View source for FMB go2sleep

This command supported from 03.27.10.Rev.482 evaluation firmware version, instantly puts device to sleep ignoring going to sleep condition and stays asleep for the set time.<br/><br/>

SMS format: <code>go2sleep:#</code><br/>
'#' – time in minutes<br/><br/> 
Response example: <code>Device will wake up after -> Hours:2 Minutes:25</code><br/><br/>

Sleep mode which the device goes to depends on the device:<br>
*'''FMB965''' and '''FMB930''' devices - '''Power Off sleep'''.<br/>
*All other FMB devices - '''Ultra sleep'''.<br/>
<b>Note !</br>
*'''When putting a device to sleep via this SMS/GPRS command, accelerometer gets turned off as a wake up source, so device won't wake up from ultra or power off sleep due to movement.<br/>'''