140|FMB140]]<br />
*[[Teltonika_Configurator_versions#For_FMx150 series|FMB150, FMC150, FMM150]]<br />
'''PRO'''<br />
*[[Teltonika_Configurator_versions#For_FMB640|FMB640]]<br />
*[[Teltonika_Configurator_versions#For_FMB641|FMB641]]<br />
*[[Teltonika_Configurator_versions#For FMC640 & FMM640|FMC640, FMM640]]<br />
*[[Teltonika_Configurator_versions#For FMC650|FMC650]]<br />
*[[Teltonika_Configurator_versions#For FMM650|FMM650]]<br />
<br />
</div><br />
<br />[[File:Conf_release.png|20px|link=]] - '''Release''' version which is used with current firmware release version: [[FMB_firmware_errata|FMB firmware errata]], [[FMB640_firmware_errata|FMB640 firmware errata]]<br />
<br /><br /><br />
===For FMB series===<br />
----<br />
Configurator suitable for: {{Template:FMB_configurator_devices}}<br />
Download COM port drivers from Teltonika '''[[Media:TeltonikaCOMDriver.zip|here]]''' before launching configurator tool.<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CHANGES<br />
<br />
|-<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.11"> 1.7.72_B.3.29_R.11 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.29.00.Rev.14|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.11.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.12.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Virtual DIN2 added for FMB910 configuration<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.10"> 1.7.72_B.3.29_R.10 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.29.00.Rev.13|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.11.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Added OEM IO params and VIN configuration<br />
*Added SECO functionality<br />
*Added Advanced pulse counters<br />
*Added Support Low Power Mode<br />
*Added functionality to keep Bluetooth® on during sleep<br />
*Added periodic wakeup during sleep<br />
*Added ability to disable GPRS Authentication<br />
*Added new EYE Sensor/Beacon configurable settings<br />
*Added GNSS Jamming<br />
*Added Private/Business functionality <br />
*Added Backup tracking feature <br />
*Parsed CAN Security flags parameters<br />
*Extended Sensor preset<br />
*Updated default parameter values <br />
*SMS events moved to a separate tab<br />
*Removed OBDII settings from non-OBD devices<br />
*Fixed duplicate OBDII parameters<br />
*Fixed mismatching and missing parameter ID's<br />
*Configurator optimization and stability improvements<br />
*Added 1-Wire interface control in Sleep modes feature<br />
*Configurator supports only 64-bit systems<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.14.Rev.00|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.13.Rev.03|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Universal beacon support (visualization from Configurator)<br />
*Added Inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual Beacon record with On Change record<br />
*Beacon Record Priority selection<br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.6.4_B.3.25_R.8"> 1.6.4_B.3.25_R.8 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.25.18.Rev.08|03.25.18.Rev.08]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.6.4_B.3.25_R.8.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2021.05.25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.6.4_B.3.25_R.5"> 1.6.4_B.3.25_R.5 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.25.18.Rev.05|03.25.18.Rev.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.6.4 B.3.25 R.5.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2021.02.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*AutoAPN improvements<br />
*Improved system stability and fixed general bugs<br />
<br />
<br />
|}<br />
<br />
===For FMB640===<br />
---- <br />
Configurator suitable for: [[FMB640]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.64_B.FM64_R.88"> 1.7.64_B.FM64_R.88 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.02.27.Rev.06|01.02.27.Rev.06]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.64 B.FM64 R.88.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.07.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.58"> 1.7.4_B.FM64_R.58 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.02.22.Rev.02|01.02.22]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.40 B.FM64 R.58.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.08.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
*Fixed RS485 settings<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12"> 1.7.17_B.FM64_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.13|01.00.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.17_B.FM64_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.05.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12">1.7.4_B.FM64_R.12 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.05|01.00.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.FM64_R.12.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.10.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Tachograph FrontPanel improvements<br />
*Additional tachograph parameters added<br />
*AutoCAN reading improvements<br />
* Sleep modes improvements<br />
*Battery charging/discharging improved<br />
*Tracking On demand added<br />
*LVCAN DTC codes reading improvements<br />
* 1Wire TSH202 multiple sensors support added<br />
*Periodical TSM232 SBD records saving improvements<br />
*TCP buffering to SD card added<br />
*GPRS Remote log improvements<br />
|}<br />
<br />
===For FMB641===<br />
---- <br />
Configurator suitable for: [[FMB641]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.64 B.FM64 R.83"> 1.7.64 B.FM64 R.83 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB641 firmware errata#02.02.17.Rev.04|02.02.17.Rev.04]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.64 B.FM64 R.83.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.06.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.55_B.FM64_R.73"> 1.7.55_B.FM64_R.73 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB641 firmware errata#02.02.16.Rev.03|02.02.16.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.55 B.FM64 R.73.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.02.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
|}<br />
<br />
===For FMC640 & FMM640===<br />
---- <br />
Configurator suitable for: [[FMC640]], [[FMM640]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CHANGES<br />
|-<br />
<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.64_B.FM64_R.88"> 1.7.64_B.FM64_R.88 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.02.27.Rev.06|01.02.27.Rev.06]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.64 B.FM64 R.88.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.07.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.58"> 1.7.4_B.FM64_R.58 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC640 firmware errata#01.02.22.Rev.02| FMC640 => 01.02.22]] <br> [[FMM640 firmware errata#01.02.22.Rev.02| FMM640 => 01.02.22]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.40 B.FM64 R.58.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.08.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
*Fixed RS485 settings<br />
|-<br />
<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12"> 1.7.17_B.FM64_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.13|01.00.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.17_B.FM64_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.05.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.FM64_R.12">1.7.4_B.FM64_R.12 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#01.00.05|01.00.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.FM64_R.12.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.10.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Tachograph FrontPanel improvements<br />
*Additional tachograph parameters added<br />
*AutoCAN reading improvements<br />
*Sleep modes improvements<br />
*Battery charging/discharging improved<br />
*Tracking On demand added<br />
*LVCAN DTC codes reading improvements<br />
*1Wire TSH202 multiple sensors support added<br />
*Periodical TSM232 SBD records saving improvements<br />
*TCP buffering to SD card added<br />
*GPRS Remote log improvements<br />
|}<br />
<br />
=== For FMC650 ===<br />
---- <br />
Configurator suitable for: [[FMC650]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.70_B.FM64_R.104"> 1.7.70_B.FM64_R.104 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC650_firmware_errata#Firmware_versioning| 03.00.15.Rev.09]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.70 B.FM64 R.104.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|}<br />
<br />
=== For FMM650===<br />
---- <br />
Configurator suitable for: [[FMM650]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.70 B.FM64 R.104"> 1.7.70 B.FM64 R.104 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC650_firmware_errata#Firmware_versioning| 03.00.15.Rev.09]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.70 B.FM64 R.104.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and general bug fixes<br />
|}<br />
<br />
===For FMU1YX/FMC1YX/FMM1YX Series===<br />
----<br />
Configurator suitable for: [[FMC125]], [[FMC130]], [[FMM125]], [[FMM130]], [[FMU125]], [[FMU126]], [[FMU130]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.11"> 1.7.72_B.3.29_R.11 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.29.00.Rev.14|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.11.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.12.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Virtual DIN2 added for FMB910 configuration<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.10"> 1.7.72_B.3.29_R.10 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMC130 firmware errata #03.29.00.Rev.13|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023.11.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Added OEM IO params and VIN configuration<br />
*Added SECO functionality<br />
*Added Advanced pulse counters<br />
*Added Support Low Power Mode<br />
*Added functionality to keep Bluetooth® on during sleep<br />
*Added periodic wakeup during sleep<br />
*Added ability to disable GPRS Authentication<br />
*Added new EYE Sensor/Beacon configurable settings<br />
*Added GNSS Jamming<br />
*Added Private/Business functionality <br />
*Added Backup tracking feature <br />
*Parsed CAN Security flags parameters<br />
*Extended Sensor preset<br />
*Updated default parameter values <br />
*SMS events moved to a separate tab<br />
*Removed OBDII settings from non-OBD devices<br />
*Fixed duplicate OBDII parameters<br />
*Fixed mismatching and missing parameter ID's<br />
*Configurator optimization and stability improvements<br />
*Added 1-Wire interface control in Sleep modes feature<br />
*Configurator supports only 64-bit systems<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMM125 firmware errata#03.27.13.Rev.03|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.4"> 1.7.30_E.SLM320JAMMING_R.4 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125 firmware errata#Firmware versions|03.27.13.Rev.443]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.4.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.12.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.3"> 1.7.30_E.SLM320JAMMING_R.3 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125 firmware errata#Firmware versions|03.27.13.Rev.57]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/1.7.30_E.SLM320JAMMING_R.3.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.05.04<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added FMC125 with SLM320 module support<br />
*Added SMS via LTE support for hardware`s with SLM320 modules<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.2"> 1.7.30_E.SLM320JAMMING_R.2 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC130 firmware errata#Firmware versions|03.27.13.Rev.54]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.03.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added Jamming support for FMC130 hardware with SLM320-L module<br />
*Fixed NITZ time synchronization with SLM320 modules<br />
*Fixed connection to operator issue<br />
*Added FMC125 with SLM320 hardware support<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_B.3.27_R.28"> 1.7.30_B.3.27_R.28 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM230 firmware errata#Firmware versions|03.27.12.Rev.12]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.28.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.02.21<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMM230, FMC230, FMC225, FMB230, FMB225, FMB240 support<br />
*Fixed manual frequency bands configuration for FMMx30 devices<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=" id="1.7.30_B.3.27_R.26"> 1.7.30_B.3.27_R.26 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_ errata#03.27.10.Rev.02|03.27.10.Rev.02]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.26.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.11.11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added Green/Eco driving calculator<br />
*Extended FOTA WEB check period to 12h<br />
*Other minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_ errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
* Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.4_B.3.27_R.13"> 1.7.4_B.3.27_R.13 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.04.Rev.01]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.13.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.03.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.4_B.3.27_R.12"> 1.7.4_B.3.27_R.12 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.03.Rev.02]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.12.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.01.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_B.3.27_R.9"> 1.7.4_B.3.27_R.9 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.02.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.10.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.7.4_B.3.27_R.7"> 1.7.4_B.3.27_R.7 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMU130_firmware_errata|03.27.02.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_B.3.27_R.7.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.09.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.4.10_C_160"> 1.4.10_C_160 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FM*1YX firmware errata|03.25.10.Rev.175]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.4.10 C 160.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2019.12.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Minor improvements<br />
*Added support for FMU1YX,FMC1YX,FMM1YX devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMB140===<br />
----<br />
Configurator suitable for: [[FMB140]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140_firmware_errata|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.05.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140_firmware_errata|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
<span class="mw-headline" id="1.6.4_E.fmb14x_R.2"> 1.6.4_E.fmb14x_R.2 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140_firmware_ errata#03.27.07.Rev.00|03.25.16.Rev.410]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.6.4_E.fmb14x_dev_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.12.10<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Odometer calculation from CAN data improvements<br />
|}<br />
<br />
===For FMx150 series===<br />
----<br />
Configurator suitable for: [[FMB150]], [[FMC150]], [[FMM150]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.47_E.FMB150_R.4"> 1.7.47_E.FMB150_R.4 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB150_firmware_errata|03.28.03.Rev.155]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.47 E.FMB150 R.4.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.09.06<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.53_E.FMB150_R.10"> 1.7.53_E.FMB150_R.10 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150_firmware_errata|03.28.06.Rev.152]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.53 E.FMB150 R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.01.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.54_E.FMX150_R.1"> 1.7.54_E.FMX150_R.1 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150_firmware_errata|03.28.07.Rev.152]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.54 E.FMX150 R.1.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.05.03<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.54_E.FMX150_R.1"> 1.7.74_E.FMX150_R.9 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150_firmware_errata|03.28.07.Rev.159]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.74 E.FMX150 R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*OEM file download via configurator added<br />
|}<br />
<br />
===For FMC001===<br />
----<br />
Configurator suitable for: [[FMC001]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001_firmware_errata|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.05.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.28"> 1.7.30_B.3.27_R.28 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001_firmware_ errata#03.27.12.Rev.00|03.27.12.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.28.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.02.09<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Preferred Operator functionality improvements<br />
*SLM320 modem support added<br />
*BLE advanced beacon improvements<br />
*Static navigation improvements<br />
*GNSS improvements<br />
*New OBD Data MCU support added<br />
*Improved system stability and fixed general bugs<br />
|-<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001_firmware_ errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.5.6_C_084"> 1.5.6_C_084</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001 firmware errata|03.25.15.Rev.88]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.5.6 C 084.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.03.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMC001,FMM001 devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMM001===<br />
----<br />
Configurator suitable for: [[FMM001]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30 B.3.27 R.29"> 1.7.30 B.3.27 R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001_firmware_ errata#03.27.13.Rev.01|03.27.13.Rev.01]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 B.3.27 R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.06<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.34_E.FMB002-3-20_R.110"> 1.7.34_E.FMB002-3-20_R.110</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001 firmware errata|03.27.12.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.34 E.FMB002-3-20 R.110.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.03.17<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.22_B.3.27_R.21"> 1.7.22_B.3.27_R.21 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001_firmware_ errata#03.27.07.Rev.00|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_B.3.27_R.21.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.08.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Universal beacon support (visualization from Configurator)<br />
*Added inverted DOUT functionality selection<br />
*Added BLE AES128 encryption tab<br />
*Replaced Eventual beacon record with On Change record<br />
*Beacon record priority selection<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.5.6_C_084"> 1.5.6_C_084</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001 firmware errata|03.25.15.Rev.88]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.5.6 C 084.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.03.16<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMC001,FMM001 devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC00A, FMM00A series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC00A]], [[FMM00A]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="E.FMX00A_R.2"> E.FMX00A_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC00A firmware errata|03.27.12.Rev.143]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/E.FMX00A R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.06.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
=== For FMB003, FMB002, FMB020 Series===<br />
----<br />
Configurator suitable for: [[FMB003]] & [[FMB002]] & [[FMB020]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.34_E.FMB002-3-20_R.110"> 1.7.34_E.FMB002-3-20_R.110</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata|03.27.12.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.34 E.FMB002-3-20 R.110.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.03.17<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.22_E.fmb003-002-020_R.104"> 1.7.22_E_R.104</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata|03.27.07.Rev.94]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.22_E.fmb003-002-020_R.104.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.09.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added OEM IO parameters and VIN configuration<br />
*Other minor improvements<br />
<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.4_E_R_99"> 1.7.4_E_R_99</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata|03.25.15.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.4_E.fmb002-3_R.99.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.12.02<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMB003,FMB002, FMB020 devices<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMP100===<br />
----<br />
Configurator suitable for: [[FMP100]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.5.7_C_094"> 1.7.21_E.FMP100_R.6</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMP100 firmware errata|03.27.07.Rev.461]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.21_E.FMP1_R.6.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021.10.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added BLE Netronix RFID and Buttons support<br />
*Other minor improvements<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.5.7_C_094"> 1.6.4_E.FMP100_R.1</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMP100 firmware errata|03.25.15.Rev.132]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.6.4_E.FMP100_R.1.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2020.09.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMP100<br />
*Added Private/Business mode<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For IP67 Series===<br />
----<br />
Configurator suitable for: [[FMB230]], [[FMB240]], [[FMB225]], [[FMM230]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 35%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_B.3.27_R.29"> 1.7.30_B.3.27_R.29 </span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[FMB firmware errata#03.27.13.Rev.03|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_B.3.27_R.29.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.06.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Improved system stability and fixed general bugs<br />
|-<br />
|}<br />
<br />
Configurator suitable for: [[FMC225]], [[FMC230]], [[FMC234]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 35%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_E.FMC234_R.5"> 1.7.72_E.FMC234_R.5</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC234 firmware errata|03.29.00.Rev.601]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.72 E.FMC234 R.5.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2024.02.19<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*FMC234 support<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.4"> 1.7.30_E.SLM320JAMMING_R.4</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC230 firmware errata|03.27.13.Rev.443]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.4.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.12.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Improved system stability and fixed general bugs<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.3"> 1.7.30_E_R.3</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC225 firmware errata|03.27.13.Rev.57]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.30 E.SLM320JAMMING R.3.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022.05.11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.30_E.SLM320JAMMING_R.2"> 1.7.30_E_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC230 firmware errata|03.27.13.Rev.54]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.30_E.SLM320JAMMING_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMB930===<br />
----<br />
Configurator suitable for: [[FMB930|FMB930,]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.60_E.FMB9YX_R.15"> 1.7.60_E.FMB9YX_R.15</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB930 firmware errata|03.27.10.Rev.482]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/E.FMB9YX R.15.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.05.08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Initial Release<br />
|-<br />
|}<br />
===For FMB965===<br />
----<br />
Configurator suitable for: [[FMB930|FMB930,]] [[FMB965]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.60_E.FMB9YX_R.17"> 1.7.60_E.FMB9YX_R.17</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB965 firmware errata|03.27.10.Rev.487]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.60_E.FMB9YX_R.17.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Wakeup sources added<br />
*Wakeup source dependency added<br />
*Configuration mismaches fixed<br />
*Sleep settings tooltip updated<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.30_E.FMB9YX_R.8"> 1.7.30_E.FMB9YX_R.9</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB965 firmware errata|03.27.10.Rev.464]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/E.FMB9YX R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <br />
*Initial Release<br />
|-<br />
|}<br />
<br />
=== For FMC920, FMM920 series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC920]], [[FMM920]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.72_B.3.29_R.10"> 1.7.72_B.3.29_R.10</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.72_B.3.29_R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.11.24<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.38_E.FMC920_R.9"> 1.7.38_E.FMC920_R.9</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata|03.28.02.Rev.197]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.38 E.FMC920 R.9.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.04.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=""mw-headline" id="1.7.38_E.FMC920_R.8"> 1.7.38_E.FMC920_R.8</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata|03.28.02.Rev.195]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.38 E.FMC920 R.8.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.12.15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=""mw-headline" id="1.7.38_E.FMC920_R.8"> 1.7.38_E.FMC920_R.8</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM920 firmware errata|03.28.02.Rev.192]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.38 E.FMC920 R.8.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.12.15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id=""mw-headline" id="1.7.38_E.FMC920_R.2"> 1.7.38_E.FMC920_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM920 firmware errata|03.28.02.Rev.85]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.38_E.FMC920_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.07.13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC003, FMM003 series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC003]], [[FMM003]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.53_E.FMX00X_R.6"> 1.7.53_E.FMX00X_R.6</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC003 firmware errata|03.28.03.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.53 E.FMX00X R.6.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.02.22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC800, FMM800, FMM80A, FMC880, FMM880 series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC800]], [[FMM800]], [[FMM80A]], [[FMC880]], [[FMM880]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.63_E.FMX8XX_R.2"> 1.7.63_E.FMX8XX_R.2</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.28.07.Rev.353]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.63_E.FMX8XX_R.2.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMC880, FMM880 devices<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.53_E.FMX8X0_R.5"> 1.7.53_E.FMX8X0_R.7</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.28.02.Rev.143]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.53_E.FMX8X0_R.7.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.04.07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Added support for FMM80A device<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
<span class="mw-headline" id="1.7.53_E.FMX8X0_R.5"> 1.7.53_E.FMX8X0_R.5</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.28.02.Rev.126]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_1.7.53_E.FMX8X0_R.5.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.01.12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial Release<br />
|-<br />
|}<br />
<br />
===For FMC13A, FMM13A series===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[FMC13A]], [[FMM13A]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.39_E.3.27_R.91"> 1.7.39_E.3.27_R.91</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata|03.27.13.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.7.39 E.3.27 R.91.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.07.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
|}<br />
<br />
===For GH5200 & TMT250===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[GH5200]], [[TMT250]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.66 B.55.2 R.10.zip"> 1.7.66_B.55.2_R.10</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TMT250|55.02.03.Rev.05]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/1.7.66 B.55.2 R.10.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-30<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*[CHN] Added new AVL ID's SMS events tab<br />
*[FIX] Fixed Online vs Offline configuration discrepancies<br />
*[FIX] Fixed Ultra Deep Sleep naming mismatch<br />
*[FIX] Fixed Tool Tips inaccuracies<br />
*[ADD] Added EYE Sensors support settings and filtering by sensors name and MAC address<br />
*[CHN] Changed device wiki links to teltonika-gps<br />
*[CHN] Moved EYE Sensor I/O settings to Bluetooth 4.0 tab<br />
*[FIX] Fixed Roaming operator/Operator Black List .csv file importing<br />
*[FIX] Fixed Maximum GPS Satellites Quantity parameter (ID: 906) value<br />
*[ADD] Added configurable accelerometer sensitivity settings<br />
*[ADD] Added continuous battery charging mode<br />
*[CHN] Changed minimum BLE scan start period value<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.6.11 R.39"> 1.6.11 R.39</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TMT250|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.6.11 R.39.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.09.14<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*[CHN] Renamed Universal Beacons feature to BLE Devices<br />
*[CHN] Changed TMT250/GH5200 default configuration<br />
|-<br />
|}<br />
<br />
===For MSP500===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[MSP500]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.4.9 C.002"> 1.4.9 C.002</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[MSP500 firmware errata|03.25.05.Rev.127]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.4.9 C.002.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.07.05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT SUPPORTED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
|}<br />
<br />
===For TAT1YX series===<br />
----<br />
Configurator suitable for: [[TAT100]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.16_E.TAT100.R23 RELEASE"> 1.7.16_E.TAT100.R23 RELEASE</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT100|55.00.16.Rev.545]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/TAT100 Teltonika.Configurator 1.7.16 E.TAT100.R23 RELEASE.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.08.23<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*Initial release<br />
|-<br />
|}<br />
<br />
Configurator suitable for: [[TAT140]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.16_B.TAT1_.R3"> 1.7.16_B.TAT1_.R3</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT140|55.00.16.Rev.558]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/TAT1_teltonika.Configurator_1.7.16_B.TAT1_R3.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.07.18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Removed non configurable elements<br />
|-<br />
|}<br />
<br />
Configurator suitable for: [[TAT240]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.7.74_B.TAT1_.R.6"> 1.7.74_B.TAT1_.R.6</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT240|55.00.16.Rev.562]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator_TAT_1.7.74_B.TAT1_R.6.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.12.20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Initial release<br />
|-<br />
|}<br />
<br />
[[Category:Teltonika Configurator]]<br />
<br />
===For TFT100 & TST100===<br />
----<br />
[[Category:Teltonika Configurator]]<br />
Configurator suitable for: [[TFT100]], [[TST100]]<br />
{| class="wikitable" style="width: 100%;"<br />
|+<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CONFIGURATOR VERSION<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FILE FORMAT<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DATE<br />
! style="width: 5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |LANGUAGE<br />
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | TCT SUPPORT<br />
! style="width: 40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
[[File:Conf_release.png|20px|link=]]<span class="mw-headline" id="1.6.11_R.39"> 1.6.11_R.39</span><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TFT100_Stable_firmware|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/Teltonika.Configurator 1.6.11 R.39.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022.09.09<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |EN, RU<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | NOT PLANNED<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
*[CHN]: Changed Default and Minimum CAN Command period. Changed tooltips.<br />
*[ADD]: Add timestamp backup description<br />
*[CHN]: Corrected misleading and outdated tooltips<br />
*[CHN]: Changed TFT100 default configuration.<br />
*[ADD]: Added CAN I/O reset parameter.<br />
*[ADD]: Govecs FLEX (TFT100) changes were merged into 7.0.33 version.<br />
*[ADD]: Added AES128 BLE encryption KEY parameter<br />
*[CHN]: Updated tooltip description for DOUT Deactivation Via DIN<br />
|-<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=File:Teltonika.Configurator_1.7.72_E.FMC234_R.5.zip&diff=95990File:Teltonika.Configurator 1.7.72 E.FMC234 R.5.zip2024-02-20T09:26:13Z<p>Deividas.Darulis: </p>
<hr />
<div></div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Firmware_versions&diff=95989Firmware versions2024-02-20T09:21:20Z<p>Deividas.Darulis: /* ADVANCED trackers */</p>
<hr />
<div>===BASIC trackers===<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB900]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB900 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB910]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB910 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB920]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-11-21<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.14.Rev.00 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB920 firmware errata#Firmware versions|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-19<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.13_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC920 firmware errata#Firmware versions|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC920.2C FMM920 series|1.7.72_B.3.29_R.10]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM920]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-06-07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.02.Rev.197_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM920 firmware errata#Firmware versions|03.28.02.Rev.197]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC920.2C FMM920 series|1.7.38_E.FMC920_R.9]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB930]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023-05-08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.10.Ver.482 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB930 firmware errata#Firmware versions|03.27.10.Rev.482]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB930|1.7.60_E.FMB9YX_R.15]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB965]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2023-12-22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.10.Rev.487 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB965 firmware errata#Firmware versions|03.27.10.Rev.487]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB965|1.7.60_E.FMB9YX_R.17]]<br />
|}<br />
<br />
==FAST & EASY trackers==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMP100]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-09-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.04.Rev.273 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMP100 firmware errata#Firmware versions|03.28.04.Rev.273]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMP100|1.7.61_E.fmp100_eco_R.3]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB010]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB010 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB020]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-09-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.04.Rev.273 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB020 firmware errata#Firmware versions|03.28.04.Rev.273]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB003.2C FMB002.2C FMB020 Series|1.7.61_E.fmp100_eco_R.3]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-09-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.07.Rev.353 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC800 firmware errata#Firmware versions|03.28.07.Rev.353]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC880.2C FMM880 series|1.7.63_E.FMX8XX_R.2]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM800]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-09-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.07.Rev.353 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM800 firmware errata#Firmware versions|03.28.07.Rev.353]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC880.2C FMM880 series|1.7.63_E.FMX8XX_R.2]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM80A]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-09-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.07.Rev.353 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM80A firmware errata#Firmware versions|03.28.07.Rev.353]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC880.2C FMM880 series|1.7.63_E.FMX8XX_R.2]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMT100]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMT100 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC880]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-10-01<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.07.Rev.354 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC880 firmware errata#Firmware versions|03.28.07.Rev.354]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC880.2C FMM880 series|1.7.63_E.FMX8XX_R.2]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM880]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-09-01<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.07.Rev.353 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM880 firmware errata#Firmware versions|03.28.07.Rev.353]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC880.2C FMM880 series|1.7.63_E.FMX8XX_R.2]]<br />
|-] <br />
|}<br />
<br />
==ADVANCED trackers ==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE TO FACTORY DATE<br />
! style="width: 16%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB110]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-08-11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB110 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB120]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-10-26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.14.Rev.00 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB120 firmware errata#Firmware versions|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB122]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-08-11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB122 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB125]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-08-11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB125 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB130]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-10-26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.14.Rev.00 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB130 firmware errata#Firmware versions|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125]]<br />
<small>(SLM320)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.14_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125 firmware errata#Firmware versions|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.72_B.3.29_R.11]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125]]<br />
<small>(EC21)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-02-08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC125 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.30_B.3.27_R.29]]<br />
|-<br />
<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC130]]<br />
<small>(SLM320)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.13_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC130 firmware errata#Firmware versions|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.72_B.3.29_R.10]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC130]]<br />
<small>(EC21)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-02-08<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC130 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC13A]]<br />
<small>(SLM320)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.14_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC13A firmware errata#Firmware versions|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.72_B.3.29_R.11]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM125]]<br />
<small>(BG-96)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021-08-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.07.Rev.00 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM125 firmware errata#Firmware versions|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.22_B.3.27_R.21]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM125]]<br />
<small>(BG95-M3)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-08-17<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.14.Rev.00 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM125 firmware errata#Firmware versions|03.27.14.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM130]]<br />
<small>(BG-96)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2021-08-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.07.Rev.00 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM130 firmware errata#Firmware versions|03.27.07.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.22_B.3.27_R.21]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM130]]<br />
<small>(BG95-M3)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.14_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM130 firmware errata#Firmware versions|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.72_B.3.29_R.11]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM13A]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-01-21<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.03.27.13.Rev.93 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM13A firmware errata#Firmware versions|03.27.13.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_FMC13A.2C_FMM13A_series|1.7.39_E.3.27_R.91]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[MSP500]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2019-11-27<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.03.25.05.Rev.127 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[MSP500 firmware errata#Firmware versions|03.25.05.Rev.127]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;"|[[Teltonika_Configurator_versions#For_MSP500|1.2.5_C.097]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB202]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB202 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB204]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB204 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB225]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-09-12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB225 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For IP67 Series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB230]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-09-12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB230 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For IP67 Series|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC225]]<br />
<small>(SLM320)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.14_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC225 firmware errata#Firmware versions|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.72_B.3.29_R.11]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC230]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.13_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC230 firmware errata#Firmware versions|03.29.00.Rev.13]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For IP67 Series|1.7.72_B.3.29_R.10]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC234]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-02-19<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/03.29.00.Rev.601 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC234 firmware errata#Firmware versions|03.29.00.Rev.601]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For IP67 Series|1.7.72_E.FMC234_R.5]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM230]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2024-01-26<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.29.00.Rev.14_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM230 firmware errata#Firmware versions|03.29.00.Rev.14]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMU1YX.2FFMC1YX.2FFMM1YX Series|1.7.72_B.3.29_R.11]]<br />
|}<br />
<br />
== AUTONOMOUS trackers==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TAT100]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-10-19<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/TAT100_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT100|55.00.16.Rev.545]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_TAT100|1.7.16_E.TAT100.R23]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TAT140]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-07-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/TAT140_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT140|55.00.16.Rev.558]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_TAT140|1.7.16_B.TAT1_.R3]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TAT240]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-20<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/TAT240_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TAT140|55.00.16.Rev.562]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_TAT140|1.7.74_B.TAT1_.R6]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TMT250]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-10-05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/TMT250_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TMT250|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_GH5200_.26_TMT250|1.6.11_R.39]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[GH5200]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-09-29<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/GH5200_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#GH5200|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_GH5200_.26_TMT250|1.6.11_R.39]]<br />
|}<br />
<br />
==OBD trackers==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB001]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB001 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB series|1.7.30_B.3.27_R.29]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB002]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-08-11<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.03.27.12.Rev.93 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB002 firmware errata#Firmware versions|03.27.12.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB003.2C FMB002.2C FMB020 Series|1.7.34_E.FMB002-3-20_R.110]]<br />
|-<br />
<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-06-15<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.03.Rev.97 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB003 firmware errata#Firmware versions|03.28.03.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC003.2C FMM003 series|1.7.53_E.FMX00X_R.6]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-09-05<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC001 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC001|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC003]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-04-12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.03.Rev.97 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC003 firmware errata#Firmware versions|03.28.03.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC003.2C FMM003 series|1.7.53_E.FMX00X_R.6]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC00A]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-06-02<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.03.27.12.Rev.143 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC00A firmware errata#Firmware versions|03.27.12.Rev.143]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC00A.2C FMM00A series|1.7.42_E.FMX00A_R.2]]<br />
|-<br />
<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001]]<br />
<small>(BG96)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-03-31<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.01 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001 firmware errata#Firmware versions|03.27.13.Rev.01]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMM001|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001]]<br />
<small>(BG95-M3)</small><br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-03-21<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.03.27.12.Rev.93 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM001 firmware errata#Firmware versions|03.27.12.Rev.93]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMM001|1.7.34_E.FMB002-3-20_R.110]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM003]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-02-06<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.28.03.Rev.97 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM003 firmware errata#Firmware versions|03.28.03.Rev.97]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC003.2C FMM003 series|1.7.53_E.FMX00X_R.6]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM00A]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-06-02<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.12.Rev.143 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM00A firmware errata#Firmware versions|03.27.12.Rev.143]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC00A.2C FMM00A series|1.7.42_E.FMX00A_R.2]]<br />
|}<br />
<br />
==CAN trackers==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-07-25<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB140 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB140|1.7.30_B.3.27_R.29]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB150]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/File:FMB.Ver.03.28.07.Rev.159 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB150 firmware errata#Firmware versions|03.28.07.Rev.159]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMx150 series|1.7.74_E.FMX150_R.9]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/File:FMB.Ver.03.28.07.Rev.159 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC150 firmware errata#Firmware versions|03.28.07.Rev.159]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMx150 series|1.7.74_E.FMX150_R.9]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM150]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-07<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/File:FMB.Ver.03.28.07.Rev.159 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM150 firmware errata#Firmware versions|03.28.07.Rev.159]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMx150 series|1.7.74_E.FMX150_R.9]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB240]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-09-12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMB.Ver.03.27.13.Rev.03 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB240 firmware errata#Firmware versions|03.27.13.Rev.03]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB240|1.7.30_B.3.27_R.29]]<br />
|}<br />
<br />
==PROFESSIONAL trackers==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" | FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-07-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMX640.Ver.01.02.27.Rev.06 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB640 firmware errata#Firmware versions|01.02.27.Rev.06]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB640|1.7.64_B.FM64_R.88]]<br />
|-<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB641]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-06-13<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMX641.Ver.02.02.17.Rev.04 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMB641 firmware errata#Firmware versions|02.02.17.Rev.04]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMB641|1.7.64 B.FM64 R.83]]<br />
|-<br />
<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC640]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-07-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMX640.Ver.01.02.27.Rev.06 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC640 firmware errata#Firmware versions|01.02.27.Rev.06]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika Configurator versions#For FMC640 .26 FMM640|1.7.64_B.FM64_R.88]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC650]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMX65.Ver.03.00.15.Rev.09_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMC650 firmware errata#Firmware versions|03.00.15.Rev.09]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[Teltonika Configurator versions#For FMC650|1.7.70_B.FM64_R.104]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM640]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-12-12<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMX640.Ver.01.02.22.Rev.04 and configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM640 firmware errata#Firmware versions|01.02.22.Rev.04]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[Teltonika Configurator versions#For FMC640 .26 FMM640|1.7.40_B.FM64_R.58]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM650]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023-12-18<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=Special:Redirect/file/FMX65.Ver.03.00.15.Rev.09_and_configurator.zip]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[FMM650 firmware errata#Firmware versions|03.00.15.Rev.09]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | [[Teltonika Configurator versions#For FMM650|1.7.70_B.FM64_R.104]]<br />
|}<br />
<br />
==E-MOBILITY trackers==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DEVICE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE TO FACTORY DATE<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DOWNLOAD<br />
! style="width: 30%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION ERRATA<br />
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |CONFIGURATOR VERSION ERRATA<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TFT100]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | 2022-09-22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/TFT100_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TFT100|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_TFT100_.26_TST100|1.6.11_R.39]]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[TST100]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-09-22<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[File:Download_zip.png|x30px|link=https://wiki.teltonika-gps.com/view/TST100_Stable_firmware]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Stable_Firmware_%26_Software_CHANGELOG#TST100|55.01.10.Rev.00]]<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[[Teltonika_Configurator_versions#For_TFT100_.26_TST100|1.6.11_R.39]]<br />
|-<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_Product_Change_Notifications&diff=95986FMC234 Product Change Notifications2024-02-20T09:00:46Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:Pcn_intro_FM<br />
| product_name = FMC230 tracking device<br />
}}<br />
<br />
==2024.02.19: Base firmware update==<br />
We would like to inform you about the base firmware update for FMC234 starting from 20th of February, 2024. New production firmware version will be '''03.29.00.Rev.601'''<br />
<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="text-align: left; background: white;" |Change description<br />
|-<br />
| style="text-align: left; background: white;" |Change type<br />
| colspan="2" style="text-align: left; background: white;" |Firmware update<br />
|-<br />
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description<br />
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMC234_firmware_errata<br />
|-<br />
| style="text-align: left; background: white;" |Old version: <br> 03.27.13.Rev.811<br />
| style="text-align: left; background: white;" |New version: <br> 03.29.00.Rev.601<br />
|-<br />
| style="text-align: left; background: white;" |Change reasons<br />
| colspan="2" style="text-align: left; background: white;" |FMC234 base firmware version update for modifications with SLM320-LA module and SLM320-E module<br />
<br />
|-<br />
| style="text-align: left; background: white;" | Product release date<br />
| colspan="2" style="text-align: left; background: white;" |2024 February<br />
|-<br />
|}<br />
<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="text-align: left; background: white;" |Affected products<br />
|-<br />
| style="width: 221px; text-align: left; background: white;" |Model<br />
| style="width: 448px; text-align: left; background: white;" |Affected order codes<br />
| style="width: 448px; text-align: left; background: white;" |Order code changes<br />
|-<br />
| style="text-align: left; background: white;" |FMC234<br />
| style="text-align: left; background: white;" |FMC234******* with 03.27.13.Rev.811 will be replaced to FMC234******* with base firmware<br />
| style="text-align: left; background: white;" |New firmware version<br />
|-<br />
|}<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="text-align: left; background: white;" |Change impact<br />
|-<br />
| style="width: 221px; text-align: left; background: white;" |Risk assessment<br />
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client’s special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.<br />
|-<br />
| style="text-align: left; background: white;" |Suggested implementation plan<br />
| colspan="2" style="text-align: left; background: white;" |If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.<br />
|-<br />
|}<br />
<br />
==2024.01.22: Modified battery placement within the casing==<br />
We would like to inform you that starting from January 2024, there will be a small change in the FMC234 devices casing. We have adjusted the battery placement and increased PCB guide height within casing. This modification was essential to enhance our manufacturing process.<br />
<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="text-align: left; background: white;" |Change description<br />
|-<br />
| style="text-align: left; background: white;" |Change type<br />
| colspan="2" style="text-align: left; background: white;" |Optimizing robotic battery placement process within casing<br />
|-<br />
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description<br />
| colspan="2" style="width: 908px; text-align: left; background: white;" |The modifications will not impact the place of the battery or PCB within the FMC234 device.<br />
|-<br />
| style="text-align: left; background: white;" |Old Version: [[File:FMX - OLD.jpg|center|250px]] <br />
| style="text-align: left; background: white;" |New Version: [[File:FMX - NEW.jpg|center|250px]] [[File:FMX - NEW 2.jpg|center|250px]] <br />
|-<br />
| style="text-align: left; background: white;" |Change reasons<br />
| colspan="2" style="text-align: left; background: white;" |<br />
# Modified battery placement within the casing.<br />
# PCB guide height increased for easier assembly.<br />
# Improved manufacturing process.<br />
|-<br />
| style="text-align: left; background: white;" |Product release date<br />
| colspan="2" style="text-align: left; background: white;" |January, 2024<br />
|-<br />
|}<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="text-align: left; background: white;" |Affected products<br />
|-<br />
| style="width: 221px; text-align: left; background: white;" |Model<br />
| style="width: 448px; text-align: left; background: white;" |Affected order codes<br />
| style="width: 448px; text-align: left; background: white;" |Order code changes<br />
|-<br />
| style="text-align: left; background: white;" |FMC234 <br />
| style="text-align: left; background: white;" |FMC234 all codes<br />
| style="text-align: left; background: white;" | Modified battery placement and PCB guide height within the casing.<br />
|-<br />
|}<br />
<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="text-align: left; background: white;" |Change impact<br />
|-<br />
| style="width: 221px; text-align: left; background: white;" |Risk assessment<br />
| colspan="2" style="width: 908px; text-align: left; background: white;" |During transition period clients might receive devices with previous casing design. The transition period can last from January to February inclusive.<br />
|-<br />
| style="text-align: left; background: white;" |Suggested implementation plan<br />
| colspan="2" style="text-align: left; background: white;" |No implementation plan is needed.<br />
|-<br />
|}<br />
<br />
{| class="wikitable"<br />
|+<br />
! colspan="3" style="width: 1141px; text-align: left; background: white;" |Acknowledgement of PCN receipt<br />
|-<br />
| colspan="3" style="text-align: left; background: white;" |If no feedback is received within two weeks after the issue date of this notification – Teltonika may accept that this change has tactically accepted and can implement the change as indicated above.<br />
|}<br />
<br />
[[Category:FMC234]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95985FMC234 firmware errata2024-02-20T08:19:56Z<p>Deividas.Darulis: /* Introduction */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
|-<br />
!03.29.XX<br />
|FMC234<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[FMC234 Bluetooth® 4.0 settings|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95984FMC234 firmware errata2024-02-20T08:19:35Z<p>Deividas.Darulis: /* Introduction */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.29.XX<br />
|FMC234<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[FMC234 Bluetooth® 4.0 settings|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95983FMC234 firmware errata2024-02-20T08:19:14Z<p>Deividas.Darulis: /* Introduction */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|-<br />
!03.29.XX<br />
|FMC234<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[FMC234 Bluetooth® 4.0 settings|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95982FMC234 firmware errata2024-02-20T08:03:51Z<p>Deividas.Darulis: /* Firmware versions */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[FMC234 Bluetooth® 4.0 settings|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95981FMC234 firmware errata2024-02-20T07:58:31Z<p>Deividas.Darulis: /* Firmware versions */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Bluetooth_4.0_settings#Backup_Tracker|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95980FMC234 firmware errata2024-02-20T07:57:06Z<p>Deividas.Darulis: /* Firmware versions */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024.02.19}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Bluetooth_4.0_settings#Backup_Tracker|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMC234_firmware_errata&diff=95979FMC234 firmware errata2024-02-20T07:55:51Z<p>Deividas.Darulis: /* Firmware versions */</p>
<hr />
<div>__TOC__<br />
===Introduction===<br />
We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.<br />This document describes '''FMCXXX, FMUXXX, FMMXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.<br />
<br />
<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 80%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |SUPPORTED HARDWARE<br />
|-<br />
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.25.XX<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FMC1YX, FMU1YX, FMM1YX<br />
|-<br />
!03.27.XX<br />
|FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2XY, FMT100, FMC2XY<br />
|}<br />
<br />
===Firmware versioning===<br />
<br />
*Structure<br />
<br />
FMB(T).VER.[<code>XX</code>].[<code>YY</code>].[<code>ZZ</code>].Rev.[<code>##</code>] _[<code>ID###</code>]<br />
<br />
*Syntax description<br />
**<code>XX</code> – major FW version.<br />
**<code>YY</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.<br />
**<code>ZZ</code> – major changes like bigger fixes, improvements and new features addition.<br />
**<code>##</code> – minor changes like small fixes and improvements.<br />
**<code>ID[###]</code> – Spec ID KEY – Specific clients FW changes.<br />
<br />
===Firmware versions===<br />
[[Category:FMC234]]<br />
{| style="width: 100%;"<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION<br />
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE<br />
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES<br />
|-<br />
|style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="03.29.00.Rev.601">{{{fw|'''03.29.00.Rev.601'''}}}</span><br /> (recommended for FMC234 with SLM320-LA, SLM320-E)<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023.11.24}}}<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon and EYE Sensor easy configuration]]''' functionalities added<br />
* '''NEW!''' '''[[EYE_SENSOR_/_BTSMP1#Teltonika_configurator_new_functionalities_.28Evaluation_firmware_.2F_EYE_Sensor_filtering_by_name.29|TELTONIKA EYE Beacon Lost & Found and Proximity Event]]''' functionalities added<br />
* '''NEW!''' '''[[Secure_vehicle_disabling|SECO]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Bluetooth_4.0_settings#Backup_Tracker|Back-Up Tracker]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_Features_settings#GNSS_Jamming|GNSS jamming]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#Low_Power_Mode|Low Power Mode]]''' functionality added<br />
* '''NEW!''' MQTT support for '''[[Getting_Started_with_AWS_IoT_Core|AWS IoT Shadow/Custom]]''' and '''[[Getting_started_with_Azure_IoT_hub|Azure IoT]]''' added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#The_1-wire_enabled_in_DS_and_ODS|1-Wire interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[{{{name|}}}_System_settings#BT.2FBLE_module_OFF_during_Sleep_modes|BT/BLE interface control in sleep modes]]''' functionality added<br />
* '''NEW!''' '''[[NBL-2|NBL-2 Bluetooth RFID reader]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_lvcanhorn|"lvcanhorn"]]''' support added<br />
* '''NEW!''' SMS/GPRS command '''[[FMB_setigndigout|"setigndigout"]]''' added<br />
* '''NEW!''' Jamming feature support added for FMC234 devices with MeiG modems<br />
* '''NEW!''' '''[[{{{name|}}}_Parameter_list#LVCAN|CAN service and LPG I/O elements]]''' added<br />
* '''NEW!''' New I/O elements for each CAN adapter state flag added<br />
* '''CHANGED!''' Reworked recalibration logic<br />
* '''CHANGED!''' '''[[Parameters_Update|Default parameter values]]'''<br />
* '''CHANGED!''' '''[[{{{name|}}}_SMS_events|SMS Event]]''' logic reworked<br />
* '''CHANGED!''' Black list functionality reworked<br />
* '''CHANGED!''' SMS/GPRS command '''[[FMB_cpureset|"cpureset"]]''' protection functionality<br />
* '''CHANGED!''' '''[[Advanced_Pulse_Counter|Pulse Counter]]''' reworked<br />
* 1-Wire Temperature sensor stability improvements<br />
* Operator search procedure functionality improvements<br />
* Record saving and sending improvements<br />
* DOUT state saving improvements<br />
* GPRS Session and PDP Context Activation logic improvements<br />
* Trip state saving improvements<br />
* CAN data reading improvements<br />
* BLE data reading stability improvements<br />
* TimeSync, SMS handling and connection stability improvements for FMC234 device<br />
* AutoAPN multiple block file improvement for larger database capacity<br />
* Manufacture testing improvements<br />
* Improved system stability and fixed general bugs<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline"<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |03.27.13.Rev.811</br> (recommended for FMC234 with SLM320-LA, SLM320-E2) <br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2023.09.28<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<br />
* Added FMC234 suport<br />
* Added support for 1000 mAh battery<br />
* Improved system stability and fixed general bugs<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=80574Template:FMB Features settings2023-02-28T07:55:46Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.PNG|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
==GNSS Jamming==<br />
<br />
<br />
[[Image:GNSS_Jamming.PNG|{{{general|size}}}|right]]<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
Eventual Records parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 but available on 5.10, 5.1.5, 5.1.8 or newer GNSS module firmware versions. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input) or by turning on the ignition. Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78792Template:FMB Features settings2022-12-23T13:51:33Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
<br />
[[Image:GNSS_Jamming.PNG|{{{general|size}}}|right]]<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
Eventual Records parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78791Template:FMB Features settings2022-12-23T13:50:23Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
<br />
[[Image:GNSS_Jamming.PNG|{{{general|size}}}|right]]<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78790Template:FMB Features settings2022-12-23T13:50:09Z<p>Deividas.Darulis: </p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
<br />
[[Image:GNSS_Jamming.PNG|{{{general|size}}}|right]]<br />
<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=File:GNSS_Jamming.PNG&diff=78789File:GNSS Jamming.PNG2022-12-23T13:48:50Z<p>Deividas.Darulis: </p>
<hr />
<div></div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78788Template:FMB Features settings2022-12-23T13:47:02Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78787Template:FMB Features settings2022-12-23T13:46:46Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78786Template:FMB Features settings2022-12-23T13:45:25Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78785Template:FMB Features settings2022-12-23T13:44:44Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
*0 - No Jamming,<br />
<br />
*1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
*2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules. Available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.'''<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78784Template:FMB Features settings2022-12-23T13:44:13Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
0 - No Jamming,<br />
<br />
1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
<br />
2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules. Available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.'''<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78783Template:FMB Features settings2022-12-23T13:43:02Z<p>Deividas.Darulis: /* GNSS Jamming */</p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
<br />
0 - No Jamming,<br />
1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules. Available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78782Template:FMB Features settings2022-12-23T13:42:08Z<p>Deividas.Darulis: </p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
0 - No Jamming,<br />
1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules. Available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB_Features_settings&diff=78781Template:FMB Features settings2022-12-23T13:40:36Z<p>Deividas.Darulis: </p>
<hr />
<div>==Eco/Green Driving==<br />
<br />
[[Image:EcoGreen_Drivings.PNG|{{{general|size}}}|right]]<br />
<br />
When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below.<br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Scenario Settings</td><br />
<td style="width: 8%; text-align:left">Enable/Disable Green driving functionality</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while accelerating without triggering harsh acceleration event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Braking Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while braking without triggering harsh braking event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Max Cornering Acceleration</td><br />
<td style="width: 8%; text-align:left">Value which can be reached while cornering without triggering harsh cornering event.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Source</td><br />
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td><br />
</tr><br />
{{{txt_advanced|<tr><br />
<td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td><br />
<td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td><br />
</tr>}}}<br />
<tr><br />
<td style="width: 8%; text-align:left">Eco/Green Driving Duration</td><br />
<td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td><br />
</tr><br />
{{{txt_ecodout|<tr><br />
<td style="width: 8%; text-align:left">Output Control</td><br />
<td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td><br />
</tr><br />
<tr><br />
<br />
</tr>}}}<br />
<!--<tr><br />
<td style="width: 8%; text-align:left">Send SMS to</td><br />
<td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">SMS Text</td><br />
<td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td><br />
</tr> --><br />
</table><br />
<br />
{{{FMT100_eco|==Advanced Eco Driving==<br />
<br />
From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. <br />
<br />
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''.<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Average</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">Eco Driving Maximum</td><br />
<td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td><br />
</tr><br />
</table>}}}<br />
<br />
===Data output===<br />
----<br />
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube><br />
<br />
===Auto calibration===<br />
----<br />
The auto-calibration process is as follows:<br />
<br />
#The vehicle is stopped.<br />
#There is a straight road ahead.<br />
#Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.<br />
#Accelerate to >30 km/h for 5 sec.<br />
#{{{model_2|FMB}}} will send a response when calibration is completed successfully.<br />
<br />
Calibration is saved to internal flash memory, which means it will stay after a reset.<br />
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.<br />
<br />
==Over Speeding==<br />
<br />
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed. <br />
Configurable parameters:<br />
[[Image:OverSpeeding.gif|{{{general|size}}}|right]] <br />
<br /><br />
*Scenario settings – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.<br />
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur. <br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.<br />
*Send SMS to – the GSM number to which the SMS event will be sent.<br />
*SMS text – SMS text.<br />
<br /><br />
{{{jamming1|<br />
==Jamming==<br />
<br />
<br />
[[Image:Jamming.gif|{{{general|size}}}|right]]<br />
<br />
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. <br />
<br />
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.<br />
<br />
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.<br />
<br />
It can also be connected to the central lock system to ensure that all the doors are locked.<br />
<br />
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.<br />
<br />
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.<br />
<br />
'''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.'''<br />
<br />
''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. <br />
<br />
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]'''<br />
}}}<br />
<br />
{{{GNSS jamming1|<br />
==GNSS Jamming==<br />
<br />
GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio. <br />
When a device detects GNSS signal jamming, it activates the GNSS Jamming scenario. The device then generates and sends a record to the server, depending on hardware model activates Digital Output and optionally sends SMS notification to configured GSM number. After device regains GNSS signal, Digital Output is immediately deactivated and a new record is sent to the server. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GNSS signal jamming to steal your vehicle.<br />
GNSS Jamming record is stored in AVL ID 318 parameter and has 3 possible values:<br />
0 - No Jamming,<br />
1 - Jamming warning status, which means that signal and accuracy is disrupted but device is able to hold GPS fix for at least 5 seconds.<br />
2 - Jamming critical status, which means that device is not able to acquire GPS fix.<br />
Worth mentioning, that Jamming Detection can go from any state to any other in 1 second intervals. It is completely dependent on received NMEA data by GNSS receiver. Therefore, it is possible in repeated jamming scenario for the state to rapidly go from 0 to 2 and backwards.<br />
Also, GNSS Jamming functionality is capable to separate indoor areas (e.g. underground parking) from events when jamming is actually happening. This is possible because in-band jamming will affect internal PGA (Programmable Gain Amplifier) degrade, as a result, CNR (Carrier-to-noise ratio) will degrade as well. On the other hand, if CNR degrade is degraded only because of underground or signal covered, internal PGA gain will keep almost the same.<br />
<br />
Note: GNSS Jamming is not available on 3.80, 3.82 GNSS modules. Available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver<br />
<br />
<br />
{{{dout_control_via_call_feature|==DOUT Control Via Call==<br />
<br />
[[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]]<br />
<br />
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/><br />
Call control functionality is the following:<br />
* When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF.<br />
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}.<br />
* {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}}<br />
<br />
{{{immobilizer_feature|==Immobilizer==<br />
<br />
[[Image:Immobilizer.gif|{{{general|size}}}|right]]<br />
<br />
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/><br />
<br/><br/><br />
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.<br />
<br />
<br />
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.<br />
<br />
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.<br />
<br/><br/><youtube>gjuiJjAejWU</youtube>}}}<br />
<br />
{{{ibutton_feature|==iButton Read Notification==<br />
[[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]]<br />
Output control parameter lets the user choose which DOUT will iButton blink. After connecting iButton, DOUT will blink for a period of time, which is configured in DOUT ON Duration parameter. The iButton List checking parameter configures whether the device reads the iButton ID from iButton list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in the iButton list.<br />
If Depend on Ignition parameter is enabled, then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled).<br />
Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):<br />
<br />
*If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.<br />
*If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.<br />
*If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.<br />
*If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.<br />
<br />
iButton Read Notification parameters:<br />
<br />
*Output control – available scenario settings for module Digital output activation/deactivation<br />
*DOUT ON duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active.<br />
*iButton List checking - parameter configures that device reads the iButton ID from list or not.<br />
*Depend on Ignition - Output will be triggered only if ignition is off<br />
<br/><br/>}}}<br />
<br />
{{{gnss_fuel|<br />
==GNSS Fuel Counter==<br />
<br />
[[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]]<br />
<br />
To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.<br />
<br />
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.<br />
<br />
''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.<br />
<br />
''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.<br />
}}}<br />
{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==<br />
<br />
[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]<br />
<br />
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/><br />
<br />
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/><br />
<br />
<table class="nd-othertables" style="width: 68%;"><br />
<tr><br />
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left;">DOUT Control via Ignition Scenario</td><br />
<td style="width: 8%; text-align:left">Enable/Disable DOUT Control Via Ignition scenario</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Control</td><br />
<td style="width: 8%; text-align:left">Scenario controls configured DOUT if ignition timeout exceeds its limit</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">DOUT Deactivation Via DIN</td><br />
<td style="width: 8%; text-align:left">DOUT is turned off if configured DIN is in on (voltage applied) state</td><br />
</tr><br />
<tr><br />
<td style="width: 8%; text-align:left">Ignition Off timeout</td><br />
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td><br />
</tr><br />
</table>}}}<br />
<br />
==Ignition ON Counter==<br />
[[File:Ignition on.gif|right]]<br />
'''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br><br />
It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours<br />
'''NOTE THAT''', when entering a starting value, the value must be in seconds!<br />
<br />
Example of Ignition On Counter '''I/O''' element:<br />
[[File:Ingintion On counter.gif|left]]<br />
<br></br><br />
{{{dout_type|<br />
==DOUT 1 Output Type==<br />
[[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br><br />
<br />
DOUT1 in '''Normal''' state:<br />
[[File:DoutNormal.jpg|thumb|left|500px]]<br />
<br></br><br></br><br></br><br></br></br><br />
<br />
DOUT1 in '''Inverted''' state:<br />
[[File:InvertedDout.png|thumb|left|500px]]<br />
<br></br><br></br><br></br><br />
<br />
<br />
<br />
<br />
*'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br><br />
<br />
[[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|03.27.07.Rev.00]] </b><br />
<br />
<br />
}}}<br />
{{{SECO|{{Template:Secure_vehicle_disabling}}}}}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB965_Sleep_modes&diff=77657Template:FMB965 Sleep modes2022-10-26T09:46:38Z<p>Deividas.Darulis: /* Power off sleep mode */</p>
<hr />
<div>{{{txt_sleepmodes|There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep, and Ultra Deep-sleep mode.}}}<br />
==Video Demonstration== <br />
Here is a visual demonstration of the sleep modes and how they they affect the device.<br />
<br /><br /><youtube>7UqbP_RTM0w</youtube><br /><br />
==GPS Sleep mode==<br />
<br />
<br />
{{{model|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.<br />
<br />
[[Image:FMB965_GPS_Sleep_.gif]]<br />
<br />
When in GPS sleep mode, {{{model|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:<br />
<br />
*{{{model|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;<br />
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:<br />
<br />
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;<br />
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;<br />
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.<br />
<br />
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};<br />
{{{txt_ignition|* Ignition (configured ignition source) is off;}}}<br />
<br />
*There are no SMS messages being received.<br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+<br />
|-<br />
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.<br />
|}<br />
{{{usb_disconnected|}}} <br />
<br />
{{{model|FMM6YX}}} exits GPS sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br />
==Deep Sleep mode==<br />
While in deep sleep mode, {{{model|FMM6YX}}} sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up the device via SMS). Despite records with the last known coordinate being saved and sent to the AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save the vehicle's battery.<br />
<br />
[[Image:FMB965_Deep_Sleep_.gif]]<br />
<br />
Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.<br />
{{{model|FMM6YX}}} can enter deep sleep mode if ALL of these conditions are met:<br />
<br />
*{{{model|FMM6YX}}} is configured in Deep Sleep mode and sleep timeout is reached;<br />
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:<br />
<br />
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;<br />
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;<br />
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.<br />
<br />
*Ignition (configured ignition source) is off;<br />
<br />
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};<br />
*''Min. Record Saving Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMM6YX}}} could close GPRS link;<br />
*The difference between ''Send Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMM6YX}}} could close GPRS link within at least 90 seconds;<br />
*There are no SMS messages being received;<br />
*Data socket(s) are closed;<br />
*Data sending is not in progress;<br />
*FOTA is not in progress.<br /><br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+<br />
|-<br />
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter Deep Sleep mode.<br />
|}<br />
{{{usb_disconnected|}}} <br />
<br />
{{{model|FMM6YX}}} exits deep sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br />
==Online Deep Sleep mode==<br />
<br />
In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.<br />
<br />
[[Image:FMB965_Online_Deep_Sleep_.gif]]<br />
<br />
Conditions to enter online deep sleep mode are the same as entering deep sleep mode.<br />
{{{model|FMM6YX}}} exits online sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br><br />
<br><br />
==Power off sleep mode==<br />
<br />
Power of sleep was added to {{{model|FMM6YX}}} devices. This is the lowest possible power consumption mode. <br />
In this mode, the device Allows to power off module to reduce power consumption to less than 1mA in a sleep mode.<br />
<br />
'''Note:''' During Power OFF Sleep mode there must be '''no''' active USB connected, otherwise it will interfere with the sleep state.<br />
<br />
[[Image:FMB965_Power_Off_Sleep_.gif]]<br />
<br />
When the '''Always make power on record''' is enabled, the the device will make a record and send when waking up from external interrupt.<br />
Device goes into power off state where module is powered off to save maximum amount of power and can only wake if there is movement by accelerometer, external power is applied, ignition (DIN1) is detected, or it is time to make the next periodic record.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB965_Sleep_modes&diff=77656Template:FMB965 Sleep modes2022-10-26T09:45:31Z<p>Deividas.Darulis: /* Power off sleep mode */</p>
<hr />
<div>{{{txt_sleepmodes|There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep, and Ultra Deep-sleep mode.}}}<br />
==Video Demonstration== <br />
Here is a visual demonstration of the sleep modes and how they they affect the device.<br />
<br /><br /><youtube>7UqbP_RTM0w</youtube><br /><br />
==GPS Sleep mode==<br />
<br />
<br />
{{{model|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.<br />
<br />
[[Image:FMB965_GPS_Sleep_.gif]]<br />
<br />
When in GPS sleep mode, {{{model|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:<br />
<br />
*{{{model|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;<br />
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:<br />
<br />
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;<br />
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;<br />
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.<br />
<br />
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};<br />
{{{txt_ignition|* Ignition (configured ignition source) is off;}}}<br />
<br />
*There are no SMS messages being received.<br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+<br />
|-<br />
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.<br />
|}<br />
{{{usb_disconnected|}}} <br />
<br />
{{{model|FMM6YX}}} exits GPS sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br />
==Deep Sleep mode==<br />
While in deep sleep mode, {{{model|FMM6YX}}} sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up the device via SMS). Despite records with the last known coordinate being saved and sent to the AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save the vehicle's battery.<br />
<br />
[[Image:FMB965_Deep_Sleep_.gif]]<br />
<br />
Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.<br />
{{{model|FMM6YX}}} can enter deep sleep mode if ALL of these conditions are met:<br />
<br />
*{{{model|FMM6YX}}} is configured in Deep Sleep mode and sleep timeout is reached;<br />
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:<br />
<br />
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;<br />
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;<br />
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.<br />
<br />
*Ignition (configured ignition source) is off;<br />
<br />
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};<br />
*''Min. Record Saving Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMM6YX}}} could close GPRS link;<br />
*The difference between ''Send Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMM6YX}}} could close GPRS link within at least 90 seconds;<br />
*There are no SMS messages being received;<br />
*Data socket(s) are closed;<br />
*Data sending is not in progress;<br />
*FOTA is not in progress.<br /><br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+<br />
|-<br />
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter Deep Sleep mode.<br />
|}<br />
{{{usb_disconnected|}}} <br />
<br />
{{{model|FMM6YX}}} exits deep sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br />
==Online Deep Sleep mode==<br />
<br />
In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.<br />
<br />
[[Image:FMB965_Online_Deep_Sleep_.gif]]<br />
<br />
Conditions to enter online deep sleep mode are the same as entering deep sleep mode.<br />
{{{model|FMM6YX}}} exits online sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br><br />
<br><br />
==Power off sleep mode==<br />
<br />
Power of sleep was added to {{{model|FMM6YX}}} devices. This is the lowest possible power consumption mode. <br />
In this mode, the device Allows to power off module to reduce power consumption to less than 1mA in a sleep mode.<br />
<br />
'''Note:''' During Power OFF Sleep mode there must be '''no''' active USB connected, otherwise it will interfere with the sleep mode.<br />
<br />
[[Image:FMB965_Power_Off_Sleep_.gif]]<br />
<br />
When the '''Always make power on record''' is enabled, the the device will make a record and send when waking up from external interrupt.<br />
Device goes into power off state where module is powered off to save maximum amount of power and can only wake if there is movement by accelerometer, external power is applied, ignition (DIN1) is detected, or it is time to make the next periodic record.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB965_Sleep_modes&diff=77655Template:FMB965 Sleep modes2022-10-26T09:43:47Z<p>Deividas.Darulis: /* Power off sleep mode */</p>
<hr />
<div>{{{txt_sleepmodes|There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep, and Ultra Deep-sleep mode.}}}<br />
==Video Demonstration== <br />
Here is a visual demonstration of the sleep modes and how they they affect the device.<br />
<br /><br /><youtube>7UqbP_RTM0w</youtube><br /><br />
==GPS Sleep mode==<br />
<br />
<br />
{{{model|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.<br />
<br />
[[Image:FMB965_GPS_Sleep_.gif]]<br />
<br />
When in GPS sleep mode, {{{model|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:<br />
<br />
*{{{model|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;<br />
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:<br />
<br />
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;<br />
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;<br />
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.<br />
<br />
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};<br />
{{{txt_ignition|* Ignition (configured ignition source) is off;}}}<br />
<br />
*There are no SMS messages being received.<br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+<br />
|-<br />
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.<br />
|}<br />
{{{usb_disconnected|}}} <br />
<br />
{{{model|FMM6YX}}} exits GPS sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br />
==Deep Sleep mode==<br />
While in deep sleep mode, {{{model|FMM6YX}}} sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up the device via SMS). Despite records with the last known coordinate being saved and sent to the AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save the vehicle's battery.<br />
<br />
[[Image:FMB965_Deep_Sleep_.gif]]<br />
<br />
Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.<br />
{{{model|FMM6YX}}} can enter deep sleep mode if ALL of these conditions are met:<br />
<br />
*{{{model|FMM6YX}}} is configured in Deep Sleep mode and sleep timeout is reached;<br />
*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:<br />
<br />
:*After Position Fix - {{{model|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;<br />
:*After Time Sync - {{{model|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;<br />
:*Always - {{{model|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.<br />
<br />
*Ignition (configured ignition source) is off;<br />
<br />
*Movement is not detected by the accelerometer{{{txt_movement| or configured movement source}}};<br />
*''Min. Record Saving Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) must be larger than ''Open Link Timeout'' parameter, so that {{{model|FMM6YX}}} could close GPRS link;<br />
*The difference between ''Send Period'' ({{{ctrDaq|[[{{{model|FMM6YX}}} Data acquisition settings|Data Acquisition Mode settings]]}}}) and ''Open Link Timeout'' must be more than 90 seconds, so that {{{model|FMM6YX}}} could close GPRS link within at least 90 seconds;<br />
*There are no SMS messages being received;<br />
*Data socket(s) are closed;<br />
*Data sending is not in progress;<br />
*FOTA is not in progress.<br /><br />
<br />
{| class="wikitable" style="border-style: solid; border-width: 0px"<br />
|+<br />
|-<br />
| style="text-align: left; background: #F6F6FB;" |[[Image:Bw_nb.png|50px]]<br />
| style="text-align: left; background: #F6F6FB;" |On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter Deep Sleep mode.<br />
|}<br />
{{{usb_disconnected|}}} <br />
<br />
{{{model|FMM6YX}}} exits deep sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br />
==Online Deep Sleep mode==<br />
<br />
In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.<br />
<br />
[[Image:FMB965_Online_Deep_Sleep_.gif]]<br />
<br />
Conditions to enter online deep sleep mode are the same as entering deep sleep mode.<br />
{{{model|FMM6YX}}} exits online sleep mode if {{{txt_exit|ONE of following conditions}}} is true:<br />
<br />
*Movement by accelerometer{{{txt_movement| or configured movement source}}} is detected;<br />
{{{txt_ignition|* Ignition (configured ignition source) is turned on.}}}<br />
<br><br />
<br><br />
==Power off sleep mode==<br />
<br />
Power of sleep was added to {{{model|FMM6YX}}} devices. This is the lowest possible power consumption mode. <br />
In this mode, the device Allows to power off module to reduce power consumption to less than 1mA in a sleep mode.<br />
Note: During Power OFF Sleep mode there must be no active USB connected, otherwise it will interfere with the sleep mode.<br />
<br />
[[Image:FMB965_Power_Off_Sleep_.gif]]<br />
<br />
When the '''Always make power on record''' is enabled, the the device will make a record and send when waking up from external interrupt.<br />
Device goes into power off state where module is powered off to save maximum amount of power and can only wake if there is movement by accelerometer, external power is applied, ignition (DIN1) is detected, or it is time to make the next periodic record.</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:Beacons_List&diff=69727Template:Beacons List2022-01-03T09:18:41Z<p>Deividas.Darulis: /* Configurable parameters in Beacons Capturing Configuration table (Advanced Mode) */</p>
<hr />
<div>==Beacon List Settings before FW ver. 3.27.07.Rev.00== <br />
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br><br />
===Beacon Settings===<br />
<br />
'''Beacon Detection'''<br><br />
* '''''Disabled''''' – Functionality disabled.<br><br />
* '''''All''''' – All visible beacons are detected. (Max. 100)<br><br />
* '''''Configured''''' – Only beacons from the list are sent to server<br><br />
<br />
'''Beacon Record'''<br><br />
* '''''Eventual''''' – Record is sent after scan procedure is completed. This parameter depends from the [[{{{model|FMB120}}} Bluetooth 4.0 settings|'''Bluetooth 4.0 Scan Settings'''.]]<br><br />
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br><br />
<br />
'''Record Period''' - Beacon record saving period:<br />
* Record Period on Move & Record Period on Stop. Timers for record generation when the device is moving and staying at the place.<br />
* Record Period on Move (Default value 60 seconds)<br><br />
* Record Period on Stop (Default value 60 seconds)<br><br><br />
<br />
[[File:Oldbeaconsets.gif|left]]<br><br><br><br><br><br><br><br><br><br><br />
<br />
While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.<br />
Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.<br />
<br />
===Beacon List===<br />
List of authorized beacons, Eddystone and iBeacon protocols are ''supported*.'' Example of the configured beacons detection in the List:<br><br />
<br />
[[File:BeaconCongif.mp4|1750px]]<br />
<br />
''*Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts<br />
can be omitted ex., Namespace:. UUID::, UUID::Minor, etc''<br />
<br />
The Beacons settings are configured as showed. The iBeacon or Eddystone is added to the list with the following structure:<br />
* '''''iBeacon''''' – 20 Bytes ('''UUDI''' (16-bytes : '''Major'''(2-bytes) : '''Minor''' (2-bytes))<br />
* '''''Eddystone''''' – 16 Bytes ('''Namespace''' (10-bytes) : '''Instance ID'''(6-bytes))<br />
<br />
There is a possibility to detect the devices just by UUID or Namespace (see the 2 and 6 elements in the list).<br />
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br/><br />
There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.<br />
<br />
==Beacon List Settings after FW ver. 3.27.07.Rev.00==<br />
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br />
===Beacon Settings===<br />
[[File:NewBeaconSettings.png]]<br />
<br />
'''Beacon Detection'''<br />
* '''''Disabled''''' – Beacon detection is disabled.<br />
* '''''All''''' – All visible beacons are detected (Max. 100).<br />
* '''''Configured''''' – device will only capture beacons by given data in Beacon list.<br />
<br />
'''Beacon Mode'''<br />
* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported) ('''AVL ID 385''').<br />
* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually ('''AVL ID 548''').<br />
<br />
'''Beacon Record'''<br />
* '''''On Change''''' – device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.<br />
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br />
<br />
'''Beacon Record Priority''' - Beacon record saving period:<br />
*'''''None''''' - No records will be generated <br />
*'''''Low''''' - Beacon record will be generated and sent once link with the server is established<br />
*'''''High''''' - Beacon record will be generated and sent immediately<br />
<br />
=== Advanced Beacon Capturing Configuration ===<br />
Prior to capturing specific Beacon data it is mandatory to have Beacons communication protocol - advertising packet structure. Without knowing packet structure - it is impossible to configure device properly to capture important data. <br />
<br />
Functionality allows to capture advertising packet of any kind of Beacon which broadcasts its information automatically. Beacon Capturing Configuration list also can be called as the set of rules to capture and transfer Beacon data. Advanced mode main purpose is to capture additional or only specific data (''by Manufacturers ID'') according to configured Offsets and Data sizes.<br />
<br />
==== Configurable parameters in Beacons Capturing Configuration table (Advanced Mode) ====<br />
[[File:BeaconMode.gif|right]]<br />
In advanced mode device can detect any Beacon type, the device can be configured to capture data from Universal beacons as seen in the configured in table (The fields in the Beacons Capturing Configuration will be empty), for example this configuration is set to detect iBeacon and EddyStone Beacons, also with additional data(in this case whole packet).<br />
[[File:Beaconsss.png|thumb|1154x1154px]]<br />
* '''Name''' - particular parameter does not affect Beacon capturing at all. You can name particular beacon capturing line as you wish. Note that if "dot" symbol is placed prior to the name - whole line in the table is disabled and beacons will not be captured;<br />
* '''Manufacturer ID''' - most crucial and important part of the configuration. Device will look for provided ID and capture beacons if ID matches. Manufacturer ID consists of 4 Bytes (8bits) and it is required to write in the table full ID of 4 Bytes. Of course, in some cases Manufacturer ID of some Beacons may be shorter - in such case shorter ID can be configured but do not forget to add zeroes after the ID inside configuration – otherwise configuration will not be valid. Actually any numbers could be written because ID size in found Beacon advertising packet can be configured with further parameters;<br />
'''Note:''' Manufacturer ID can be any set of bytes from the advertisement packet but selected bytes must never change in advertised packet.<br />
* '''Manufacturer ID Offset''' - when device finds advertising packet from a beacon, device will check for the Manufacturer ID in specific part of the packet. Particular parameter commands device from which byte in the advertised packet to look for the ID;<br />
* '''Manufacturer ID Size''' - maximum size is 4 Bytes (''same as maximum configurable parameter in Manufacturer ID''). This parameter indicates how many bytes in found advertising packet after offsetting to check. These bytes must match ID configured in Manufacturer ID section. If bytes match - Beacon advertisement packet is captured, if bytes do not match - packet is neglected;<br />
* '''Beacon ID Offset''' - parameter works the same way as Manufacturer ID Offset but main purpose is to capture e.g. UUID of the beacon because Manufacturer ID never changes on the same provider Beacons;<br />
* '''Beacon ID Size''' - parameter works the same way as Manufacturer ID Size but purpose is to capture specific part or whole e.g. UUID (major, minor);<br />
* '''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. battery voltage or status. These additional parameters depend on Beacon type and advertisement packet. In order to capture full packet of the Beacon - Offset can be left at 0 and Size matched by actual length of the advertised packet.<br />
* '''Beacon ID Source'''- Beacon ID source can be selected. When Beacon ID is used, source is used as configured in Beacon ID offset and Beacon ID size columns. When Beacon MAC address is selected, Beacon ID will be replaced with MAC address. IO structure remains the same, but Beacon ID size will always be reported as 0x06.<br />
<br />
==== EYE Sensor Capturing Configuration ====<br />
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found [[EYE SENSOR / BTSMP1|here]].<br />
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]<br />
[[File:Beacon temp marked.png|right|frameless|545x545px]]<br />
Information shown after setting the parameters. Red rectangle indicates configured EYE sensors. <br />
[[File:Eddystone temperature.png|left|frameless|552x552px|Eddystone temperature]]<br />
<br></br><br />
<br></br><br />
<br></br><br />
<br></br><br />
<br></br><br />
<br />
<br />
<br />
<br />
<br />
* '''Name''' - Eddystone and iBeacon were typed to name different sensors.<br />
*'''Manufacturer ID''' - is taken from protocol description, which can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]]. UUID and Type value is AAFE00 for Eddystone. CompanyID and Beacon Type are used for iBeacon which is 4C000215.<br />
*'''Manufacturer ID Offset''' - passes 9bytes in advertising packet to indicate when Manufacturer ID starts. 5bytes for iBeacon.<br />
*'''Manufacturer ID Size''' - number which indicates size of Manufacturer ID. 3bytes for Eddystone 4bytes for iBeacon.<br />
*'''Beacon ID Offset''' - number used to indicate when Beacon ID starts in advertising packet.<br />
*'''Beacon ID Size''' - number which indicates length of Beacon ID size, Instance ID is set in Eddystone and whole ID in iBeacon.<br />
*'''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. Temperature. <br />
*'''Beacon ID Source'''- configured ID output is shown in pictures. MAC address can be used as Source ID as well, in this case, It would be showed in ID section.<br />
<br />
'''Note''': Due to differencies in iBeacon and Eddystone advertising packets, number of Additional Data offset is different as well.<br />
<br />
===Beacon List===<br />
List of authorized beacons, Eddystone and iBeacon protocols are ''supported*.'' Example of the configured beacons detection in the List:<br><br />
[[File:BeaconCongif.mp4|1750px]]<br />
<br />
''*Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts''<br />
can be omitted ex., Namespace:. UUID::, UUID::Minor, etc<br />
<br />
The Beacons settings are configured as showed. The iBeacon or Eddystone is added to the list with the following structure:<br />
*'''''iBeacon''''' – 20 Bytes ('''UUDI''' (16-bytes : '''Major'''(2-bytes) : '''Minor''' (2-bytes))<br />
*'''''Eddystone''''' – 16 Bytes ('''Namespace''' (10-bytes) : '''Instance ID'''(6-bytes))<br />
<br />
There is a possibility to detect the devices just by UUID or Namespace (see the 2 and 6 elements in the list).<br />
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br /><br />
There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.<br />
<br />
From '''3.27.07.Rev.00''' Beacon list is expanded to support 50 beacons IDs.<br />
<br />
When Advanced Beacon mode is selected - Beacon list acquires new option too. No longer it is required to insert full UUID, major or minor. In advanced mode it is possible to mask / ignore specific parts of UUID or major, or minor. Symbol " * " is used for masking. This allows to write shorter or only partial UUIDs in the Beacon list. Note: it is not possible to use " * " symbol to mask Manufacturer ID in the Advanced list.<br />
<br />
===Beacon On Change/Periodic===<br />
[[File:BeaconRecords.png|right]]New functionality Beacon On Change has been implemented from '''03.27.07.Rev.00''' firmware version. The purpose of it is to create Beacon records only when there are changes in Beacon List. The parameter Beacon Record '''(Parameter ID: 136)''' has two possible settings: On Change (0) and Periodic (1). When On Change is selected, Beacon records are generated only when there are changes in the Beacon list. When Periodic is selected records will be saved according to configured period:<br />
[[File:Beanconperiod.png|frame|left]]<br><br><br><br><br />
<br />
<br />
<br />
==== Beacon On Change Scenarios: ====<br />
'''Example 1.'''<br />
<br />
''Non-Stop Scan'' is Disabled. Scan starts. Beacon is detected and added to the list. Scan ends and Beacon records are created. <br><br />
*The second scan starts. The same Beacon is still present. Scan ends and the Beacon record is not created because the list has not changed.<br />
*The third scan starts. The same Beacon is still present but disappeared during that scan. Scan ends and Beacon record is not created because it is still considered that this Beacon is valid thus Beacon List hasn’t updated.<br />
*The fourth scan starts. The same Beacon is not present from the start of the scan. Scan ends and Beacon is removed from Beacon list. Record is created since Beacon List has changed.<br />
<br />
'''Example 2.'''<br />
<br />
''Non-Stop Scan'' is Disabled. Scan starts. Beacon is detected and added to the list. Scan ends and Beacon records are created.<br />
*The second scan starts. The same Beacon is still present but is lost during that scan. Scan ends and the Beacon record is not created because the list has not changed.<br />
*The third scan starts. At the start of the scan, Beacon was not present but during that scanning period, it has been detected again. At the end of the scan, the Beacon record is not created since Beacon List has not changed.<br />
<br />
'''Example 3.'''<br />
<br />
''Non-Stop Scan'' is Enabled. Beacon Timeout is set to 10s. Beacon is detected and added to the list. Beacon record is created immediately after it is detected. The scan continues and during that time Beacon is lost. After 10s if Beacon has not been detected anymore Beacon record will be created. If that Beacon reappears after the set Beacon Timeout (in this case 10s) period has passed for that particular Beacon, a new Beacon record will be created. If That Beacon reappears before set Beacon Timeout (in this case 10s) period has passed. Beacon record will not be created.<br />
<br />
===Parsing Advanced Beacon data from record (AVL ID 548)===<br />
<br><br />
{| class="nd-othertables_2" style="width:100%;"<br />
|+<br />
! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Beacon data<br />
|-<br />
! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |Unparsed Beacon data<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |01<span style="background:#87CEEB">360001b10110f34b6f6aa38255aa9ef619154e2d0055021f0201060303aafe1716aafe0002f34b6f6aa38255a<br>a9ef619154e2d00550000</span><span style="background:#4ab92f">360001ab0110e987706aa38255aa94321b154e2d0055021f0201060303aafe1716aafe0<br>002e987706aa38255aa94321b154e2d00550000</span><span style="background:#e6e144">360001a801101e74706aa38255faabcd000000000000021f0201060303aafe1716<br>aafe00021e74706aa38255faabcd0000000000000000</span><span style="background:#fa623d">360001a201100c8c6f6ba38255aab7361a164e2d0055021f0201060303aafe171<br>6aafe00020c8c6f6ba38255aab7361a164e2d00550000</span><br />
|-<br />
|} <br />
<br><br />
'''Beacon Parameters'''<br />
<br />
The below table represents possible Beacon Parameters. <br />
{| class="nd-othertables_2" style="width:25%;"<br />
|+<br />
! colspan="2" style="width:10%; border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parameters<br />
|-<br />
! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |00<br />
| style="vertical-align: middle; text-align: center;" |RSSI <br />
|-<br />
! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |01<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID<br />
|-<br />
! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |02<br />
| style="vertical-align: middle; text-align: center;" |Additional beacon data<br />
|}<br />
{| class="nd-othertables_2" style="width:100%;"<br />
|+<br />
! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsed Beacon data<br />
|-<br />
! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |Parsed Beacon data part<br />
! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part<br />
|-<br />
| rowspan="50" style="vertical-align: middle; text-align: center;" |<br />
| style="vertical-align: middle; text-align: center;" |(Constant)<br />
| style="vertical-align: middle; text-align: center;" |01<br />
|-<br />
<br />
| style="vertical-align: middle; text-align: center;" |1st Beacon data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">36<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI (Parameter 00)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">00<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI value<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">B1<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID (Parameter 01)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">10<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">F34B6F6AA38255AA9EF619154E2D0055<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data (Parameter 02)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">02<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">1F<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#87CEEB">0201060303AAFE1716AAFE0002F34B6F6AA38255AA9EF619154E2D00550000<br />
|-<br />
<br />
| style="vertical-align: middle; text-align: center;" |2nd Beacon data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">36<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI (Parameter 00)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">00<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI value<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">AB<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID (Parameter 01)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">10<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">E987706AA38255AA94321B154E2D0055<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data (Parameter 02)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">02<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">1F<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#4ab92f">0201060303AAFE1716AAFE0002E987706AA38255AA94321B154E2D00550000<br />
|-<br />
<br />
| style="vertical-align: middle; text-align: center;" |3rd Beacon data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">36<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI (Parameter 00)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">00<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI value<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">A8<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID (Parameter 01)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">10<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">1E74706AA38255FAABCD000000000000<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data (Parameter 02)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">02<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">1F<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#e6e144">0201060303AAFE1716AAFE00021E74706AA38255FAABCD0000000000000000<br />
|-<br />
<br />
| style="vertical-align: middle; text-align: center;" |4th Beacon data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">36<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI (Parameter 00)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">00<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |RSSI value<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">A2<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID (Parameter 01)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">01<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">10<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Beacon ID<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">0C8C6F6BA38255AAB7361A164E2D0055<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data (Parameter 02)<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">02<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data length<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">1F<br />
|-<br />
| style="vertical-align: middle; text-align: center;" |Additional data<br />
| style="vertical-align: middle; text-align: center;" |<span style="background:#fa623d">0201060303AAFE1716AAFE00020C8C6F6BA38255AAB7361A164E2D00550000<br />
|-<br />
|}</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB6_Technical_features&diff=66775Template:FMB6 Technical features2021-08-30T12:59:37Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA rms<br/>Nominal: average {{{nominal|avg}}} rms<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average 35 mA<br/>Nominal: average 20 mA<br/>GNSS sleep: average 12,5 mA<br/>Deep Sleep: average 3,8 mA<br/>Online Deep Sleep: average 1,3 mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB6_Technical_features&diff=66772Template:FMB6 Technical features2021-08-30T12:58:06Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA rms<br/>Nominal: average {{{nominal|avg}}} rms<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average 35 mA<br/>Nominal: average 20 mA<br/>GNSS sleep: average 12,5 mA<br/>Deep Sleep: average 3,8 mA<br/>Online Deep Sleep: average 1,3 mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6_Dimensions.svg|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMB6_Technical_features&diff=66771Template:FMB6 Technical features2021-08-30T12:54:42Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA rms<br/>Nominal: average {{{nominal|avg}}} rms<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average 35 mA<br/>Nominal: average 20 mA<br/>GNSS sleep: average 12,5 mA<br/>Deep Sleep: average 3,8 mA<br/>Online Deep Sleep: average 1,3 mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6_Dimensions.svg|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMB640_General_description&diff=66770FMB640 General description2021-08-30T12:53:32Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMB General description|model=FMB640}}<br />
<br />
{{FMB640 Package contents}}<br />
<br />
==Basic characteristics==<br />
<br />
{{FMB640_Basic_characteristics}}<br />
<br />
<br />
{{FMB640 Hardware features}}<br />
<br />
<br />
{{FMB640 Interface features}}<br />
<br />
<br />
{{Template:FMB640 Special features}}<br />
<br />
<br />
{{Template:FMB1_Supply voltage 10 30}}<br />
<br />
{{Template:FMB6 Technical features|gprs=67|nominal=39|gnss_sleep=24|deep_sleep=7,5|onl_deep_sleep=2,4|battery=55|operating_min=-40|operating_max=+85|storage_min=-40|storage_max=+85|humidity_min=5|humidity_max=95|}}<br />
<br />
==Technical information about internal battery==<br />
<br />
{{Template:FMB640_Battery_information}}<br />
<br />
== Battery tests ==<br />
The amount of time the device will work from internal battery depends on the battery health, how often the device saves/sends information to the server, external peripherals connected to the device and the results may also differ depending on firmware used.<br />
<br />
For general comparison purpose, and to see what results can be achieved, you can refer to the following internal test results in different modes and sending frequencies:<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 100%;"><br />
<tr><br />
<th style="width: 10%; text-align:center; vertical-align:middle; color: black">Mode:</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Min Period (data saving frequency)</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Send Period (data sending frequency)</th><br />
<th style="width: 15%; text-align:center; vertical-align:middle; color: black">Starting Voltage</th><br />
<th style="width: 15%; text-align:center; vertical-align:middle; color: black">Cut off Voltage</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Time achieved</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating</td><br />
<td> 10 seconds</td><br />
<td> 60 seconds</td><br />
<td>10,1V</td><br />
<td>8,3V</td><br />
<td>471 min (7 hours 51 minutes)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating</td><br />
<td>60 seconds</td><br />
<td>60 seconds</td><br />
<td>10,2V</td><br />
<td>8,3V</td><br />
<td>546 min (9 hours 16 minutes)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Deep Sleep</td><br />
<td>12 hours</td><br />
<td>12 hours</td><br />
<td>10,0V</td><br />
<td>8,2V</td><br />
<td>15120 min (252 hours 0 minutes)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Online Deep Sleep</td><br />
<td>12 hours</td><br />
<td>12 hours</td><br />
<td>10,2V</td><br />
<td>8,6V</td><br />
<td>6480 min (108 hours 0 minutes)</td><br />
</tr><br />
</tr></table><br />
<br><br />
<br />
<br />
{{Template:FMB640_Electrical_characteristics}}<br />
[[Category:FMB640 Manual]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMM640_Technical_features&diff=66761Template:FMM640 Technical features2021-08-30T12:26:33Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA rms<br/>Nominal: average {{{nominal|avg}}} rms<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average 32 mA<br/>Nominal: average 22 mA<br/>GNSS sleep: average 16 mA<br/>Deep Sleep: average 2,6 mA<br/>Online Deep Sleep: average 6,7 mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMM640_Technical_features&diff=66759Template:FMM640 Technical features2021-08-30T12:25:42Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA rms<br/>Nominal: average {{{nominal|avg}}} rms<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average 35 mA<br/>Nominal: average 24 mA<br/>GNSS sleep: average 17 mA<br/>Deep Sleep: average 2,9 mA<br/>Online Deep Sleep: average 7 mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMC6_Technical_features&diff=66758Template:FMC6 Technical features2021-08-30T12:22:39Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average 35 mA<br/>Nominal: average 24 mA<br/>GNSS sleep: average 17 mA<br/>Deep Sleep: average 2,9 mA<br/>Online Deep Sleep: average 7 mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMC6_Technical_features&diff=66757Template:FMC6 Technical features2021-08-30T12:15:10Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 24 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMC6_Technical_features&diff=66756Template:FMC6 Technical features2021-08-30T12:14:21Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMC6_Technical_features&diff=66755Template:FMC6 Technical features2021-08-30T12:13:37Z<p>Deividas.Darulis: Undo revision 66754 by Deividas.Darulis (talk)</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=Template:FMC6_Technical_features&diff=66754Template:FMC6 Technical features2021-08-30T12:12:47Z<p>Deividas.Darulis: /* Technical features */</p>
<hr />
<div>==Technical features==<br />
<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 40%;"><br />
<tr><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Part name</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Physical specification</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Navigation indication</td><br />
<td>LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Modem indication</td><br />
<td style="vertical-align:middle">LED</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Socket</td><br />
<td style="vertical-align:middle">Soldered inner socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">USB</td><br />
<td>Mini USB socket</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GNSS</td><br />
<td style="vertical-align:middle">External GNSS antenna</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">GSM</td><br />
<td>External GSM antenna</td><br />
</tr><br />
</table><br />
<br><br />
<br />
<table class="nd-othertables" style="width: 70%;"><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
<th colspan="2" style="width: 70%; text-align:center; vertical-align:middle; color: black">Technical details</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle; width: 40%">2 W max.<br/>Current consumption at 12 V</td><br />
<td style="vertical-align:middle; width: 30%">GPRS: average {{{gprs|avg}}} mA<br/>Nominal: average {{{nominal|avg}}} mA<br/>GNSS sleep: average {{{gnss_sleep|avg}}} mA<br/>Deep Sleep: average {{{deep_sleep|avg}}} mA<br/>Online Deep Sleep: average {{{onl_deep_sleep|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Battery charge current</td><br />
<td style="vertical-align:middle">Average {{{battery|avg}}} mA</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating temperature (without battery)</td><br />
<td style="vertical-align:middle">{{{operating_min|error}}}..{{{operating_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage temperature (without battery)</td><br />
<td>{{{storage_min|error}}}..{{{storage_max|error}}}</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Storage relative humidity</td><br />
<td>{{{humidity_min|error}}}..{{{humidity_max|error}}}% (no condensation)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Device + case + battery weight</td><br />
<td>200 g</td><br />
</tr><br />
</table><br />
<br><br />
Dimension drawing:<br />
[[Image:FMX6 dimensions.png|600px|none]]</div>Deividas.Darulishttps://wiki.teltonika-gps.com/index.php?title=FMM640_General_description&diff=66239FMM640 General description2021-07-29T15:03:42Z<p>Deividas.Darulis: </p>
<hr />
<div>{{Template:FMM64 General description|model=FMM640}}<br />
<br />
{{FMM640 Package contents}}<br />
<br />
==Basic characteristics==<br />
<br />
{{FMM640_Basic_characteristics}}<br />
<br />
<br />
GSM/GPRS/4G LTE CAT.M1 features:<br />
<br />
*FDD-LTE:<br />
**B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/B19/ B20/ B26/ B28<br />
*TDD-LTE:<br />
**B39 (for Cat.M1 only)<br />
*GSM/GPRS bands:<br />
**850/900/1800/1900MHz<br />
**GPRS and EDGE class 12<br />
**SMS (text, data)<br />
<!--<br />
Blue-tooth:<br />
<br />
*Blue-tooth specification V5.0<br />
*Blue-tooth transceiver fully compliant with Blue-tooth specification V5.0 for external peripherals:<br />
*Voice calls over Blue-tooth<br />
--><br />
<br />
GNSS features:<br />
<br />
*Tracking: 33/ 99 acquisition channels<br />
*-165 dBM sensitivity<br />
*Hot start <1s<br />
*Warm Start < 25s<br />
*Cold start < 35s<br />
*NMEA-183 protocol<br />
*GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS<br />
*Accuracy < 3m<br />
<br />
Hardware features:<br />
<br />
*STM32 processor;<br />
*2 MB internal Flash memory;<br />
*External memory card slot;<br />
*Built-in accelerometer;<br />
*Built-in Blue-tooth 5.0;<br />
*Internal backup battery included;<br />
<br />
Interface:<br />
<br />
*Integrated KLINE<br />
*Dual CAN J1939<br />
*J1708 CAN<br />
*RS485 and 2x RS232 support<br />
*4 Digital Inputs for object status monitoring<br />
*4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)<br />
*4 Analog Inputs<br />
*1-wire interface<br />
*Ni-Mh 550 mAh internal battery<br />
*MicroSD card<br />
*2 status LED<br />
*Dimensions: L(104,1mm)xW(76,8mm)xH(31,5mm)<br />
*Configuration and firmware update (via FOTA and USB cable)<br />
*External GSM antenna for higher sensitivity<br />
*External GNSS antenna for higher sensitivity<br />
<br />
Special features:<br />
<br />
*Fast position fix;<br />
*High Quality track even in high density urban canyon;<br />
*Ultra small case;<br />
*Ready for harsh environment;<br />
*Easy to mount in limited access areas;<br />
*Firmly fasten;<br />
*2 LED status indication;<br />
*Real time tracking;<br />
*Smart data acquisition based on:<br />
** Time;<br />
** Speed;<br />
** Angle;<br />
** Distance;<br />
** Ignition or any other I/O event;<br />
*Sending acquired data via GPRS;<br />
*GPRS and SMS I/O events;<br />
*Virtual odometer;<br />
*Jamming detection;<br />
*Configurable using Secured SMS Commands;<br />
*1x micro SIM card; 1x eSIM;<br />
*Overvoltage protection;<br />
<br />
<br />
{{Template:FMM1_Supply voltage 10 30}}<br />
<br />
{{Template:FMM640 Technical features|gprs=60|nominal=40|gnss_sleep=31|deep_sleep=4|onl_deep_sleep=13|battery=55|operating_min=-40|operating_max=+85|storage_min=-40|storage_max=+85|humidity_min=5|humidity_max=95|}}<br />
<br />
==Technical information about internal battery==<br />
<br />
{{Template:FMB640_Battery_information}}<br />
<br />
== Battery tests ==<br />
The amount of time the device will work from internal battery depends on the battery health, how often the device saves/sends information to the server, external peripherals connected to the device and the results may also differ depending on firmware used.<br />
<br />
For general comparison purpose, and to see what results can be achieved, you can refer to the following internal test results in different modes and sending frequencies:<br />
<br><br />
<br />
<table class="nd-othertables" style="width: 100%;"><br />
<tr><br />
<th style="width: 10%; text-align:center; vertical-align:middle; color: black">Mode:</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Min Period (data saving frequency)</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Send Period (data sending frequency)</th><br />
<th style="width: 15%; text-align:center; vertical-align:middle; color: black">Starting Voltage</th><br />
<th style="width: 15%; text-align:center; vertical-align:middle; color: black">Cut off Voltage</th><br />
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Time achieved</th><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating</td><br />
<td> 10 seconds</td><br />
<td> 60 seconds</td><br />
<td>10,1V</td><br />
<td>7,6V</td><br />
<td>438 min (7 hours 18 minutes)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Operating</td><br />
<td>60 seconds</td><br />
<td>60 seconds</td><br />
<td>10,5V</td><br />
<td>7,6V</td><br />
<td>506 min (8 hours 26 minutes)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Deep Sleep</td><br />
<td>12 hours</td><br />
<td>12 hours</td><br />
<td>10,2V</td><br />
<td>8,2V</td><br />
<td>5040 min (84 hours 0 minutes)</td><br />
</tr><br />
<tr><br />
<td style="vertical-align:middle">Online Deep Sleep</td><br />
<td>12 hours</td><br />
<td>12 hours</td><br />
<td>10,1V</td><br />
<td>8,0V</td><br />
<td>2160 min (36 hours 0 minutes)</td><br />
</tr><br />
</tr></table><br />
<br><br />
{{Template:FMB640_Electrical_characteristics}}<br />
[[Category:FMM640 Manual]]</div>Deividas.Darulis