FMB630 Tachograph Data - Revision history

Airidas.S at 05:44, 17 October 2019

2019-10-17T05:44:19Z

← Older revision		Revision as of 08:44, 17 October 2019
Line 247:		Line 247:
	https://wiki.teltonika-gps.com/view/FM63_firmware_errata<br />		https://wiki.teltonika-gps.com/view/FM63_firmware_errata<br />
	https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br />		https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br />
	[[Category:FMB630 ~~Advanced~~ Configuration]]		[[Category:FMB630 Configuration]]

Aurimas.vanagas at 10:43, 3 September 2019

2019-09-03T10:43:22Z

← Older revision		Revision as of 13:43, 3 September 2019
Line 1:		Line 1:
	==Tachograph Data==		==Tachograph Data==
	<br>		<br>
	Tachograph data can be taken from Tachograph via K-Line, ALLCAN, Tacho CAN or FMS. Data here is constantly refreshed. As the other element's windows, this one also has all the options to configure event generating. For example if you have FMB6 connected to FMS and K-line and you wish to get data about "Driver 1 Card" from K-line set the K-line priority to 1 and FMS priority to 2 or disable this interface.		Tachograph data can be taken from Tachograph via K-Line, ALLCAN, Tacho CAN or FMS. Data here is constantly refreshed. As the other element's windows, this one also has all the options to configure event generating. For example if you have FMB6 connected to FMS and K-line and you wish to get data about "Driver 1 Card" from K-line set the K-line priority to 1 and FMS priority to 2 or disable this interface.
			Priority parameter values can be found on [[FMB630_Device_Family_Parameter_list#Tachograph_Priority_Parameters\|This Page.]]

Aurimas.vanagas at 10:38, 3 September 2019

2019-09-03T10:38:05Z

← Older revision		Revision as of 13:38, 3 September 2019
Line 1:		Line 1:
	==Tachograph Data==		==Tachograph Data==
	<br>		<br>
	Tachograph data can be taken from Tachograph via K-Line, ALLCAN, Tacho CAN or FMS. Data here is constantly refreshed. As the other element's windows, this one also has all the options to configure event generating.		Tachograph data can be taken from Tachograph via K-Line, ALLCAN, Tacho CAN or FMS. Data here is constantly refreshed. As the other element's windows, this one also has all the options to configure event generating. For example if you have FMB6 connected to FMS and K-line and you wish to get data about "Driver 1 Card" from K-line set the K-line priority to 1 and FMS priority to 2 or disable this interface.

Aurimas.vanagas at 10:37, 3 September 2019

2019-09-03T10:37:18Z

← Older revision		Revision as of 13:37, 3 September 2019
Line 220:		Line 220:

	===Tachograph Data front panel supported with Firmware version 01.00.xx ===		===Tachograph Data front panel supported with Firmware version 01.00.xx ===

			After firmware 01.00.xx release there is a list of parameters that were moved from FMS to "Tachograph Data".
			FMS -> Tachograph Data:
			<br>
			* Vehicle Identification Number -> VIN<br>
			* Vhicle Motion -> Drive recognize<br>
			* Driver 1 working state -> Driver 1 working state<br>
			* Driver 2 working state -> Driver 2 working state <br>
			* Driver 1 time related states -> Driver 1 time related states<br>
			* Driver 2 time related states -> Driver 2 time related states<br>
			* Driver 1 card -> Driver 1 card<br>
			* Driver 2 card -> Driver 2 card<br>
			* Tachograph vehicle speed -> Vehicle Speed<br>
			* Driver 1 identification -> Driver 1 identification number<br>
			* Driver 2 identification -> Driver 2 identification number<br>
			* High resolution total vehicle distance ->Odometer<br>
			<br>
			{\|
			\|-
			\| [[File:Alert.png\|left\|link=]] \|\| <b>
			In previous firmware's K-line and "Tachograph Data" were saved and sent as a different record. In this firmware the "Tachograph Data" will be saved as regular record, meaning that you will get all the data along with I/O elements in one record. The "Tachograph Data" will be saved on configured event or according to "Min Period" in "Data acquisition" tab.</b>
			\|}

	==External links==		==External links==

Sandra.Gasyte: Protected "FMB630 Tachograph Data" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2019-08-28T12:57:06Z

Protected "FMB630 Tachograph Data" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision	Revision as of 15:57, 28 August 2019
(No difference)

212.59.13.226 at 12:44, 28 August 2019

2019-08-28T12:44:37Z

← Older revision		Revision as of 15:44, 28 August 2019
Line 9:		Line 9:
	<br>		<br>

	~~---------------------------~~
	To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.		To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
	For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]		For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]

212.59.13.226 at 12:44, 28 August 2019

2019-08-28T12:44:20Z

← Older revision		Revision as of 15:44, 28 August 2019
Line 9:		Line 9:
	<br>		<br>

			---------------------------
	To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.		To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
	For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]		For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]

Aurimas.vanagas: /* Tachograph Data */

2019-07-22T07:44:40Z

Tachograph Data

Show changes

Aurimas.vanagas: /* Tachograph Data front panel supported on Firmware version 01.00.xx */

2019-07-15T08:31:16Z

Tachograph Data front panel supported on Firmware version 01.00.xx

← Older revision		Revision as of 11:31, 15 July 2019
Line 10:		Line 10:
	For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]		For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]

	===Tachograph Data front panel supported on Firmware version 01.00.xx ===		===Tachograph Data front panel supported with Firmware version 01.00.xx ===

	==External links==		==External links==

Aurimas.vanagas at 08:30, 15 July 2019

2019-07-15T08:30:52Z

← Older revision		Revision as of 11:30, 15 July 2019
Line 10:		Line 10:
	For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]		For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution\|This Page.]]

	===Tachograph Data front panel supported ~~from~~ Firmware version 01.00.xx ===		===Tachograph Data front panel supported on Firmware version 01.00.xx ===

	==External links==		==External links==