FMB640 ContiPressureCheck - Revision history

Sandra.Gasyte at 16:26, 29 January 2021

2021-01-29T16:26:34Z

← Older revision		Revision as of 19:26, 29 January 2021
Line 19:		Line 19:
	[[Image:TPMS Data protocol.png]]		[[Image:TPMS Data protocol.png]]

	To get current [[~~FMB640_AVL_ID~~#ContiPressureCheck_TPMS\|TPMS IO elements]], they should be enabled in ''ContiPressureCheck''. Also, after that, you will need to set [[FMB640_Data_acquisition_settings\|Data saving period]] which means how often the device should save values from sensors		To get current [[FMB640_Teltonika_Data_Sending_Parameters_ID#ContiPressureCheck_TPMS\|TPMS IO elements]], they should be enabled in ''ContiPressureCheck''. Also, after that, you will need to set [[FMB640_Data_acquisition_settings\|Data saving period]] which means how often the device should save values from sensors

	[[Image:TPMS IO settings.png]]		[[Image:TPMS IO settings.png]]

Jonas.sterbavicius: Reverted edits by Sterbavicius.jo (talk) to last revision by SandraG

2020-07-22T14:17:25Z

Reverted edits by Sterbavicius.jo (talk) to last revision by SandraG

← Older revision		Revision as of 17:17, 22 July 2020
Line 1:		Line 1:
	===Description===		__TOC__

			==Description==

			[[FMB640]] device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns, and extended tire lifespan. <br>
			'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. [[FMB640]] connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding about every tire pressure, temperature and faults.'''

			[[image:TMPS_iliustracija_V1.0.png]]

	FMB640 device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns and extended tire lifespan. <br>
	'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. FMB640 connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding every tire.'''
	Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>		Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>

	The data is gathered from CAN interface: a total number of tires controlled, the total number of ~~the axle~~, graphical position, and information regarding every tire. TPMS period affects only record saving. TPMS ~~records will~~ be ~~sent together with base AVL records~~. ~~For more information about Continental TPMS~~, ~~please check~~ the ~~link provided below~~: ~~<br>~~		The data is gathered from CAN interface: a total number of tires controlled, the total number of axles, graphical position, and information regarding every tire. TPMS period affects only record saving.<br>
	~~https://www~~.~~continental-tires~~.~~com/transport/products/overview-product-lines/contipressurecheck/about~~		<br>[[image:FMB640_ContiPressureCheck.png]]
	~~<br><br>~~
	[[~~image~~:~~FMB640_TPMS.PNG~~.png]]		==Configuration==

			To get data from TPMS sensors, in [[FMB640_System_settings\|System settings]] choose [[Teltonika_Data_Sending_Protocols#Codec_8\|Codec 8]] Extended as [[FMB640_System_settings#Protocol_Settings\|Data protocol]].

			[[Image:TPMS Data protocol.png]]

			To get current [[FMB640_AVL_ID#ContiPressureCheck_TPMS\|TPMS IO elements]], they should be enabled in ''ContiPressureCheck''. Also, after that, you will need to set [[FMB640_Data_acquisition_settings\|Data saving period]] which means how often the device should save values from sensors

			[[Image:TPMS IO settings.png]]

			Continental TPMS data is read from the FMS CAN bus lines. Please choose one option (CAN1 or CAN2) which will be used in ''ContiPressureCheck''.

			[[Image:Continental_Tire_Pressure_Check_CAN_source.png]]

	~~===Configuration===~~		If you have [[FMB640]] CAN1 bus lines connected to FMS, in [[FMB640_CAN_\_Tachograph\|CAN / Tachograph settings]] CAN1 bus mode must be set to NORMAL and Baud rate - 250kbps. If you have [[FMB640]] CAN2 bus lines connected to FMS, the CAN2 Baud rate must be set to 250kbps.

	~~Continental “ContiPressureCheck” is read from the FMS~~ CAN bus ~~lines, thus if you have FMB640 CAN1 bus lines connected to FMS, CAN1 bus mode must be set to NORMAL~~.		[[Image:CAN bus settings.png]]

	~~[[image~~:~~TPMScfg~~.~~png]]~~		==External Links==
			https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about

	[[Category:FMB640 Configuration]]		[[Category:FMB640 Configuration]]

Jonas.sterbavicius: Reverted edits by SandraG (talk) to last revision by Airidas.S

2020-05-22T14:16:55Z

Reverted edits by SandraG (talk) to last revision by Airidas.S

← Older revision		Revision as of 17:16, 22 May 2020
Line 1:		Line 1:
	~~__TOC__~~		===Description===

	==Description==

	[[FMB640]] device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns, and extended tire lifespan. <br>
	'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. [[FMB640]] connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding about every tire pressure, temperature and faults.'''

	~~[[image:TMPS_iliustracija_V1.0.png]]~~

			FMB640 device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns and extended tire lifespan. <br>
			'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. FMB640 connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding every tire.'''
	Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>		Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>

	The data is gathered from CAN interface: a total number of tires controlled, the total number of ~~axles~~, graphical position, and information regarding every tire. TPMS period affects only record saving.<br>		The data is gathered from CAN interface: a total number of tires controlled, the total number of the axle, graphical position, and information regarding every tire. TPMS period affects only record saving. TPMS records will be sent together with base AVL records. For more information about Continental TPMS, please check the link provided below: <br>
	~~<br>[[image~~:~~FMB640_ContiPressureCheck~~.~~png]]~~		https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about
			<br><br>
	~~==Configuration==~~		[[image:FMB640_TPMS.PNG.png]]

	To get data from TPMS sensors, in [[FMB640_System_settings\|System settings]] choose [[Teltonika_Data_Sending_Protocols#Codec_8\|Codec 8]] Extended as [[FMB640_System_settings#Protocol_Settings\|Data protocol]].

	[[~~Image~~:~~TPMS Data protocol~~.~~png]]~~

	To get current [[FMB640_AVL_ID#ContiPressureCheck_TPMS\|TPMS IO elements]], they should be enabled in ''ContiPressureCheck''. Also, after that, you will need to set [[FMB640_Data_acquisition_settings\|Data saving period]] which means how often the device should save values from sensors

	~~[[Image:TPMS IO settings~~.png]]

	~~Continental TPMS data is read from the FMS CAN bus lines. Please choose one option (CAN1 or CAN2) which will be used in ''ContiPressureCheck''.~~

	~~[[Image:Continental_Tire_Pressure_Check_CAN_source.png]]~~		===Configuration===

	If you have [[FMB640]] CAN1 bus lines connected to FMS, ~~in [[FMB640_CAN_\_Tachograph\|CAN / Tachograph settings]]~~ CAN1 bus mode must be set to NORMAL ~~and Baud rate - 250kbps. If you have [[FMB640]] CAN2 bus lines connected to FMS, the CAN2 Baud rate must be set to 250kbps~~.		Continental “ContiPressureCheck” is read from the FMS CAN bus lines, thus if you have FMB640 CAN1 bus lines connected to FMS, CAN1 bus mode must be set to NORMAL.

	[[~~Image~~:~~CAN bus settings~~.png]]		[[image:TPMScfg.png]]

	~~==External Links==~~
	~~https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about~~

	[[Category:FMB640 Configuration]]		[[Category:FMB640 Configuration]]

Sandra.Gasyte at 08:24, 21 May 2020

2020-05-21T08:24:02Z

← Older revision		Revision as of 11:24, 21 May 2020
Line 33:		Line 33:
	==External Links==		==External Links==
	https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about		https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about

			[[Category:FMB640 Configuration]]

Sandra.Gasyte at 11:06, 20 May 2020

2020-05-20T11:06:43Z

← Older revision		Revision as of 14:06, 20 May 2020
Line 1:		Line 1:
	===Description===		__TOC__

			==Description==

			[[FMB640]] device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns, and extended tire lifespan. <br>
			'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. [[FMB640]] connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding about every tire pressure, temperature and faults.'''

			[[image:TMPS_iliustracija_V1.0.png]]

	FMB640 device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns and extended tire lifespan. <br>
	'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. FMB640 connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding every tire.'''
	Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>		Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>

	The data is gathered from CAN interface: a total number of tires controlled, the total number of ~~the axle~~, graphical position, and information regarding every tire. TPMS period affects only record saving. ~~TPMS records will be sent together with base AVL records. For more information about Continental TPMS, please check the link provided below:~~ <br>		The data is gathered from CAN interface: a total number of tires controlled, the total number of axles, graphical position, and information regarding every tire. TPMS period affects only record saving.<br>
	~~https~~:~~//www~~.~~continental-tires~~.~~com/transport/products/overview-product-lines/contipressurecheck/about~~		<br>[[image:FMB640_ContiPressureCheck.png]]
	~~<br><br>~~
	[[~~image~~:~~FMB640_TPMS~~.~~PNG~~.png]]		==Configuration==

			To get data from TPMS sensors, in [[FMB640_System_settings\|System settings]] choose [[Teltonika_Data_Sending_Protocols#Codec_8\|Codec 8]] Extended as [[FMB640_System_settings#Protocol_Settings\|Data protocol]].

			[[Image:TPMS Data protocol.png]]

			To get current [[FMB640_AVL_ID#ContiPressureCheck_TPMS\|TPMS IO elements]], they should be enabled in ''ContiPressureCheck''. Also, after that, you will need to set [[FMB640_Data_acquisition_settings\|Data saving period]] which means how often the device should save values from sensors

			[[Image:TPMS IO settings.png]]

			Continental TPMS data is read from the FMS CAN bus lines. Please choose one option (CAN1 or CAN2) which will be used in ''ContiPressureCheck''.

	~~===Configuration===~~		[[Image:Continental_Tire_Pressure_Check_CAN_source.png]]

	~~Continental “ContiPressureCheck” is read from the FMS CAN bus lines, thus if~~ you have FMB640 CAN1 bus lines connected to FMS, CAN1 bus mode must be set to NORMAL.		If you have [[FMB640]] CAN1 bus lines connected to FMS, in [[FMB640_CAN_\_Tachograph\|CAN / Tachograph settings]] CAN1 bus mode must be set to NORMAL and Baud rate - 250kbps. If you have [[FMB640]] CAN2 bus lines connected to FMS, the CAN2 Baud rate must be set to 250kbps.

	[[~~image~~:~~TPMScfg~~.png]]		[[Image:CAN bus settings.png]]

	~~[[Category~~:~~FMB640 Configuration]]~~		==External Links==
			https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about

Sandra.Gasyte: Protected "FMB640 ContiPressureCheck" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2020-04-02T19:35:05Z

Protected "FMB640 ContiPressureCheck" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision	Revision as of 22:35, 2 April 2020
(No difference)

Airidas.S at 09:24, 31 January 2020

2020-01-31T09:24:12Z

← Older revision		Revision as of 12:24, 31 January 2020
Line 8:		Line 8:
	https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about		https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about
	<br><br>		<br><br>
	[[image:~~FMB640 TPMS~~.PNG]]		[[image:FMB640_TPMS.PNG.png]]

	===Configuration===		===Configuration===

VDOMB at 09:15, 31 January 2020

2020-01-31T09:15:49Z

← Older revision		Revision as of 12:15, 31 January 2020
Line 8:		Line 8:
	https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about		https://www.continental-tires.com/transport/products/overview-product-lines/contipressurecheck/about
	<br><br>		<br><br>
	[[image:~~FMB640_TPMS~~.~~png~~]]		[[image:FMB640 TPMS.PNG]]

	===Configuration===		===Configuration===

Agafonov.ro at 12:19, 24 January 2020

2020-01-24T12:19:53Z

← Older revision		Revision as of 15:19, 24 January 2020
Line 2:		Line 2:

	FMB640 device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns and extended tire lifespan. <br>		FMB640 device is able to read data from the Continental “ContiPressureCheck” tire pressure monitoring system. This solution provides you with live data about the state of the tires in your fleet, therefore helping you to make decisions that will lead to better fuel economy, reduced tire-related breakdowns and extended tire lifespan. <br>
	The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. FMB640 connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding every tire.		'''The pressure sensors are mounted inside the Continental tire ensuring accurate information that is sent to the Central Control Unit. FMB640 connects to this unit via the CAN line and can read data about the total number of tires controlled, the total number of axles, graphical position, and information regarding every tire.'''
	Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>		Different fleets have different information priorities. “ContiPressureCheck” data is saved as a separate record. You are able to set how often the device saves this information by configuring the data reading period. This ensures that you will save data traffic costs and get the information that you need as often as you need it. <br>

Kudalevas.da at 06:03, 21 October 2019

2019-10-21T06:03:14Z

← Older revision		Revision as of 09:03, 21 October 2019
Line 15:		Line 15:

	[[image:TPMScfg.png]]		[[image:TPMScfg.png]]

			[[Category:FMB640 Configuration]]