AES128 BLE Encryption testing - Revision history

Ignas.adomaitis: /* AES128 BLE Encryption testing */

2024-09-02T12:15:48Z

AES128 BLE Encryption testing

← Older revision		Revision as of 15:15, 2 September 2024
Line 7:		Line 7:
	If <b>BLE Encryption Key</b> is set, then device will communicate over BLE SPP (Serial Port Profile) with AES cipher mechanism. All incoming and outgoing data will be crypted with <b>AES128</b> algorithm with entered key. Connected to the other side device must have similar encryption method and algorithm <b>BLE Encryption Key</b> is a 16 byte hex coded string.		If <b>BLE Encryption Key</b> is set, then device will communicate over BLE SPP (Serial Port Profile) with AES cipher mechanism. All incoming and outgoing data will be crypted with <b>AES128</b> algorithm with entered key. Connected to the other side device must have similar encryption method and algorithm <b>BLE Encryption Key</b> is a 16 byte hex coded string.
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-gps.com/~~view~~/~~File:~~Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-gps.com/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>

Ignas.adomaitis: /* AES128 BLE Encryption testing */

2024-09-02T12:15:06Z

AES128 BLE Encryption testing

← Older revision		Revision as of 15:15, 2 September 2024
Line 7:		Line 7:
	If <b>BLE Encryption Key</b> is set, then device will communicate over BLE SPP (Serial Port Profile) with AES cipher mechanism. All incoming and outgoing data will be crypted with <b>AES128</b> algorithm with entered key. Connected to the other side device must have similar encryption method and algorithm <b>BLE Encryption Key</b> is a 16 byte hex coded string.		If <b>BLE Encryption Key</b> is set, then device will communicate over BLE SPP (Serial Port Profile) with AES cipher mechanism. All incoming and outgoing data will be crypted with <b>AES128</b> algorithm with entered key. Connected to the other side device must have similar encryption method and algorithm <b>BLE Encryption Key</b> is a 16 byte hex coded string.
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-~~mobility~~.com/~~wikibase/images/b/b8~~/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-gps.com/view/File:Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>

Arnas.Zeb: Text replacement - "Bluetooth®®" to "Bluetooth®"

2023-12-06T12:14:25Z

Text replacement - "Bluetooth®®" to "Bluetooth®"

← Older revision		Revision as of 15:14, 6 December 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth®®~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth®®~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Arnas.Zeb: Text replacement - "Bluetooth" to "Bluetooth®"

2023-12-06T12:08:06Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 15:08, 6 December 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth®~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth®~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth®® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Arnas.Zeb: Text replacement - "Bluetooth" to "Bluetooth®"

2023-12-06T12:05:22Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 15:05, 6 December 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Jonas.sterbavicius: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T13:49:47Z

Text replacement - "Bluetooth®" to "Bluetooth"

← Older revision		Revision as of 16:49, 27 October 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth®~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth®~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Jonas.sterbavicius: Text replacement - "Bluetooth" to "Bluetooth®"

2023-10-27T13:07:56Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 16:07, 27 October 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Jonas.sterbavicius: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T13:07:09Z

Text replacement - "Bluetooth®" to "Bluetooth"

← Older revision		Revision as of 16:07, 27 October 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth®~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth®~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Jonas.sterbavicius: Text replacement - "Bluetooth" to "Bluetooth®"

2023-10-27T12:47:09Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 15:47, 27 October 2023
Line 8:		Line 8:
	<br><br>		<br><br>
	#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>		#For <b>BLE Encryption</b> feature we need to download the [https://wiki.teltonika-mobility.com/wikibase/images/b/b8/Simple_BLE_Terminal.zip Simple BLE Terminal].<br>
	#Using the <b>Teltonika Configurator</b> in <b>~~Bluetooth~~</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]		#Using the <b>Teltonika Configurator</b> in <b>Bluetooth®</b> section, make sure that <b>BT Radio</b> is Enabled (visible). Also in this section <b>Local Name</b> and <b>Local PIN</b> of the device can be seen.<br><br>[[Image:Confblue.png\|700px\|center]]<br><br>[[Image:Confaes128.png\|400px\|right]]
	#Using <b>Teltonika Configurator</b> open <b>~~Bluetooth~~ 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth® 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>

Ignas A. at 05:41, 4 October 2023

2023-10-04T05:41:51Z

← Older revision		Revision as of 08:41, 4 October 2023
Line 11:		Line 11:
	#Using <b>Teltonika Configurator</b> open <b>Bluetooth 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>		#Using <b>Teltonika Configurator</b> open <b>Bluetooth 4.0</b> section and in <b>BLE Encryption Key</b> input field type in the <b>AES Key</b> that you would like to use. <b>BLE Encryption Key</b> have to be a 16 byte hex coded string. Example of <b>AES Key:</b> 00112233445566778899AABBCCDDEEFF.<br><br>[[Image:Scantft.jpg\|300px\|right]]<br><br>
	#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>		#After the configuration of device and download of Simple BLE terminal has been completed, open the app and press scan. Select the device with which you are planning to test the functionality from available devices in BLE devices list:<br><br><br>[[Image:BLE terminal ciphered.png\|300px\|right]]<br>[[Image:AESkey.jpg\|300px\|right]]<br><br><br>
	#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.~~<br><br><br><br><br>[[Image:Commandsent.jpg\|300px\|right]]<br><br><br>~~		#Configure the <b>AES Key</b> in the <b>Simple BLE Terminal</b> by pressing three dots in the top right corner. Use the same <b>AES Key</b>, that have been typed in before into <b>Teltonika Configurator</b>.<br><br><br><br>
	#After the <b>AES Key</b> is configured and device is successfully connected to the <b>Simple BLE Terminal</b>, we can type in the command we want to send adding @sms_run: before the command. For example type in the <b>@sms_run:getstatus</b> command to check if response is received.<br><br><br><br><br>
	{\| class="wikitable" style="border-style: solid; border-width: 0px; width: 1154px;"		{\| class="wikitable" style="border-style: solid; border-width: 0px; width: 1154px;"
	\|+		\|+
Line 19:		Line 18:
	\| style="text-align: left; background: #F6F6FB;" \| '''Encryption Key matching'''		\| style="text-align: left; background: #F6F6FB;" \| '''Encryption Key matching'''
	If the BLE Encryption Key does not match - response to sent command will not be received.		If the BLE Encryption Key does not match - response to sent command will not be received.
	~~\| style="text-align: right; background: #F6F6FB; width:300px;" \| [[Image:Nocommandsnewimg.jpg\|300px]]~~
	\|}		\|}

	[[Category: TFT100 FAQ]]		[[Category: TFT100 FAQ]]