View source for Updating your device via Wialon

=Prerequisites for updates via gurtam/wialon:=
Fota application

Open TCP port

Open link: device - server

Firmware matching to your '''branch version'''.

FM36.Ver.01.'''11'''.ZZ.Rev.## -> FM36.Ver.01.'''11'''.ZZ2.Rev.##2

FM36.Ver.01.'''10'''.ZZ.Rev.## -> FM36.Ver.01.'''10'''.ZZ2.Rev.##2

FM36.Ver.01.'''09'''.ZZ.Rev.## -> FM36.Ver.01.'''09'''.ZZ2.Rev.##2

FM36.Ver.01.'''08'''.ZZ.Rev.## -> FM36.Ver.01.'''08'''.ZZ2.Rev.##2

'''''NOTE:''''' ''If the firmware does not match the branch version (this applies to older devices) then the configuration will be deleted from the device. And it will have to be configured with SMS commands or with a PC via USB.''

==Adding the commands to the platform.==
Select a unit, right click it and open properties dialog
[[File:Wialon 01.png|center|thumb|600x600px]]


''NOTE: Make sure that the device is online, this can be seen by the status of the green circle:''
[[File:Wialon 02.png|center|thumb]]


After you have opened the properties, navigate to Commands subsection and click + symbol to add new commands.
[[File:Wialon 03.png|center|thumb|600x600px]]


All new commands are added in the same way and in total there are 4 commands related to the firmware update, they are displayed in the image below.
[[File:Wialon 04.png|center|thumb|600x600px]]
Each command has to be added individually. Instructions provide for each command below.<br />

==Command to get currently uploaded firmware list.==
·        Name the command

·        Select channel: Virtual

·        Select command type: (get_fw_list)
[[File:Wialon 05.png|center|thumb|500x500px]]
<br />

==Command to send the firmware file to Gurtam server.==
·        Name the command

·        Select channel: Virtual

·        Select command type: (send_fw)

Uncheck the field “without parameters” and in the path to firmware file link your firmware file.

'''''Note:''' You can also leave the checkbox "no parameters", in this case You will need to specify the firmware file after clicking on the " OK " button.''
[[File:Wialon 06.png|center|thumb|501x501px]] 

==Command to initiate the firmware update in the device from Gurtam server.==
·        Name the command

·        Select channel: TCP

·        Select command type: (fw_update)
[[File:Wialon 07.png|center|thumb|500x500px]] 

==Command to check firmware update status in the device==
·        Name the command

·        Select channel: Virtual

·        Select command type: (status_fw)
[[File:Wialon 08.png|center|thumb|500x500px]]
<br />

==To update your device first you have to upload the firmware to the Gurtam server.==
Click on the arrow button and choose command to send firmware.
[[File:Wialon 09.png|center|thumb|600x600px]]


In the pop-up window select the command and click ok.
[[File:Wialon 10.png|center|thumb|600x600px]]


If firmware already exists in your Gurtam servers then you will get the window as follows, if not you will receive the notification about the upload of the firmware.
[[File:Wialon 11.png|center|thumb|400x400px]]


You can check what firmwares you have uploaded by choosing the command Get FW list at the step “2”.
[[File:Wialon 12.png|center|thumb|507x507px]] 


==To initiate the update of the firmware==
Should chose Update FW command.

Click on the arrow button and choose command to Update firmware.
[[File:Wialon 13.png|center|thumb|500x500px]]


You have to enter the name of the firmware. And enter your APN details.
[[File:Wialon 14.png|center|thumb|500x500px]]


Once you click ok, firmware update begins. You can check the status by chosing the FW status command.
[[File:Wialon 15.png|center|thumb|500x500px]]
<br />

==Configuration of new devices FMB series through Wialon:==
New devices of the '''FMBXXX''' series can also send a '''configuration''' file and download it from the device using the commands: ''get_cfg, send_cfg''

==Command to get the CFG file to Gurtam server from FMBXXX device.==
·        Name the command

·        Select channel: TCP

·        Select command type: (get_cfg)
[[File:Wialon 16.png|center|thumb|500x500px]]
<br />

==Command to send the CFG file to FMBXXX device from Gurtam server.==
·        Name the command

·        Select channel: TCP

·        Select command type: (send_cfg)
[[File:Wialon 17.png|center|thumb|500x500px]]
<br />

==To get configuration file from your device.==
Click on the arrow button and choose command to get CFG.
[[File:Wialon 18.png|center|thumb|300x300px]]


In the pop-up window select the command and click Next:
[[File:Wialon 19.png|center|thumb|500x500px]]


Enter Wialon IP address, port and your APN:

'''''Note''': If you are not using an APN username/password, enter one space.''
[[File:Wialon 20.png|center|thumb|600x600px]]


Status of successful initiation of configuration download:
[[File:Wialon 21.png|center|thumb|500x500px]]


Status of successful configuration download to the server:
[[File:Wialon 22.png|center|thumb|500x500px]]


To download the configuration file sent from the device, you need to connect to the '''Disketta''' application:

http://apps.wialon.com/

You will find the configuration file in the following way:
[[File:Wialon 23.png|center|thumb|500x500px]]
<br />
==To send configuration file from Wialon server to FMB device.==
Click on the arrow button and choose command to send CFG.
[[File:Wialon 24.png|center|thumb|300x300px]]


In the pop-up window select the command and click Next:
[[File:Wialon 25.png|center|thumb|500x500px]]


Enter Wialon IP address, port and your APN

Select the configuration file you want to send to the device and click OK:
[[File:Wialon 26.png|center|thumb|500x500px]]


Status of successful initiation of configuration send:
[[File:Wialon 27.png|center|thumb|500x500px]]


Status of successful configuration sent to device:
[[File:Wialon 28.png|center|thumb|500x500px]]
<br />