View source for Template:FMX Autonomous Trackers Firmware Changelog

{{#switch: {{{model}}} 
| TAT100 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION / CONFIGURATOR</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.571'''<br>BlueNRG version: 1.0.4.Rev.02 (HW ver.: 31 & 62)<br>Configurator version: 1.7.74_B.TAT1_R.8</td>
<td style="vertical-align: middle">2025.02.11</td>
<td style="text-align: left; vertical-align: top">
* None
</td>
<td style="text-align: left; vertical-align: top">
* Fixed an issue where the device got stuck with an open link and failed to go to sleep in an edge case.
* Ported GPRS Authentication for Quectel modems.
* Minor improvements on the modem and BlueNRG firmware.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.569'''<br>BlueNRG version: 10.0.3.Rev.00 (HW ver.: 31)<br>1.0.3.Rev.00 (HW ver.: 62)<br>Configurator version: 1.7.74_E.TAT1_R.7</td>
<td style="vertical-align: middle">2024.08.19</td>
<td style="text-align: left; vertical-align: top">
* Added an option to configure TLS functionality.
* Added an option to configure SMS record sending.
* Added an option to configure MQTT Azure and AWS support.
* Added an option to configure I am alive feature.
</td>
<td style="text-align: left; vertical-align: top">
* Added TLS functionality feature.
* Added SMS record sending feature.
* Added MQTT Azure and AWS support.
* Added I am alive feature.
* Fixed X, Y and Z IO elements not being included with First Power On record.
* Extended On Stop and On Move periodic timers to maximum value of 7 days.
* Improvements to Static Navigation logic in no GPS situation.
* New AVL ID 69 value added (4 - no GPS in Static Navigation).
* Improved Recovery mode trigger logic in Lost Sensor scenario.
* Added error code when BLE sensor is lost.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.564'''<br>BlueNRG version: 10.4.12 (HW ver.: 31)<br>0.4.12 (HW ver.: 62)<br>Configurator version: 1.7.74_B.TAT1_R.6</td>
<td style="vertical-align: middle">2024.03.12</td>
<td style="text-align: left; vertical-align: top">
* Fixed configurator crash after firmware update.
* Added cell ID I/O elements
* Fixed error when disabling BLE features in configuration.
* Added GSM area code I/O element
* Simplified EYE sensor configuration.
* Added Autonomous Alarm System feature.
</td>
<td style="text-align: left; vertical-align: top">
* Fixed periodic timer starting in Recovery mode.
* Improved backup tracker scan procedure.
* Fixed issue with GPS fix with First Power On record.
* Improved energy management in sleep mode when device is in motion.
* Fixed crash on BLE sensor alarm.
* Bluetooth scanning and data parsing optimization.
* DNS resolve improvements.
* Fixed periodic timer starting when tracking scenario selected as None.
* Changed default movement sensitivity to 150 mG
* Changed default GNSS mode to GLONASS, GPS and GALILEO
* Fixed EYE sensor data multiplier for correct data displaying.
* Fixed issue if GPRS is lost during record sending.
* Fixed GPRS command processing in UDP mode.
* Improved received SMS reading process.
* Improved connection to Fota process.
* Fixed BLE sensor data not being included in periodic records.
* Improved static navigation logic.
* Improved Bluetooth scan stability.
* Added BLE beacons for Recovery mode trigger.
* Movement logic rework.
* Added condition to stop GNSS search if less than 3 satellites found in the first 60 seconds.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.545'''<br>BlueNRG version: 10.3.12 (HW ver.: 31)<br>0.3.12 (HW ver.: 62)<br>Configurator version: 1.7.16_E.TAT100.R23 RELEASE</td>
<td style="vertical-align: middle">2022.08.23</td>
<td style="text-align: left; vertical-align: top">
* No changes
</td>
<td style="text-align: left; vertical-align: top">
* Fixed issue with incorrectly detected SIM slot for eSIM devices.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.543'''<br>BlueNRG version: 10.3.12 (HW ver.: 31)<br>0.3.12 (HW ver.: 62)<br>Configurator version: 1.7.16_E.TAT100.R23 RELEASE</td>
<td style="vertical-align: middle">2022.08.08</td>
<td style="text-align: left; vertical-align: top">
* Updated Teltonika Configurator version to set Central device default IMEI to 300000000000000
* Added Recovery mode option
* Added I/O element of Recovery Mode
* Added more options of movement sensitivity threshold [50-1000mG]
* Configurator for BLE FW and Backup FW was merged into one.
</td>
<td style="text-align: left; vertical-align: top">
* SMS command created for getting device statistics
* Protection from writing other devices FW
* Added condition to prevent modem waking up at midnight if scheduler is configured
* Added reconfiguration mechanism that lets FW work with / without SMPS filterMissing
* Fixed issue of missing 4th sensor's data with Monitoring operand
* Fixed too frequent / unnecessary scans with all sensors configured as monitoring
* Fixed sensors scan starting with monitoring operand when Backup tracker is configured
* Backup tracker scan not starting right after
* Time synchronization every 24 hours
* Fixed LBS data sending issue
* New AVL ID 20015 for Modem UpTime (in seconds)
* Added response sending if recovery command is sent through GPRS
* The next periodic record after Recovery mode deactivation being sent with AVL ID 20012 - fixed
* Reduced EQ Core update frequency
* Fixed battery consumption issue when GSM is jammed.
* LED status changed from constant on to blinking mode to save the battery
* Added Recovery mode feature
* Implemented Recovery mode activation from the Backup tracking alarm
* Added EYE sensors support
* Fixed Minor bugs regarding the sensors
* Fixed Short period Recovery Mode records
* Extended Backup Tracker: Central device IMEI range
* Backup tracker: Scanning logic has been changed, scan duration is not configurable anymore, it is up to 60 seconds by default now.
* Implemented Record timestamp shift feature
* Fixed BLE sensor records with wrong event ID being sent
* Fixed BLE sensor record duplicates with <code>On change</code> operand
* Fixed BLE sensor <code>On Exit</code> record not generating when switching to sleep mode
* Fixed <code>Custom1</code> sensor data in SMS being sent as NaN ''(empty)''
* Fixed duplicate BLE sensor data after waking up
* Changed required packets amount in backup tracker scenario and minimal scan duration
* Fixed backup tracker alarm not triggering just before wakeup
* Fixed backup tracker not detecting enough packets during BLE scan
* Periodic records do not affect backup tracker alarm record generation
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.522'''<br>BlueNRG version: 10.2.21.Rev.01<br>Configurator version: 1.7.16_R.TAT100.R2</td>
<td style="vertical-align: middle">2021.12.21</td>
<td style="text-align: left; vertical-align: top">
* No changes
</td>
<td style="text-align: left; vertical-align: top">
* Improved battery safety features
* Fixed stuck download during FOTA update
* Fixed device not restarting to update FW after FOTA download
* Improved main device packet filtering
* Improved battery voltage measurement
* Fixed the device not restarting after FOTA WEB update when it happens at the same time as periodic record
* Fixed random statistic losses
* Fixed GNSS module status not being accurate in Teltonika Configurator
* Improved static navigation mode
* Fixed scheduler time resync timer not working properly
* Fixed statistic not being deleted from RAM
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.15.Rev.519'''<br>BlueNRG version: 10.2.14<br>Configurator version: 1.7.16_R.TAT100.R2</td>
<td style="vertical-align: middle">2021.10.19</td>
<td style="text-align: left; vertical-align: top">
* No changes
</td>
<td style="text-align: left; vertical-align: top">
* Fixed fake movement detection on startup
* Fixed problem when the device is stuck in <b>On Stop</b> tracking mode after reconfiguration
* Added Power-On reason data and fixed version changes to device statistics
* Fixed Backup tracker issue where the alarm mode is not immediately activated when the central device disappears
* Fixed empty GSM I/O elements
* Fixed an issue where UTC is added after each reconfiguration
* Added record printing to <code>Dump log</code>
* LBS data is not included in records if GNSS fix was caught
* Fixed NTP timesync failure if offset is zero
* Improved record creation (wake up from sleep) during <b>Backup tracker</b> alarms
<hr>
* Improved GNSS module control with <code>Static Navigation</code> and <code>LBS</code>
* Added prevention from inappropriate record generation if the battery is low (HW watchdog)
* Added statistic element for USB connected uptime
* Added timestamp to BlueNRG serial prints
* Minor improvement for BlueNRG firmware update via configurator
* Added filter for <code>LBS</code> cell_id duplicates
* Improved Bluetooth sensor record creation with <code>'On Change'</code> operand
* Added Bluetooth sensor support
* Added condition to skip LBS data update if location source is only GNSS
* Increased retries of AT+# command in order to avoid empty LBS data from modem
* Changed <code>Open link timeout</code> to 15s
* Fixed an issue where the tracking mode would change from the scheduler to periodic
* Improved logic for multiple <code>FOTA Web</code> tasks update in the same connection
* Implemented rule for additional connection to <code>FOTA Web</code> after baseband firmware update
* Added accelerometer version information inside '.info' serial command
* Fixed an issue with battery voltage <code>I/O element</code> when record saving is overlapping with a firmware update
* Fixed <code>Scheduler</code> record sending at midnight
* Fixed missed LBS values inside <code>I/O elements</code>
* Fixed an issue when GNSS speed is not zero while the device is in a stationary position
* General minor improvements
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.10.Rev.509'''<br>BlueNRG: 10.2.3_Rev.00<br>Configurator: 1.7.16_E.TAT100_04</td>
<td style="vertical-align: middle">2021.05.10</td>
<td style="text-align: left; vertical-align: top">
* Added <code>Test Connection</code> button
* Temporarily removed <code>Secondary Server Settings</code>
* Tracking Period default value changed to 28800 (s)
</td>
<td style="text-align: left; vertical-align: top">
* Implemented <code>Test Connection</code> feature.
* Added BlueNRG logging to DUMP files
* Added LBS data logging to DUMP files
* Added protection that blocks FMB firmware flash to AT devices
* Added time-sync update with ''asset purpose'' command
* Improved periodic record timer logic
* Improved battery voltage measurement
* Improved periodic GPRS data sending while USB is connected to the device
* Disabled SMPS filter
* Fixed record sending when movement is triggered at all times
* Improved NTP time-sync
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.05.Rev.510'''<br>BlueNRG: 0.1.7<br>Configurator: (Not explicitly listed)</td>
<td style="vertical-align: middle">2020.12.03</td>
<td style="text-align: left; vertical-align: top">
* Removed tracking scenarios
* Removed speed source parameter
* Removed record saving/sending without TS parameter
* Removed LED Indication parameter
* Removed NTP resync parameter
</td>
<td style="text-align: left; vertical-align: top">
* Implemented FOTA support.
* Improved GNSS position capturing.
* Reworked Periodic and Scheduler tracking counters.
* Implemented device logging via USB.
* Implemented statistics acquisition to flash memory.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.05.Rev.507'''<br>BlueNRG: 0.1.5<br>Configurator: (Not explicitly listed)</td>
<td style="vertical-align: middle">2020.09.29</td>
<td style="text-align: left; vertical-align: top">
* Implemented GNSS Source configuration. Available options: BeiDou, GLONASS, Galileo and GPS.
* Added I/O elements: Data Mode, GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, GSM Cell ID, GSM Area Code, Battery Voltage, Active GSM Operator, ICCID, Coordinates ISO6709.
* Added SMS command autorization via Login and Password logic.
</td>
<td style="text-align: left; vertical-align: top">
* Implemented 'Codec 8', 'Codec 8 Extended' and 'Codec 12' protocols.
* Implemented NTP, NITZ and GNSS time synchronization sources.
* Implemented ability to send GPRS data from device via TCP or UDP channels.
* Implemented connection to server timeouts.
* Ported TLS encryption functionality from other Teltonika devices.
* Implemented Periodic and Scheduler tracking.
* Implemented BlueNRG firmware update via GPRS. This function will be used to reflash BlueNRG firmware via FOTA WEB.
* Added GSM number authorization logic.
</td>
</tr>
</table>

| TAT140 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.571'''<br>BlueNRG version: 1.0.4.Rev.02<br>Configurator version: 1.7.74_B.TAT1_R.8</td>
<td style="vertical-align: middle">2025.02.11</td>
<td style="text-align: left; vertical-align: top">
* None
</td>
<td style="text-align: left; vertical-align: top">
* Fixed an issue where the device got stuck with an open link and failed to go to sleep in an edge case.
* Ported GPRS Authentication for Quectel modems.
* Minor improvements on the modem and BlueNRG firmware.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.569'''<br>BlueNRG version: 10.0.3.Rev.00<br>Configurator version: 1.7.74_E.TAT1_R.7</td>
<td style="vertical-align: middle">2024.08.19</td>
<td style="text-align: left; vertical-align: top">
* Added an option to configure TLS functionality.
* Added an option to configure SMS record sending.
* Added an option to configure MQTT Azure and AWS support.
* Added an option to configure I am alive feature.
</td>
<td style="text-align: left; vertical-align: top">
* Added TLS functionality feature.
* Added SMS record sending feature.
* Added MQTT Azure and AWS support.
* Added I am alive feature.
* Fixed X, Y and Z IO elements not being included with First Power On record.
* Extended On Stop and On Move periodic timers to maximum value of 7 days.
* Improvements to Static Navigation logic in no GPS situation.
* New AVL ID 69 value added (4 - no GPS in Static Navigation).
* Improved Recovery mode trigger logic in Lost Sensor scenario.
* Added error code when BLE sensor is lost.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.564'''<br>BlueNRG version: 0.4.12<br>Configurator version: 1.7.74_B.TAT1_R.6</td>
<td style="vertical-align: middle">2024.03.12</td>
<td style="text-align: left; vertical-align: top">
* Fixed configurator crash after firmware update.
* Added cell ID I/O elements
</td>
<td style="text-align: left; vertical-align: top">
* Fixed periodic timer starting in Recovery mode.
* Improved backup tracker scan procedure.
* Fixed issue with GPS fix with First Power On record.
* Improved energy management in sleep mode when device is in motion.
* Fixed crash on BLE sensor alarm.
* Bluetooth scanning and data parsing optimization.
* DNS resolve improvements.
* Fixed periodic timer starting when tracking scenario selected as None.
* Added cell ID I/O elements
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.558'''<br>BlueNRG version: 0.4.8<br>Configurator version: 1.7.16_B.TAT1_R.3</td>
<td style="vertical-align: middle">2023.07.18</td>
<td style="text-align: left; vertical-align: top">* Removed non configurable elements</td>
<td style="text-align: left; vertical-align: top">
* [FIX] Improved EYE sensor data detection to be suitable for all sensor modes
* [FIX] Fixed Periodic timer still running when Recovery mode is activated in sleep from Backup tracker
* [FIX] Hotfix for EG915ULA modem status commands
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.557'''<br>BlueNRG version: 0.4.7<br>Configurator version: 1.7.16_B.TAT1_R.1</td>
<td style="vertical-align: middle">2023.05.10</td>
<td style="text-align: left; vertical-align: top">Initial release</td>
<td style="text-align: left; vertical-align: top">Initial release</td>
</tr>
</table>

| TAT141 =
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:25%; vertical-align: middle; text-align: center;">'''VERSION & CONFIGURATOR'''</th>
<th style="width:10%; vertical-align: middle; text-align: center;">'''RELEASE DATE'''</th>
<th style="width:35%; vertical-align: middle; text-align: center;">'''CONFIGURATOR CHANGES'''</th>
<th style="width:30%; vertical-align: middle; text-align: center;">'''FIRMWARE CHANGES'''</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; text-align: center;">'''Firmware version: 55.00.16.Rev.571'''<br>BlueNRG version: 1.0.4.Rev.02<br>Configurator version: 1.7.74_B.TAT1_R.8</td>
<td style="vertical-align: middle; text-align: center;">2025.02.11</td>
<td style="text-align: left; vertical-align: top">
* None
</td>
<td style="text-align: left; vertical-align: top">
* Fixed an issue where the device got stuck with an open link and failed to go to sleep in an edge case.
* Ported GPRS Authentication for Quectel modems.
* Minor improvements on the modem and BlueNRG firmware.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; text-align: center;">'''Firmware version: 55.00.16.Rev.569'''<br>BlueNRG version: 10.0.3.Rev.00<br>Configurator version: 1.7.74_E.TAT1_R.7</td>
<td style="vertical-align: middle; text-align: center;">2024.08.19</td>
<td style="text-align: left; vertical-align: top">
* Added an option to configure TLS functionality.
* Added an option to configure SMS record sending.
* Added an option to configure MQTT Azure and AWS support.
* Added an option to configure I am alive feature.
</td>
<td style="text-align: left; vertical-align: top">
* Added TLS functionality feature.
* Added SMS record sending feature.
* Added MQTT Azure and AWS support.
* Added I am alive feature.
* Fixed X, Y and Z IO elements not being included with First Power On record.
* Extended On Stop and On Move periodic timers to maximum value of 7 days.
* Improvements to Static Navigation logic in no GPS situation.
* New AVL ID 69 value added (4 - no GPS in Static Navigation).
* Improved Recovery mode trigger logic in Lost Sensor scenario.
* Added error code when BLE sensor is lost.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; text-align: center;">'''Firmware version: 55.00.16.Rev.564'''<br>BlueNRG version: 0.4.12<br>Configurator version: 1.7.74_B.TAT1_R.6</td>
<td style="vertical-align: middle; text-align: center;">2024.03.12</td>
<td style="text-align: left; vertical-align: top">
* Fixed configurator crash after firmware update.
* Added cell ID I/O elements
</td>
<td style="text-align: left; vertical-align: top">
* Fixed periodic timer starting in Recovery mode.
* Improved backup tracker scan procedure.
* Fixed issue with GPS fix with First Power On record.
* Improved energy management in sleep mode when device is in motion.
* Fixed crash on BLE sensor alarm.
* Bluetooth scanning and data parsing optimization.
* DNS resolve improvements.
* Fixed periodic timer starting when tracking scenario selected as None.
* Added cell ID I/O elements
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; text-align: center;">'''Firmware version: 55.00.16.Rev.558'''<br>BlueNRG version: 0.4.8<br>Configurator version: 1.7.16_B.TAT1_R.3</td>
<td style="vertical-align: middle; text-align: center;">2023.07.18</td>
<td style="text-align: left; vertical-align: top">
* Removed non configurable elements
</td>
<td style="text-align: left; vertical-align: top">
* [FIX] Improved EYE sensor data detection to be suitable for all sensor modes
* [FIX] Fixed Periodic timer still running when Recovery mode is activated in sleep from Backup tracker
* [FIX] Hotfix for EG915ULA modem status commands
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle; text-align: center;">'''Firmware version: 55.00.16.Rev.557'''<br>BlueNRG version: 0.4.7<br>Configurator version: 1.7.16_B.TAT1_R.1</td>
<td style="vertical-align: middle; text-align: center;">2023.05.10</td>
<td style="text-align: left; vertical-align: top">Initial release</td>
<td style="text-align: left; vertical-align: top">Initial release</td>
</tr>
</table>

| TAT240 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.571'''<br>BlueNRG version: 1.0.4.Rev.02<br>Configurator version: 1.7.74_B.TAT1_R.8</td>
<td style="vertical-align: middle">2025.02.11</td>
<td style="text-align: left; vertical-align: top">
* None
</td>
<td style="text-align: left; vertical-align: top">
* Fixed an issue where the device got stuck with an open link and failed to go to sleep in an edge case.
* Ported GPRS Authentication for Quectel modems.
* Minor improvements on the modem and BlueNRG firmware.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.569'''<br>BlueNRG version: 10.0.3.Rev.00<br>Configurator version: 1.7.74_E.TAT1_R.7</td>
<td style="vertical-align: middle">2024.08.19</td>
<td style="text-align: left; vertical-align: top">
* Added an option to configure TLS functionality.
* Added an option to configure SMS record sending.
* Added an option to configure MQTT Azure and AWS support.
* Added an option to configure I am alive feature.
</td>
<td style="text-align: left; vertical-align: top">
* Added TLS functionality feature.
* Added SMS record sending feature.
* Added MQTT Azure and AWS support.
* Added I am alive feature.
* Fixed X, Y and Z IO elements not being included with First Power On record.
* Extended On Stop and On Move periodic timers to maximum value of 7 days.
* Improvements to Static Navigation logic in no GPS situation. 
* New AVL ID 69 value added (4 - no GPS in Static Navigation).
* Improved Recovery mode trigger logic in Lost Sensor scenario.
* Added error code when BLE sensor is lost.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.564'''<br>BlueNRG version: 0.4.12<br>Configurator version: 1.7.74_B.TAT1_R.6</td>
<td style="vertical-align: middle">2024.03.12</td>
<td style="text-align: left; vertical-align: top">
* No changes
</td>
<td style="text-align: left; vertical-align: top">
* Fixed periodic timer starting in Recovery mode.
* Improved backup tracker scan procedure.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''Firmware version: 55.00.16.Rev.562'''<br>BlueNRG version: 0.4.11<br>Configurator version: 1.7.74_B.TAT1_R.6</td>
<td style="vertical-align: middle">2023.12.20</td>
<td style="text-align: left; vertical-align: top">
* Initial release
</td>
<td style="text-align: left; vertical-align: top">
* Initial release
</td>
</tr>
</table>

| TMT250 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.02.03.Rev.05<br>1.7.66 B.55.2 R.10'''</td>
<td style="vertical-align: middle">2024-01-30</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added new AVL ID's SMS events tab
*[FIX] Fixed Online vs Offline configuration discrepancies
*[FIX] Fixed Ultra Deep Sleep naming mismatch
*[FIX] Fixed Tool Tips inaccuracies
*[ADD] Added EYE Sensors support settings and filtering by sensors name and MAC address
*[CHN] Changed device wiki links to teltonika-gps
*[CHN] Moved EYE Sensor I/O settings to Bluetooth 4.0 tab
*[FIX] Fixed Roaming operator/Operator Black List .csv file importing
*[FIX] Fixed Maximum GPS Satellites Quantity parameter (ID: 906) value
*[ADD] Added configurable accelerometer sensitivity settings
*[ADD] Added continuous battery charging mode
*[CHN] Changed minimum BLE scan start period value
</td>
<td style="text-align: left; vertical-align: top">
* [CHN] Added possibility to send SMS AVL ID event to few numbers
* [FIX] Fixed sensors scanning issue, then Beacon Detection is Disabled or set to beacons No Send mode. 
* [ADD] Added CSQ level parameter
* [ADD] Added ''‚ shutdown‘'' SMS/GPRS command to power off device
* [FIX] Added configurable accelerometer sensitivity options in sleep mode
* [FIX] Fixed ''‚btgetlist 3‘'' SMS command
* [FIX] Changed battery voltage measurement and charging algorithm 
* [ADD] Added EYE Sensor support
* [ADD] BLE Sensors Custom field data are displayed in decimal now
* [FIX] Fixed batteries percentage calculation when voltage is Fully charged
* [FIX] Refactored battery percentage limits checking algorithm
* [FIX] Fixed battery charging status 
* [FIX] Fixed BT records generation issue, when BLE devices feature is disabled
* [FIX] Fixed beacon buffer cleanup after the end of BLE scanning or periodic beacon record creation.
* [FIX] Fixed GSM established LED indication turning off issue
* [CHN] Changed minimum BLE scan start period configuration value.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.02.03.Rev 05<br>1.7.66_B.55.2_R.10'''</td>
<td style="vertical-align: middle">2023-12-13</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added new AVL IDs SMS events tab
*[FIX] Fixed Online vs Offline configuration discrepancies
*[FIX] Fixed Ultra Deep Sleep naming mismatch
*[FIX] Fixed Tool Tips inaccuracies
*[ADD] Added EYE sensors support settings and filtering by sensor's'name and MAC address
*[CHN] Changed device wiki links to teltonika-gps
*[CHN] Moved EYE Sensor I/O settings to Bluetooth 4.0 tab.
*[FIX] Fixed Roaming operator/Operator Black list .csv file importing
*[FIX] Fixed Maximum GPS Satellites Quantity parameter (ID: 906) value
*[ADD] Added configurable accelerometer sensitivity settings
*[ADD] Added continuous battery charging mode
*[CHN] Changed minimum BLE scan start period value.
</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added possibility to send SMS AVL ID event to few numbers
*[FIX] Fixed sensors scanning issue, then Beacon Detection is Disabled or set to beacons No Send mode. 
*[ADD] Added CSQ level parameter
*[ADD] Added ‚ shutdown‘ SMS/GPRS command to power off device
*[ADD] Added configurable accelerometer sensitivity options in sleep mode
*[FIX] Fixed ‚btgetlist 3‘ SMS command
*[FIX] Changed battery voltage measurement and charging algorithm 
*[ADD] Added EYE sensor support
*[ADD] BLE sensors Custom field data are displayed in decimal now
*[FIX] Fixed batteries percentage calculation when voltage is Fully charged
*[FIX] Refactored battery percentage limits checking algorithm
*[FIX] Fixed battery charging status 
*[FIX] Fixed BT records generation issue, when BLE devices feature is disabled
*[FIX] Fixed beacon buffer cleanup after the end of BLE scanning or periodic beacon record creation.
*[FIX] Fixed GSM established LED indication turning off issue
*[CHN] Changed minimum BLE scan start period configuration value.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.01.02.Rev.01<br>1.6.11_R.30'''</td>
<td style="vertical-align: middle">2021.10.25</td>
<td style="text-align: left; vertical-align: top">
* Change No Movement/Movement event SMS text 
* Added Race Mode feature
</td>
<td style="text-align: left; vertical-align: top">
* Added Race Mode for GNSS data live tracking 
* Fixed LED indication stuck when Man-Down Cancel button is pressed
* Fixed FW version display in FOTA WEB
* Fixed possibility to configure forbidden GNSS source via SMS or GPRS
* Fixed fake movement events when Low power mode is used
* Fixed BLE scan stuck when Xiaomi bracelet is used
* Fixed restarts when Beacon on Demand feature is used for longer time
* Fixed Alarm call delay issue 
* Fixed FW update issue with XT26G01CWSIGT flash
* Added XT26G01CWSIGT and GD5F1GQ5UE NAND flash support
* Changed minimum charging temperature from -10°C to 1°C
* SMS commands will return time with applied time zone
* The maximum battery charging temperature changed from 50°C to 45°C
* Maximum operating temperature changed from 65°C to 59°C
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.21.Rev.00<br>1.6.11_R.26'''</td>
<td style="vertical-align: middle">2021.08.10 </td>
<td style="text-align: left; vertical-align: top">
* 'Data Acquisition' tool tips and labels changed.
* Changed BLE 'Update frequency' name and tool tips.
* Fixed 'Beacon on demand' labels.
</td>
<td style="text-align: left; vertical-align: top"> 
* Added possibility to Enable or Disable Mandown/Movement/No Movement features while charging.
* Accelerometer and movement detection improvements.
* Fixed invalid SMS number when reporting position after call.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.18.Rev.02<br>1.6.11_R.23'''</td>
<td style="vertical-align: middle">2021.05.13 </td>
<td style="text-align: left; vertical-align: top">
* No changes
</td>
<td style="text-align: left; vertical-align: top"> 
* Fixed issue which occurred during manufactory testing phase with Ver.55.00.18.Rev.01 where device could end with GNSS State = 0
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.18.Rev.01<br>1.6.11_R.23'''</td>
<td style="vertical-align: middle">2021.05.07 </td>
<td style="text-align: left; vertical-align: top">
* Increased Beacon List from 25 to 100
* Added On Demand Tracking On/Off/Switch button action
* Added On Demand Tracking event indication settings
</td>
<td style="text-align: left; vertical-align: top"> 
* Increased Configured beacons count from 25 to 100
* If Beacon record sending is configured to be 'Eventual', send only if device sees any beacons
* Improved Power On/Off feature notifications
* Power save mode is working with Data Acquisition time 60s and above
* On Demand Tracking functionality improved with button control and On Demand Tracking event indication
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.10.Rev.01<br>1.6.11_R.16'''</td>
<td style="vertical-align: middle">2020.11.13 </td>
<td style="text-align: left; vertical-align: top">
*Added Last Known Position feature settings
*Added Power On/Off event settings
*Added Power off with Power key settings
*Added Custom BLE I/O parameters 
</td>
<td style="text-align: left; vertical-align: top"> 
* Added Last Known Position feature on HIGH priority event (alarm, amber alert, man-down, etc).
* When device gains current GPS position after HIGH priority event was generated, device sends another HIGH priority event with updated position and GPS fix timestamp.
* Reworked GNSS status SMS template.
* Fixed issue of data acquisition parameters reset to default values.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.07.Rev.09<br>1.5.15_C.002'''</td>
<td style="vertical-align: middle">2020.10.20 </td>
<td style="text-align: left; vertical-align: top">
*Minor changes
</td>
<td style="text-align: left; vertical-align: top"> 
*Important change of charging algorithm. This algorithm provides higher safety and prolonging battery’s life longevity.
*Corrected battery display in percentage
*Improved charging current from PC.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.07.Rev.07<br>1.5.15_C.002'''</td>
<td style="vertical-align: middle">2020.09.16 </td>
<td style="text-align: left; vertical-align: top">
*Minor changes
</td>
<td style="text-align: left; vertical-align: top"> 
*Lowered battery charging current from wall charger to 425mA.
*Fixed battery LED indication when battery is fully charged.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.07.Rev.02<br>1.5.15_C.002'''</td>
<td style="vertical-align: middle">2020.03.17 </td>
<td style="text-align: left; vertical-align: top">
*Added Man-Down Event On Exit and On Entrance parameters
</td>
<td style="text-align: left; vertical-align: top"> 
*Updated Server IP and Port saving procedures.
*Reworked Generate Event On Exit and On Entrance logic.
*Reworked handheld devices switching between Charging and Normal modes.
*Reworked User ID values scan after device is turn off/on.
*Reworked Button I/O on-click event.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.05.Rev.00<br>1.5.0_C.007'''</td>
<td style="vertical-align: middle">2020.02.13 </td>
<td style="text-align: left; vertical-align: top">
*Removed unnecessary Low Power parameters
*Removed unnecessary Time Synchronization settings
*Implemented On Demand tracking functionality
*Removed unnecessary Number Check Settings panel
*Implemented Event Notification functionality
*Implemented User ID functionality
*Improved BLE beacon functionality
*Implemented Beacon List functionality
*Improved User Interface configuration panel
*Improved Keyboard configuration panel
*Implemented Button IO feature
*Updated default settings
</td>
<td style="text-align: left; vertical-align: top"> 
*Reworked User Interface configuration.
*Reworked Keyboard configuration.
*Implemented Event Notification panel.
*Implemented Call After Answer functionality
*Implemented User ID functionality.
*Implemented On Demand data acquisition functionality.
*Implemented Button IO Feature.
*Optimized wake up from deep sleep by movement.
*Updated default settings.
*Improved BLE compatibility with beacons.
</td>
</tr>
</table>

| GH5200 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
=== Base === 
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.02.03.Rev.05<br>1.7.66 B.55.2 R.10'''</td>
<td style="vertical-align: middle">2024-01-30</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added new AVL ID's SMS events tab
*[FIX] Fixed Online vs Offline configuration discrepancies
*[FIX] Fixed Ultra Deep Sleep naming mismatch
*[FIX] Fixed Tool Tips inaccuracies
*[ADD] Added EYE Sensors support settings and filtering by sensors name and MAC address
*[CHN] Changed device wiki links to teltonika-gps
*[CHN] Moved EYE Sensor I/O settings to Bluetooth 4.0 tab
*[FIX] Fixed Roaming operator/Operator Black List .csv file importing
*[FIX] Fixed Maximum GPS Satellites Quantity parameter (ID: 906) value
*[ADD] Added configurable accelerometer sensitivity settings
*[ADD] Added continuous battery charging mode
*[CHN] Changed minimum BLE scan start period value
</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added possibility to send SMS AVL ID event to few numbers
*[FIX] Fixed sensors scanning issue, then Beacon Detection is Disabled or set to beacons No Send mode.
*[ADD] Added CSQ level parameter
*[FIX] Fixed Event Notification SMS text maximum length
*[ADD] Added ‚ ''shutdown'' SMS/GPRS command to power off device
*[ADD] Added configurable accelerometer sensitivity options in sleep mode
*[FIX] Fixed ''‚btgetlist 3‘'' SMS command
*[FIX] Changed battery voltage measurement and charging algorithm
*[ADD] Added EYE Sensor support
*[ADD] BLE sensors Custom field data are displayed in decimal now
*[FIX] Fixed batteries percentage calculation when voltage is Fully charged
*[ADD] Added ''" dropcall"'' SMS command to hang up the call.
*[ADD] Added call duration limits for Alarm event
*[ADD] Added Call duration limits for each keyboard button
*[FIX] Fixed call and SMS send issue for Feature>>Event notification
*[FIX] Refactored battery percentage limits checking algorithm
*[FIX] Fixed battery charging status
*[FIX] Fixed BT records generation issue, when BLE devices feature is disabled
*[ADD] Added ability to switch audio to Bluetooth headset/speaker with a button.
*[FIX] Fixing issue when incoming call voice audio doesn't work via HFP
*[FIX] AXL and LIS3DH changes to prevent unwanted wake up from sleep mode and prevent fake movement detection
*[FIX] Fixed beacon buffer cleanup after the end of BLE scanning or periodic beacon record creation.
*[FIX] Fixed GSM established LED indication turning off issue
*[CHN] Changed minimum BLE scan start period configuration value.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.02.03.Rev 05<br>1.7.66_B.55.2_R.10'''</td>
<td style="vertical-align: middle">2023-12-13</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added new AVL IDs SMS events tab
*[FIX] Fixed Online vs Offline configuration discrepancies
*[FIX] Fixed Ultra Deep Sleep naming mismatch
*[FIX] Fixed Tool Tips inaccuracies
*[ADD] Added EYE sensors support settings and filtering by sensor's'name and MAC address
*[CHN] Changed device wiki links to teltonika-gps
*[CHN] Moved EYE Sensor I/O settings to Bluetooth 4.0 tab.
*[FIX] Fixed Roaming operator/Operator Black list .csv file importing
*[FIX] Fixed Maximum GPS Satellites Quantity parameter (ID: 906) value
*[ADD] Added configurable accelerometer sensitivity settings
*[ADD]Added events call duration limits
*[ADD]Added call duration limits for keyboard buttons independently.
*[ADD] Added continuous battery charging mode
*[CHN] Changed minimum BLE scan start period value.
</td>
<td style="text-align: left; vertical-align: top">
*[CHN] Added possibility to send SMS AVL ID event to few numbers
*[FIX] Fixed sensors scanning issue, then Beacon Detection is Disabled or set to beacons No Send mode.
*[ADD] Added CSQ level parameter
*[FIX] Fixed Event Notification SMS text maximum length
*[ADD] Added ‚ shutdown‘ SMS/GPRS command to power off device
*[ADD] Added configurable accelerometer sensitivity options in sleep mode
*[FIX] Fixed ‚btgetlist 3‘ SMS command
*[FIX] Changed battery voltage measurement and charging algorithm
*[ADD] Added EYE sensor support
*[ADD] BLE sensors Custom field data are displayed in decimal now
*[FIX] Fixed batteries percentage calculation when voltage is Fully charged
*[ADD] Added " dropcall" SMS command to hang up the call.
*[ADD] Added call duration limits for Alarm event
*[ADD] Added Call duration limits for each keyboard button
*[FIX] Fixed call and SMS send issue for Feature>>Event notification
*[FIX] Refactored battery percentage limits checking algorithm
*[FIX] Fixed battery charging status
*[FIX] Fixed BT records generation issue, when BLE devices feature is disabled
*[ADD] Added ability to switch audio to Bluetooth headset/speaker with a button.
*[FIX] Fixing issue when incoming call voice audio doesn't work via HFP
*[FIX] AXL and LIS3DH changes to prevent unwanted wake up from sleep mode and prevent fake movement detection
*[FIX] Fixed beacon buffer cleanup after the end of BLE scanning or periodic beacon record creation.
*[FIX] Fixed GSM established LED indication turning off issue
*[CHN] Changed minimum BLE scan start period configuration value.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.01.02.Rev.01<br>1.6.11_R.30'''</td>
<td style="vertical-align: middle">2021.10.25</td>
<td style="text-align: left; vertical-align: top">
* Change No Movement/Movement event SMS text
* Added Race Mode feature
</td>
<td style="text-align: left; vertical-align: top">
* Added Race Mode for GNSS data live tracking
* Fixed LED indication stuck when Man-Down Cancel button is pressed
* Fixed FW version display in FOTA WEB
* Fixed possibility to configure forbidden GNSS source via SMS or GPRS
* Fixed fake movement events when Low power mode is used
* Fixed BLE scan stuck when Xiaomi bracelet is used
* Fixed restarts when Beacon on Demand feature is used for longer time
* Fixed Alarm call delay issue
* Fixed FW update issue with XT26G01CWSIGT flash
* Added XT26G01CWSIGT and GD5F1GQ5UE NAND flash support
* Changed minimum charging temperature from -10°C to 1°C
* SMS commands will return time with applied time zone
* The maximum battery charging temperature changed from 50°C to 45°C
* Maximum operating temperature changed from 65°C to 59°C
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.21.Rev.00<br>1.6.11_R.26'''</td>
<td style="vertical-align: middle">2021.08.10</td>
<td style="text-align: left; vertical-align: top">
* Added Tool tips information about Beacon record mode 'No Send'.
* 'Data Acquisition' tool tips and labels changed.
* Changed BLE 'Update frequency' name and tool tips.
* Amber Alert tool tip changes.
* Amber Alert timeout name changed.
</td>
<td style="text-align: left; vertical-align: top">
* Xiaomi Mi Band 2 support.
* Added possibility to Enable or Disable Mandown/Movement/No Movement features while charging.
* Fixed invalid SMS number when reporting position after call.
* Accelerometer improvements.
* Minor changes
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.18.Rev.02<br>1.6.11_R.23'''</td>
<td style="vertical-align: middle">2021.05.13</td>
<td style="text-align: left; vertical-align: top">
* No changes
</td>
<td style="text-align: left; vertical-align: top">
* Fixed issue which occurred during manufactory testing phase with Ver.55.00.18.Rev.01 where device could end with GNSS State = 0
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.18.Rev.01<br>1.6.11_R.23'''</td>
<td style="vertical-align: middle">2021.05.07</td>
<td style="text-align: left; vertical-align: top">
* Increased Beacon List from 25 to 100
* Added On Demand Tracking On/Off/Switch button action
* Added On Demand Tracking event indication settings
* Enabled vibration for Call Active indication.
</td>
<td style="text-align: left; vertical-align: top">
* Increased Configured beacons count from 25 to 100
* If Beacon record sending is configured to be 'Eventual', send only if device sees any beacons
* Improved Power On/Off feature notifications
* Power save mode is working with Data Acquisition time 60s and above
* On Demand Tracking functionality improved with button control and On Demand Tracking event indication
* ManDown functionality was improved with additional sensing methods. First one FreeFall sensing and other FreeFall with Angle combination
* Mandown Cancel button functionality added
* Fixed constant or uncontrolled Battery LED On state
* Added configurable outgoing alarm tone sound
* Added configurable outgoing alarm tone sound
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.13.Rev.00<br>1.6.11_R.18'''</td>
<td style="vertical-align: middle">2021.01.14</td>
<td style="text-align: left; vertical-align: top">
*Added GNSS Fix Holdout settings
*Added Outgoing Call in loudspeaker settings
*Added No movement pre-alarm indication settings
</td>
<td style="text-align: left; vertical-align: top">
*Added Power off button disable feature.
*Special function added: GPS search on hold for 30 seconds.
*Fixed Power on/off event feature.
*Changed Call logic between simultaneous alarms.
*Fixed device Power on from USB, when feature is disabled.
*Added possibility to update GNSS coordinate every 1sec.
*Safe charging improvements.
*Reworked On Demand Tracking.
*Changed Call and SMS logic for Man-Down feature.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.10.Rev.01<br>1.6.11_R.16'''</td>
<td style="vertical-align: middle">2020.11.13</td>
<td style="text-align: left; vertical-align: top">
*Added Last Known Position feature settings
*Added Power On/Off event settings
*Added amber alert feature settings (for GH5200)
*Added Amber alert indication (for GH5200)
*Added Amber alert settings on a keyboard (for GH5200)
*Added Power off with Power key settings
*Added Custom BLE I/O parameters
*Added Man-Down Event On Exit and On Entrance parameters
</td>
<td style="text-align: left; vertical-align: top">
* Added Amber Alert feature with configurable event Timeout and pre-alarm.
* Improved ManDown, AutoGeofence, Alarm button and Amber Alert maximum call list to 10 numbers.
* Changed outgoing call indication to vibration only.
* Added Last Known Position feature on HIGH priority event (alarm, amber alert, man-down, etc.)
* When GH5200 gains current GPS position after HIGH priority event was generated, device sends another HIGH priority event with updated position and GPS fix timestamp.
* Added outgoing call in loudspeaker mode once the call is established.
* Reworked GNSS status SMS template.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.05.Rev.01<br>1.5.0_C.007'''</td>
<td style="vertical-align: middle">2020.03.06</td>
<td style="text-align: left; vertical-align: top">
*Removed unnecessary Low Power parameters
*Removed unnecessary Time Synchronization settings
*Implemented On Demand tracking functionality
*Removed unnecessary Number Check Settings panel
*Implemented Event Notification functionality
*Implemented User ID functionality
*Improved BLE beacon functionality
*Implemented Beacon List functionality
*Improved User Interface configuration panel
*Improved Keyboard configuration panel
*Implemented Button IO feature
*Updated default settings
</td>
<td style="text-align: left; vertical-align: top">
*Reworked factory test tool.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.05.Rev.00<br>1.5.0_C.007'''</td>
<td style="vertical-align: middle">2020.02.13</td>
<td style="text-align: left; vertical-align: top">
*Removed unnecessary Low Power parameters
*Removed unnecessary Time Synchronization settings
*Implemented On Demand tracking functionality
*Removed unnecessary Number Check Settings panel
*Implemented Event Notification functionality
*Implemented User ID functionality
*Improved BLE beacon functionality
*Implemented Beacon List functionality
*Improved User Interface configuration panel
*Improved Keyboard configuration panel
*Implemented Button IO feature
*Updated default settings
</td>
<td style="text-align: left; vertical-align: top">
*Reworked User Interface configuration.
*Reworked Keyboard configuration.
*Implemented Event Notification panel.
*Implemented Call After Answer functionality
*Implemented User ID functionality.
*Implemented On Demand data acquisition functionality.
*Implemented Button IO Feature.
*Optimized wake up from deep sleep by movement.
*Updated default settings.
*Improved BLE compatibility with beacons.
</td>
</tr>
</table>

=== Proximity === 

<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.01.02.Rev.200<br>1.5.15_C.232'''</td>
<td style="vertical-align: middle">2021.11.15</td>
<td style="text-align: left; vertical-align: top">
* Fixed In Use satellites not display issue
* Add missing parameter IDs in tooltips
</td>
<td style="text-align: left; vertical-align: top">
* Added XT26G01CWSIGT and GD5F1GQ5UE NAND flash support
* The maximum battery charging temperature changed from 50°C to 45°C
* Maximum operating temperature changed from 65°C to 59°C
* Fixed Remote Connection indication.
* SMS commands will return time with applied time zone
* Fixed FW version display in FOTA WEB
* Fixed SMS send and Call issue, when GPRS send period is set to 0 sec.
* Changed minimum charging temperature from -10°C to 1°C
* Fixed configuration saving error. Which was happening due FW version change
* Increased BLE scan stability.
</td>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.349<br>1.5.15_C.228'''</td>
<td style="vertical-align: middle">2021.05.07</td>
<td style="text-align: left; vertical-align: top">
* Added configurable Proximity indication pause
* Added option 'Advertise only' for proximity while charging
</td>
<td style="text-align: left; vertical-align: top">
* Added configurable Proximity indication pause.
* Changed default Scan Window and Scan Interval
* Added option 'Advertise only' for proximity while charging
* Corrections for data sending via RUTX
* If Beacon record sending is configured to be 'Eventual', send only if device sees any beacons
</td>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.344<br>1.5.15_C.225'''</td>
<td style="vertical-align: middle">2021.01.14</td>
<td style="text-align: left; vertical-align: top">
*Added Proximity Violator type iBeacon
</td>
<td style="text-align: left; vertical-align: top">
*Improved proximity feature stability.
*Reworked device connection with RUTX.
*Improved proximity advertising scanning stability.
*Safe charging improvements for GH5200.
*Added feature which allows to use Beacons with proximity feature.
*Fixed device Power on from USB, when feature is disabled.
*Proximity improvements to support several devices at the same time.
</td>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.337<br>1.5.15_C.222'''</td>
<td style="vertical-align: middle">2020.10.23</td>
<td style="text-align: left; vertical-align: top">
*Added Proximity with RUTX setting
*Added Proximity RDDI exit threshold setting
*Added Proximity RDDI moving average samples setting
</td>
<td style="text-align: left; vertical-align: top">
*Improved RSSI level calculation logic, averaging according to configurated sample size was implemented.
*Added BLE advertising interval parameter.
*Added duplicate scan filter to improve BLE performance.
</td>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.335<br>1.5.15_C.219'''</td>
<td style="vertical-align: middle">2020.10.09</td>
<td style="text-align: left; vertical-align: top">
*Added Teltonika beaons setting
</td>
<td style="text-align: left; vertical-align: top">
*Improved BLE power level parameters.
*Added Proximity RSSI exit threshold parameter.
*Added Proximity RSSI moving average parameter.
*Reworked generation of Proximity records.
*Changed Proximity record priority from Low to High.
*Reworked Proximity record sending according to Data Acquisition.
</td>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.334<br>1.5.15_C.219'''</td>
<td style="vertical-align: middle">2020.09.28</td>
<td style="text-align: left; vertical-align: top">
*Added Teltonika beaons setting
</td>
<td style="text-align: left; vertical-align: top">
*Added new beacon detection option Teltonika (device only detects Teltonika devices).
*Improved Proximity detection, works with Beacon Detection All and Beacon Detection Teltonika settings.
*Improved Proximity contact duration calculation.
*Improved Beacon detection stability.
</td>

</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.332<br>1.5.15_C.217'''</td>
<td style="vertical-align: middle">2020.09.28</td>
<td style="text-align: left; vertical-align: top">
*Added Home Zone on Exit on entrance settings
</td>
<td style="text-align: left; vertical-align: top">
*Improved Proximity record sending.
*Reworked Home Zone on exit and on entrance event generation.
*Improved Power Off event delay.
*Corrected Power On/Off event logic.
*Reworked Proximity SMS, IMEI is sent instead of BLE MAC
*Proximity Service ID was removed.
</td>

</tr>
</table>

}}
[[Category:{{{model}}}]]