Teltonika Telematics Wiki - User contributions [en]

DSM Firmware errata

2026-01-08T07:31:58Z

Edgar.dementenko: /* Firmware for FMC650 */

__TOC__

===DSM Firmware Version===

We are always improving our device's performance, stability, and reliability. 
This document describes '''DSM platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
4gyd2i1HYC4XqBni7T7robKdUGuIYmRjXubVE7pS8yIAAAD0ABfJUm+SNLBCpdvuD+UoHMztegOBnLICjSh7oDYzFOWnuURqrhZHQBGisnU4mMf6cjVlB9YxvD/mwL4qOPdN85fuCsstsJ7kxXcRYxiAa5hD7w13ydfW+RjR+0BTHEr1yt5KKrw2yZvOhewONNonvcH3vHHDeCDihme+fkwSS02gbT0hri4uoIOoOmkrdWvbshD/wXeFEDDCCzGPhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMx6 device series==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.01.Rev.06''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-10-28}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''FIX:''' DSM repeated photo sending
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.01.Rev.02''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added '''sdformat''' command support for DSM camera
|-
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DSM support for FMC650.
* '''NEW:''' Two camera support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.158''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-10-09}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Event timeout settings support via CFG

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.157''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DSM protocol update to 1.4 version
* Prevent modifying files after DSM Ready state is set
* IF file corrupted, DSM will return to ready state

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.156''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-05-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Increased event sound max value for voice setting
* Snapshot retransmit capability is added (periodic and by request)
* Prevent premature dsm state change from uploading to ready
* Reject unsolicited snapshot if upload buffer is full
* Multiple accsess to SD prevention
* Yawning sensitivity fixed value
* Increased UART buffer sizes
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.155''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial firmware release
* Added DSM support
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DSM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.8.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2026-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Fixed repeated photo sending

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.8.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-09-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed wrong value coordinates

|-

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.7.1.T9 1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-08}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* SD format command

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.6.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Added the feature to make the snapshot of yawn on/off via FM
* Warning sounds fix

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.4.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Distraction Bus/Truck feature added
* Language error fixed(Spanish): Seat belt warning sound changed from English to Spanish
* Added features:
* Calibration timeout function
* Event processing starting from the second yawn event
* Added new snapshot and driver absence warning options

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-12-04}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Seat belt detection update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0.TR1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-08-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* New calibration page 30.0.0.1:18087
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issues related to SD retransmission function
* Fixed Timestamp values in UTC
* Fixed GPS coordinates changed to signed int
* Fixed Snapshot retransmission packet size
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-07}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
*stable DSM work
|-
|}

[[Category: DSM]]

DualCam Product Change Notifications

2025-11-24T11:22:43Z

Edgar.dementenko: /* 2025.11.24: DualCam complectation changes */

'''Product change notifications (PCN)''' is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. '''This page stores information regarding changes to the DualCam video/photo recording device and FMX125/FMX225 tracking device since they are closely developed to work with each other.''' Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

==2025.11.24: DualCam complectation changes ==
We would like to inform you about a change in the DualCam complectation. After we sell the remaining stock that includes a 128 GB SD card, all new DualCam orders will come with a 64 GB SD card.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with 128 Gb complectation
| style="text-align: left; background: white;" |New version: New complectation of DualCam inlclude 64 Gb SD card.
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according to the market situation.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2026
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCADG3Y01 and DUALCAMSAMP1
| style="text-align: left; background: white;" |DualCam complectation changes. New order codes DUALCASAMPLE and DUALCADF4Y01
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients can still order DualCam units with a 128 GB SD card, as long as we have them in stock. After the stock is depleted, all new DualCam orders that require an SD card will include only a 64 GB SD card.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2023.01.20: Dualcam HW changes ==
We would like to inform you about the HW change for Dualcam hardware. The old DualCam voltage converter (white box) has been integrated into the camera hardware.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with the voltage converter (in the white box) [[File:White box.JPG|286x286px]]
| style="text-align: left; background: white;" |New version: New DualCam without a voltage converter (white box) it has been integrated into the camera hardware.
[[File:New design.jpg|271x271px]]
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according of client feedback that sometimes the voltage converter (white box) is hard to hide in the car during installation, so we integrated the voltage converter into DualCam hardware.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2023-01-20
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** all order codes
| style="text-align: left; background: white;" |DualCam Hardware Change
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients might receive DualCam with the previous hardware version that has a voltage converter (white box).
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2022.11.29: FMX125 Base firmware update for MEIG support==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.13.Rev.367.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.365
| style="text-align: left; background: white;" |New version: FMX125 03.27.13.Rev.367
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 November
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.05.20: DualCam watch dog implementation update==
We would like to inform you about the base firmware update for DualCam starting from 20th of May 2022. New production firmware version will be V2.2.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V2.2.2
| style="text-align: left; background: white;" |New version: DualCam V2.2.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 May
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.03.17: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.07.Rev.365.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.361
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.365
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.01.06: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 6th of January 2022. New production firmware version will be V2.2.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.3
| style="text-align: left; background: white;" |New version: DualCam V2.2.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 January
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.09.17: FMX125 Minor update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of September 2021. New tracking device production firmware version will be 03.27.07.Rev.361.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.360
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.361
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 September
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.08.30: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 30th of August 2021. New tracking device production firmware version will be 03.27.07.Rev.360.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.03.Rev.104
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.360
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 August
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.07.15: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 15th of July 2021. New production firmware version will be V1.9.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.2
| style="text-align: left; background: white;" |New version: DualCam V1.9.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 July
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.18: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 18th of June 2021. New tracking device production firmware version will be 03.27.03.Rev.104.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.00.Rev.100
| style="text-align: left; background: white;" |New version: FMX125 03.27.03.Rev.104
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.02: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 2nd of June 2021. New production firmware version will be V1.9.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.0
| style="text-align: left; background: white;" |New version: DualCam V1.9.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: FMX125 Initial firmware release==
We would like to inform you about the new base firmware release for FMX125 starting from 19th of February 2021. New tracking device production firmware version will be 03.27.00.Rev.100.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: FMX125 03.27.00.Rev.100
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |New firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: DualCam firmware initial release==
We would like to inform you about the base firmware update for DualCam starting from 19th of February 2021. New production firmware version will be V1.9.0.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: DualCam V1.9.0
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Initial firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}
[[Category:Teltonika DualCam]]

DualCam Product Change Notifications

2025-11-24T11:22:20Z

Edgar.dementenko: /* 2025.11.24: DualCam complectation changes */

'''Product change notifications (PCN)''' is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. '''This page stores information regarding changes to the DualCam video/photo recording device and FMX125/FMX225 tracking device since they are closely developed to work with each other.''' Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

==2025.11.24: DualCam complectation changes ==
We would like to inform you about a change in the DualCam complectation. After we sell the remaining stock that includes a 128 GB SD card, all new DualCam orders will come with a 64 GB SD card.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with 128 Gb complectation
| style="text-align: left; background: white;" |New version: New complectation of DualCam inlclude 64 Gb SD card.
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according to the market situation.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2026-01-02
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCADG3Y01 and DUALCAMSAMP1
| style="text-align: left; background: white;" |DualCam complectation changes. New order codes DUALCASAMPLE and DUALCADF4Y01
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients can still order DualCam units with a 128 GB SD card, as long as we have them in stock. After the stock is depleted, all new DualCam orders that require an SD card will include only a 64 GB SD card.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2023.01.20: Dualcam HW changes ==
We would like to inform you about the HW change for Dualcam hardware. The old DualCam voltage converter (white box) has been integrated into the camera hardware.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with the voltage converter (in the white box) [[File:White box.JPG|286x286px]]
| style="text-align: left; background: white;" |New version: New DualCam without a voltage converter (white box) it has been integrated into the camera hardware.
[[File:New design.jpg|271x271px]]
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according of client feedback that sometimes the voltage converter (white box) is hard to hide in the car during installation, so we integrated the voltage converter into DualCam hardware.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2023-01-20
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** all order codes
| style="text-align: left; background: white;" |DualCam Hardware Change
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients might receive DualCam with the previous hardware version that has a voltage converter (white box).
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2022.11.29: FMX125 Base firmware update for MEIG support==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.13.Rev.367.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.365
| style="text-align: left; background: white;" |New version: FMX125 03.27.13.Rev.367
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 November
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.05.20: DualCam watch dog implementation update==
We would like to inform you about the base firmware update for DualCam starting from 20th of May 2022. New production firmware version will be V2.2.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V2.2.2
| style="text-align: left; background: white;" |New version: DualCam V2.2.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 May
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.03.17: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.07.Rev.365.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.361
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.365
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.01.06: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 6th of January 2022. New production firmware version will be V2.2.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.3
| style="text-align: left; background: white;" |New version: DualCam V2.2.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 January
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.09.17: FMX125 Minor update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of September 2021. New tracking device production firmware version will be 03.27.07.Rev.361.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.360
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.361
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 September
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.08.30: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 30th of August 2021. New tracking device production firmware version will be 03.27.07.Rev.360.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.03.Rev.104
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.360
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 August
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.07.15: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 15th of July 2021. New production firmware version will be V1.9.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.2
| style="text-align: left; background: white;" |New version: DualCam V1.9.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 July
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.18: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 18th of June 2021. New tracking device production firmware version will be 03.27.03.Rev.104.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.00.Rev.100
| style="text-align: left; background: white;" |New version: FMX125 03.27.03.Rev.104
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.02: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 2nd of June 2021. New production firmware version will be V1.9.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.0
| style="text-align: left; background: white;" |New version: DualCam V1.9.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: FMX125 Initial firmware release==
We would like to inform you about the new base firmware release for FMX125 starting from 19th of February 2021. New tracking device production firmware version will be 03.27.00.Rev.100.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: FMX125 03.27.00.Rev.100
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |New firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: DualCam firmware initial release==
We would like to inform you about the base firmware update for DualCam starting from 19th of February 2021. New production firmware version will be V1.9.0.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: DualCam V1.9.0
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Initial firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}
[[Category:Teltonika DualCam]]

DualCam Product Change Notifications

2025-11-24T11:20:03Z

Edgar.dementenko: /* 2025.11.24: DualCam complectation changes */

'''Product change notifications (PCN)''' is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. '''This page stores information regarding changes to the DualCam video/photo recording device and FMX125/FMX225 tracking device since they are closely developed to work with each other.''' Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

==2025.11.24: DualCam complectation changes ==
We would like to inform you about a change in the DualCam complectation. From now on, it will only include a 64 GB SD card.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with 128 Gb complectation
| style="text-align: left; background: white;" |New version: New complectation of DualCam inlclude 64 Gb SD card.
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according to the market situation.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2026-01-02
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCADG3Y01 and DUALCAMSAMP1
| style="text-align: left; background: white;" |DualCam complectation changes new order codes DUALCASAMPLE and DUALCADF4Y01
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients can still order DualCam units with a 128 GB SD card, as long as we have them in stock. After the stock is depleted, all new DualCam orders that require an SD card will include only a 64 GB SD card.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2023.01.20: Dualcam HW changes ==
We would like to inform you about the HW change for Dualcam hardware. The old DualCam voltage converter (white box) has been integrated into the camera hardware.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with the voltage converter (in the white box) [[File:White box.JPG|286x286px]]
| style="text-align: left; background: white;" |New version: New DualCam without a voltage converter (white box) it has been integrated into the camera hardware.
[[File:New design.jpg|271x271px]]
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according of client feedback that sometimes the voltage converter (white box) is hard to hide in the car during installation, so we integrated the voltage converter into DualCam hardware.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2023-01-20
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** all order codes
| style="text-align: left; background: white;" |DualCam Hardware Change
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients might receive DualCam with the previous hardware version that has a voltage converter (white box).
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2022.11.29: FMX125 Base firmware update for MEIG support==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.13.Rev.367.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.365
| style="text-align: left; background: white;" |New version: FMX125 03.27.13.Rev.367
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 November
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.05.20: DualCam watch dog implementation update==
We would like to inform you about the base firmware update for DualCam starting from 20th of May 2022. New production firmware version will be V2.2.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V2.2.2
| style="text-align: left; background: white;" |New version: DualCam V2.2.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 May
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.03.17: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.07.Rev.365.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.361
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.365
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.01.06: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 6th of January 2022. New production firmware version will be V2.2.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.3
| style="text-align: left; background: white;" |New version: DualCam V2.2.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 January
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.09.17: FMX125 Minor update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of September 2021. New tracking device production firmware version will be 03.27.07.Rev.361.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.360
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.361
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 September
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.08.30: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 30th of August 2021. New tracking device production firmware version will be 03.27.07.Rev.360.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.03.Rev.104
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.360
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 August
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.07.15: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 15th of July 2021. New production firmware version will be V1.9.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.2
| style="text-align: left; background: white;" |New version: DualCam V1.9.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 July
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.18: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 18th of June 2021. New tracking device production firmware version will be 03.27.03.Rev.104.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.00.Rev.100
| style="text-align: left; background: white;" |New version: FMX125 03.27.03.Rev.104
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.02: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 2nd of June 2021. New production firmware version will be V1.9.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.0
| style="text-align: left; background: white;" |New version: DualCam V1.9.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: FMX125 Initial firmware release==
We would like to inform you about the new base firmware release for FMX125 starting from 19th of February 2021. New tracking device production firmware version will be 03.27.00.Rev.100.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: FMX125 03.27.00.Rev.100
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |New firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: DualCam firmware initial release==
We would like to inform you about the base firmware update for DualCam starting from 19th of February 2021. New production firmware version will be V1.9.0.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: DualCam V1.9.0
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Initial firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}
[[Category:Teltonika DualCam]]

DualCam Product Change Notifications

2025-11-24T11:11:42Z

Edgar.dementenko:

'''Product change notifications (PCN)''' is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. '''This page stores information regarding changes to the DualCam video/photo recording device and FMX125/FMX225 tracking device since they are closely developed to work with each other.''' Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

==2025.11.24: DualCam complectation changes ==
We would like to inform you about a change in the DualCam complectation. From now on, it will only include a 64 GB SD card.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with 128 Gb complectation
| style="text-align: left; background: white;" |New version: New complectation of DualCam inlclude 64 Gb SD card.
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according to the market situation.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2026-01-02
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCADG3Y01 and DUALCAMSAMP1
| style="text-align: left; background: white;" |DualCam complectation changes
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients can still order DualCam units with a 128 GB SD card, as long as we have them in stock. After the stock is depleted, all new DualCam orders that require an SD card will include only a 64 GB SD card.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}
==2023.01.20: Dualcam HW changes ==
We would like to inform you about the HW change for Dualcam hardware. The old DualCam voltage converter (white box) has been integrated into the camera hardware.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |DualCam Hardware Change
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |
|-
| style="text-align: left; background: white;" |Old version:
Dualcam with the voltage converter (in the white box) [[File:White box.JPG|286x286px]]
| style="text-align: left; background: white;" |New version: New DualCam without a voltage converter (white box) it has been integrated into the camera hardware.
[[File:New design.jpg|271x271px]]
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |The change was made according of client feedback that sometimes the voltage converter (white box) is hard to hide in the car during installation, so we integrated the voltage converter into DualCam hardware.
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2023-01-20
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** all order codes
| style="text-align: left; background: white;" |DualCam Hardware Change
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |During the transition period, clients might receive DualCam with the previous hardware version that has a voltage converter (white box).
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | DualCam is still the same so not need any additional movement to make.
|-
|}

==2022.11.29: FMX125 Base firmware update for MEIG support==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.13.Rev.367.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.365
| style="text-align: left; background: white;" |New version: FMX125 03.27.13.Rev.367
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 November
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.05.20: DualCam watch dog implementation update==
We would like to inform you about the base firmware update for DualCam starting from 20th of May 2022. New production firmware version will be V2.2.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V2.2.2
| style="text-align: left; background: white;" |New version: DualCam V2.2.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 May
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.03.17: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of June 2022. New tracking device production firmware version will be 03.27.07.Rev.365.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.361
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.365
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2022.01.06: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 6th of January 2022. New production firmware version will be V2.2.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.3
| style="text-align: left; background: white;" |New version: DualCam V2.2.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2022 January
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.09.17: FMX125 Minor update==
We would like to inform you about the base firmware update for FMX125 starting from 17th of September 2021. New tracking device production firmware version will be 03.27.07.Rev.361.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.07.Rev.360
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.361
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 September
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.08.30: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 30th of August 2021. New tracking device production firmware version will be 03.27.07.Rev.360.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.03.Rev.104
| style="text-align: left; background: white;" |New version: FMX125 03.27.07.Rev.360
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 August
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.07.15: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 15th of July 2021. New production firmware version will be V1.9.3.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.2
| style="text-align: left; background: white;" |New version: DualCam V1.9.3
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 July
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.18: FMX125 Base firmware update==
We would like to inform you about the base firmware update for FMX125 starting from 18th of June 2021. New tracking device production firmware version will be 03.27.03.Rev.104.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: FMX125 03.27.00.Rev.100
| style="text-align: left; background: white;" |New version: FMX125 03.27.03.Rev.104
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.06.02: DualCam base update==
We would like to inform you about the base firmware update for DualCam starting from 2nd of June 2021. New production firmware version will be V1.9.2.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: DualCam V1.9.0
| style="text-align: left; background: white;" |New version: DualCam V1.9.2
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 June
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Update firmware
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: FMX125 Initial firmware release==
We would like to inform you about the new base firmware release for FMX125 starting from 19th of February 2021. New tracking device production firmware version will be 03.27.00.Rev.100.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: FMX125 03.27.00.Rev.100
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |FMX125 base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |FMX125
| style="text-align: left; background: white;" |FMX125******** order codes with base Firmware
| style="text-align: left; background: white;" |New firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}

==2021.02.19: DualCam firmware initial release==
We would like to inform you about the base firmware update for DualCam starting from 19th of February 2021. New production firmware version will be V1.9.0.
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| colspan="2" style="text-align: left; background: white;" |Firmware update
|-
| rowspan="2" style="width: 221px; text-align: left; background: white;" |Detailed description
| colspan="2" style="width: 908px; text-align: left; background: white;" |Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/DualCam_Firmware_errata
|-
| style="text-align: left; background: white;" |Old version: N/A
| style="text-align: left; background: white;" |New version: DualCam V1.9.0
|-
| style="text-align: left; background: white;" |Change reasons
| colspan="2" style="text-align: left; background: white;" |DualCam base firmware version update
|-
| style="text-align: left; background: white;" | Product release date
| colspan="2" style="text-align: left; background: white;" |2021 February
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Affected products
|-
| style="width: 221px; text-align: left; background: white;" |Model
| style="width: 448px; text-align: left; background: white;" |Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" |DualCam
| style="text-align: left; background: white;" |DUALCAM***** order codes with base Firmware
| style="text-align: left; background: white;" |Initial firmware release
|-
|}

{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
|-
| style="text-align: left; background: white;" |Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" | If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|-
|}
[[Category:Teltonika DualCam]]

Teltonika DualCam

2025-11-18T08:14:18Z

Edgar.dementenko:

'''Teltonika DualCam''' solution is perfect for capturing videos or pictures of the events that might occur on the road, e.g. crash. Mounted on the vehicle front window, two cameras are used, front and rear, to record videos before and after the events, take photos periodically or by request and send all data to the server.

'''Also the possibility to connect two cameras, DSM and DashCam or DualCam, to one device, FMC650'''. By utilizing the two RS232 ports on the FMC650, you can connect the DSM camera for driver status monitoring to one port and the DualCam or DashCam camera for road and cargo monitoring to the second port. '''[https://wiki.teltonika-gps.com/view/DualCam_Configuration#Connecting_two_cameras_simultaneously_for_FMx650 Configuration]'''

DualCam is connected to '''FMC125, FMC225 , and FMC650''' devices using the RS232 interface.

[[File:471085 DualCam-2022-02-08 (1).png|alt=|right|500x500px]]

*[[First Start]]
*[[Camera Manual]]
*[[DualCam Configuration]]
*[[Data image/video review]]
*[[DualCam Communication Protocol]]
*[[DualCam Data Sending Parameters ID]]
*[[DualCam SMS commands]]
*[[DualCam Certifications & Approvals]]
*[[DualCam Troubleshoot]]
*[[DualCam Firmware errata]]
*[[DualCam Product Change Notifications]]
*[[DualCam FAQ]]
*[[DualCam Integration on platforms]]
*[[DualCam Nomenclature, classification codes]]
*[[DualCam EAN]]
*[[Dualcam Testing|DualCam Testing guide]]
*[[CloudView Platform]]
==Downloads==
'''Manual & Documentation''' 

[[File:pdf_icon.png|32px|link=]]
[[Media:Teltonika DualCam datasheet v1.3 1.pdf|DualCam Datasheet (EN)]]
(Updated on: 2025-11-15)

==Additional information==

https://teltonika-gps.com/lt/product/dualcam/

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

==Video presentation about DualCam==

<youtube>https://www.youtube.com/watch?v=1ccD4Yo1zFA&ab_channel=TeltonikaTelematics</youtube> 

[[Category:Video Solutions]]

Teltonika DualCam

2025-11-18T08:13:59Z

Edgar.dementenko:

'''Teltonika DualCam''' solution is perfect for capturing videos or pictures of the events that might occur on the road, e.g. crash. Mounted on the vehicle front window, two cameras are used, front and rear, to record videos before and after the events, take photos periodically or by request and send all data to the server.

'''Also the possibility to connect two cameras, DSM and DashCam or DualCam, to one device, FMC650'''. By utilizing the two RS232 ports on the FMC650, you can connect the DSM camera for driver status monitoring to one port and the DualCam or DashCam camera for road and cargo monitoring to the second port. '''[https://wiki.teltonika-gps.com/view/DualCam_Configuration#Connecting_two_cameras_simultaneously_for_FMx650 Configuration]'''

DualCam is connected to '''FMC125, FMC225 , and FMC650''' devices using the RS232 interface.

[[File:471085 DualCam-2022-02-08 (1).png|alt=|right|500x500px]]

*[[First Start]]
*[[Camera Manual]]
*[[DualCam Configuration]]
*[[Data image/video review]]
*[[DualCam Communication Protocol]]
*[[DualCam Data Sending Parameters ID]]
*[[DualCam SMS commands]]
*[[DualCam Certifications & Approvals]]
*[[DualCam Troubleshoot]]
*[[DualCam Firmware errata]]
*[[DualCam Product Change Notifications]]
*[[DualCam FAQ]]
*[[DualCam Integration on platforms]]
*[[DualCam Nomenclature, classification codes]]
*[[DualCam EAN]]
*[[Dualcam Testing|DualCam Testing guide]]
*[[CloudView Platform]]
==Downloads==
'''Manual & Documentation''' 

[[File:pdf_icon.png|32px|link=]]
[[Media:Teltonika DualCam datasheet v1.3 1.pdf|DualCam Datasheet (EN)]]
(Updated on: 2025-07-08)

==Additional information==

https://teltonika-gps.com/lt/product/dualcam/

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

==Video presentation about DualCam==

<youtube>https://www.youtube.com/watch?v=1ccD4Yo1zFA&ab_channel=TeltonikaTelematics</youtube> 

[[Category:Video Solutions]]

File:Teltonika DualCam datasheet v1.3 1.pdf

2025-11-18T08:13:28Z

Edgar.dementenko:

Teltonika_DualCam_datasheet_v1.3 1

Camera Manual

2025-11-18T06:57:23Z

Edgar.dementenko: /* Product Specification */

__TOC__
==Package contents==
[[File:2022_07_14_08_41_38_Window.jpg|frameless|alt=|left|350x350px]]

There are several components included in the DualCam package box. These components are necessary to set up the camera and make it functional part of the vehicle.
 
'''1. Teltonika DualCam''' - the main camera unit used to record video/pictures. This unit has cable attached to it for connection purposes e.g. powering up and data transmission.
'''2. Sticky Tape 3M''' - option no. 1, a double sided sticky tape that can be used to stick the camera unit to the windscreen, this will allow it to be taken off later on without traces.
'''3. Screws''' - option no. 2, screws which can be used to screw the camera unit into the designated place just above the windscreen (should not be used on windows).

==Important Set-up links==
1. [[First Start|'''First Start''']] - in this section it is described how to set up the camera before first use. It is essential to know the process as without certain set-up processes the camera will not start or certain functions will not be accessible.

2. [[DualCam Configuration|'''DualCam Configuration''']] - this section describes the navigational way inside of the configurator which will be the main tool to set up the camera with the tracking device and make it functional.

3. [[DualCam Communication Protocol|'''DualCam Communication Protocol''']] - is used when setting up file upload to servers for quick downloading of data. It is essential part and functionality of the FMX tracking devices family which allows the users to upload data and files from the device effortlessly.

4. [[DualCam SMS commands|'''DualCam SMS commands''']] - in this section there are SMS sending commands which will help the user by providing easier access to command the device, or request information from it.

5. [[DualCam Firmware errata|'''DualCam Firmware errata''']] - every once in a while an update comes out which improves the functionalities of the DualCam systems and even introduces new ones. It is important to keep track of what is released in order to receive the most out of your DualCam solution.

6. [[DualCam FAQ|'''DualCam FAQ''']] - sometimes there will be rising questions to which the answers can not always be found. So a FAQ page has been released in order to collect non-standard information and potentially solve issues that the client might be facing.

==Product Specification==
<table class="nd-othertables" style="width: 73%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Technical data</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Supported by</td>
<td style="width: 8%; text-align:left">FMC125, FMC225, FMC650</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Day & Night Vision Effect</td>
<td style="width: 8%; text-align:left">Day (Color), Night (Black & White)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Angle of View</td>
<td style="width: 8%; text-align:left">Horizontal 120°, Vertical 70°</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Dual Camera</td>
<td style="width: 8%; text-align:left">Front and Rear (equal characteristics)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera casing dimensions</td>
<td style="width: 8%; text-align:left">126.2 x 36.6 x 36.6 mm</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera mounting</td>
<td style="width: 8%; text-align:left">Sticky tape (3M) or screws</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Supported microSD card sizes</td>
<td style="width: 8%; text-align:left">16 GB, 32 GB, 64 GB, 128 GB</td>
</tr>

<td style="width: 8%; text-align:left">Microphone</td>
<td style="width: 8%; text-align:left">Voice recording (Not installed in standard modification. Can be added on demand)</td>
</tr>
<tr></table>
 
<table class="nd-othertables" style="width: 73%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Electrical parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Input voltage range</td>
<td style="width: 8%; text-align:left">9 ~ 36 V</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Working temperature and humidity</td>
<td style="width: 8%; text-align:left">Temperature: -30 °C ~ 85 °C
Humidity: <90%
</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Power consumption</td>
<td style="width: 8%; text-align:left">220 mA</td>
</tr>
<tr></table>
 
<table class="nd-othertables" style="width: 68%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Function parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Real time clock (RTC) synchronization</td>
<td style="width: 8%; text-align:left">Available over FM (via NTP, NITZ or GNSS)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Picture resolution</td>
<td style="width: 8%; text-align:left">1280 x 720 (default) Configurable: 160 x 120; 320 x 240; 640 x 480; 1920 x 1080</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">IR Distance</td>
<td style="width: 8%; text-align:left">2 Meters</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Cable length</td>
<td style="width: 8%; text-align:left">RS232 (3.5 m)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video compression</td>
<td style="width: 8%; text-align:left">H.265</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video resolution</td>
<td style="width: 8%; text-align:left">720P </td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video storage</td>
<td style="width: 8%; text-align:left">2psc. MicroSD card (Max 64GB up to 40 hours of video)</td>
</tr>
</table>

== DualCam data transfer timing ==

{| class="wikitable"
|+
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image resolution'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image compression (%)*'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Video duration (s)'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of image'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of video'''
FMC125 4G
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Time interval (s) from trigger to files received on server
FMC125 4G
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Photo examples'''
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Image
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |136KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |21s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |23KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |7KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |3s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 100 com.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |350KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |53s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |53KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |17KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 100 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |764KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |121s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1920x1080 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |17s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1980x1080 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |37KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |7s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1920x1080 100 comp.jpeg|thumb]]
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Video
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 570KB, h265-495KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |76s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:480865 Dualcam apkirptas.mp4]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5+5 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 540KB, h265-222KB Front mp4 - 516KB, h265 - 390KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |122s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 1140KB, h265-990KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |151s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10+10 (both)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 1092KB, h265-444KB Front mp4 - 1032KB, h265 - 781KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |244s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |15 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 1710KB, h265-1485KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |227s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |15+15 (both)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 1639KB, h265-666KB Front mp4 - 1548KB, h265 - 1171KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |367s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |30 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 3420KB, h265-2970KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |453s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |30+30 (both)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 3277KB, h265-1331KB Front mp4 - 3096KB, h265 - 2342KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |733s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|}

'''* NOTE:''' This approximate time which we receive during testing in real cases can be different.

'''* NOTE''' Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.

[[Category:Teltonika DualCam]]

Wialon+DUAL CAM solution

2025-09-17T07:47:51Z

Edgar.dementenko: /* Wialon configuration */

__TOC__

== DUAL CAM on Wialon platform ==
For monitoring our device we have a lot of third-party platforms but only one at the moment which supports the [https://wiki.teltonika-gps.com/view/Teltonika_DualCam DUAL CAM] solution is Wialon.
In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from DUAL CAM.

== Device configuration ==

'''Step 1'''

Enable codec 8 extended.

[[File:Code 8.png|alt=|frameless]]

'''Step 2'''

Configure Domain and Port for the device to send data to the Wialon.
This information you will find then you register the device in Wialon

[[File:Server222.jpg|alt=|frameless]]

'''Step 3'''

Got to I/O element and select Rear Camera state and Front camera State priority to Low.

[[File:Io config.png|alt=|frameless|414x414px]]

'''Step 4'''

Go to RS232/RS485 and enable DualCam and configure the DualCam image sending setting for your needs.

[[File:DualcamRs232.png|alt=|frameless|410x410px]]

'''Step 5'''

Dual Cam server settings will be different:

Domain: Will be the same as from Wialon for the device

Port: 22148

[[File:Dual cam server 22.jpg|alt=|frameless]]

'''Step 6'''

Dual Cam Video settings, for the video settings only select Video frame rate to 30 FPS.

'''Note:''' Do not activate Video Sending Triggers in the configurator, because if you set this setting and the device triggered video the Wialon platform will not accept it. So only from the Wialon side must be set video commands in the next chapter Wialon settings we will show how to configure it.

'''Note:''' From now Wialon video solution needs additional activation due to billing release. Please contact your distributer or Wialon sale manager.

[[File:Video frame.png|alt=|frameless]]

== Wialon configuration ==

'''Note To enable in Wialon video section please contact Wialon.'''

'''Step 1'''

Login into Wialon and go to the Units and select New.

Configure the device and activate DualCam according to the GIF.

'''Note:''' You must enter device IMEI in "Unique ID" to identify device in Wialon platform.

[[File:Create new unit.gif]]

'''Step 2'''

Set the command to request a photo.

Go to Units tab and push on "wrench" icon.

Now select "Commands" and press new.

Then you should press "New" button to call out new window.

You'll need to create the name of the command and select the command type according to the GIF.

After that press ok and the command will appear.

[[File:Command set.gif]]

'''Step 3'''

After the command was created, you should to go to the "Monitoring" tab, select needed device and press the arrow and select GPRS.

After that select from which camera you need to get front-rear photo and press ok.

After you will see new window opened and command was sent, you will see that new picture arrived from the rear camera and then from the front.

[[File:Photo ask.gif]]

'''Step 4'''

Video request set up.

First open unit properties.

Than, go to the "Video" section, select "Set cameras", choose Cam 1 Cam 2 and pres ok twice.

[[File:Video settings.gif]]

'''Step 5'''

To request a video go to the "Video" section, select "Playback", select "save requested file to Files", select "Unit". After setting date and time of the video you need, press "Request". Wialon will generate a message and show the files in the "Files" section. Finally, it will be sent to Wialon.

'''Note:''' We recommend creating a notification with the same time intervals and no more than +/-15 sec. The video file duration can be max 30 sec (according device limitation).

[[File:Video requrest.gif]]

'''Step 6'''

If you need to set a video request from using trigger, it should be done from Wialon side.

Go to "Notification" tab, select "New", select "Device", and here choose required triggers.

In GIF below, you can see an example of the trigger set on Digital Input. After configuring the command and selecting "ok", command will appear and if Digital Input will be triggered you will receive video.

[[File:Video triggered.gif]]

Wialon+DUAL CAM solution

2025-09-17T07:47:26Z

Edgar.dementenko: /* Wialon configuration */

__TOC__

== DUAL CAM on Wialon platform ==
For monitoring our device we have a lot of third-party platforms but only one at the moment which supports the [https://wiki.teltonika-gps.com/view/Teltonika_DualCam DUAL CAM] solution is Wialon.
In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from DUAL CAM.

== Device configuration ==

'''Step 1'''

Enable codec 8 extended.

[[File:Code 8.png|alt=|frameless]]

'''Step 2'''

Configure Domain and Port for the device to send data to the Wialon.
This information you will find then you register the device in Wialon

[[File:Server222.jpg|alt=|frameless]]

'''Step 3'''

Got to I/O element and select Rear Camera state and Front camera State priority to Low.

[[File:Io config.png|alt=|frameless|414x414px]]

'''Step 4'''

Go to RS232/RS485 and enable DualCam and configure the DualCam image sending setting for your needs.

[[File:DualcamRs232.png|alt=|frameless|410x410px]]

'''Step 5'''

Dual Cam server settings will be different:

Domain: Will be the same as from Wialon for the device

Port: 22148

[[File:Dual cam server 22.jpg|alt=|frameless]]

'''Step 6'''

Dual Cam Video settings, for the video settings only select Video frame rate to 30 FPS.

'''Note:''' Do not activate Video Sending Triggers in the configurator, because if you set this setting and the device triggered video the Wialon platform will not accept it. So only from the Wialon side must be set video commands in the next chapter Wialon settings we will show how to configure it.

'''Note:''' From now Wialon video solution needs additional activation due to billing release. Please contact your distributer or Wialon sale manager.

[[File:Video frame.png|alt=|frameless]]

== Wialon configuration ==

'''Note To enable in Wialon video section please contact Wialon.'''
'''Step 1'''

Login into Wialon and go to the Units and select New.

Configure the device and activate DualCam according to the GIF.

'''Note:''' You must enter device IMEI in "Unique ID" to identify device in Wialon platform.

[[File:Create new unit.gif]]

'''Step 2'''

Set the command to request a photo.

Go to Units tab and push on "wrench" icon.

Now select "Commands" and press new.

Then you should press "New" button to call out new window.

You'll need to create the name of the command and select the command type according to the GIF.

After that press ok and the command will appear.

[[File:Command set.gif]]

'''Step 3'''

After the command was created, you should to go to the "Monitoring" tab, select needed device and press the arrow and select GPRS.

After that select from which camera you need to get front-rear photo and press ok.

After you will see new window opened and command was sent, you will see that new picture arrived from the rear camera and then from the front.

[[File:Photo ask.gif]]

'''Step 4'''

Video request set up.

First open unit properties.

Than, go to the "Video" section, select "Set cameras", choose Cam 1 Cam 2 and pres ok twice.

[[File:Video settings.gif]]

'''Step 5'''

To request a video go to the "Video" section, select "Playback", select "save requested file to Files", select "Unit". After setting date and time of the video you need, press "Request". Wialon will generate a message and show the files in the "Files" section. Finally, it will be sent to Wialon.

'''Note:''' We recommend creating a notification with the same time intervals and no more than +/-15 sec. The video file duration can be max 30 sec (according device limitation).

[[File:Video requrest.gif]]

'''Step 6'''

If you need to set a video request from using trigger, it should be done from Wialon side.

Go to "Notification" tab, select "New", select "Device", and here choose required triggers.

In GIF below, you can see an example of the trigger set on Digital Input. After configuring the command and selecting "ok", command will appear and if Digital Input will be triggered you will receive video.

[[File:Video triggered.gif]]

Wialon+DUAL CAM solution

2025-09-17T07:46:50Z

Edgar.dementenko: /* Wialon configuration */

__TOC__

== DUAL CAM on Wialon platform ==
For monitoring our device we have a lot of third-party platforms but only one at the moment which supports the [https://wiki.teltonika-gps.com/view/Teltonika_DualCam DUAL CAM] solution is Wialon.
In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from DUAL CAM.

== Device configuration ==

'''Step 1'''

Enable codec 8 extended.

[[File:Code 8.png|alt=|frameless]]

'''Step 2'''

Configure Domain and Port for the device to send data to the Wialon.
This information you will find then you register the device in Wialon

[[File:Server222.jpg|alt=|frameless]]

'''Step 3'''

Got to I/O element and select Rear Camera state and Front camera State priority to Low.

[[File:Io config.png|alt=|frameless|414x414px]]

'''Step 4'''

Go to RS232/RS485 and enable DualCam and configure the DualCam image sending setting for your needs.

[[File:DualcamRs232.png|alt=|frameless|410x410px]]

'''Step 5'''

Dual Cam server settings will be different:

Domain: Will be the same as from Wialon for the device

Port: 22148

[[File:Dual cam server 22.jpg|alt=|frameless]]

'''Step 6'''

Dual Cam Video settings, for the video settings only select Video frame rate to 30 FPS.

'''Note:''' Do not activate Video Sending Triggers in the configurator, because if you set this setting and the device triggered video the Wialon platform will not accept it. So only from the Wialon side must be set video commands in the next chapter Wialon settings we will show how to configure it.

'''Note:''' From now Wialon video solution needs additional activation due to billing release. Please contact your distributer or Wialon sale manager.

[[File:Video frame.png|alt=|frameless]]

== Wialon configuration ==
'''Note No enable in Wialon video section please contact Wialon.'''
'''Step 1'''

Login into Wialon and go to the Units and select New.

Configure the device and activate DualCam according to the GIF.

'''Note:''' You must enter device IMEI in "Unique ID" to identify device in Wialon platform.

[[File:Create new unit.gif]]

'''Step 2'''

Set the command to request a photo.

Go to Units tab and push on "wrench" icon.

Now select "Commands" and press new.

Then you should press "New" button to call out new window.

You'll need to create the name of the command and select the command type according to the GIF.

After that press ok and the command will appear.

[[File:Command set.gif]]

'''Step 3'''

After the command was created, you should to go to the "Monitoring" tab, select needed device and press the arrow and select GPRS.

After that select from which camera you need to get front-rear photo and press ok.

After you will see new window opened and command was sent, you will see that new picture arrived from the rear camera and then from the front.

[[File:Photo ask.gif]]

'''Step 4'''

Video request set up.

First open unit properties.

Than, go to the "Video" section, select "Set cameras", choose Cam 1 Cam 2 and pres ok twice.

[[File:Video settings.gif]]

'''Step 5'''

To request a video go to the "Video" section, select "Playback", select "save requested file to Files", select "Unit". After setting date and time of the video you need, press "Request". Wialon will generate a message and show the files in the "Files" section. Finally, it will be sent to Wialon.

'''Note:''' We recommend creating a notification with the same time intervals and no more than +/-15 sec. The video file duration can be max 30 sec (according device limitation).

[[File:Video requrest.gif]]

'''Step 6'''

If you need to set a video request from using trigger, it should be done from Wialon side.

Go to "Notification" tab, select "New", select "Device", and here choose required triggers.

In GIF below, you can see an example of the trigger set on Digital Input. After configuring the command and selecting "ok", command will appear and if Digital Input will be triggered you will receive video.

[[File:Video triggered.gif]]

Main Page

2025-09-10T04:36:24Z

Edgar.dementenko:

Welcome to Teltonika Telematics Wiki! 
Here you will find all technical information resources related to Teltonika Telematics products. Find your subject below or use the search bar to find the information you require. 
{| class="main-table" align="right" style="border-radius: 7px; border: 1px solid #808080; background: #F5F5F5"
!<span class="mw-customtoggle-1 mw-customtoggle-2 mw-customtoggle-3 mw-customtoggle-4 mw-customtoggle-5 mw-customtoggle-6 mw-customtoggle-7 mw-customtoggle-8 mw-customtoggle-9 mw-customtoggle-10 mw-customtoggle-11 mw-customtoggle-12 mw-customtoggle-13 mw-customtoggle-14 mw-customtoggle-15 mw-customtoggle-16" style="color:#0054A6">'''<big>Expand / collapse ALL</big>'''
|}

{| class="main-table w-100" style="height:auto; width:100%;" align="center"
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Basic_Trackers02.png|81x81px|link=|alt=]]
|-
|'''[[Basic Trackers]]'''
|-
|Rich tracking features at a competitive price
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-1">{{Template:Basic_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Easy_2.png|77x77px|link=|alt=]]
|-
|'''[[Fast & Easy Trackers]]'''
|-
|Fast installation and accurate tracking
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-2">
{{Template:Fast_&_Easy_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Advanced.png|74x74px|link=|alt=]]
|-
|'''[[Advanced Trackers]]'''
|-
|Flexible and sophisticated all-rounders
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-3">{{Template:Advanced_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Autonomous Trackers02.png|81x81px|link=|alt=]]
|-
|'''[[Autonomous Trackers]]'''
|-
|Autonomous smart devices for personal safety
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-4">
{{Template:Autonomous_Devices}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Sensors-8.png|82x82px|link=|alt=]]
|-
|'''Sensors'''
|-
|Wireless BLE accessories with smart features
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-5">
{{Template:Sensors}}
</div>
|-
|}
 
{| class="main-table w-100" style="height:auto; width:100%;" align="center"
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:OBD Trackers-8.png|69x69px|link=|alt=]]
|-
|'''[[OBD Trackers]]'''
|-
|Compact Plug & Play models to read OBD II data
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-6">
{{Template:OBD_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:CAN Trackers & Adapters-8.png|69x69px|link=|alt=]]
|-
|'''[[CAN Trackers & Adapters]]'''
|-
|Provide CAN bus data for all vehicle types
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-7">
{{Template:CAN_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Professional.png|74x74px|link=|alt=]]
|-
|'''[[Professional Trackers]]'''
|-
|Comprehensive solutions for professional use
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-8">
{{Template:Professional_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:E-Mobility Trackers-8.png|83x83px|link=|alt=]]
|-
|'''[[E-Mobility Trackers]]'''
|-
|Smart solutions for all types of electric mobility
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-9">
{{Template:E-Mobility_Trackers}}
</div>
| style="height:5%; width:20%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Video Solutions-8.png|78x78px|link=|alt=]]
|-
|[[Video Solutions|'''Video Solutions''']]
|-
|Innovative solutions to capture videos & photos
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-10">
{{Template:Video_Solutions}}</div>
|-
|}
 
-----------------------------------------
 
{| class="main-table w-100" style="height:auto; width:100%;" align="center"
| style="height:5%; width:16.6%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[File:info_icon.png|63x63px|link=|alt=]]
|-
|'''General information'''
|-
|<hr>
|-
|Product information resources
|-
|}

'''Resources [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-11">{{Template:General_information}}
</div>
| style="height:5%; width:16.6%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[File:iot_platforms_icon.png|64px|link=]]
|-
|'''[[Software & Applications]]'''
|-
|<hr>
|-
|Advanced tools and sophisticated applications
|-
|}

'''Product list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-12">{{Template:Software_&_Applications}}
</div>
| style="height:5%; width:16.6%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:Accessories-8.png|61x61px|link=|alt=]]
|-
|'''[[Accessories]]'''
|-
|<hr>
|-
|Readers, relays, cases, fuel monitoring, satdata & 1-wire solutions
|-
|}

'''Accessory list [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-13">{{Template:Accessories_list}}
</div>
| style="height:5%; width:16.6%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[File:faq_icon.png|64px|link=]]
|-
|'''FAQ'''
|-
|<hr>
|-
|Frequently Asked Questions
|-
|}

'''Topics [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-14">
{{Template:FAQ}}
</div>
| style="height:5%; width:16.6%; text-align:center; vertical-align: top; font-weight:400; margin: 0 auto;" |
{| style="width: 100%"
![[Image:EOL products -8.png|65x65px|link=|alt=]]
|-
|'''End of Life solutions'''
|-
|<hr>
|-
|End of Life products
|-
|}

'''EOL products [+/-]'''
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-15">
{{Template:EOL}}
</div>
|-
|}

[[File:Click here to start testing banner.jpg|alt=|link=Universal Device Test Guide]]

Video Solutions

2025-09-10T04:34:45Z

Edgar.dementenko: /* Description */

==Description==

Innovative solutions to capture videos & photos

'''Video Solution'''

[[Teltonika DualCam]]

[[Teltonika DashCam]]

[[Teltonika_ADAS]]

[[DSM]]

Video Solutions

2025-09-10T04:34:25Z

Edgar.dementenko: /* Description */

==Description==

Innovative solutions to capture videos & photos

'''Video Solution'''
[[Teltonika DualCam]]
[[Teltonika DashCam]]
[[Teltonika_ADAS]]
[[DSM]]

Video Solutions

2025-09-10T04:33:29Z

Edgar.dementenko: /* Description */

==Description==

Innovative solutions to capture videos & photos

'''Video Solution'''

[[https://wiki.teltonika-gps.com/view/Teltonika DualCam|DualCam]]

[[https://wiki.teltonika-gps.com/view/Teltonika DashCam|DashCam]

[[https://wiki.teltonika-gps.com/view/Teltonika ADAS|ADAS]]

[[https://wiki.teltonika-gps.com/view/DSM|DSM]]

[[DSM]]

Video Solutions

2025-09-10T04:32:46Z

Edgar.dementenko: /* Description */

Video Solutions

2025-09-10T04:32:12Z

Edgar.dementenko: Created page with "==Description== Innovative solutions to capture videos & photos '''Video Solution''' DualCam DashCam ADAS DSM"

==Description==

Innovative solutions to capture videos & photos

'''Video Solution'''
[[https://wiki.teltonika-gps.com/view/Teltonika DualCam|DualCam]]
[[https://wiki.teltonika-gps.com/view/Teltonika DashCam|DashCam]]
[[https://wiki.teltonika-gps.com/view/Teltonika ADAS|ADAS]]
[[https://wiki.teltonika-gps.com/view/DSM|DSM]]

DSM Firmware errata

2025-08-21T05:30:13Z

Edgar.dementenko: /* DSM Firmware Version */

__TOC__

===DSM Firmware Version===

We are always improving our device's performance, stability, and reliability. 
This document describes '''DSM platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
4gyd2i1HYC4XqBni7T7robKdUGuIYmRjXubVE7pS8yIAAAD0ABfJUm+SNLBCpdvuD+UoHMztegOBnLICjSh7oDYzFOWnuURqrhZHQBGisnU4mMf6cjVlB9YxvD/mwL4qOPdN85fuCsstsJ7kxXcRYxiAa5hD7w13ydfW+RjR+0BTHEr1yt5KKrw2yZvOhewONNonvcH3vHHDeCDihme+fkwSS02gbT0hri4uoIOoOmkrdWvbshD/wXeFEDDCCzGPhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMx6 device series==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.01.Rev.02''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added '''sdformat''' command support for DSM camera
|-
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DSM support for FMC650.
* '''NEW:''' Two camera support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.158''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-10-09}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Event timeout settings support via CFG

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.157''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DSM protocol update to 1.4 version
* Prevent modifying files after DSM Ready state is set
* IF file corrupted, DSM will return to ready state

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.156''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-05-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Increased event sound max value for voice setting
* Snapshot retransmit capability is added (periodic and by request)
* Prevent premature dsm state change from uploading to ready
* Reject unsolicited snapshot if upload buffer is full
* Multiple accsess to SD prevention
* Yawning sensitivity fixed value
* Increased UART buffer sizes
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.155''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial firmware release
* Added DSM support
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DSM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.7.1.T9 1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* SD format command

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.6.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Added the feature to make the snapshot of yawn on/off via FM
* Warning sounds fix

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.4.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Distraction Bus/Truck feature added
* Language error fixed(Spanish): Seat belt warning sound changed from English to Spanish
* Added features:
* Calibration timeout function
* Event processing starting from the second yawn event
* Added new snapshot and driver absence warning options

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-12-04}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Seat belt detection update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0.TR1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-08-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* New calibration page 30.0.0.1:18087
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issues related to SD retransmission function
* Fixed Timestamp values in UTC
* Fixed GPS coordinates changed to signed int
* Fixed Snapshot retransmission packet size
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-07}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
*stable DSM work
|-
|}

[[Category: DSM]]

ADAS Firmware errata

2025-08-21T05:29:56Z

Edgar.dementenko:

__TOC__

We are always improving our device's performance, stability, and reliability. 
This document describes '''ADAS platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
4gyd2i1HYC4XqBni7T7robKdUGuIYmRjXubVE7pS8yIAAAD0ABfJUm+SNLBCpdvuD+UoHMztegOBnLICjSh7oDYzFOWnuURqrhZHQBGisnU4mMf6cjVlB9YxvD/mwL4qOPdN85fuCsstsJ7kxXcRYxiAa5hD7w13ydfW+RjR+0BTHEr1yt5KKrw2yZvOhewONNonvcH3vHHDeCDihme+fkwSS02gbT0hri4uoIOoOmkrdWvbshD/wXeFEDDCCzGPhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMX:125/225/640/FMC650==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.01.Rev.02''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added '''sdformat''' command support for DSM camera
|-
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.105'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Video download improvements
* Overlay functions improvements
* Save to SD settings improvements
* Improve stable work

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.102'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* CRC calculation from a proper location not from a hardcoded Flash area
* Wrong server used with consecutive uploads
* Metadata request type changed for periodic snapshot
* Periodic image request by date instead of the current snapshot
* Fixed auto baud rate functionality unpausing scheduled jobs
* Prevent SD card access when downloading from MDAS
* Remount SD card when a disk error occurs
* Camera resolution configuration
* Default server\port in SMS requests
* Setting the overlay when it is disabled
* MDAS speed source selection
* Record sending with file details

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Crash in DDD files sending
* ADAS base update

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.10.Rev.103_ID1039'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Firmware for FMC640 and FMB640
* Base update to latest version
* Video/photo by request
* Periodic photo sending
|-
|}

==FMX125/FMX225 FIRMWARE VERSION==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX125/FMX225 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.1090'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update
* FIX: IO elements parameter ranges according to documentation
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-26 }}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version Meig Support
* Accessory monitoring port to MDAS9
* Firmware for FMX125 and FMX225 also for Meig
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-10-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version
* Minor configurator fixes
* Improved system stability and fixed general bugs
* Firmware for FMX125 and FMX225
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.242'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* FPW and FVSA bug fixes
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.240'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2020-10-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added ADAS camera support
* Initial release
|-
|}

==ADAS Firmware Version==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |ADAS FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.50'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [ADD] Spanish language
* [FIX] Speed from CAN
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.33'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [FIX] File transfer resume multiple presents for the same request
* [FIX] Packet index number in transfer resume CMD according to argument 2023.12.05
* [FIX] Packet index number in transfer resume
* [FIX] Video and snapshot transfer resume
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.15'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix Video and snapshot transfer resume
* Fix OSD ON/OFF functionality
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.10'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-14}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed malfunction of Lock Volume function
* Fix on vehicle file not applied properly via FMS command
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.03'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-22}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed miss usage of HEX values instead of DEC
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.01'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix where protocol version changed to 13 or 0x13
* Fix for wrong GPS coordinates offset
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.99'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-10}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video compression quality change via 0x7D
* Added file transfer resume via 0x9F
* Fixed abnormal packet communication during fw update
* Fixed speed value display on overlay
* Fixed option to use only FMx GPS data via 0x9C
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.95'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support 128 Gb SD card
* Video/photo by request
* Periodic photo sending
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.78'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Configurable video size supported
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.68'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-04-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Russian language added
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.12'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2019-07-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* LDW activation speed (mph) changed
|-

|}
[[Category: Teltonika ADAS]]

DashCam Firmware errata

2025-08-21T05:29:36Z

Edgar.dementenko: /* Firmware Version */

__TOC__

==Firmware Version==

We are always improving our device's performance, stability, and reliability. 
This document describes '''Dashcamplatform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
4gyd2i1HYC4XqBni7T7robKdUGuIYmRjXubVE7pS8yIAAAD0ABfJUm+SNLBCpdvuD+UoHMztegOBnLICjSh7oDYzFOWnuURqrhZHQBGisnU4mMf6cjVlB9YxvD/mwL4qOPdN85fuCsstsJ7kxXcRYxiAa5hD7w13ydfW+RjR+0BTHEr1yt5KKrw2yZvOhewONNonvcH3vHHDeCDihme+fkwSS02gbT0hri4uoIOoOmkrdWvbshD/wXeFEDDCCzGPhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMX125/FMX225/FMC650==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.01.Rev.02''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added '''sdformat''' command support for DSM camera
|-
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work with DualCam/DashCam.
* '''NEW:''' Two camera support.
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.112'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-11-23}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DualCam/DashCam support for FMC650.
|-
|}

==Firmware for FMC125==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.372'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Old timestamp shown issue fixed
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.371'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* NEW: QT and MEIG modem support
* Network stability improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.534'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* Port stability related changes
* Metadata version 4 support for DualCam and DashCam
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.531'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-02-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.663'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-07-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Network stability improvements.
|-

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.662'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DashCam accessory-monitoring feature
* DashCam support added.
* DualCam capture buffer loop
|-
|}

==Firmware for DashCam ==
{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DashCam FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-05-20}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added watch dog for camera to restart it self if camera will stuck
|-
|}

[[Category:Teltonika DashCam]]

DualCam Firmware errata

2025-08-21T05:29:16Z

Edgar.dementenko: /* Firmware Version */

__TOC__

==Firmware Version==

We are always improving our device's performance, stability, and reliability. 
This document describes '''DualCAM platform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
4gyd2i1HYC4XqBni7T7robKdUGuIYmRjXubVE7pS8yIAAAD0ABfJUm+SNLBCpdvuD+UoHMztegOBnLICjSh7oDYzFOWnuURqrhZHQBGisnU4mMf6cjVlB9YxvD/mwL4qOPdN85fuCsstsJ7kxXcRYxiAa5hD7w13ydfW+RjR+0BTHEr1yt5KKrw2yZvOhewONNonvcH3vHHDeCDihme+fkwSS02gbT0hri4uoIOoOmkrdWvbshD/wXeFEDDCCzGPhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMC125/FMC225/FMC650==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.01.Rev.02''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added '''sdformat''' command support for DSM camera
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work with DualCam/DashCam.
* '''NEW:''' Two camera support.
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.112'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-11-23}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DualCam/DashCam support for FMC650.
|-
|}

==Firmware for FMC125==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.372'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Old timestamp shown issue fixed
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.371'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* NEW: QT and MEIG modem support
* Network stability improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.534'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* Port stability related changes
* Metadata version 4 support for DualCam and DashCam
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.531'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-02-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.663'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-07-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Network stability improvements.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.662'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DualCam capture buffer loop
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.661'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-27}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Only one video download with video priority selected
* Camera state check logic fixed
* DualCam time zone in metadata changed to Unix time (UTC+0)
* Option to select file priority for Dual Cam
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.367'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-11-29}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Metadata duplicate
* Gnss sync issues. Mrg of 03.27.13.Rev.441 meig branch
* Metadata overwritten when 2 or more files queued for upload
* Timestamp drift after long time period in deep sleep
* MEIG modem throws errors and callstacks under heavy load
* SMS request response when video buffer is empty
* Periodic image buffer issues in deep sleep
* MEIG GPRS quality update
* Video buffer stuck after wrong timestamp
* Modem unstable at full DualCam buffer
* Camreq identical metadata issue
* DualCam video trigger max value
* DualCam custom image resolution
* DualCam fw version not available in logs
* SD card format response issue

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.362'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* NITZ gives unstable time
* Single side of camera footage is uploaded
* MEIG modem file upload issue
* DualCam base update for MEIG support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.365'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-03-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Minor improvements
* DualCam metadata timestamp mismatch
* Increased timeout for video data pack request
* CRC calculation mismatch after file upload resume
* Periodic image sending
* Add camera time zone parameter
* Added periodic time check and sync for the camera
* Adjusted DualCam command timeouts
* Added fixes and workarounds for cam command fails
* FPS parameter added to the meta data command
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.361'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-09-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.360'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-08-30}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Extended video and image sending configuration
* Added Domain and Port parameters to “camreq” command
* Extended “camreq” response
* Added “camgetver” command
* Fixed timestamp for video meta data
* Improved system stability and fixed general bugs
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.03.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-06-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added image sending trigger
* Ability to configure multiple video triggers
* Always enabled DualCam scenario support
* Improved system stability and fixed general bugs
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.00.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-02-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial release
|-
|}

==Firmware for DualCam ==
{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DUALCAM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-05-20}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added watch dog for camera to restart it self if camera will stuck
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.2'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video buffer pool,repair the write rate of the SD card
* Solved the bug when 35min can not download video
* Changed the logic of FPS setting and switching,the video saves the exact FPS of each video packet in the PTM_FRAME
* Improved the picture and video quality,image edge trimming
* Added flash upgrade mode
* Modified command to get Image quality
* Resolved the problem that the camera restarts after switching the OSD switch
* Optimized setting video frame rate without restarting the camera
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Improved stability and fixes of camera data packets
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.2'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-06-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issue with front camera crash if picture size is too large
* Added command to check the camera version
* Improved system stability and fixed general bugs
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021- 02-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial release
|-
|}

[[Category:Teltonika DualCam]]

DSM SMS commands

2025-08-19T10:36:18Z

Edgar.dementenko: /* DSM SD card forrmat command */

__TOC__

==Camera SMS commands==
{| class="wikitable"
|'''Command'''
|'''Arguments'''
|'''Explanation'''
|-
|dsm_camreq:
|<file_type>, <file_source>, <domain>,<port>
|Captures appropriate file with the provided details. If the connection to server is opened, then files immediately become available for download. If not, then the connection is tried to be made.

If <domain> and <port> parameters are included, the device will send footage of the command to that address.
|}
The arguments are as follows:

<file_type>

* 2 – Current snapshot;

<file_source>

* 4 – DSM (hardcoded). 0 is reserved for ADAS; 1, 2 and 3 are reserved for DualCam project;

<domain>

* Optional – domain to where file has to be sent;

<port>

* Only required if domain is used.

''Examples:''

dsm_camreq:2,0,132.145.51.134,3333 – request current snapshot from camera and upload to 132.145.51.134 server with 3333 port.

=== General camera information ===
This command sends general information retrieved from the camera.
{| class="wikitable"
|'''Command'''
|'''Arguments'''
|'''Explanation'''
|-
|dsm_getinfo
|None
|Used to get general camera information
|}
The response message structure is as follows:

Date: <date>,FW:<version>,Err:<error_code>,Rec:<rec_status>,GPS:<lat>|<lon>|<gps_status>,Event:<active_event>|<g_sensor_event>,State:<camera_state>

Here:

* <date> – date and time extracted from the camera in the following format: <YYYY>.<MM>.<nowiki><DD> <hh>:<mm>:<ss></nowiki>

* <version> – camera FW version in the following format: <major>.<minor>.<build>
* <error_code> – camera error code
* <rec_status> – recording status
* <lat>, <lon> – GPS coordinates (4 decimal places precision); <gps_status> – GPS status
* <active_event> – active event(s) mask detected by the camera; <g_sensor_event> – g-sensor active flag
* <camera_state> – current working state (from the device)

For possible field values refer to I/O elements or the DSM protocol description.

=== DSM SD card forrmat command ===
This command is used to format the DSM SD card. To use this command, your FMC650 firmware must be at least '''03.01.01.Rev.02.SPEC ID1111''' and DSM FW at least '''2.7.1.T9'''
{| class="wikitable"
|'''Command'''
|'''Arguments'''
|'''Explanation'''
|-
|dsm_sdformat
|None
|Used to get format camera SD card
|}

[[Category: DSM]]

DSM Configuration

2025-08-18T08:33:49Z

Edgar.dementenko: /* Distraction */

__TOC__

==DSM calibration==

If it is the first DSM launch, please make sure to calibrate the device, and change the important settings, to ensure the correct device working: [[DSM Calibration]]

==Device configuration for FMx640==

On this page, you will be able to find information about the gerenal configuration and connection of DSM camera with the FMX640 tracking device. Information about different parameters required to set up the DSM camera are also described in this page. To start off, firstly follow the instructions on how to connect DSM camera with the FMX640 device, once the camera is connected to the tracking device, connect FMX640 to computer and open the required configurator application. Select your device and follow instructions below:

*It is necessary to change '''Data Protocol''' to [[Codec#Codec_8_Extended | Codec 8 Extended]] in the "System" tab.

[[Image:Data_protocol.gif|300px]]

*In '''RS232\RS485''' settings under '''RS232 Settings''' navigate to '''COM1 settings''' and in '''Mode''' parameter selection, open the drop-down menu and select '''DSM''', please also keep the baudrate set to default which is '''115200'''

[[File:Dsm rs232.gif]]

*Make sure to change '''DSM I/O''' feature '''Priorities''' to ''Low, High or Panic'' (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: '''Yawning - Low priority - Low/High level 0 - Operand On Exit'''. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server.

[[File:Dsm io.gif]]

*In order to receive event data, a server has to be configured. Navigate to '''GPRS''' settings and enter the server details under '''Server #1 Settings'''. Details such as domain name and port number are required to be entered.

[[File:DSM server.jpg|300px]]

==DSM configuration for FMx650==

'''(!) Required firmware version - 03.00.14.Rev.114'''. [[DSM_Firmware_errata|Firmware errata.]]

*Make sure '''Data Protocol''' is set to [[Codec#Codec_8_Extended | Codec 8 Extended]]

[[Image:Data_protocol.gif|300px]]

*In ''RS232 \ RS485 settings tab'', make sure to enable '''Camera interface''' by "Enable", and select '''DSM''' in the Mode drop-down menu, afterwards '''DSM COM1''' and '''Camera I/O''' should appear in the tab list.

[[Image:DSM config.gif|600px]]

*Make sure to change '''Camera I/O''' camera state '''Priorities''' to ''Low''
'''
[[File:DSM IO.gif|500px]]
'''

*In appeared ''DSM COM1'' tab, make sure to '''configure everything by your needs''', and do not forget to complete the '''"Domain"''' and '''"Port"''' settings in ''File upload settings''

[[File:DSM COM1.png|500px]]

*'''''NOTE:''''' ''This is a base setup for the device to work properly. Other device configuration is made according to your needs.

===Connecting two cameras simultaneously for FMx650===
------------------
The new feature for FMx650 DSM configuration, which is available from '''03.00.14.Rev.114 iCamera''' allows you to connect two of your cameras at once. Method for connection and configuration stays the same, for this you are only required to choose '''two''' cameras in '''"RS232 \ RS485"''' tab from the configurator.

In the new functionality, you are able to connect any combo of the cameras by your wish, as an example: you are able to connect ''DSM/Dualcam'', ''DashCam/DualCam'', ''DSM/DSM'', ''DualCam/DualCam'' and etc.

[[File:Twincamera.gif|500px]]

==General settings==
[[File:Dsm gensettings.jpg|300px]]

*Measurement Units - can either be metric or imperial, Global standard are metric units while in some cases like US and UK - measurement standard is Imperial units.
*Volume level - sets the volume level of DSM camera alerts
*Camera block repeat alarm - DSM camera will release a warning sound if the camera is blocked. This setting allows the camera to repeat warnings until the camera view is clear.

==Image/recording settings==
[[File:Dsm img-recsettings.jpg|300px]]

*Voice recording - Enable voice recording on event activation.
*Overlay text - Shows overlay text for time and date on the picture.
*Mirror display - A choice whether the camera should take mirrored images or not.
*Video format - A choice of video format depending on the region.
*Recording ratio - Choose what type of files should occupy the SD card mostly. 1st number is continuous footage, 2nd one is g-sensor data and 3rd is DSM event footage data.
*G-sensor sensitivity - Camera has its own sensor to detect crashes and its sensitivity can be adjusted.

==Event settings==
[[File:Dsm event-settings.jpg|300px]]

*Working speed source - '''Global''' setting will set the same speed limit for all of the settings which require speed limit for activation while '''Individual''' settings will allow each parameter to have its own configurable speed limit setting for their events.
*Automatic transmit (global) - Global setting for automatic image transmission when the event is active, only works for events that do not have this setting ('''Yawning''').

==Drowsiness==
[[File:Dsm drowsiness.jpg|300px]]

*Activation - Enables or disables Drowsiness function, Sound type of each event can also be changed (0,1,2 or 3 (voice) types).
*Vibration - Upon Drowsiness event activation, vibration can also be activated.
*Sensitivity - this parameter is for the Drowsiness sensitivity setting 1-3 (1- lowest, 3 - highest).
*Automatic transmit - Transmits images to the server when the event is active. Also has working speed parameter which sets the minimum required speed for the event to become enabled, leave 0 for this setting to be off.

==Distraction==
[[File:Dsm distraction.jpg|300px]]

*Activation - Enables or disables Distraction function, Sound type of each event can also be changed (0,1,2 or 3 (voice) types).
*Vibration - Upon Distraction event activation, vibration can also be activated.
*Sensitivity - this parameter is for the Distraction sensitivity setting 1-3 (1- lowest, 3 - highest).
*Automatic transmit - Transmits images to the server when the event is active. Also has working speed parameter which sets the minimum required speed for the event to become enabled, leave 0 for this setting to be off.
*'''Please note''' that even if the distraction detection speed is set to 0 km/h, the function is not limited to activation above 10 km/h. The 10 km/h threshold is related to the auto-calibration process.

==Phone==
[[File:Dsm phone.jpg|300px]]

*Activation - Enables or disables Phone function, Sound type of each event can also be changed (0,1,2 or 3 (voice) types).
*Vibration - Upon Phone event activation, vibration can also be activated.
*Sensitivity - this parameter is for the Phone sensitivity setting 1-3 (1- lowest, 3 - highest).
*Automatic transmit - Transmits images to the server when the event is active. Also has working speed parameter which sets the minimum required speed for the Phone event to become enabled, leave 0 for this setting to be off.

==Smoking==
[[File:Dsm smoking.jpg|300px]]

*Activation - Enables or disables Smoking function, Sound type of each event can also be changed (0,1,2 or 3 (voice) types).
*Vibration - Upon Smoking event activation, vibration can also be activated.
*Sensitivity - this parameter is for the Smoking sensitivity setting 1-3 (1- lowest, 3 - highest).
*Automatic transmit - Transmits images to the server when the event is active. Also has working speed parameter which sets the minimum required speed for the Smoking event to become enabled, leave 0 for this setting to be off.

==Yawning==
[[File:Dsm yawning.jpg|300px]]

*Activation - Enables or disables Yawning function, Sound type of each event can also be changed (0,1,2 or 3 (voice) types).
*Vibration - Upon Yawning event activation, vibration can also be activated.
*Sensitivity - this parameter is for the Yawing sensitivity setting 1-3 (1- lowest, 3 - highest).
*Automatic transmit - Transmits footage to the server automatically upon event activation. Automatic transmission is triggered when yawning is detected at least twice within 1 minute. '''Note: DSM FW version needs to be 2.5.1.T2 or higher.'''
*Working speed - Working speed parameter which sets the minimum required speed for the Smoking event to become enabled, leave 0 for this setting to be off. '''Note:''' This parameter does not have Automatic transmit parameter, therefore, upon activation, this event is not going to be configured to send images/audio to the server, however this setting can be activated in '''Event settings''' under Automatic transmit (Global) parameter.

==File upload settings==

This section is meant for image sending only, parameter data sending if configured, is done through GPRS settings tab where most of data is configured for sending.

[[File:Dsm file-upload.jpg|300px]]

*Domain - Domain name where the image/audio files should be sent, can be a website or IP address (e.g. 123.123.12.198).
*Port - Port number which is assigned to a domain name and works as an entry point to the server.
*Periodic image sending - Periodic image sending can be sent in order to send images to the server at a configurable time period.
*Image sending trigger - Triggers can be set in order to activate image sending. Crash/Towing/Idling/Geofence/Unplug/Green driving are actual features of the FMX640 family devices and are configured under '''[[FMC640_Features_settings | Features]] / [[FMC640_Accelerometer_Features_settings | Accelerometer Features]] / [[FMC640_Manual_Geofence_zones | Geofence]] / [[FMC640_Trip/Odometer_settings | Trip/Odometer]]''' Tabs.

==Crash Detection Functionality using DOUT==

'''The crash detection feature''' is a crucial capability provided by our device. It enhances evidential documentation through video or photo evidence in the event of a crash. However, activating this functionality necessitates a direct connection of the camera to a power source. Nonetheless, such a direct connection can lead to '''battery drainage'''.

To circumvent this issue, we recommend utilizing DOUT and a relay for connection. This setup enables control via SMS or GPRS command, or through predefined scenarios within our device. By activating DOUT post-ignition, the camera receives power, allowing it to function and record evidence even after the ignition is turned off following a crash. '''For your convenience, the connection scheme can be found here: [[DSM First Start]]'''

'''It is important to note that in the event of a fatal crash where fatalities may occur,''' we cannot guarantee the retrieval of video or photo evidence due to the severity of the accident. Moreover, both the camera and the device itself may sustain irreparable damage in such instances

[[Category:DSM]]

DSM SMS commands

2025-08-18T07:51:07Z

Edgar.dementenko:

__TOC__

==Camera SMS commands==
{| class="wikitable"
|'''Command'''
|'''Arguments'''
|'''Explanation'''
|-
|dsm_camreq:
|<file_type>, <file_source>, <domain>,<port>
|Captures appropriate file with the provided details. If the connection to server is opened, then files immediately become available for download. If not, then the connection is tried to be made.

If <domain> and <port> parameters are included, the device will send footage of the command to that address.
|}
The arguments are as follows:

<file_type>

* 2 – Current snapshot;

<file_source>

* 4 – DSM (hardcoded). 0 is reserved for ADAS; 1, 2 and 3 are reserved for DualCam project;

<domain>

* Optional – domain to where file has to be sent;

<port>

* Only required if domain is used.

''Examples:''

dsm_camreq:2,0,132.145.51.134,3333 – request current snapshot from camera and upload to 132.145.51.134 server with 3333 port.

=== General camera information ===
This command sends general information retrieved from the camera.
{| class="wikitable"
|'''Command'''
|'''Arguments'''
|'''Explanation'''
|-
|dsm_getinfo
|None
|Used to get general camera information
|}
The response message structure is as follows:

Date: <date>,FW:<version>,Err:<error_code>,Rec:<rec_status>,GPS:<lat>|<lon>|<gps_status>,Event:<active_event>|<g_sensor_event>,State:<camera_state>

Here:

* <date> – date and time extracted from the camera in the following format: <YYYY>.<MM>.<nowiki><DD> <hh>:<mm>:<ss></nowiki>

* <version> – camera FW version in the following format: <major>.<minor>.<build>
* <error_code> – camera error code
* <rec_status> – recording status
* <lat>, <lon> – GPS coordinates (4 decimal places precision); <gps_status> – GPS status
* <active_event> – active event(s) mask detected by the camera; <g_sensor_event> – g-sensor active flag
* <camera_state> – current working state (from the device)

For possible field values refer to I/O elements or the DSM protocol description.

=== DSM SD card forrmat command ===
This command is used to format the DSM SD card. To use this command, your FMC650 firmware must be at least 03.01.01.Rev.02.SPEC ID1111.
{| class="wikitable"
|'''Command'''
|'''Arguments'''
|'''Explanation'''
|-
|dsm_sdformat
|None
|Used to get format camera SD card
|}

[[Category: DSM]]

DSM Firmware errata

2025-08-08T08:59:47Z

Edgar.dementenko: /* Firmware for FMC650 */

__TOC__

===DSM Firmware Version===

We are always improving our device's performance, stability, and reliability. 
This document describes '''DSM platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMx6 device series==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DSM support for FMC650.
* '''NEW:''' Two camera support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.158''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-10-09}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Event timeout settings support via CFG

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.157''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DSM protocol update to 1.4 version
* Prevent modifying files after DSM Ready state is set
* IF file corrupted, DSM will return to ready state

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.156''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-05-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Increased event sound max value for voice setting
* Snapshot retransmit capability is added (periodic and by request)
* Prevent premature dsm state change from uploading to ready
* Reject unsolicited snapshot if upload buffer is full
* Multiple accsess to SD prevention
* Yawning sensitivity fixed value
* Increased UART buffer sizes
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.155''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial firmware release
* Added DSM support
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DSM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.7.1.T9 1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-08}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* SD format command

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.6.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Added the feature to make the snapshot of yawn on/off via FM
* Warning sounds fix

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.4.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Distraction Bus/Truck feature added
* Language error fixed(Spanish): Seat belt warning sound changed from English to Spanish
* Added features:
* Calibration timeout function
* Event processing starting from the second yawn event
* Added new snapshot and driver absence warning options

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-12-04}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Seat belt detection update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0.TR1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-08-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* New calibration page 30.0.0.1:18087
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issues related to SD retransmission function
* Fixed Timestamp values in UTC
* Fixed GPS coordinates changed to signed int
* Fixed Snapshot retransmission packet size
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-07}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
*stable DSM work
|-
|}

[[Category: DSM]]

DSM Communication Protocol

2025-07-21T06:41:57Z

Edgar.dementenko: /* Resume file transfer command (CMD_ID 0x0002) */

==Server side configuration source code==
'''NOTE: This is a "test server" version, dedicated for initial functionality testing (which could also be done via cloudview platform) with 1-2 cameras. Multithreaded (and multiple device) handling on the server side is up to the client to do additional development and/or necessary optimizations and modifications, to support more than 1-2 cameras at the same server instance.'''

Optionally - platforms that already support camera integrations could be used.

Together with the communication protocol, this server side source code can be downloaded and implemented upon personal servers for the ease of use and configuration, please see index.js, debug.js and protocol.js which can be copied into the server.

Server files & source code can be downloaded [https://drive.teltonika.lt/f/c9a94dd55d7d48bc81cd/?dl=1 here].

Please see index.js, debug.js and protocol.js files. These files contain required support for camera downloads and they can be inserted straight into server. The folder can also be run as server and will work with file downloads, so if personal server is not available, there is always a possibility to use this default server.

[[File:Server123.png|center]]

All that is required is an open Port on the computer and that port has to be written in run_server.bat file. Also by clicking on Readme file, you will be able to see the settings which you can enter into that run_server.bat file by right clicking the mouse button on it and choosing edit option. These settings include choices like DualCam download, ADAS file download or Auto mode, Metadata inclusion and etc.

[[File:Server edit.png|center]]

In this case, Notepad++ is chosen but you can choose any text editor in order to update the file.

== File upload procedure ==
When a snapshot file is requested via SMS/GPRS command firstly the device checks if it has SD card inserted and if it has the requested snapshot in the SD card. The file is present, file upload is immediately triggered, otherwise the device checks if DSM camera is connected to FMX6yz and tries to download the file – file upload to the server starts only after the file was saved to FMXs SD card.

== General command structure ==
General communication packet structure is as in table below. It consists of the command ID (2 bytes), data length of command and payload.

Table 5 General command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''Data ([data length] number of bytes)'''
|-
|0xFFFF
|0xFFFF
|<command data>
|}

== Modified file transfer protocol ==

=== Initialization packet ===
On connection, the device sends an initialization packet.

Table 6 Initialization packet structure
{| class="wikitable"
|'''Header (2 bytes)'''
|'''Protocol ID (2 bytes)'''
|'''IMEI (8 bytes)'''
|'''Settings (4 bytes)'''
|-
|0x0000
|0xFFFF
|0xFFFFFFFFFFFFFFFF
|0xFFFFFFFF
|}
Protocol ID – just a reference for the protocol version that is running on device (for server cross compatibility with older versions).

Settings flag contains information on what is available for download. Structure provided:

Table 7 Settings bytes structure
{| class="wikitable"
| colspan="32" |'''Settings, 4 B'''
|-
| colspan="8" |'''Byte 3'''
| colspan="8" |'''Byte 2'''
| colspan="8" |'''Byte 1'''
| colspan="8" |'''Byte 0'''
|-
|
|
|
|
|
|
|*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|-
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|}
<nowiki>*</nowiki> This bit will be set to 1 to indicate, that device has a file ready to upload to server. Server has to send file path request (0x000C) command to know what file is ready for upload.

=== Close session command (CMD_ID 0x0000) ===
In case when device connects to the server, but server does not expect it to connect, server will respond by sending close command (0x0000) after which connection will be terminated. This command is also used when the device connects to server for custom file sending and server finishes to send all custom files to device.

Table 8 Close session command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|-
|0x0000
|0x0000
|}

=== Request file path (CMD_ID 0x000C) ===
First after connecting to server and seeing bit set in init packet the server should send file path request command (0x000C).

Table 9 Request file path command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''Blank field (2 bytes)'''
|-
|0x000C
|0x0002
|0x0000
|}

=== File path response (CMD_ID 0x000D) ===
This is a response to file path request (0x000C) command.

Table 10 File path response command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''Blank field (Variable)'''
|-
|0x000D
|1-512
|<file path, or \0>
|}

=== File metadata request command (CMD_ID 0x000A) ===
This command is used for retrieving extra information about the file requested by the server with the command 0x000C.

Table 11 File metadata request command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|-
|0x000A
|0x0000
|}

=== File metadata response command (CMD_ID 0x000B) ===
This command is a response to the metadata request command 0x000A.

Response command returns information about a file: Unix timestamp, file type, trigger, GPS coordinates and video length. All values are sent as unsigned integers.

Table 12 File metadata response command structure
{| class="wikitable"
|'''Command ID'''
|'''Data length'''
|'''Unix timestamp'''

'''(4 bytes)'''
|'''File type'''

'''(1 byte)'''
|'''Trigger'''

'''(1 byte)'''
|'''Latitude'''

'''(4 bytes)'''
|'''Longitude'''

'''(4 bytes)'''
|'''DSM event'''

'''(2 bytes)'''
|'''Driver name (10 bytes)'''
|-
|0x000B
|0x000F
|0xFFFFFFFF
|0xFF
|0xFF
|0xFFFFFFFF
|0xFFFFFFFF
|0xFFFF
|0xFFFFFFFFFFFFFFFFFFFF
|}

Table 13 File metadata description
{| class="wikitable"
|'''Data'''
|'''Description'''
|-
|Unix timestamp
|Timestamp at the time of triggering an upload or the timestamp of an SMS request. For periodic images (current snapshots) the timestamp is updated when file info is received from the camera.
|-
|File type
|File media type.

2 – current snapshot
|-
|Trigger
|These trigger values are not to be confused with the values of [[DSM Communication Protocol#%20Camera%20configurable%20parameters|configurable trigger parameters]].

0 – none

1 – DIN1

2 – DIN2

3 – DIN3

4 – DIN4

5 – crash

6 – towing

7 – idling

8 – geofence

9 – unplug

10 – green driving

11 – server request (camreq SMS or GPRS command)

12 – periodic

13 – DSM event

14 - DSM file retransmit
|-
|Latitude
| rowspan="2" |GPS coordinates at the time of triggering an upload. For periodic images (current snapshots) the coordinates are updated when file info is received from the camera. To get coordinates with a decimal point, these values should be divided by 1000000.
|-
|Longitude
|-
|DSM Event
|Multiple DSM events can be triggered at the same time and represented with multiple set bits:

0 bit – Drowsiness

1 bit – Distraction

2 bit – Yawning

3 bit – Phone

4 bit – Smoking

5 bit – Driver absence

6 bit – Mask

7 bit – Seat belt

8 bit – G-sensor
|-
|Driver name
|A 10-character reversed string for the recognized driver’s name.
|}

=== File request command (CMD_ID 0x0008) ===
After device is connected for file upload server initiates file transfer by sending this command.

Table 14 File request command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''File identifier'''
|-
|0x0008
|0xFFFF
|''File path has to be requested first via 0x000C command.''
|}
''Device should answer with start command (0x0001) indicating size and CRC of requested file.''

=== Start file transfer command (CMD_ID 0x0001) ===
After device received file request command from server (0x0008) device sends start command (0x0001) with file data (file size in bytes, CRC).

Table 15 Start file transfer command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''File Size (4 bytes)'''
|'''File CRC (2 bytes)'''
|-
|0x0001
|0x0006
|0xFFFFFFFF
|0xFFFF
|}

=== Resume file transfer command (CMD_ID 0x0002) ===
In a response to the start command (0x0001) a resume command (0x0002) must be sent from server.

Table 16 Resume file transfer command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''Packet offset (in bytes) (4 bytes)'''
|-
|0x0002
|0x0004
|0x00000000
|}
To begin file transfer from the start, offset should be set to 0 (4 bytes value). In case when the file transfer was interrupted, to resume file transfer, offset can be set to the desired value (1 ≤ <offset (in bytes)> ≤ <file_packets>).

=== Synchronize file transfer command (CMD_ID 0x0003) ===
In a response to the resume command (0x0002), sync command (0x0003) is sent from device.

Table 17 Synchronize file transfer command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''File offset (4 bytes)'''
|-
|0x0003
|0x0004
|0xFFFFFFFF
|}
By sending the sync command it is ensured that next data command will contain file data starting from the specified offset.

=== File data transfer command (CMD_ID 0x0004) ===
After sending the sync command (0x0004) file data transfer is started by sending data commands (0x0004).

Table 18 File data transfer command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''File data (up to 1024 bytes)'''
|'''Data CRC (2 bytes)'''
|-
|0x0004
|Up to 0x0402
|0xFF…
|0xFF
|}
File data is split into 1024-byte parts, each part wrapped into data command and sent.

'''''Note:''' if command with a bad CRC is received, the resume command (0x0002) should be sent with last valid file offset. After receiving the resume command, server will stop sending data commands (0x0004) and continue communication from “Resume file transfer command (CMD_ID 0x0002)” step.''

''CRC polynomial expression: '''0x8408'''''

''When calculating CRC, the initial value is the same as the CRC value from the previously received packet (0x0004).''

=== File transfer status command (CMD_ID 0x0005) ===
After file transfer is completed and no more files are required from device, server should send the file transfer command (0x0005) with completed status (0x00000000) to the device.

'''Note:''' this command does not work after executing repeat init command (0x0009) – in this case the server should send close session command (0x0000) mentioned above.

Table 19 File transfer status command structure
{| class="wikitable"
|'''Command ID (2 bytes)'''
|'''Data length (2 bytes)'''
|'''Status (4 bytes)'''
|-
|0x0005
|0x0004
|0xFFFFFFFF
|}
In case of server using invalid arguments, commands or not following the file request flow, the device will send this command with status field set to one of the few possible error codes (provided below).

Table 20 File transfer possible status values
{| class="wikitable"
|'''Status value (hexadecimal)'''
|'''Description'''
|'''Notes'''
|-
|0x00000000
|File transfer process completed
|Sent from server
|-
|0x00000002
|Failed to close GPRS
|Sent from device
|-
|0x00000003
|Failed to close socket
|Sent from device
|-
|0x00000005
|Invalid response from server to init packet
|Sent from device
|-
|0x00000011
|This error code forces the device to disconnect from server
|Sent from device. Possible causes:

· The requested file is not available by camera
|}
After receiving the transfer completed command device should disconnect from the server.

=== Initialization packet repeat command (CMD_ID 0x0009) ===
When sent, the initialization packet is repeated. This is used, when all of the files are downloaded and additional check is carried out for any additional files, that may have been captured during the download operation.

[[Category: DSM]]

ADAS Communication Protocol

2025-07-21T05:46:21Z

Edgar.dementenko: /* Resume file transfer command (CMD_ID 0x0002) */

__TOC__

==Server side configuration source code==
'''NOTE: This is a "test server" version, dedicated for initial functionality testing (which could also be done via cloudview platform) with 1-2 cameras. Multithreaded (and multiple device) handling on the server side is up to the client to do additional development and/or necessary optimizations and modifications, to support more than 1-2 cameras at the same server instance.'''

Optionally - platforms that already support camera integrations could be used.

Together with the communication protocol, this server side source code can be downloaded and implemented upon personal servers for the ease of use and configuration, please see index.js, debug.js and protocol.js which can be copied into the server.

Server files & source code can be downloaded [https://drive.teltonika.lt/f/c9a94dd55d7d48bc81cd/?dl=1 here].

Please see index.js, debug.js and protocol.js files. These files contain required support for camera downloads and they can be inserted straight into server. The folder can also be run as server and will work with file downloads, so if personal server is not available, there is always a possibility to use this default server.

[[File:Server123.png|center]]

All that is required is an open Port on the computer and that port has to be written in run_server.bat file. Also by clicking on Readme file, you will be able to see the settings which you can enter into that run_server.bat file by right clicking the mouse button on it and choosing edit option. These settings include choices like DualCam download, ADAS file download or Auto mode, Metadata inclusion and etc.

[[File:Server edit.png|center]]

In this case, Notepad++ is chosen but you can choose any text editor in order to update the file.

==General command structure==
General communication packet structure is as in table below. It consists of CMD_ID (2 bytes), Data length of command and payload.
{| class="wikitable"
| colspan="18" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="17" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data
|-
| colspan="18" |2 bytes
| colspan="14" |2 bytes
| colspan="17" |[data length] bytes
|}

==Modified file transfer protocol==

'''Initialization packet'''
On connection, the device sends an initialization packet.
{| class="wikitable"
| colspan="15" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Header (0x0000)
| colspan="18" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Protocol ID
| colspan="10" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |IMEI
| colspan="13" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Settings
|-
| colspan="15" |2 bytes
| colspan="18" |2 bytes
| colspan="10" |8 bytes
| colspan="13" |4 bytes
|}
Protocol ID – just a reference for the protocol version that is running on device (for server cross compatibility with older versions).

Settings flag contains information on what is available for download. Structure provided:
{| class="wikitable"
| colspan="57" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Settings, 4 B
|-
| colspan="18" |Byte 3
| colspan="16" |Byte 2
| colspan="10" |Byte 1
| colspan="13" |Byte 0
|-
| colspan="2" |
| colspan="2" |
| colspan="3" |
| colspan="2" |
| colspan="3" |
| colspan="2" |
| colspan="2" |*
| colspan="2" |
| colspan="3" |
| colspan="3" |
| colspan="2" |
| colspan="2" |
|
|
| colspan="2" |
| colspan="2" |
|
| colspan="2" |
|
|
|
|
| colspan="2" |
|
| colspan="2" |
|
| colspan="3" |
|
|
| colspan="2" |
| colspan="2" |
|
|}

'''Close session command (CMD_ID 0x0000)'''
In case when device connects to the server, but server does not expect it to connect, server will respond by sending CLOSE command after which connection will be terminated. This command is also used then device connect to server for custom file sending and server finishes to send all custom files to device.
{| class="wikitable"
| colspan="20" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="13" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
|-
| colspan="20" |0x0000
| colspan="13" |0x0000
|}

==Request file path (CMD_ID 0x000C)==
First after connecting to server and seeing bit set in init packet the server should send file path request command.
{| class="wikitable"
!rowspan="1" style="width: 350px; background: #0054A6; color: white;"|Command ID
!rowspan="1" style="width: 350px; background: #0054A6; color: white;"|Data length
!rowspan="1" style="width: 350px; background: #0054A6; color: white;"|Blank field (2 bytes)
|-
|0x000C
|0x0002
|0x0000 (always same value)
|}

==File path response (CMD_ID 0x000D)==
This is a response to file path request (0x000C) command.
{| class="wikitable"
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="13" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Blank field (Variable)
|-
| colspan="14" |0x000D
| colspan="11" |1-512
| colspan="13" |<file path, or \0>
|}

==File request command (CMD_ID 0x0008)==
After device is connected for file upload server initiates file transfer by sending FILE REQ command.
{| class="wikitable"
| colspan="9" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="10" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="19" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File Identifier
|-
| colspan="9" |0x0008
| colspan="10" |2 bytes
| colspan="19" |File path has to be requested first via 0x000C command.
|}
Device should answer with START command described above indicating size and CRC of requested file.

==Start file transfer command (CMD_ID 0x0001)==
After device received file request command from server (0x0008) device sends START command with file data (file size in bytes).
{| class="wikitable"
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File Size (4 bytes)
| colspan="17" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Blank field (2 bytes)
|-
| colspan="12" |0x0001
| colspan="12" |0x0006
| colspan="12" |0x12345678
| colspan="17" |0x0000 (always same value)
|}

==Resume file transfer command (CMD_ID 0x0002)==
In a response to the START command a RESUME command must be sent from server.
{| class="wikitable"
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="7" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Packet offset (in bytes) (4 bytes)
|-
| colspan="11" |0x0002
| colspan="7" |0x0004
| colspan="12" |0x00000000
|}
To begin file transfer from the start, offset should be set to 0 (4 bytes value). In case when the file transfer was interrupted, to resume file transfer, offset can be set to the desired value (1 ≤ [offset (in bytes)] ≤ [file packets]).

==Synchronize file transfer command (CMD_ID 0x0003)==
In a response to the RESUME command SYNC command is sent from device.
{| class="wikitable"
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="8" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="9" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File offset (4 bytes)
|-
| colspan="11" |0x0003
| colspan="8" |0x0004
| colspan="9" |0x00000000
|}
By sending SYNC command it is ensured that next data command will contain file data starting from the specified offset.

==File data transfer command (CMD_ID 0x0004)==
After sending SYNC command file data transfer is started by sending DATA commands.
{| class="wikitable"
| colspan="9" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File data (up to 1024 bytes)
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data CRC (2 bytes)
|-
| colspan="9" |0x0004
| colspan="11" |0x0402
| colspan="14" |...
| colspan="11" |…
|}
File data is split into 1024-byte parts, each part wrapped into DATA command and sent.

''Note: if command with a bad CRC is received, RESUME command should be sent with last valid file offset, after receiving RESUME command, server will stop sending DATA commands and continue communication from “Resume file transfer command (CMD_ID 0x0002)” step.''

''CRC polynomial expression: '''0x8408'''''

''Initial value, when calculating CRC, is previously received packet (CMD ID 0x0004) CRC value.''

==File transfer status command (CMD_ID 0x0005)==
After file transfer is completed and no more files are required from device, server should send COMPLETED command to the device (this command doesn’t work after executing repeat init command 0x0009 – in this case the server should send close session 0x0000 command mentioned before).
{| class="wikitable"
| colspan="17" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Status (4 bytes)
|-
| colspan="17" |0x0005
| colspan="14" |0x0004
| colspan="12" |0x00000000
|}
In case of server using invalid arguments, commands or not following the file request flow, the device will send this command with Status field set to one of the few possible error codes. List of possible ones provided below.
{| class="wikitable"
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Status value (hexadecimal)
| colspan="20" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Description
| colspan="22" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Notes
|-
| colspan="11" |0x00000000
| colspan="20" |File transfer process completed
| colspan="22" |Sent from server
|-
| colspan="11" |0x00000002
| colspan="20" |Failed to close GPRS
| colspan="22" |Sent from device
|-
| colspan="11" |0x00000003
| colspan="20" |Failed to close socket
| colspan="22" |Sent from device
|-
| colspan="11" |0x00000005
| colspan="20" |Invalid response from server to init packet
| colspan="22" |Sent from device
|-
| colspan="11" |0x00000011
| colspan="20" |This error code forces the device to disconnect from server
| colspan="22" |Sent from device. Possible causes:
· „MDAS-9“ special ID (1039) is not active
· The requested file is not available by camera
|}
After COMPLETED command device should disconnect from the server.

==Initialization packet repeat command (CMD_ID 0x0009)==
When sent, the initialization packet is repeated. This is used, when all of the files are downloaded and additional check is carried out for any additional files, that may have been captured during the download operation.

==File transfer visual flow==
[[File:Flow.png|center|frameless|867x867px]]
[[Category: Teltonika ADAS]]

ADAS Communication Protocol

2025-07-21T05:17:28Z

Edgar.dementenko: /* Resume file transfer command (CMD_ID 0x0002) */

__TOC__

==Server side configuration source code==
'''NOTE: This is a "test server" version, dedicated for initial functionality testing (which could also be done via cloudview platform) with 1-2 cameras. Multithreaded (and multiple device) handling on the server side is up to the client to do additional development and/or necessary optimizations and modifications, to support more than 1-2 cameras at the same server instance.'''

Optionally - platforms that already support camera integrations could be used.

Together with the communication protocol, this server side source code can be downloaded and implemented upon personal servers for the ease of use and configuration, please see index.js, debug.js and protocol.js which can be copied into the server.

Server files & source code can be downloaded [https://drive.teltonika.lt/f/c9a94dd55d7d48bc81cd/?dl=1 here].

Please see index.js, debug.js and protocol.js files. These files contain required support for camera downloads and they can be inserted straight into server. The folder can also be run as server and will work with file downloads, so if personal server is not available, there is always a possibility to use this default server.

[[File:Server123.png|center]]

All that is required is an open Port on the computer and that port has to be written in run_server.bat file. Also by clicking on Readme file, you will be able to see the settings which you can enter into that run_server.bat file by right clicking the mouse button on it and choosing edit option. These settings include choices like DualCam download, ADAS file download or Auto mode, Metadata inclusion and etc.

[[File:Server edit.png|center]]

In this case, Notepad++ is chosen but you can choose any text editor in order to update the file.

==General command structure==
General communication packet structure is as in table below. It consists of CMD_ID (2 bytes), Data length of command and payload.
{| class="wikitable"
| colspan="18" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="17" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data
|-
| colspan="18" |2 bytes
| colspan="14" |2 bytes
| colspan="17" |[data length] bytes
|}

==Modified file transfer protocol==

'''Initialization packet'''
On connection, the device sends an initialization packet.
{| class="wikitable"
| colspan="15" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Header (0x0000)
| colspan="18" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Protocol ID
| colspan="10" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |IMEI
| colspan="13" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Settings
|-
| colspan="15" |2 bytes
| colspan="18" |2 bytes
| colspan="10" |8 bytes
| colspan="13" |4 bytes
|}
Protocol ID – just a reference for the protocol version that is running on device (for server cross compatibility with older versions).

Settings flag contains information on what is available for download. Structure provided:
{| class="wikitable"
| colspan="57" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Settings, 4 B
|-
| colspan="18" |Byte 3
| colspan="16" |Byte 2
| colspan="10" |Byte 1
| colspan="13" |Byte 0
|-
| colspan="2" |
| colspan="2" |
| colspan="3" |
| colspan="2" |
| colspan="3" |
| colspan="2" |
| colspan="2" |*
| colspan="2" |
| colspan="3" |
| colspan="3" |
| colspan="2" |
| colspan="2" |
|
|
| colspan="2" |
| colspan="2" |
|
| colspan="2" |
|
|
|
|
| colspan="2" |
|
| colspan="2" |
|
| colspan="3" |
|
|
| colspan="2" |
| colspan="2" |
|
|}

'''Close session command (CMD_ID 0x0000)'''
In case when device connects to the server, but server does not expect it to connect, server will respond by sending CLOSE command after which connection will be terminated. This command is also used then device connect to server for custom file sending and server finishes to send all custom files to device.
{| class="wikitable"
| colspan="20" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="13" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
|-
| colspan="20" |0x0000
| colspan="13" |0x0000
|}

==Request file path (CMD_ID 0x000C)==
First after connecting to server and seeing bit set in init packet the server should send file path request command.
{| class="wikitable"
!rowspan="1" style="width: 350px; background: #0054A6; color: white;"|Command ID
!rowspan="1" style="width: 350px; background: #0054A6; color: white;"|Data length
!rowspan="1" style="width: 350px; background: #0054A6; color: white;"|Blank field (2 bytes)
|-
|0x000C
|0x0002
|0x0000 (always same value)
|}

==File path response (CMD_ID 0x000D)==
This is a response to file path request (0x000C) command.
{| class="wikitable"
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="13" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Blank field (Variable)
|-
| colspan="14" |0x000D
| colspan="11" |1-512
| colspan="13" |<file path, or \0>
|}

==File request command (CMD_ID 0x0008)==
After device is connected for file upload server initiates file transfer by sending FILE REQ command.
{| class="wikitable"
| colspan="9" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="10" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="19" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File Identifier
|-
| colspan="9" |0x0008
| colspan="10" |2 bytes
| colspan="19" |File path has to be requested first via 0x000C command.
|}
Device should answer with START command described above indicating size and CRC of requested file.

==Start file transfer command (CMD_ID 0x0001)==
After device received file request command from server (0x0008) device sends START command with file data (file size in bytes).
{| class="wikitable"
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File Size (4 bytes)
| colspan="17" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Blank field (2 bytes)
|-
| colspan="12" |0x0001
| colspan="12" |0x0006
| colspan="12" |0x12345678
| colspan="17" |0x0000 (always same value)
|}

==Resume file transfer command (CMD_ID 0x0002)==
In a response to the START command a RESUME command must be sent from server.
{| class="wikitable"
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="7" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Packet bytes (4 bytes)
|-
| colspan="11" |0x0002
| colspan="7" |0x0004
| colspan="12" |0x00000000
|}
To begin file transfer from the start, offset should be set to 0 (4 bytes value). In case when the file transfer was interrupted, to resume file transfer, offset can be set to the desired value (1 ≤ [bytes] ≤ [file packets]).

==Synchronize file transfer command (CMD_ID 0x0003)==
In a response to the RESUME command SYNC command is sent from device.
{| class="wikitable"
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="8" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="9" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File offset (4 bytes)
|-
| colspan="11" |0x0003
| colspan="8" |0x0004
| colspan="9" |0x00000000
|}
By sending SYNC command it is ensured that next data command will contain file data starting from the specified offset.

==File data transfer command (CMD_ID 0x0004)==
After sending SYNC command file data transfer is started by sending DATA commands.
{| class="wikitable"
| colspan="9" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |File data (up to 1024 bytes)
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data CRC (2 bytes)
|-
| colspan="9" |0x0004
| colspan="11" |0x0402
| colspan="14" |...
| colspan="11" |…
|}
File data is split into 1024-byte parts, each part wrapped into DATA command and sent.

''Note: if command with a bad CRC is received, RESUME command should be sent with last valid file offset, after receiving RESUME command, server will stop sending DATA commands and continue communication from “Resume file transfer command (CMD_ID 0x0002)” step.''

''CRC polynomial expression: '''0x8408'''''

''Initial value, when calculating CRC, is previously received packet (CMD ID 0x0004) CRC value.''

==File transfer status command (CMD_ID 0x0005)==
After file transfer is completed and no more files are required from device, server should send COMPLETED command to the device (this command doesn’t work after executing repeat init command 0x0009 – in this case the server should send close session 0x0000 command mentioned before).
{| class="wikitable"
| colspan="17" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Command ID
| colspan="14" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Data length
| colspan="12" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Status (4 bytes)
|-
| colspan="17" |0x0005
| colspan="14" |0x0004
| colspan="12" |0x00000000
|}
In case of server using invalid arguments, commands or not following the file request flow, the device will send this command with Status field set to one of the few possible error codes. List of possible ones provided below.
{| class="wikitable"
| colspan="11" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Status value (hexadecimal)
| colspan="20" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Description
| colspan="22" rowspan="1" style="width: 350px; background: #0054A6; color: white;" |Notes
|-
| colspan="11" |0x00000000
| colspan="20" |File transfer process completed
| colspan="22" |Sent from server
|-
| colspan="11" |0x00000002
| colspan="20" |Failed to close GPRS
| colspan="22" |Sent from device
|-
| colspan="11" |0x00000003
| colspan="20" |Failed to close socket
| colspan="22" |Sent from device
|-
| colspan="11" |0x00000005
| colspan="20" |Invalid response from server to init packet
| colspan="22" |Sent from device
|-
| colspan="11" |0x00000011
| colspan="20" |This error code forces the device to disconnect from server
| colspan="22" |Sent from device. Possible causes:
· „MDAS-9“ special ID (1039) is not active
· The requested file is not available by camera
|}
After COMPLETED command device should disconnect from the server.

==Initialization packet repeat command (CMD_ID 0x0009)==
When sent, the initialization packet is repeated. This is used, when all of the files are downloaded and additional check is carried out for any additional files, that may have been captured during the download operation.

==File transfer visual flow==
[[File:Flow.png|center|frameless|867x867px]]
[[Category: Teltonika ADAS]]

DSM Firmware errata

2025-07-17T09:47:51Z

Edgar.dementenko:

__TOC__

===DSM Firmware Version===

We are always improving our device's performance, stability, and reliability. 
This document describes '''DSM platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMx6 device series==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DSM support for FMC650.
* '''NEW:''' Two camera support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.158''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-10-09}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Event timeout settings support via CFG

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.157''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DSM protocol update to 1.4 version
* Prevent modifying files after DSM Ready state is set
* IF file corrupted, DSM will return to ready state

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.156''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-05-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Increased event sound max value for voice setting
* Snapshot retransmit capability is added (periodic and by request)
* Prevent premature dsm state change from uploading to ready
* Reject unsolicited snapshot if upload buffer is full
* Multiple accsess to SD prevention
* Yawning sensitivity fixed value
* Increased UART buffer sizes
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.155''' (Latest firmware release version for {{{model|FMX640}}}) 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial firmware release
* Added DSM support
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DSM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.6.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Added the feature to make the snapshot of yawn on/off via FM
* Warning sounds fix

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.4.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Distraction Bus/Truck feature added
* Language error fixed(Spanish): Seat belt warning sound changed from English to Spanish
* Added features:
* Calibration timeout function
* Event processing starting from the second yawn event
* Added new snapshot and driver absence warning options

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-12-04}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* Seat belt detection update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.2.0.TR1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-08-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work
* New calibration page 30.0.0.1:18087
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.1'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issues related to SD retransmission function
* Fixed Timestamp values in UTC
* Fixed GPS coordinates changed to signed int
* Fixed Snapshot retransmission packet size
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''2.0.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-07}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
*stable DSM work
|-
|}

[[Category: DSM]]

ADAS Firmware errata

2025-07-17T09:46:55Z

Edgar.dementenko: /* Firmware download for FMX:125/225/640/FMC650 */

__TOC__

We are always improving our device's performance, stability, and reliability. 
This document describes '''ADAS platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMX:125/225/640/FMC650==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.105'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Video download improvements
* Overlay functions improvements
* Save to SD settings improvements
* Improve stable work

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.102'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* CRC calculation from a proper location not from a hardcoded Flash area
* Wrong server used with consecutive uploads
* Metadata request type changed for periodic snapshot
* Periodic image request by date instead of the current snapshot
* Fixed auto baud rate functionality unpausing scheduled jobs
* Prevent SD card access when downloading from MDAS
* Remount SD card when a disk error occurs
* Camera resolution configuration
* Default server\port in SMS requests
* Setting the overlay when it is disabled
* MDAS speed source selection
* Record sending with file details

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Crash in DDD files sending
* ADAS base update

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.10.Rev.103_ID1039'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Firmware for FMC640 and FMB640
* Base update to latest version
* Video/photo by request
* Periodic photo sending
|-
|}

==FMX125/FMX225 FIRMWARE VERSION==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX125/FMX225 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.1090'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update
* FIX: IO elements parameter ranges according to documentation
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-26 }}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version Meig Support
* Accessory monitoring port to MDAS9
* Firmware for FMX125 and FMX225 also for Meig
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-10-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version
* Minor configurator fixes
* Improved system stability and fixed general bugs
* Firmware for FMX125 and FMX225
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.242'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* FPW and FVSA bug fixes
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.240'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2020-10-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added ADAS camera support
* Initial release
|-
|}

==ADAS Firmware Version==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |ADAS FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.50'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [ADD] Spanish language
* [FIX] Speed from CAN
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.33'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [FIX] File transfer resume multiple presents for the same request
* [FIX] Packet index number in transfer resume CMD according to argument 2023.12.05
* [FIX] Packet index number in transfer resume
* [FIX] Video and snapshot transfer resume
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.15'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix Video and snapshot transfer resume
* Fix OSD ON/OFF functionality
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.10'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-14}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed malfunction of Lock Volume function
* Fix on vehicle file not applied properly via FMS command
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.03'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-22}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed miss usage of HEX values instead of DEC
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.01'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix where protocol version changed to 13 or 0x13
* Fix for wrong GPS coordinates offset
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.99'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-10}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video compression quality change via 0x7D
* Added file transfer resume via 0x9F
* Fixed abnormal packet communication during fw update
* Fixed speed value display on overlay
* Fixed option to use only FMx GPS data via 0x9C
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.95'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support 128 Gb SD card
* Video/photo by request
* Periodic photo sending
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.78'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Configurable video size supported
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.68'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-04-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Russian language added
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.12'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2019-07-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* LDW activation speed (mph) changed
|-

|}
[[Category: Teltonika ADAS]]

ADAS Firmware errata

2025-07-17T09:46:40Z

Edgar.dementenko:

__TOC__

We are always improving our device's performance, stability, and reliability. 
This document describes '''ADAS platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

=='''Firmware download for FMX:125/225/640/FMC650'''==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.105'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Video download improvements
* Overlay functions improvements
* Save to SD settings improvements
* Improve stable work

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.102'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* CRC calculation from a proper location not from a hardcoded Flash area
* Wrong server used with consecutive uploads
* Metadata request type changed for periodic snapshot
* Periodic image request by date instead of the current snapshot
* Fixed auto baud rate functionality unpausing scheduled jobs
* Prevent SD card access when downloading from MDAS
* Remount SD card when a disk error occurs
* Camera resolution configuration
* Default server\port in SMS requests
* Setting the overlay when it is disabled
* MDAS speed source selection
* Record sending with file details

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Crash in DDD files sending
* ADAS base update

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.10.Rev.103_ID1039'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Firmware for FMC640 and FMB640
* Base update to latest version
* Video/photo by request
* Periodic photo sending
|-
|}

==FMX125/FMX225 FIRMWARE VERSION==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX125/FMX225 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.1090'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update
* FIX: IO elements parameter ranges according to documentation
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-26 }}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version Meig Support
* Accessory monitoring port to MDAS9
* Firmware for FMX125 and FMX225 also for Meig
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-10-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version
* Minor configurator fixes
* Improved system stability and fixed general bugs
* Firmware for FMX125 and FMX225
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.242'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* FPW and FVSA bug fixes
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.240'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2020-10-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added ADAS camera support
* Initial release
|-
|}

==ADAS Firmware Version==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |ADAS FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.50'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [ADD] Spanish language
* [FIX] Speed from CAN
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.33'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [FIX] File transfer resume multiple presents for the same request
* [FIX] Packet index number in transfer resume CMD according to argument 2023.12.05
* [FIX] Packet index number in transfer resume
* [FIX] Video and snapshot transfer resume
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.15'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix Video and snapshot transfer resume
* Fix OSD ON/OFF functionality
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.10'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-14}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed malfunction of Lock Volume function
* Fix on vehicle file not applied properly via FMS command
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.03'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-22}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed miss usage of HEX values instead of DEC
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.01'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix where protocol version changed to 13 or 0x13
* Fix for wrong GPS coordinates offset
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.99'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-10}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video compression quality change via 0x7D
* Added file transfer resume via 0x9F
* Fixed abnormal packet communication during fw update
* Fixed speed value display on overlay
* Fixed option to use only FMx GPS data via 0x9C
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.95'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support 128 Gb SD card
* Video/photo by request
* Periodic photo sending
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.78'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Configurable video size supported
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.68'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-04-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Russian language added
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.12'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2019-07-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* LDW activation speed (mph) changed
|-

|}
[[Category: Teltonika ADAS]]

ADAS Firmware errata

2025-07-17T09:46:17Z

Edgar.dementenko:

__TOC__

We are always improving our device's performance, stability, and reliability. 
This document describes '''ADAS platform''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

'''Firmware download for FMX:125/225/640/FMC650'''

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
|}

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX640 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.105'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Video download improvements
* Overlay functions improvements
* Save to SD settings improvements
* Improve stable work

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.102'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-13}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* CRC calculation from a proper location not from a hardcoded Flash area
* Wrong server used with consecutive uploads
* Metadata request type changed for periodic snapshot
* Periodic image request by date instead of the current snapshot
* Fixed auto baud rate functionality unpausing scheduled jobs
* Prevent SD card access when downloading from MDAS
* Remount SD card when a disk error occurs
* Camera resolution configuration
* Default server\port in SMS requests
* Setting the overlay when it is disabled
* MDAS speed source selection
* Record sending with file details

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.22.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Crash in DDD files sending
* ADAS base update

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''01.02.10.Rev.103_ID1039'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Firmware for FMC640 and FMB640
* Base update to latest version
* Video/photo by request
* Periodic photo sending
|-
|}

==FMX125/FMX225 FIRMWARE VERSION==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FMX125/FMX225 FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.1090'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update
* FIX: IO elements parameter ranges according to documentation
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-26 }}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version Meig Support
* Accessory monitoring port to MDAS9
* Firmware for FMX125 and FMX225 also for Meig
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.370'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-10-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Base update to latest version
* Minor configurator fixes
* Improved system stability and fixed general bugs
* Firmware for FMX125 and FMX225
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.242'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* FPW and FVSA bug fixes
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.01.Rev.240'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2020-10-26}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added ADAS camera support
* Initial release
|-
|}

==ADAS Firmware Version==

{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |ADAS FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.50'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-03-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [ADD] Spanish language
* [FIX] Speed from CAN
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.33'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* [FIX] File transfer resume multiple presents for the same request
* [FIX] Packet index number in transfer resume CMD according to argument 2023.12.05
* [FIX] Packet index number in transfer resume
* [FIX] Video and snapshot transfer resume
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.15'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix Video and snapshot transfer resume
* Fix OSD ON/OFF functionality
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.10'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-10-14}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed malfunction of Lock Volume function
* Fix on vehicle file not applied properly via FMS command
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.03'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-22}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed miss usage of HEX values instead of DEC
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.6.01'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fix where protocol version changed to 13 or 0x13
* Fix for wrong GPS coordinates offset
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.99'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-07-10}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video compression quality change via 0x7D
* Added file transfer resume via 0x9F
* Fixed abnormal packet communication during fw update
* Fixed speed value display on overlay
* Fixed option to use only FMx GPS data via 0x9C
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.95'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support 128 Gb SD card
* Video/photo by request
* Periodic photo sending
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.78'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-21}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Configurable video size supported
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.68'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-04-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Russian language added
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''0.5.12'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2019-07-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* LDW activation speed (mph) changed
|-

|}
[[Category: Teltonika ADAS]]

DashCam Firmware errata

2025-07-17T09:45:51Z

Edgar.dementenko: /* Firmware download for FMX125/FMX225/FMC650 */

__TOC__

==Firmware Version==

We are always improving our device's performance, stability, and reliability. 
This document describes '''Dashcamplatform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMX125/FMX225/FMC650==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work with DualCam/DashCam.
* '''NEW:''' Two camera support.
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.112'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-11-23}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DualCam/DashCam support for FMC650.
|-
|}

==Firmware for FMC125==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.371'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* NEW: QT and MEIG modem support
* Network stability improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.534'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* Port stability related changes
* Metadata version 4 support for DualCam and DashCam
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.531'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-02-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.663'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-07-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Network stability improvements.
|-

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.662'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DashCam accessory-monitoring feature
* DashCam support added.
* DualCam capture buffer loop
|-
|}

==Firmware for DashCam ==
{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DashCam FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-05-20}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added watch dog for camera to restart it self if camera will stuck
|-
|}

[[Category:Teltonika DashCam]]

DualCam Firmware errata

2025-07-17T09:45:27Z

Edgar.dementenko: /* Firmware download for FMC125/FMC225/FMC650 */

__TOC__

==Firmware Version==

We are always improving our device's performance, stability, and reliability. 
This document describes '''DualCAM platform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
(E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=)
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMC125/FMC225/FMC650==

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work with DualCam/DashCam.
* '''NEW:''' Two camera support.
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.112'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-11-23}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DualCam/DashCam support for FMC650.
|-
|}

==Firmware for FMC125==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.371'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* NEW: QT and MEIG modem support
* Network stability improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.534'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* Port stability related changes
* Metadata version 4 support for DualCam and DashCam
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.531'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-02-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.663'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-07-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Network stability improvements.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.662'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DualCam capture buffer loop
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.661'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-27}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Only one video download with video priority selected
* Camera state check logic fixed
* DualCam time zone in metadata changed to Unix time (UTC+0)
* Option to select file priority for Dual Cam
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.367'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-11-29}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Metadata duplicate
* Gnss sync issues. Mrg of 03.27.13.Rev.441 meig branch
* Metadata overwritten when 2 or more files queued for upload
* Timestamp drift after long time period in deep sleep
* MEIG modem throws errors and callstacks under heavy load
* SMS request response when video buffer is empty
* Periodic image buffer issues in deep sleep
* MEIG GPRS quality update
* Video buffer stuck after wrong timestamp
* Modem unstable at full DualCam buffer
* Camreq identical metadata issue
* DualCam video trigger max value
* DualCam custom image resolution
* DualCam fw version not available in logs
* SD card format response issue

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.362'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* NITZ gives unstable time
* Single side of camera footage is uploaded
* MEIG modem file upload issue
* DualCam base update for MEIG support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.365'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-03-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Minor improvements
* DualCam metadata timestamp mismatch
* Increased timeout for video data pack request
* CRC calculation mismatch after file upload resume
* Periodic image sending
* Add camera time zone parameter
* Added periodic time check and sync for the camera
* Adjusted DualCam command timeouts
* Added fixes and workarounds for cam command fails
* FPS parameter added to the meta data command
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.361'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-09-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.360'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-08-30}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Extended video and image sending configuration
* Added Domain and Port parameters to “camreq” command
* Extended “camreq” response
* Added “camgetver” command
* Fixed timestamp for video meta data
* Improved system stability and fixed general bugs
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.03.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-06-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added image sending trigger
* Ability to configure multiple video triggers
* Always enabled DualCam scenario support
* Improved system stability and fixed general bugs
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.00.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-02-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial release
|-
|}

==Firmware for DualCam ==
{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DUALCAM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-05-20}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added watch dog for camera to restart it self if camera will stuck
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.2'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video buffer pool,repair the write rate of the SD card
* Solved the bug when 35min can not download video
* Changed the logic of FPS setting and switching,the video saves the exact FPS of each video packet in the PTM_FRAME
* Improved the picture and video quality,image edge trimming
* Added flash upgrade mode
* Modified command to get Image quality
* Resolved the problem that the camera restarts after switching the OSD switch
* Optimized setting video frame rate without restarting the camera
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Improved stability and fixes of camera data packets
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.2'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-06-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issue with front camera crash if picture size is too large
* Added command to check the camera version
* Improved system stability and fixed general bugs
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021- 02-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial release
|-
|}

[[Category:Teltonika DualCam]]

DSM Calibration

2025-07-11T08:25:56Z

Edgar.dementenko: /* Calibration Setup */

==PC Calibration==
Driver Setup (ONLY SUPPORTS WINDOWS OS)
* If connecting the DSM camera to computer, the calibration page is not available, please follow the steps below:
* Please install RNDIS driver. LINK: http://movon.co.kr/downloads/rndisdriver.zip (Windows 10)
* If the driver does not install itself automatically, please follow the guide in this document [[Media:DSM RNDIS driver installation.pdf| here]]
* Unzip the file and remember the unzipped folder location.

[[File:DSM_Calib.png | right | 320x320px]]
==== Calibration Setup ====
* Access DSM Calibration page via PC
** Connect DSM to PC using USB Type-C cable with 5 pins.
** Power on DSM. If you hear repeated beep sound, this means DSM is properly connected to computer.
** Activate the browser and enter into'''http://30.0.0.1:18087/''' to access DSM calibration page. Google Chrome is recommended.
** If you see the page below, please select language you want and sign in using following information
‐ ID: admin ‐ Password: 1234
==== Calibration ====
* Select Speed Type
** GPS Speed setting - GPS antenna is embedded on DSM. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.

[[File:DSM Calib2.png|400px|center-left]] [[File:DSM Calib3.png|400px|center-right]]

==== CAN Speed setting ====
*DSM can get speed through CAN as well.
*DSM only recognizes encrypted CAN data from our Database site; http://info.mdas.co.kr

Please download can file from the DB and upload to system.

[[File:Mdas1.0.png|frameless|450x450px]]

==== Verify Speed Signal ====
You can check the speed data is coming correct by test drive.

If there is a deviation, please use the following correction method.

Please click the “Correction” button when you drive at 40km/h (24mph). Then, DSM will set new speed automatically.
[[File:Mdas1.1.png|450x450px]]

==== Camera Setting ====

# Calibrate camera, that face will be in center of the image in calibration page.
# After that, just go to the next step.

==== DSM Setup ====
The camera can also be configured through its configuration, main settings that can be seen are pointed out below:

[[File:Dms1.03.png]]

Configurable parameters:

*ON/OFF: Enable Drowsiness, Distraction, Phone, Smoking, Yawning.
*Sound Type: Check the warning sound and select the one you prefer. Press Play button to test Warning Alarm Sound.
*Vibrator: Enable vibration function. (On / Off)
*Sensitivity: Set the sensitivity on a scale of 1 to 3. As the level gets higher, it gets more sensitive. Yawning warning will generate when yawning for 2 seconds.
*Activation Speed:
# You can set up activation speed by DSM alert respectively.
# Set the Activation Speed ( 15 ~ 60Km/h ≒ 10 ~ 40mph). The functions will be activated when the vehicle is faster than this speed.
# If you select Others, you can input the activation speed in the below box. Note that the input range is between 5Km and 100km.
* DIP switch on unit: Enable DIP switch on DSM’s unit.
* Sound Level: Control the warning sound level on a scale of 1 to 4.
* Test Mode : If you want to test DSM at any speed, please select “ON” ⑨ Time-out Feature: Select if apply below time-out logic. (On / Off) * Time-out feature: An event and chime will be fired when ‘First Trigger Count’ number of triggers happen within ‘First Trigger Interval’. After the first event and chine, additional events chimes up to ‘Max Trigger Count’ will be fired as long as they happen within ‘Max Trigger Interval’. When ‘First Trigger Interval’ or ‘Max Trigger Interval’ expire, the trigger count it reset to 0.

==== Miscellaneous Settings ====
In the miscellaneous settings, a few important parameters should be configured, to ensure, the correct DSM is working. Please make sure, that You've selected the correct baudrate — 115200 in the FMS RS232 Baudrate field. This setting is necessary for correct DSM and FMx64 working.

[[File:Dms misc settings.png| 500x500px]]

Other parameters can be configured as well, but these settings can be adjusted from the FMx64 device.

==== Driver Registration ====
Face ID or driver registration is required in order for the camera to recognize different drivers. In the DSM menu, click on "Driver Registration" and follow the steps below in order to calibrate the camera angle:

Look into the camera and click "next" once you have the distance and angle set accordingly.

Once this is done, name the photo with the driver's ID or name and keep the document uploaded inside DSM.

DSM Calibration

2025-07-11T08:25:22Z

Edgar.dementenko: /* Calibration Setup */

==PC Calibration==
Driver Setup (ONLY SUPPORTS WINDOWS OS)
* If connecting the DSM camera to computer, the calibration page is not available, please follow the steps below:
* Please install RNDIS driver. LINK: http://movon.co.kr/downloads/rndisdriver.zip (Windows 10)
* If the driver does not install itself automatically, please follow the guide in this document [[Media:DSM RNDIS driver installation.pdf| here]]
* Unzip the file and remember the unzipped folder location.

[[File:DSM_Calib.png | right | 320x320px]]
==== Calibration Setup ====
* Access DSM Calibration page via PC
** Connect DSM to PC using USB Type-C cable with 5 pins.
** Power on DSM. If you hear repeated beep sound, this means DSM is properly connected to computer.
** Activate the browser and enter into'''http://30.0.0.1:18087/''' to access DSM calibration page. Google Chrome is recommended.
** If you see the page below, please select language you want and sign in using following information
‐ ID: admin ‐ Password: 1234
'''Please NOTE: Starting from August 31, 2023, we are confirming the release of new firmware. As a result, you will be able to receive the DSM with the updated firmware. If you have followed all the necessary steps before and have not accessed the calibration page http://20.0.0.1:18087/, you will need to use this web page: http://30.0.0.1:18087/ '''

==== Calibration ====
* Select Speed Type
** GPS Speed setting - GPS antenna is embedded on DSM. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.

[[File:DSM Calib2.png|400px|center-left]] [[File:DSM Calib3.png|400px|center-right]]

==== CAN Speed setting ====
*DSM can get speed through CAN as well.
*DSM only recognizes encrypted CAN data from our Database site; http://info.mdas.co.kr

Please download can file from the DB and upload to system.

[[File:Mdas1.0.png|frameless|450x450px]]

==== Verify Speed Signal ====
You can check the speed data is coming correct by test drive.

If there is a deviation, please use the following correction method.

Please click the “Correction” button when you drive at 40km/h (24mph). Then, DSM will set new speed automatically.
[[File:Mdas1.1.png|450x450px]]

==== Camera Setting ====

# Calibrate camera, that face will be in center of the image in calibration page.
# After that, just go to the next step.

==== DSM Setup ====
The camera can also be configured through its configuration, main settings that can be seen are pointed out below:

[[File:Dms1.03.png]]

Configurable parameters:

*ON/OFF: Enable Drowsiness, Distraction, Phone, Smoking, Yawning.
*Sound Type: Check the warning sound and select the one you prefer. Press Play button to test Warning Alarm Sound.
*Vibrator: Enable vibration function. (On / Off)
*Sensitivity: Set the sensitivity on a scale of 1 to 3. As the level gets higher, it gets more sensitive. Yawning warning will generate when yawning for 2 seconds.
*Activation Speed:
# You can set up activation speed by DSM alert respectively.
# Set the Activation Speed ( 15 ~ 60Km/h ≒ 10 ~ 40mph). The functions will be activated when the vehicle is faster than this speed.
# If you select Others, you can input the activation speed in the below box. Note that the input range is between 5Km and 100km.
* DIP switch on unit: Enable DIP switch on DSM’s unit.
* Sound Level: Control the warning sound level on a scale of 1 to 4.
* Test Mode : If you want to test DSM at any speed, please select “ON” ⑨ Time-out Feature: Select if apply below time-out logic. (On / Off) * Time-out feature: An event and chime will be fired when ‘First Trigger Count’ number of triggers happen within ‘First Trigger Interval’. After the first event and chine, additional events chimes up to ‘Max Trigger Count’ will be fired as long as they happen within ‘Max Trigger Interval’. When ‘First Trigger Interval’ or ‘Max Trigger Interval’ expire, the trigger count it reset to 0.

==== Miscellaneous Settings ====
In the miscellaneous settings, a few important parameters should be configured, to ensure, the correct DSM is working. Please make sure, that You've selected the correct baudrate — 115200 in the FMS RS232 Baudrate field. This setting is necessary for correct DSM and FMx64 working.

[[File:Dms misc settings.png| 500x500px]]

Other parameters can be configured as well, but these settings can be adjusted from the FMx64 device.

==== Driver Registration ====
Face ID or driver registration is required in order for the camera to recognize different drivers. In the DSM menu, click on "Driver Registration" and follow the steps below in order to calibrate the camera angle:

Look into the camera and click "next" once you have the distance and angle set accordingly.

Once this is done, name the photo with the driver's ID or name and keep the document uploaded inside DSM.

DSM

2025-07-10T07:14:30Z

Edgar.dementenko: /* Downloads */

'''DSM (D'''river '''S'''afety and '''M'''onitoring solution). This product with Deep-Learning technology can support drowsiness, distraction and yawning attention warnings as well as periodic event data and picture footage transfer.

'''We would like to introduce our new solution, allowing the possibility to connect two cameras, DSM and DashCam or DualCam, to one device, FMC650'''. By utilizing the two RS232 ports on the FMC650, you can connect the DSM camera for driver status monitoring to one port and the DualCam or DashCam camera for road and cargo monitoring to the second port. '''[https://wiki.teltonika-gps.com/view/DSM_Configuration#Connecting_two_cameras_simultaneously_for_FMx650 Configuration]'''

'''NOTE. For connection to FMC650 device, cable is included in the box.'''

[[File:Mdsm22 106.png|370x320px|right]]

*[[DSM_First_Start | First Start]]
*[[DSM_Camera_Manual | Camera Manual]]
*[[DSM Calibration]]
*[[DSM Configuration]]
*[[DSM Communication Protocol]]
*[[DSM Data Sending Parameters ID]]
*[[DSM SMS commands]]
*[[DSM Certifications & Approvals]]
*[[DSM Firmware errata]]
*[[DSM Firmware and Drivers update]]
*[[DSM Nomenclature, classification codes]]
*[[DSM FAQ]]
*[[DSM EAN]]
*[[DSM Testing Guide]]
*[[DSM Integration on platfroms]]
*[[CloudView Platform]]
==Downloads==
'''Manual & Documentation''' 

[[File:pdf_icon.png|32px|link=]]
[[Media:DSM datasheet v1.3.pdf|DSM Datasheet (EN)]]
(Updated on: 2025-07-09)

==Additional information==

[https://teltonika-gps.com/products/accessories/video-telematics/teltonika-dsm Teltonika DSM]

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

[[Category: Video Solutions]]

File:DSM datasheet v1.3.pdf

2025-07-10T07:14:10Z

Edgar.dementenko:

Teltonika ADAS

2025-07-10T07:13:03Z

Edgar.dementenko: /* Downloads */

The '''ADAS''' is an advanced driver safety system designed to save lives, increase awareness of bad driving habits & record driving statistics (with video) for fleet management users and conventional drivers alike.
Together with '''Teltonika's FMX6''' trackers, all collected information including '''ADAS IO''' and can be forwarded to the server of choice even the video and photo requests or even event triggers which can occur when accidents happen. This installation manual highlights the most important information required and assumes an experienced installer uses common industry practices for a successful integration.

'''Teltonika's FMX125 & FMX225''' supports '''ADAS IO''' information '''ONLY, image and video requests are not supported''' for '''FMX125 & FMX225'''. Please also note when ordering, ADAS cameras that start with S/N numbers of 9B are integrated to work with FMX125/225 while devices that start with S/N numbers of 9C will only work with FMX6. In the event you receive a camera with a Serial Number starting with "9B," it is crucial to check for a red circle sticker on the camera. The presence of this red sticker indicates that the camera, despite its "9B" Serial Number, is actually compatible with FMX6 devices, functioning equivalently to cameras with a "9C" Serial Number. This is due to the serial numbers being pre-attached to the camera case by the manufacturer and remaining constant for warranty purposes. If your camera with a "9B" Serial Number has this red sticker, proceed to connect it to a computer, install the required drivers, and visit IP 10.0.0.1 in a browser. Here, you will find more details about the camera, which will confirm its compatibility with FMX6 devices, as the actual Serial Number displayed will start with "9C.

'''NOTE. For connection to FMC650 device, cable is included in the box.'''

[[File:MDAS-9_2.jpg|alt=|right|500x500px]]

*[[ADAS_First_Start | First Start]]
*[[Indicator Display Icons]]
*[[ADAS_Camera_Manual | Camera Manual]]
*[[ADAS Configuration]]
*[[ADAS Communication Protocol]]
*[[ADAS Data Sending Parameters ID]]
*[[ADAS SMS commands]]
*[[ADAS Certifications & Approvals]]
*[[ADAS Troubleshoot]]
*[[ADAS Firmware errata]]
*[[ADAS FAQ]]
*[[ADAS Integration on platfroms]]
*[[ADAS Nomenclature, classification codes]]
*[[ADAS EAN]]
*[[ADAS Testing guide]]
*[[CloudView Platform]]
==Downloads==
'''Manual & Documentation''' 

{|
|[[File:pdf_icon.png|32px|link=]]
|[[Media:ADAS datasheet v1.1.pdf|ADAS Datasheet (EN)]]
|(Updated on: {{{datasheet_date|2025-07-09}}})
|-
|}

==Additional information==

https://teltonika-gps.com/lt/product/adas/

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

==ADAS video presentation==
<youtube>https://www.youtube.com/watch?v=mXfH5ii93vI</youtube> 

[[Category:Video Solutions]]

Teltonika ADAS

2025-07-10T07:12:34Z

Edgar.dementenko: /* Downloads */

The '''ADAS''' is an advanced driver safety system designed to save lives, increase awareness of bad driving habits & record driving statistics (with video) for fleet management users and conventional drivers alike.
Together with '''Teltonika's FMX6''' trackers, all collected information including '''ADAS IO''' and can be forwarded to the server of choice even the video and photo requests or even event triggers which can occur when accidents happen. This installation manual highlights the most important information required and assumes an experienced installer uses common industry practices for a successful integration.

'''Teltonika's FMX125 & FMX225''' supports '''ADAS IO''' information '''ONLY, image and video requests are not supported''' for '''FMX125 & FMX225'''. Please also note when ordering, ADAS cameras that start with S/N numbers of 9B are integrated to work with FMX125/225 while devices that start with S/N numbers of 9C will only work with FMX6. In the event you receive a camera with a Serial Number starting with "9B," it is crucial to check for a red circle sticker on the camera. The presence of this red sticker indicates that the camera, despite its "9B" Serial Number, is actually compatible with FMX6 devices, functioning equivalently to cameras with a "9C" Serial Number. This is due to the serial numbers being pre-attached to the camera case by the manufacturer and remaining constant for warranty purposes. If your camera with a "9B" Serial Number has this red sticker, proceed to connect it to a computer, install the required drivers, and visit IP 10.0.0.1 in a browser. Here, you will find more details about the camera, which will confirm its compatibility with FMX6 devices, as the actual Serial Number displayed will start with "9C.

'''NOTE. For connection to FMC650 device, cable is included in the box.'''

[[File:MDAS-9_2.jpg|alt=|right|500x500px]]

*[[ADAS_First_Start | First Start]]
*[[Indicator Display Icons]]
*[[ADAS_Camera_Manual | Camera Manual]]
*[[ADAS Configuration]]
*[[ADAS Communication Protocol]]
*[[ADAS Data Sending Parameters ID]]
*[[ADAS SMS commands]]
*[[ADAS Certifications & Approvals]]
*[[ADAS Troubleshoot]]
*[[ADAS Firmware errata]]
*[[ADAS FAQ]]
*[[ADAS Integration on platfroms]]
*[[ADAS Nomenclature, classification codes]]
*[[ADAS EAN]]
*[[ADAS Testing guide]]
*[[CloudView Platform]]
==Downloads==
'''Manual & Documentation''' 

{|
|[[File:pdf_icon.png|32px|link=]]
|[[Media:ADAS datasheet v1.1.pdf|thumb]]
|ADAS Datasheet (EN)]]
|(Updated on: {{{datasheet_date|2025-07-09}}})
|-
|}

==Additional information==

https://teltonika-gps.com/lt/product/adas/

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

==ADAS video presentation==
<youtube>https://www.youtube.com/watch?v=mXfH5ii93vI</youtube> 

[[Category:Video Solutions]]

File:ADAS datasheet v1.1.pdf

2025-07-10T07:12:02Z

Edgar.dementenko:

DashCam Camera Manual

2025-07-10T06:52:50Z

Edgar.dementenko: /* DashCam data transfer timing */

__TOC__
==Package contents==
[[File:Dashcamparts.jpg|frameless|alt=|left|347x347px]]

There are several components included in the DashCam package box. These components are necessary to set up the camera and make it functional part of the vehicle.
 
'''1. Teltonika DashCam''' - the main camera unit used to record video/pictures. This unit has cable attached to it for connection purposes e.g. powering up and data transmission.
'''2. Sticky Tape 3M''' - option no. 1, a double sided sticky tape that can be used to stick the camera unit to the windscreen, this will allow it to be taken off later on without traces.
'''3. Screws''' - option no. 2, screws which can be used to screw the camera unit into the designated place just above the windscreen (should not be used on windows).

==Important Set-up links==
1. [[DashCam_First Start|'''First Start''']] - in this section it is described how to set up the camera before first use. It is essential to know the process as without certain set-up processes the camera will not start or certain functions will not be accessible.

2. [[DashCam Configuration|'''DashCam Configuration''']] - this section describes the navigational way inside of the configurator which will be the main tool to set up the camera with the tracking device and make it functional.

3. [[DashCam Communication Protocol|'''DashCam Communication Protocol''']] - is used when setting up file upload to servers for quick downloading of data. It is essential part and functionality of the FMX tracking devices family which allows the users to upload data and files from the device effortlessly.

4. [[DashCam SMS commands|'''DashCam SMS commands''']] - in this section there are SMS sending commands which will help the user by providing easier access to command the device, or request information from it.

5. [[DashCam Firmware errata|'''DashCam Firmware errata''']] - every once in a while an update comes out which improves the functionalities of the DashCam systems and even introduces new ones. It is important to keep track of what is released in order to receive the most out of your DashCam solution.

6. [[DashCam FAQ|'''DashCam FAQ''']] - sometimes there will be rising questions to which the answers can not always be found. So a FAQ page has been released in order to collect non-standard information and potentially solve issues that the client might be facing.

==Product Specification==
<table class="nd-othertables" style="width: 73%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Technical data</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Supported by</td>
<td style="width: 8%; text-align:left">FMC125, FMC225, FMC650</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Day </td>
<td style="width: 8%; text-align:left">Day (Color) </td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Angle of View</td>
<td style="width: 8%; text-align:left">Horizontal 120°, Vertical 70°</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">DashCam</td>
<td style="width: 8%; text-align:left">Front (equal characteristics)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera casing dimensions</td>
<td style="width: 8%; text-align:left">126.2 x 36.6 x 36.6 mm</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera mounting</td>
<td style="width: 8%; text-align:left">Sticky tape (3M) or screws</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Supported microSD card sizes</td>
<td style="width: 8%; text-align:left">16 GB, 32 GB, 64 GB, 128 GB</td>
</tr>

<td style="width: 8%; text-align:left">Microphone</td>
<td style="width: 8%; text-align:left">Voice recording (Not installed in standard modification. Can be added on demand)</td>
</tr>
<tr></table>
 
<table class="nd-othertables" style="width: 73%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Electrical parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Input voltage range</td>
<td style="width: 8%; text-align:left">9 ~ 36 V</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Working temperature and humidity</td>
<td style="width: 8%; text-align:left">Temperature: -30 °C ~ 85 °C
Humidity: <90%
</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Power consumption</td>
<td style="width: 8%; text-align:left">80 mA</td>
</tr>
<tr></table>
 
<table class="nd-othertables" style="width: 68%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Function parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Real time clock (RTC) synchronization</td>
<td style="width: 8%; text-align:left">Available over FM (via NTP, NITZ or GNSS)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Picture resolution</td>
<td style="width: 8%; text-align:left">1280 x 720 (default) , Configurable: 160 x 120; 320 x 240; 640 x 480; 1920 x 1080</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Cable length</td>
<td style="width: 8%; text-align:left">RS232 (3.5 m)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video compression</td>
<td style="width: 8%; text-align:left">H.265</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video resolution</td>
<td style="width: 8%; text-align:left">720P </td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video storage</td>
<td style="width: 8%; text-align:left">1psc. MicroSD card (Max 128GB up to 72 hours of video)</td>
</tr>
</table>

== DashCam data transfer timing ==

{| class="wikitable"
|+
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image resolution'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image compression (%)*'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Video duration (s)'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of image'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of video'''
FMC125 4G
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Time interval (s) from trigger to files received on server
FMC125 4G
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Photo examples'''
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Image
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |136KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |21s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |23KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |7KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |3s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 100 com.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |350KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |53s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |53KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |17KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 100 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |764KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |121s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1920x1080 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |17s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1980x1080 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |37KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |7s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1920x1080 100 comp.jpeg|thumb]]
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Video
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5 front
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 570KB, h265-495KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |76s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:480865 Dualcam apkirptas.mp4]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10 front
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 1140KB, h265-990KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |151s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |15 front
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 1710KB, h265-1485KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |227s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |30 front
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 3420KB, h265-2970KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |453s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|}

'''* NOTE:''' This approximate time which we receive during testing in real cases can be different.

'''* NOTE''' Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.

[[Category:Teltonika DashCam]]

Camera Manual

2025-07-10T06:49:35Z

Edgar.dementenko: /* DualCam data transfer timing */

__TOC__
==Package contents==
[[File:2022_07_14_08_41_38_Window.jpg|frameless|alt=|left|350x350px]]

There are several components included in the DualCam package box. These components are necessary to set up the camera and make it functional part of the vehicle.
 
'''1. Teltonika DualCam''' - the main camera unit used to record video/pictures. This unit has cable attached to it for connection purposes e.g. powering up and data transmission.
'''2. Sticky Tape 3M''' - option no. 1, a double sided sticky tape that can be used to stick the camera unit to the windscreen, this will allow it to be taken off later on without traces.
'''3. Screws''' - option no. 2, screws which can be used to screw the camera unit into the designated place just above the windscreen (should not be used on windows).

==Important Set-up links==
1. [[First Start|'''First Start''']] - in this section it is described how to set up the camera before first use. It is essential to know the process as without certain set-up processes the camera will not start or certain functions will not be accessible.

2. [[DualCam Configuration|'''DualCam Configuration''']] - this section describes the navigational way inside of the configurator which will be the main tool to set up the camera with the tracking device and make it functional.

3. [[DualCam Communication Protocol|'''DualCam Communication Protocol''']] - is used when setting up file upload to servers for quick downloading of data. It is essential part and functionality of the FMX tracking devices family which allows the users to upload data and files from the device effortlessly.

4. [[DualCam SMS commands|'''DualCam SMS commands''']] - in this section there are SMS sending commands which will help the user by providing easier access to command the device, or request information from it.

5. [[DualCam Firmware errata|'''DualCam Firmware errata''']] - every once in a while an update comes out which improves the functionalities of the DualCam systems and even introduces new ones. It is important to keep track of what is released in order to receive the most out of your DualCam solution.

6. [[DualCam FAQ|'''DualCam FAQ''']] - sometimes there will be rising questions to which the answers can not always be found. So a FAQ page has been released in order to collect non-standard information and potentially solve issues that the client might be facing.

==Product Specification==
<table class="nd-othertables" style="width: 73%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Technical data</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Supported by</td>
<td style="width: 8%; text-align:left">FMC125, FMC225, FMC650</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Day & Night Vision Effect</td>
<td style="width: 8%; text-align:left">Day (Color), Night (Black & White)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Angle of View</td>
<td style="width: 8%; text-align:left">Horizontal 120°, Vertical 70°</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Dual Camera</td>
<td style="width: 8%; text-align:left">Front and Rear (equal characteristics)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera casing dimensions</td>
<td style="width: 8%; text-align:left">126.2 x 36.6 x 36.6 mm</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera mounting</td>
<td style="width: 8%; text-align:left">Sticky tape (3M) or screws</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Supported microSD card sizes</td>
<td style="width: 8%; text-align:left">16 GB, 32 GB, 64 GB</td>
</tr>

<td style="width: 8%; text-align:left">Microphone</td>
<td style="width: 8%; text-align:left">Voice recording (Not installed in standard modification. Can be added on demand)</td>
</tr>
<tr></table>
 
<table class="nd-othertables" style="width: 73%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Electrical parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Input voltage range</td>
<td style="width: 8%; text-align:left">9 ~ 36 V</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Working temperature and humidity</td>
<td style="width: 8%; text-align:left">Temperature: -30 °C ~ 85 °C
Humidity: <90%
</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Power consumption</td>
<td style="width: 8%; text-align:left">220 mA</td>
</tr>
<tr></table>
 
<table class="nd-othertables" style="width: 68%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Function parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Real time clock (RTC) synchronization</td>
<td style="width: 8%; text-align:left">Available over FM (via NTP, NITZ or GNSS)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Picture resolution</td>
<td style="width: 8%; text-align:left">1280 x 720 (default) Configurable: 160 x 120; 320 x 240; 640 x 480; 1920 x 1080</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">IR Distance</td>
<td style="width: 8%; text-align:left">2 Meters</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Cable length</td>
<td style="width: 8%; text-align:left">RS232 (3.5 m)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video compression</td>
<td style="width: 8%; text-align:left">H.265</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video resolution</td>
<td style="width: 8%; text-align:left">720P </td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video storage</td>
<td style="width: 8%; text-align:left">2psc. MicroSD card (Max 64GB up to 40 hours of video)</td>
</tr>
</table>

== DualCam data transfer timing ==

{| class="wikitable"
|+
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image resolution'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image compression (%)*'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Video duration (s)'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of image'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of video'''
FMC125 4G
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Time interval (s) from trigger to files received on server
FMC125 4G
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Photo examples'''
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Image
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |136KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |21s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |23KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |640x480
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |7KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |3s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x480 100 com.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |350KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |53s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |53KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |17KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x720 100 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |764KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |121s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1920x1080 0 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |50
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |17s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1980x1080 50 comp.jpeg|thumb]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1920x1080
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |100
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |37KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |7s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1920x1080 100 comp.jpeg|thumb]]
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Video
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 570KB, h265-495KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |76s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:480865 Dualcam apkirptas.mp4]]
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |5+5 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 540KB, h265-222KB Front mp4 - 516KB, h265 - 390KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |122s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 1140KB, h265-990KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |151s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |10+10 (both)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 1092KB, h265-444KB Front mp4 - 1032KB, h265 - 781KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |244s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |15 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 1710KB, h265-1485KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |227s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |15+15 (both)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 1639KB, h265-666KB Front mp4 - 1548KB, h265 - 1171KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |367s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |30 (front or rear)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Front mp4 - 3420KB, h265-2970KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |453s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1280x720
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |30+30 (both)
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Rear mp4 - 3277KB, h265-1331KB Front mp4 - 3096KB, h265 - 2342KB
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |733s
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |-
|}

'''* NOTE:''' This approximate time which we receive during testing in real cases can be different.

'''* NOTE''' Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.

[[Category:Teltonika DualCam]]

DualCam Firmware errata

2025-07-09T07:05:26Z

Edgar.dementenko: /* Firmware download for FMX125/FMX225/FMC650 */

__TOC__

==Firmware Version==

We are always improving our device's performance, stability, and reliability. 
This document describes '''DualCAM platform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
(E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=)
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMC125/FMC225/FMC650==

Link: [https://drive.teltonika.lt/d/e5c4b09a60b74fa5b6a0/ Firmware]

Password: 3RpOAf96

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work with DualCam/DashCam.
* '''NEW:''' Two camera support.
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.112'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-11-23}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DualCam/DashCam support for FMC650.
|-
|}

==Firmware for FMC125==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''04.00.00.Rev.371'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* NEW: QT and MEIG modem support
* Network stability improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.534'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* Port stability related changes
* Metadata version 4 support for DualCam and DashCam
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.531'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-02-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.663'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-07-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Network stability improvements.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.662'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DualCam capture buffer loop
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.661'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-03-27}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Only one video download with video priority selected
* Camera state check logic fixed
* DualCam time zone in metadata changed to Unix time (UTC+0)
* Option to select file priority for Dual Cam
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.367'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-11-29}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Metadata duplicate
* Gnss sync issues. Mrg of 03.27.13.Rev.441 meig branch
* Metadata overwritten when 2 or more files queued for upload
* Timestamp drift after long time period in deep sleep
* MEIG modem throws errors and callstacks under heavy load
* SMS request response when video buffer is empty
* Periodic image buffer issues in deep sleep
* MEIG GPRS quality update
* Video buffer stuck after wrong timestamp
* Modem unstable at full DualCam buffer
* Camreq identical metadata issue
* DualCam video trigger max value
* DualCam custom image resolution
* DualCam fw version not available in logs
* SD card format response issue

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.362'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* NITZ gives unstable time
* Single side of camera footage is uploaded
* MEIG modem file upload issue
* DualCam base update for MEIG support
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.365'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-03-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Minor improvements
* DualCam metadata timestamp mismatch
* Increased timeout for video data pack request
* CRC calculation mismatch after file upload resume
* Periodic image sending
* Add camera time zone parameter
* Added periodic time check and sync for the camera
* Adjusted DualCam command timeouts
* Added fixes and workarounds for cam command fails
* FPS parameter added to the meta data command
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.361'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-09-17}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Minor improvements
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.07.Rev.360'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-08-30}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Extended video and image sending configuration
* Added Domain and Port parameters to “camreq” command
* Extended “camreq” response
* Added “camgetver” command
* Fixed timestamp for video meta data
* Improved system stability and fixed general bugs
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.03.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-06-18}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added image sending trigger
* Ability to configure multiple video triggers
* Always enabled DualCam scenario support
* Improved system stability and fixed general bugs
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.00.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-02-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial release
|-
|}

==Firmware for DualCam ==
{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DUALCAM FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-05-20}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added watch dog for camera to restart it self if camera will stuck
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.2'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-01-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added video buffer pool,repair the write rate of the SD card
* Solved the bug when 35min can not download video
* Changed the logic of FPS setting and switching,the video saves the exact FPS of each video packet in the PTM_FRAME
* Improved the picture and video quality,image edge trimming
* Added flash upgrade mode
* Modified command to get Image quality
* Resolved the problem that the camera restarts after switching the OSD switch
* Optimized setting video frame rate without restarting the camera
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Improved stability and fixes of camera data packets
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.2'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-06-02}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Fixed issue with front camera crash if picture size is too large
* Added command to check the camera version
* Improved system stability and fixed general bugs
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V1.9.0'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021- 02-19}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Initial release
|-
|}

[[Category:Teltonika DualCam]]

DashCam Firmware errata

2025-07-09T07:03:48Z

Edgar.dementenko: /* Firmware for FMX125 */

__TOC__

==Firmware Version==

We are always improving our device's performance, stability, and reliability. 
This document describes '''Dashcamplatform and FMX125''' devices' firmware improvements, changes, new features implementations as well as current firmware release version.

'''NOTE: Starting from 2025-06-16, our camera firmware has been merged into the FMC650 base firmware with Spec ID 1111.'''

'''To make it visible in the Configurator support, you need to enter a special key.When you open the Configurator, press the key combination Ctrl + Alt + I, then enter the provided key.'''

<pre style="margin-left: 0px;">
E+qh2Nyp3aP7XQZsUr/CxcCC0Xnsj+LPKmKRLsJJYioAAADPA1SQjH4rJsK6oOVY1m8oOi/GttDkvdLnMLVpTwNDKHFKwUbfiEP8uNKdKIXGD4f+bC3iVtJqX9x+8GUpHA/4sidJEpSAO1xinj2MOXQu7lQyrtRzX479iDxQjMeuLMH2r6M7ZD4+5P7vu5cN6uhgXx4RANoUksShK4uLqJg6g6UNboHLsIHfE3eGECDCDrGOhQAEAAAAAAAIix8=
</pre>

'''In the "New key" section, press "Register". After that, the Configurator will recognize the device and the new firmware.'''

[[File:Screenshot_2025-06-30_093721.jpg|frameless]]

'''You only need to enter the code once on the computer where you are using the configurator. If you use a different computer, you will need to enter the code again.'''

==Firmware download for FMX125/FMX225/FMC650==

Link: [https://drive.teltonika.lt/d/e5c4b09a60b74fa5b6a0/ Firmware]

Password: 3RpOAf96

You can download all necessary firmware by clicking [[Firmware_versions#Video_Solutions|here]].

==Firmware for FMC650==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.01.00.Rev.22''' ,'''Spec ID 1111'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2025-06-16}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Iridium SBD transmission improvement.
* Base firmware merge with Spec ID 1111
* Additional network fixes.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.104'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-11-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Support DSM FW 2.4.0 added.
* Port tacho border crossing IO.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.101'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-08-06}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Geofence functionality pictures receiving fix.
* Green Driving pictures receiving fix.
* File transfer modem rebooting state fix.
* Additional verbal information by request/download/upload pictures.
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.16.Rev.100'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-06-12}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Port Tacho Border Crossing IO.
* VDO Counter functionality fix.
* Full Base Support
|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.116'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-04-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* '''NEW:''' ADAS support.
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.114'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-03-01}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Stable work with DualCam/DashCam.
* '''NEW:''' Two camera support.
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.00.14.Rev.112'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-11-23}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added DualCam/DashCam support for FMC650.
|-
|}

==Firmware for FMC125==

{| class="wikitable" style="width: 100%;"
|+
|-
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.534'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-07-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
* Port stability related changes
* Metadata version 4 support for DualCam and DashCam
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.29.00.Rev.531'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2024-02-15}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Full base update
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.663'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-07-31}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Network stability improvements.
|-

|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''03.27.13.Rev.662'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2023-06-05}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* DashCam accessory-monitoring feature
* DashCam support added.
* DualCam capture buffer loop
|-
|}

==Firmware for DashCam ==
{| class="wikitable" style="width: 100%;"
|+
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |DashCam FIRMWARE VERSION
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{fw|'''V2.2.3'''}}} 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-05-20}}}
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
* Added watch dog for camera to restart it self if camera will stuck
|-
|}

[[Category:Teltonika DashCam]]

ADAS Camera Manual

2025-07-08T10:34:43Z

Edgar.dementenko: /* Product Specification */

__TOC__

== Product Specification ==
<table class="nd-othertables" style="width: 68%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Technical data</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Supported by</td>
<td style="width: 8%; text-align:left">FMC650,FMB125, FMC125, FMB225, FMC225</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Camera Resolution</td>
<td style="width: 8%; text-align:left">1280 x 720 (HD)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">View angle</td>
<td style="width: 8%; text-align:left">30 (V), 52 (H), 60 (D)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Size</td>
<td style="width: 8%; text-align:left">80 x 120 x 50 mm</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">SD card</td>
<td style="width: 8%; text-align:left">Max. 128GB</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Video encoding</td>
<td style="width: 8%; text-align:left">H264</td>
</tr>
<tr>
<table class="nd-othertables" style="width: 68%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Electrical parameters</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Input voltage range</td>
<td style="width: 8%; text-align:left">9 – 36 V</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Temperature</td>
<td style="width: 8%; text-align:left">-20 °C to +70 °C (operation)
-40 °C to +85 °C (storage)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Relative Humidity</td>
<td style="width: 8%; text-align:left">Max. 90 %</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Power consumption</td>
<td style="width: 8%; text-align:left">12V max @300mA
12V Idle state @ 3mA</td>
</tr>
<tr> 
<table class="nd-othertables" style="width: 68%;">
<th style="width: 10%; text-align:left; vertical-align:middle; color:black">Interface</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">USB</td>
<td style="width: 8%; text-align:left">USB 2.0 (for calibration)</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">CAN</td>
<td style="width: 8%; text-align:left">CAN 2.0 (Car signal – Left/Right, Speed, RPM, Brake)</td>
</tr>
<tr> 
<td style="width: 8%; text-align:left">RS232</td>
<td style="width: 8%; text-align:left">Indicator TX/RC (for communication with FM device)</td>
</tr>
</table>

== ADAS and FMC650 Features ==
[[File:MicrosoftTeams-image (12).png|left|frameless|52x52px]]
'''Periodic photo sending'''

Possible to receive periodical photo from ADAS

[[File:MicrosoftTeams-image (13).png|left|frameless|52x52px]]

'''Video/photo by request'''

You can request video/photo from ADAS

== ADAS Features ==
[[File:PEDESTRIAN COLLISION WARNING.png|left|frameless|52x52px]]
'''PCW''' '''(PEDESTRIAN COLLISION WARNING)'''

Notifies driver of any pedestrians, bicycles or motorcycles ahead.
[[File:LANE DEPARTURE WARNING.png|left|frameless|52x52px]]
'''LDW (LANE DEPARTURE WARNING)'''

Helps to regain direction if the driver unintentionally departs lanes.
[[File:FORWARD COLLISION WARNING.png|left|frameless|52x52px]]
'''FCW (FORWARD COLLISION WARNING)'''
[[File:FORWARD PROXIMITY WARNING.png|left|frameless|52x52px]]
Sends warning alerts if a crash is imminent to assist driver in maintaining a safe traveling distance.

'''FPW (FORWARD PROXIMITY WARNING)'''

Notifies driver if the vehicle moves forward while another vehicle is in the detection range, which can be setup at 1 m, 2 m, 3 meters.
[[File:FRONT VEHICLE START ALARM.png|left|frameless|52x52px]]
'''FVSA (FRONT VEHICLE START ALARM)'''

Notifies driver if the front vehicle started moving forward from 0 speed without the vehicle moving within 2 secs.
[[File:SAFETYDISTANCEALERT.png|left|frameless|52x52px]]
'''SDA (SAFETY DISTANCE ALERT)'''

Attracts the driver's attention to keep the safe distance ahead by warning the driver (active from 30km/h).
[[File:DIGITAL VIDEO RECORDER.png|left|frameless|52x52px]]
'''DVR (DIGITAL VIDEO RECORDER)'''

Records scenes as HD+HD resolutions into SD card before and after an accident. (Every minute in a loop)
[[File:SPEED LIMIT RECOGNITION.png|left|frameless|52x52px]]
'''SLR (SPEED LIMIT RECOGNITION)'''

Recognizes speed limit signs and provides warnings for over speed (Available with ADAS Plus).

==ADAS data transferring timing==
'''Test was performed using Baudrate 460800'''
{| class="wikitable"
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image resolution'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image compression (%)'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Video duration (s)'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of image'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Size of video'''
'''FMC640 4G / FMB640 2G'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Time interval (s) from trigger to files received on server FMC640 4G / FMB640 2G'''
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Photo example'''
|-
|colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Image
|-
|style="text-align: center;|640x480
|style="text-align: center;|0
|<nowiki>-</nowiki>
|style="text-align: center;|~10kB
|style="text-align: center;| -
|style="text-align: center;|48s / 70s
|style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x4801.jpg|thumb]]
|-
|style="text-align: center;|1280x720
|style="text-align: center;|0
|<nowiki>-</nowiki>
|style="text-align: center;|~28kB
|style="text-align: center;| -
|style="text-align: center;|67s / 103s
|style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x7201.jpg|thumb]]
|-
| colspan="7" style="text-align: center; style=" width: 150px; background: white; color: black;" |Video
|-
|style="text-align: center;|640x480
|style="text-align: center;| 0
|style="text-align: center;|10s
|style="text-align: center;| -
|style="text-align: center;|~144kB
|style="text-align: center;|86s / 198s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 25
|style="text-align: center;|10s
|style="text-align: center;| -
|style="text-align: center;|~140kB
|style="text-align: center;|58s / 144s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 50
|style="text-align: center;|10s
|style="text-align: center;| -
|style="text-align: center;|~139kB
|style="text-align: center;|48s / 110s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 0
|style="text-align: center;|20s
|style="text-align: center;| -
|style="text-align: center;|~285 kb
|style="text-align: center;|183s / 400s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 25
|style="text-align: center;|20s
|style="text-align: center;| -
|style="text-align: center;|~201 kb
|style="text-align: center;|155s / 349s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 50
|style="text-align: center;|20s
|style="text-align: center;| -
|style="text-align: center;|~150 kb
|style="text-align: center;|145s / 400s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 0
|style="text-align: center;|30s
|style="text-align: center;| -
|style="text-align: center;|~439 kb
|style="text-align: center;|201s / 501s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 25
|style="text-align: center;|30s
|style="text-align: center;| -
|style="text-align: center;|~390 kb
|style="text-align: center;|185s / 3558s
|
|-
|style="text-align: center;|640x480
|style="text-align: center;| 50
|style="text-align: center;|30s
|style="text-align: center;| -
|style="text-align: center;|~239 kb
|style="text-align: center;|180s / 550s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 0
|style="text-align: center;|10s
|style="text-align: center;| -
|style="text-align: center;|~286KB
|style="text-align: center;|90s / 261s
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 25
|style="text-align: center;|10s
|style="text-align: center;| -
|style="text-align: center;|~260KB
|style="text-align: center;|78s / 215s
|style="text-align: center;|[[File:481012 Adas apkirptas 2.mp4]]
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 50
|style="text-align: center;|10s
|style="text-align: center;| -
|style="text-align: center;|~235KB
|style="text-align: center;|70s / 211s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 0
|style="text-align: center;|20s
|style="text-align: center;| -
|style="text-align: center;|~590 kb
|style="text-align: center;|120s / 502s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 25
|style="text-align: center;|20s
|style="text-align: center;| -
|style="text-align: center;|~494KB
|style="text-align: center;|111s / 430s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 50
|style="text-align: center;|20s
|style="text-align: center;| -
|style="text-align: center;|~460KB
|style="text-align: center;|100s / 297s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 0
|style="text-align: center;|30s
|style="text-align: center;| -
|style="text-align: center;|~1MB
|style="text-align: center;|241s / 710s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 25
|style="text-align: center;|30s
|style="text-align: center;| -
|style="text-align: center;|~720KB
|style="text-align: center;|163s / 540s
|
|-
|style="text-align: center;|1280x720
|style="text-align: center;| 50
|style="text-align: center;|30s
|style="text-align: center;| -
|style="text-align: center;|~695KB
|style="text-align: center;|160s / 512s
|
|}
'''* NOTE:''' This approximate time which we receive during testing in real cases can be different.

'''* NOTE''' Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.
[[Category: Teltonika ADAS]]

Teltonika DashCam

2025-07-08T06:38:10Z

Edgar.dementenko: /* Downloads */

'''Teltonika DashCam''' solution is perfect for capturing videos or pictures of the events that might occur on the road, e.g. crash. Mounted on the vehicle front window, one camera are used, front, to record videos before and after the events, take photos periodically or by request and send all data to the server.
'''Also the possibility to connect two cameras, DSM and DashCam or DualCam, to one device, FMC650'''. By utilizing the two RS232 ports on the FMC650, you can connect the DSM camera for driver status monitoring to one port and the DualCam or DashCam camera for road and cargo monitoring to the second port. '''[https://wiki.teltonika-gps.com/view/DashCam_Configuration#Connecting_two_cameras_simultaneously_for_FMx650 Configuration]'''

DashCam is connected to '''FMC125, FMC225 and FMC650''' devices using the RS232 interface.

[[File:558163 DashCam-2023-04-26 v1 (1).png|alt=|right|500x500px]]

*[[DashCam_First_Start | First Start]]
*[[DashCam_Camera_Manual | Camera Manual]]
*[[DashCam Configuration]]
*[[DashCam_Data_image/video_review | Data image/video review]]
*[[DashCam Communication Protocol]]
*[[DashCam Data Sending Parameters ID]]
*[[DashCam SMS commands]]
*[[DashCam Certifications %26 Approvals | DashCam Certifications & Approvals]]
*[[DashCam Troubleshoot]]
*[[DashCam Firmware errata]]
*[[DashCam Product Change Notifications]]
*[[DashCam Nomenclature, classification codes]]
*[[DashCam FAQ]]
*[[DashCam Integration on platfroms]]
*[[DashCam EAN]]
*[[DashCam Testing]]
*[[CloudView Platform]]

==Downloads==
'''Manual & Documentation''' 

[[File:pdf_icon.png|32px|link=]]
[[Media:Teltonika DashCam datasheet v1.5 (1).pdf|DashCam Datasheet (EN)]]
(Updated on: 2025-07-08)

==Additional information==

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

[[Category:Video Solutions]]

Teltonika DashCam

2025-07-08T06:37:47Z

Edgar.dementenko: /* Downloads */

'''Teltonika DashCam''' solution is perfect for capturing videos or pictures of the events that might occur on the road, e.g. crash. Mounted on the vehicle front window, one camera are used, front, to record videos before and after the events, take photos periodically or by request and send all data to the server.
'''Also the possibility to connect two cameras, DSM and DashCam or DualCam, to one device, FMC650'''. By utilizing the two RS232 ports on the FMC650, you can connect the DSM camera for driver status monitoring to one port and the DualCam or DashCam camera for road and cargo monitoring to the second port. '''[https://wiki.teltonika-gps.com/view/DashCam_Configuration#Connecting_two_cameras_simultaneously_for_FMx650 Configuration]'''

DashCam is connected to '''FMC125, FMC225 and FMC650''' devices using the RS232 interface.

[[File:558163 DashCam-2023-04-26 v1 (1).png|alt=|right|500x500px]]

*[[DashCam_First_Start | First Start]]
*[[DashCam_Camera_Manual | Camera Manual]]
*[[DashCam Configuration]]
*[[DashCam_Data_image/video_review | Data image/video review]]
*[[DashCam Communication Protocol]]
*[[DashCam Data Sending Parameters ID]]
*[[DashCam SMS commands]]
*[[DashCam Certifications %26 Approvals | DashCam Certifications & Approvals]]
*[[DashCam Troubleshoot]]
*[[DashCam Firmware errata]]
*[[DashCam Product Change Notifications]]
*[[DashCam Nomenclature, classification codes]]
*[[DashCam FAQ]]
*[[DashCam Integration on platfroms]]
*[[DashCam EAN]]
*[[DashCam Testing]]
*[[CloudView Platform]]

==Downloads==
'''Manual & Documentation''' 

[[File:pdf_icon.png|32px|link=]]
[[Media:Teltonika DashCam datasheet v1.5 (1).pdf|thumb]]
|DashCam Datasheet (EN)]]
(Updated on: 2025-07-08)

==Additional information==

{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

[[Category:Video Solutions]]

File:Teltonika DashCam datasheet v1.5 (1).pdf

2025-07-08T06:37:30Z

Edgar.dementenko:

rgr