FMB+FMB Backup Tracker - Revision history

Airidas.S: /* Firmware compatibility */

2025-07-17T08:26:00Z

Firmware compatibility

← Older revision		Revision as of 11:26, 17 July 2025
Line 74:		Line 74:

	===Firmware compatibility===		===Firmware compatibility===
	To start working with FMB + FMB functionality '''03.27.13.Rev.~~452~~''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/Compatibility_table_for_FMB_%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.		To start working with FMB + FMB functionality '''04.00.00.Rev.271''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/Compatibility_table_for_FMB_%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.

	===Limitations===		===Limitations===

Airidas.S at 08:25, 17 July 2025

2025-07-17T08:25:16Z

← Older revision		Revision as of 11:25, 17 July 2025
Line 74:		Line 74:

	===Firmware compatibility===		===Firmware compatibility===
	To start working with FMB + FMB functionality '''03.27.13.Rev.452''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/~~Compability_table_for_FMB_~~%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.		To start working with FMB + FMB functionality '''03.27.13.Rev.452''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/Compatibility_table_for_FMB_%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.

	===Limitations===		===Limitations===

Airidas.S at 14:08, 3 December 2024

2024-12-03T14:08:47Z

← Older revision		Revision as of 17:08, 3 December 2024
Line 25:		Line 25:
	[[File:Backup feature logic.png\|1000px]]<br>		[[File:Backup feature logic.png\|1000px]]<br>
	<br>		<br>
	~~'''<big>Packet format</big>'''<br>~~
	~~[[File:Packet format.jpg]]~~

	'''<big>Parameter list</big>'''		'''<big>Parameter list</big>'''

Arnas.Zeb: Text replacement - "Bluetooth" to "Bluetooth®"

2023-12-06T12:07:26Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 15:07, 6 December 2023
Line 79:		Line 79:

	===Limitations===		===Limitations===
	Since the feature relies on ~~Bluetooth~~ functionality, all of the existing ~~Bluetooth~~ limitations are applied.		Since the feature relies on Bluetooth® functionality, all of the existing Bluetooth® limitations are applied.
	One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.		One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.

Line 87:		Line 87:
	* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>		* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>
	[[File:Backup Tracker Ultra Sleep.gif]]		[[File:Backup Tracker Ultra Sleep.gif]]
	* <code>~~Bluetooth~~</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>		* <code>Bluetooth®</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
	[[File:BT ONN.jpg]]<br><br>		[[File:BT ONN.jpg]]<br><br>

	'''Main device:'''		'''Main device:'''
	* <code>~~Bluetooth~~ 4.0</code> → select <code>Main Tracker</code><br>		* <code>Bluetooth® 4.0</code> → select <code>Main Tracker</code><br>
	[[File:MainTracker.PNG]]<br>		[[File:MainTracker.PNG]]<br>
	<br>		<br>
	'''Backup device:'''		'''Backup device:'''
	* <code>~~Bluetooth~~ 4.0</code> → select <code>Backup Tracker</code><br>		* <code>Bluetooth® 4.0</code> → select <code>Backup Tracker</code><br>
	* Enter main device IMEI (15 digits)<br>		* Enter main device IMEI (15 digits)<br>
	* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.		* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.

Jonas.sterbavicius: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T15:39:34Z

Text replacement - "Bluetooth®" to "Bluetooth"

← Older revision		Revision as of 18:39, 27 October 2023
Line 79:		Line 79:

	===Limitations===		===Limitations===
	Since the feature relies on ~~Bluetooth®~~ functionality, all of the existing ~~Bluetooth®~~ limitations are applied.		Since the feature relies on Bluetooth functionality, all of the existing Bluetooth limitations are applied.
	One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.		One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.

Line 87:		Line 87:
	* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>		* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>
	[[File:Backup Tracker Ultra Sleep.gif]]		[[File:Backup Tracker Ultra Sleep.gif]]
	* <code>~~Bluetooth®~~</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>		* <code>Bluetooth</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
	[[File:BT ONN.jpg]]<br><br>		[[File:BT ONN.jpg]]<br><br>

	'''Main device:'''		'''Main device:'''
	* <code>~~Bluetooth®~~ 4.0</code> → select <code>Main Tracker</code><br>		* <code>Bluetooth 4.0</code> → select <code>Main Tracker</code><br>
	[[File:MainTracker.PNG]]<br>		[[File:MainTracker.PNG]]<br>
	<br>		<br>
	'''Backup device:'''		'''Backup device:'''
	* <code>~~Bluetooth®~~ 4.0</code> → select <code>Backup Tracker</code><br>		* <code>Bluetooth 4.0</code> → select <code>Backup Tracker</code><br>
	* Enter main device IMEI (15 digits)<br>		* Enter main device IMEI (15 digits)<br>
	* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.		* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.

Jonas.sterbavicius: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T13:47:10Z

Text replacement - "Bluetooth®" to "Bluetooth"

← Older revision		Revision as of 16:47, 27 October 2023
Line 79:		Line 79:

	===Limitations===		===Limitations===
	Since the feature relies on ~~Bluetooth®®~~ functionality, all of the existing ~~Bluetooth®®~~ limitations are applied.		Since the feature relies on Bluetooth® functionality, all of the existing Bluetooth® limitations are applied.
	One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.		One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.

Line 87:		Line 87:
	* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>		* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>
	[[File:Backup Tracker Ultra Sleep.gif]]		[[File:Backup Tracker Ultra Sleep.gif]]
	* <code>~~Bluetooth®®~~</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>		* <code>Bluetooth®</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
	[[File:BT ONN.jpg]]<br><br>		[[File:BT ONN.jpg]]<br><br>

	'''Main device:'''		'''Main device:'''
	* <code>~~Bluetooth®®~~ 4.0</code> → select <code>Main Tracker</code><br>		* <code>Bluetooth® 4.0</code> → select <code>Main Tracker</code><br>
	[[File:MainTracker.PNG]]<br>		[[File:MainTracker.PNG]]<br>
	<br>		<br>
	'''Backup device:'''		'''Backup device:'''
	* <code>~~Bluetooth®®~~ 4.0</code> → select <code>Backup Tracker</code><br>		* <code>Bluetooth® 4.0</code> → select <code>Backup Tracker</code><br>
	* Enter main device IMEI (15 digits)<br>		* Enter main device IMEI (15 digits)<br>
	* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.		* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.

Jonas.sterbavicius: Text replacement - "Bluetooth" to "Bluetooth®"

2023-10-27T13:07:31Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 16:07, 27 October 2023
Line 79:		Line 79:

	===Limitations===		===Limitations===
	Since the feature relies on ~~Bluetooth®~~ functionality, all of the existing ~~Bluetooth®~~ limitations are applied.		Since the feature relies on Bluetooth®® functionality, all of the existing Bluetooth®® limitations are applied.
	One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.		One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.

Line 87:		Line 87:
	* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>		* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>
	[[File:Backup Tracker Ultra Sleep.gif]]		[[File:Backup Tracker Ultra Sleep.gif]]
	* <code>~~Bluetooth®~~</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>		* <code>Bluetooth®®</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
	[[File:BT ONN.jpg]]<br><br>		[[File:BT ONN.jpg]]<br><br>

	'''Main device:'''		'''Main device:'''
	* <code>~~Bluetooth®~~ 4.0</code> → select <code>Main Tracker</code><br>		* <code>Bluetooth®® 4.0</code> → select <code>Main Tracker</code><br>
	[[File:MainTracker.PNG]]<br>		[[File:MainTracker.PNG]]<br>
	<br>		<br>
	'''Backup device:'''		'''Backup device:'''
	* <code>~~Bluetooth®~~ 4.0</code> → select <code>Backup Tracker</code><br>		* <code>Bluetooth®® 4.0</code> → select <code>Backup Tracker</code><br>
	* Enter main device IMEI (15 digits)<br>		* Enter main device IMEI (15 digits)<br>
	* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.		* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.

Jonas.sterbavicius: Text replacement - "Bluetooth" to "Bluetooth®"

2023-10-27T13:03:26Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 16:03, 27 October 2023
Line 79:		Line 79:

	===Limitations===		===Limitations===
	Since the feature relies on ~~Bluetooth~~ functionality, all of the existing ~~Bluetooth~~ limitations are applied.		Since the feature relies on Bluetooth® functionality, all of the existing Bluetooth® limitations are applied.
	One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.		One of such limitations is the fact that FMB devices only store up to 100 BLE devices per scan. This means, that if there are more than 100 BLE devices in the surrounding environment, backup tracker being able to catch main tracker packets in time gets reduced.

Line 87:		Line 87:
	* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>		* Make sure <code>Ultra Sleep</code> mode → <code>Disabled</code>
	[[File:Backup Tracker Ultra Sleep.gif]]		[[File:Backup Tracker Ultra Sleep.gif]]
	* <code>~~Bluetooth~~</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>		* <code>Bluetooth®</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
	[[File:BT ONN.jpg]]<br><br>		[[File:BT ONN.jpg]]<br><br>

	'''Main device:'''		'''Main device:'''
	* <code>~~Bluetooth~~ 4.0</code> → select <code>Main Tracker</code><br>		* <code>Bluetooth® 4.0</code> → select <code>Main Tracker</code><br>
	[[File:MainTracker.PNG]]<br>		[[File:MainTracker.PNG]]<br>
	<br>		<br>
	'''Backup device:'''		'''Backup device:'''
	* <code>~~Bluetooth~~ 4.0</code> → select <code>Backup Tracker</code><br>		* <code>Bluetooth® 4.0</code> → select <code>Backup Tracker</code><br>
	* Enter main device IMEI (15 digits)<br>		* Enter main device IMEI (15 digits)<br>
	* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.		* Set <b>Update frequency</b> to how frequent you want backup tracker to scan.

Maksim.Volodascik at 12:24, 14 July 2023

2023-07-14T12:24:22Z

← Older revision		Revision as of 15:24, 14 July 2023
Line 76:		Line 76:

	===Firmware compatibility===		===Firmware compatibility===
	To start working with FMB + FMB functionality '''03.29.00.Rev.00''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/Compability_table_for_FMB_%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.		To start working with FMB + FMB functionality '''03.27.13.Rev.452''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/Compability_table_for_FMB_%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.

	===Limitations===		===Limitations===

Maksim.Volodascik at 12:14, 14 July 2023

2023-07-14T12:14:46Z

← Older revision		Revision as of 15:14, 14 July 2023
Line 74:		Line 74:
	\|-		\|-
	\|}		\|}

			===Firmware compatibility===
			To start working with FMB + FMB functionality '''03.29.00.Rev.00''' firmware or newer will be required to be used. You can check what devices are compatible with using this firmware on [https://wiki.teltonika-gps.com/view/Compability_table_for_FMB_%2B_FMB_backup_tracking '''Compability table for FMB + FMB backup tracking'''] page.

	===Limitations===		===Limitations===
	Since the feature relies on Bluetooth functionality, all of the existing Bluetooth limitations are applied.		Since the feature relies on Bluetooth functionality, all of the existing Bluetooth limitations are applied.