View source for Template:FMX E-Mobility Trackers Firmware Changelog

{{#switch: {{{model}}}
| TST100 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.01.10.Rev.00<br>1.6.11 R.39'''</td>
<td style="vertical-align: middle">2022.09.12</td>
<td style="text-align: left; vertical-align: top">
* [ADD]: Added timestamp backup description.
* [CHN]: Corrected misleading and outdated tooltips.
* [ADD]: Added Hergele scooter protocol.
* [ADD]: Added [[TST100_Features_settings#SIM_Card_Tamper_Protection|SIM card tamper protection]] feature.
</td>
<td style="text-align: left; vertical-align: top">
* [FIX]: Fixed BLE Sensor Custom IO SMS sending with value NaN and displaying as ASCII in Configurator.
* [FIX]: Fixed device constantly opening and closing GPRS with permanent link if APN is empty in configurator.
* [FIX]: Fixed permanent link not changing protocol after reconfiguration.
* [CHN]: Updated FOTA WEB protocol ID 0x04 => 0x05
* [FIX]: Increased connection interval in order to speed up connection through BLE terminal.
* [FIX]: Fixed POSI command skipping.
* [FIX]: Fixing network stability issues.
* [FIX]: Fixed timestamp not renewing for Eddystone beacons.
* [FIX]: Added condition to prevent closing socket, if GPRS command is received and response was not sent yet.
* [ADD]: Added [[TST100_Features_settings#SIM_Card_Tamper_Protection|SIM card tamper protection]] feature.
* [ADD]: Added BT whitelist for Solebe lock.
* [ADD]: Hergele scooter support added.
* [CHN]: Increased external queue size to prevent abnormal restarts during BLE scan.
* [FIX]: Fixed a broken GSM connection due to incorrect SIM card selection.
* [ADD]: HeadLight status in Scooter IO added
</td>
</tr>
</table>

| TFT100 = 
<br/>
'''Important:''' Please visit [[Product Maintenance Policy]] for detailed firmware update policy.
<br/>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<th style="width:15%; vertical-align: middle; text-align: center;">VERSION</th>
<th style="width:15%; vertical-align: middle; text-align: center;">RELEASE DATE</th>
<th style="width:35%; vertical-align: middle; text-align: center;">CONFIGURATOR CHANGES</th>
<th style="width:35%; vertical-align: middle; text-align: center;">FIRMWARE CHANGES</th>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.02.03.Rev.06<br> 1.7.66_B.55.2_R.11'''</td>
<td style="vertical-align: middle"> 2024-01-15</td>
<td style="text-align: left; vertical-align: top">
* [ADD] Added CAN Debug feature and CAN Log parameter
* [CHN] Increased DOUT duration limit for Overspeeding, Green Driving, Idling features
* [ADD] Added Odometer parameter for UART, RS232 and RS485
* [REM] Removed CAN and RS485 termination resistor management parameter
* [FIX] Fixed Askoll CAN protocol charge voltage and current I/O parameters visibility, removed malfunction indication I/O
* [FIX] Fixed FLEX CAN protocol parameters duplication
* [ADD] Added Ignition ON Counter feature
* [ADD] Added Separate Manual CAN I/O Reset feature and related parameters
* [CHN] Reduced max sensor size to 64 bytes
* [CHN] Moved Manual CAN baudrate parameter to main CAN I/O section
* [CHN] Changed Manual CAN Settings table and simplified CAN protocol settings
* [CHN] Changed device Wiki links to Teltonika-gps
* [FIX] Fixed BLE Custom I/O Low level maximum value to match valid range by firmware
* [REM] Removed wrong parameter (ID: 740 and 741) tool tips
* [ADD] Added Eye Sensors support
* [FIX] Fixed Roaming/Blacklist CSV file import
* [FIX] Fixed Manual CAN request period max range
* [REM] Removed Manual CAN and Manual J1939 parameters option to leave empty field
* [ADD] Added High resolution vehicle distance and Trip Distance CAN ID and I/O to Default J1939 protocol
* [ADD] Added new Askoll CAN protocol I/O's
* [CHN] Changed Manual CAN Commands interface to table
* [REM] Removed ISO6709 I/O
* [FIX] Fixed Tool Tips inaccuracies
* [FIX] Fixed Online vs Offline configuration discrepancies
* [CHN] Changed Manual CAN I/O and Ignition range Low and High level maximum value range
* [FIX] Fixed J1939 Source Address maximum address to 253
* [FIX] Fixed UART Battery temperature Low level maximum value range
* [FIX] Fixed Ultra Deep Sleep naming mismatch
* [ADD] Added SMS Events functionality
* [FIX] Fixed auto answer (HF) wrong parameter values
* [REM] Removed RS485 Mode selection duplication
</td>
<td style="text-align: left; vertical-align: top">
* [CHN] Increased DOUT duration limit for Overspeeding, Green Driving, Idling features
* [ADD] Added CAN Debug feature
* [CHN] Changed 0% battery level voltage to 3.3V
* [ADD] Added battery percentage level to battery info SMS
* [ADD] Added Ignition ON Counter feature
* [ADD] Added protection against network stuck reset when device is working from battery and immobilizer scenario might be activated
* [CHN] Improved CAN data reading operation for each available CAN protocol
* [ADD] Added CAN chip sleep when external power is not available or device is in Ultra Deep Sleep
* [ADD] Added Separate Manual CAN I/O Reset feature
* [ADD] Added new Askoll CAN I/O's
* [ADD] Added watchdog timer for CAN task
* [CHN] Improved DOUT control during device's boot-up
* [FIX] Fixed incorrect CAN SMS/GPRS AVL response
* [ADD] Added High resolution vehicle distance and Trip Distance CAN ID and I/O to Default J1939 protocol
* [REM] Removed ISO6709 I/O
* [FIX] Fixed ignition detection with power voltage higher than 65V
* [FIX] Fixed CAN and UART I/O low level range values
* [ADD] Added SMS Events functionality
* [FIX] Fixed AVL ID 239 (Ignition) value not updating in records
* [FIX] Fixed Auto Geofence text field parameter resetting after device reboot
* [ADD] Added Eye Sensors support
* [CHN] Changed CAN None protocol operation - CAN is not configured, CAN task suspended
* [CHN] Reduced 1-Wire startup delay after wake up from UDS
* [ADD] Added DIN2 status to getio command
* [FIX] Fixed setdigout speed command when GNSS fix is not available
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.01.10.Rev.00<br>1.6.11 R.39'''</td>
<td style="vertical-align: middle">2022.09.09</td>
<td style="text-align: left; vertical-align: top">
* [CHN]: Changed Default and Minimum CAN Command period. Changed tooltips.
* [ADD]: Add timestamp backup description
* [CHN]: Corrected misleading and outdated tooltips
* [CHN]: Changed TFT100 default configuration.
* [ADD]: Added [[TFT100_CAN_I/O_settings#CAN_I.2FO_reset|CAN I/O reset]] parameter.
* [ADD]: Govecs FLEX (TFT100) changes were merged into 7.0.33 version.
* [ADD]: Added AES128 BLE encryption KEY parameter
* [CHN]: Updated tooltip description for DOUT Deactivation Via DIN
</td>
<td style="text-align: left; vertical-align: top">
* [FIX]: Fixed BLE Sensor Custom IO SMS sending with value NaN and displaying as ASCII in Configurator.
* [FIX]: Fixed device constantly opening and closing GPRS with permanent link if APN is empty in configurator.
* [FIX]: Fixed permanent link not changing protocol after reconfiguration.
* [CHN]: Updated FOTA WEB protocol ID 0x04 => 0x05
* [FIX]: Increased connection interval in order to speed up connection through BLE terminal.
* [FIX]: Fixed POSI command skipping.
* [FIX]: Fixing network stability issues.
* [FIX]: Fixed timestamp not renewing for Eddystone beacons.
* [FIX]: Added condition to prevent closing socket, if GPRS command is received and response was not sent yet.
* [FIX]: Fixed issue, when after pin reconfiguration from DOUT to DIN, DOUT stays ON.
* [FIX]: Fixed periodic CAN command message disabling.
* [FIX]: Fixed Flex CAN protocol reading 0 values after power is cut off.
* [FIX]: Fixed Manual CAN commands periodical sending.
* [CHN]: Changed TFT100 default configuration.
* [CHN]: Increased external queue size to prevent abnormal restarts during BLE scan.
* [ADD]: Added [[TFT100_CAN_I/O_settings#CAN_I.2FO_reset|Reset CAN IO values]] parameter.
* [FIX]: Fixed CAN message sending irregularities.
* [FIX]: Fixed J1939 CAN reading recovery after external power is off.
* [ADD]: Added priority for charger control factory command.
* [FIX]: Fixed a broken GSM connection due to incorrect SIM card selection.
* [FIX]: Fixed FOTA WEB fail when the files requested for download do not exist.
* [FIX]: Fixed lost BLE AES encryption key after reboot.
* [ADD]: Merged Govecs FLEX changes into base. New configuration 7.0.33 created also.
* [FIX]: Fixed DOUT delay after ignition detection.
* [FIX]: Fixed Manual CAN Ignition and Speed I/O‘s timeout issue
* [FIX]: Fixed Manual CAN Speed Source I/O‘s Speed Offset min/max values
* [ADD]: Added AES128 BLE encryption functionality
* [FIX]: Fixed Manual CAN I/O triggers with configured operands
* [FIX]: Fixed GPRS commands sending with TLS encryption
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.01.02.Rev.02<br>1.6.11_R.30'''</td>
<td style="vertical-align: middle">2021.11.03</td>
<td style="text-align: left; vertical-align: top">
* Parameters for Ignition, Speed extraction from manual CAN messages added.
* Added immobilizer functionality which is not dependent on ignition.
* GNSS source parameter mask changed to allow only valid GNSS modes.
* FLEX protcol functionality added.
* Manual CAN Commands functionality moved to separate tab.
* 120 Ohm resistor settings added for CAN, RS485 variants.
* Last know position parameter added.
* PDOP filter parameters added.
</td>
<td style="text-align: left; vertical-align: top">
* Fixed FW up/downgrade for TFT CAN devices with new Flash component.
* SMS commands updated. Commands will return time with time zone applied.
* Fixed minus temperature calculation.
* [[TFT100 System settings#PDOP filter|PDOP filter]] added.
* Movement detection tracking fixed.
* GNSS source parameter only available value can be set.
* Added Backup tracker scenario.
* Added [[TFT100 Manual CAN settings#Manual CAN I.2FO Settings|speed, ignition source]] manual CAN functionality.
* Added immobilizer functionality which is not dependent on ignition.
* Updated Manual CAN IO value dispaly. The value is cleared after configuration changed.
* Added [[TFT100_CAN_I/O_settings#FLEX|FLEX protocol]] support.
* Added a time guard if BLE scan job is stuck.
* Fixed external voltage value representation in battery SMS command response.
* Added [[TFT100_CAN_I/O_settings#120Ohm_Termination_Resistor|120 Ohm resistor support]].
* Added [[TFT100_Features_settings#Last_Known_Position|Last known position]] parameter added.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.14.Rev.00<br>1.6.11_R.19'''</td>
<td style="vertical-align: middle">2021.02.03</td>
<td style="text-align: left; vertical-align: top">
* Parameter order in IO section was updated.
* [[TFT100_System_settings#Timestamp_Backup|Timestamp backup]] functionality added.
* Added possibility to include additional IOs to eventual crash record.
* Added Endianess, Payload and RTR options to Manual CAN settings.
</td>
<td style="text-align: left; vertical-align: top">
* Added possibility to include additional IOs to eventual crash record
* Fixed DOUT state after immobilizer.
* Fixed double iButton scanning issue for immobilizer after sleep.
* Fixed Crash event value.
* Added battery percentage value to the SMS
* Increased compatible beacons count from 25 to 100.
* Fixed memory leak, when the GPS module is turned on and off frequently.
* Timestamp backup functionality added.
* Improved Manual CAN data reading.
* Beacon detection regarding the timestamp for immobilizer functionality, minimal ignition tmo changed to 5s.
* Added ''Request DA'' parameter to Manual J1939 (availability to send request to specific adress).
* Added ''Payload'' and ''RTR'' parameters to Manual CAN (availability to send requests with data).
* Option to start Manual CAN commands on startup was added.
* Added command .can_dbg:<1/0>, which turn on/off the additional CAN debug functionality.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.09.Rev.08<br>1.6.11_R.14'''</td>
<td style="vertical-align: middle">2020.10.16</td>
<td style="text-align: left; vertical-align: top">
* Added BMS2 I/O parameters to Bosch CAN protocol;
* Added DOUT control via Ignition feature;
* Added Manual J1939 protocol;
* Added permanent link with server feature;
* Added Manual CAN commands functionality;
* Added Falldown functionality with autocalibration;
* Added Battery level I/O parameter;
* Added Battery Charge Mode feature;
* Added Beacon selection with Immobilizer feature;
* Added functionality to hide DOUT selection near all features if DIN is selected;
* Added Manual CAN feature;
* Added Default J1939 protocol support with it's I/O parameters.
</td>
<td style="text-align: left; vertical-align: top">
* Added [[TFT100 GPRS settings#Records Settings|permanent link with server]] feature;
* Added [[TFT100 CAN I/O settings#Manual J1939|Manual J1939]] protocol support;
* Improved CAN functionality regarding abnormal restart issue;
* Added [[TFT100 Features settings#DOUT Control Via Ignition|DOUT control via Ignition]] feature;
* Added e-floater (UART) e-scooter support;
* Added BMS2 I/O parameters to [[TFT100_AVL_ID_List#CAN_BOSCH_I.2FO_elements|Bosch CAN protocol]];
* Implemented [[TFT100 SMS/GPRS Commands#CAN Commands|EMCO CAN SMS/GPRS commands]] (used with Manual CAN protocol);
* Improved instant movement calculation in Deep Sleep mode;
* Added [[TFT100 Manual CAN Commands|Manual CAN commands]] functionality;
* Added Govecs e-scooter Bosch protocol lock/unlock/setdigout multi commands;
* Added Govecs e-scooter Bosch protocol lock/unlock/openbox CAN commands;
* Improved Immobilizer functionality with relay;
* Updated Super Soco RS485 SMS response text;
* Added [[TFT100 Features settings#FallDown|Falldown]] functionality with autocalibration;
* Added RS485 restart timeout if no status data is received from Super Soco e-scooter;
* Added [[TFT100 CAN I/O settings#Manual CAN|Manual CAN]] functionality;
* Added [[TFT100 CAN I/O settings#Default J1939|Default J1939]] protocol support;
* Added [[TFT100 SMS/GPRS Commands#CAN Commands|Govecs Schwalbe e-scooter CAN SMS/GPRS commands]] (used with Bosch CAN protocol).
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.08.Rev.03<br>1.5.15_C.003'''</td>
<td style="vertical-align: middle">2020.04.10</td>
<td style="text-align: left; vertical-align: top">
* Optimized Digital Output tool tips;
* Optimized UART panel title to be more accurate;
* Removed duplicated I/O parameters;
* Added RS485 Super Soco protocol;
</td>
<td style="text-align: left; vertical-align: top">
* Added wake up via DIN1 in Ultra Deep Sleep mode functionality;
* Added GoUrban RS485 protocol for Super Soco e-scooter;
* Added new TFT100 hardware support;
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.06.Rev.01<br>1.5.0_C.007'''</td>
<td style="vertical-align: middle">2020.02.07</td>
<td style="text-align: left; vertical-align: top">
* Implemented an option to select Analog Input Value Range;
* Optimized default configuration;
* Added DOUT Control Via Call feature;
* Added iButton Read Notification and Immobilizer feature;
* Added On Demand Tracking feature;
* Added new Ignition Source parameters - Accelerometer, DIN1, Power Voltage, CAN;
* Implemented DIN/DOUT selection ability;
* Added Bosch CAN Powertrain and Askoll protocol selection and I/O's;
* Added TFT100 hardware support;
</td>
<td style="text-align: left; vertical-align: top">
* Optimized Askoll specific commands;
* Optimized CAN chip and NAND SPI Chip select synchronization;
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''55.00.05.Rev.00<br>1.6.11_R.X'''</td>
<td style="vertical-align: middle">2020.01.17</td>
<td style="text-align: left; vertical-align: top">
</td>
<td style="text-align: left; vertical-align: top">
* Optimized iButton Read Notification feature;
* Added DOUT Control Via Call and iButton features;
* Added Immobilizer scenario;
* Added DOUT Control via Call scenario;
* Added new Ignition Source parameters - Accelerometer, DIN1, Power Voltage, CAN;
* Implemented the ability to configure DIN/DOUT;
* Added FOTA WEB support;
* Added Askoll related SMS commands - askoll_unlock, askoll_horn, askoll_tc;
* Optimized data reading through CAN interface;
* Implemented Bosch CAN Powertrain and Askoll protocols;
* Added DOUT protection;
* Added base functionality for all modifications;
* Added TFT100 hardware support;
</td>
</tr>
</table>
}}
[[Category:{{{model}}}]]