FMB setdigout - Revision history

Martyna.D at 10:44, 27 March 2023

2023-03-27T10:44:18Z

← Older revision		Revision as of 13:44, 27 March 2023
Line 1:		Line 1:
	Sets digital outputs to ON or OFF state.<br/>		Sets digital outputs to <b>ON</b> or <b>OFF</b> state.<br/>
	SMS format: ~~setdigout XY~~ <~~timeoutX> <timeoutY> <speedX~~> <~~speedY~~>		SMS format: <code>setdigout ## <timeoutY1> <timeoutY2> <speedZ1> <speedZ2></code>
	<~~br/~~><~~br/~~>
	~~Both, timeout and speed arguments are not mandatory and do not have to be included in the message.~~<~~br/~~>
	~~Timeout argument determines how long the state will be held.~~<br/>
	~~Speed argument determines the maximum speed threshold allowing command execution. If speed is higher than this threshold, command will be queued and executed when speed drops bellow this threshold.~~
	<br/><br/>		<br/><br/>
			Set digital output:<br>
			1. # – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1.<br>
			2. # – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2.<br>
			Y1 – timeout value for DOUT1 if needed (in seconds).<br>
			Y2 – timeout value for DOUT2 if needed (in seconds).<br>
			Z1 – maximum speed value for DOUT1 if needed.<br>
			Z2 – maximum speed value for DOUT2 if needed. <br><br>
			<b>Note!</b>
			*Both, timeout and speed arguments are not mandatory and do not have to be included in the message.
			*Timeout argument determines how long the state will be held.
			*Speed argument determines the maximum speed threshold allowing command execution. If speed is higher than this threshold, command will be queued and executed when speed drops bellow this threshold.
			<br/>

	'''In order to leave state/timeout/speed unchanged, "?" symbol can be used:<br/>'''		'''In order to leave state/timeout/speed unchanged, "?" symbol can be used:<br/>'''
	Example:<~~br/~~>"setdigout ?1" will leave DOUT1 state unchanged and set DOUT2 to high level for infinite time.		Example: <code>setdigout ?1</code><br> will leave DOUT1 state unchanged and set DOUT2 to high level for infinite time.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 01 ? 60" will set DOUT1 to low level for infinite time and DOUT2 to high level for 60 seconds.		Example: <code>setdigout 01 ? 60</code> <br>will set DOUT1 to low level for infinite time and DOUT2 to high level for 60 seconds.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 01 30 ? ? 30" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for infinite time if speed is 30 km/h or lower.		Example: <code>setdigout 01 30 ? ? 30</code> <br>will set DOUT1 to low level for 30 seconds and DOUT2 to high level for infinite time if speed is 30 km/h or lower.
	<br/><br/>		<br/><br/>

	'''For devices with 1 digital output:<br>'''		'''For devices with 1 digital output:<br>'''
	Example:<~~br/~~>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.		Example: <code>setdigout 1 45</code><br> will set DOUT1 to high level for 45 seconds.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 1 30 20" will set DOUT1 to high level for 30 seconds if speed is 20 km/h or lower.		Example: <code>setdigout 1 30 20</code><br> will set DOUT1 to high level for 30 seconds if speed is 20 km/h or lower.
	<br/><br/>		<br/><br/>

	'''For devices with 2 digital outputs:<br>'''		'''For devices with 2 digital outputs:<br>'''
	Example:<~~br/~~>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.		Example: <code>setdigout 11</code><br> will set DOUT1 and DOUT2 to high level for infinite time.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.		Example: <code>setdigout 01 30 60</code><br> will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 01 30 60 20 30" will set DOUT1 to low level for 30 seconds if speed is 20 km/h or lower and DOUT2 to high level for 60 seconds if speed is 30 km/h or lower.		Example: <code>setdigout 01 30 60 20 30</code><br> will set DOUT1 to low level for 30 seconds if speed is 20 km/h or lower and DOUT2 to high level for 60 seconds if speed is 30 km/h or lower.
	<br/><br/>		<br/><br/>

	'''For devices with 3 digital output:<br>'''		'''For devices with 3 digital output:<br>'''
	Example:<~~br/~~>"setdigout 100" will set DOUT1 to high level for infinite time, DOUT2 to low level for infinite time and DOUT3 to low level for infinite time.		Example: <code>setdigout 100</code><br> will set DOUT1 to high level for infinite time, DOUT2 to low level for infinite time and DOUT3 to low level for infinite time.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 0?1 30 ? 20" will set DOUT1 to low level for 30 seconds, will leave DOUT2 state unchanged and set DOUT3 to high level for 20 seconds.		Example: <code>setdigout 0?1 30 ? 20</code><br> will set DOUT1 to low level for 30 seconds, will leave DOUT2 state unchanged and set DOUT3 to high level for 20 seconds.
	<br/><br/>		<br/><br/>
	Example:<~~br/~~>"setdigout 011 30 ? 20 10 30 30" will set DOUT1 to low level for 30 seconds if speed is 10 km/h or lower, DOUT2 to high level for infinite time if speed is 30 km/h or lower and DOUT3 to high level for 20 seconds if speed is 30 km/h or lower.		Example: <code>setdigout 011 30 ? 20 10 30 30</code><br> will set DOUT1 to low level for 30 seconds if speed is 10 km/h or lower, DOUT2 to high level for infinite time if speed is 30 km/h or lower and DOUT3 to high level for 20 seconds if speed is 30 km/h or lower.

Mocevicius.da at 05:53, 6 June 2019

2019-06-06T05:53:00Z

← Older revision		Revision as of 08:53, 6 June 2019
Line 1:		Line 1:
	~~{{Template:FMB FW development notice}}~~

	Sets digital outputs to ON or OFF state.<br/>		Sets digital outputs to ON or OFF state.<br/>
	SMS format: setdigout XY <timeoutX> <timeoutY> <speedX> <speedY>		SMS format: setdigout XY <timeoutX> <timeoutY> <speedX> <speedY>

Mocevicius.da at 05:35, 29 May 2019

2019-05-29T05:35:08Z

@@ Line 8: / Line 8: @@
 Speed argument determines the maximum speed threshold allowing command execution. If speed is higher than this threshold, command will be queued and executed when speed drops bellow this threshold.
 <br/><br/>
-'''For devices with 2 digital outputs:<br>'''
 '''In order to leave state/timeout/speed unchanged, "?" symbol can be used:<br/>'''
 Example:<br/>"setdigout ?1" will leave DOUT1 state unchanged and set DOUT2 to high level for infinite time.
@@ Line 22: / Line 16: @@
 Example:<br/>"setdigout 01 30 ? ? 30" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for infinite time if speed is 30 km/h or lower.
 <br/><br/>
 '''For devices with 1 digital output:<br>'''
 Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.
 <br/><br/>
 Example:<br/>"setdigout 1 30 20" will set DOUT1 to high level for 30 seconds if speed is 20 km/h or lower.

Mocevicius.da at 13:01, 28 May 2019

2019-05-28T13:01:12Z

← Older revision		Revision as of 16:01, 28 May 2019
Line 1:		Line 1:
	{{Template:FMB FW development notice}}		{{Template:FMB FW development notice}}

	Sets digital outputs to ON or OFF state (timeout is ~~valid only~~ when ~~DOUT state is changing from OFF to ON)~~.		Sets digital outputs to ON or OFF state.<br/>
			SMS format: setdigout XY <timeoutX> <timeoutY> <speedX> <speedY>
			<br/><br/>
			Both, timeout and speed arguments are not mandatory and do not have to be included in the message.<br/>
			Timeout argument determines how long the state will be held.<br/>
			Speed argument determines the maximum speed threshold allowing command execution. If speed is higher than this threshold, command will be queued and executed when speed drops bellow this threshold.
	<br/><br/>		<br/><br/>
	'''For devices with 2 digital outputs:<br>'''		'''For devices with 2 digital outputs:<br>'''
			Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.
			<br/><br/>
	Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.		Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.
	<br/><br/>		<br/><br/>
	Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.		Example:<br/>"setdigout 01 30 60 20 30" will set DOUT1 to low level for 30 seconds if speed is 20 km/h or lower and DOUT2 to high level for 60 seconds if speed is 30 km/h or lower.
			<br/><br/>
			'''In order to leave state/timeout/speed unchanged, "?" symbol can be used:<br/>'''
			Example:<br/>"setdigout ?1" will leave DOUT1 state unchanged and set DOUT2 to high level for infinite time.
			<br/><br/>
			Example:<br/>"setdigout 01 ? 60" will set DOUT1 to low level for infinite time and DOUT2 to high level for 60 seconds.
	<br/><br/>		<br/><br/>
	Example:<br/>"setdigout 11 30" will set DOUT1 to ~~high~~ level for ~~infinite time~~ and DOUT2 to high level for 30 ~~seconds~~.		Example:<br/>"setdigout 01 30 ? ? 30" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for infinite time if speed is 30 km/h or lower.
	<br/><br/>		<br/><br/>
	'''For devices with 1 digital output:<br>'''		'''For devices with 1 digital output:<br>'''
	Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.		Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.
			<br/><br/>
			Example:<br/>"setdigout 1 30 20" will set DOUT1 to high level for 30 seconds if speed is 20 km/h or lower.

Mantas.slipaitis at 07:25, 30 May 2018

2018-05-30T07:25:01Z

← Older revision		Revision as of 10:25, 30 May 2018
Line 3:		Line 3:
	Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).		Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).
	<br/><br/>		<br/><br/>
	For devices with 2 digital outputs:<br>		'''For devices with 2 digital outputs:<br>'''
	Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.		Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.
	<br/><br/>		<br/><br/>
Line 10:		Line 10:
	Example:<br/>"setdigout 11 30" will set DOUT1 to high level for infinite time and DOUT2 to high level for 30 seconds.		Example:<br/>"setdigout 11 30" will set DOUT1 to high level for infinite time and DOUT2 to high level for 30 seconds.
	<br/><br/>		<br/><br/>
	For devices with 1 digital output:<br>		'''For devices with 1 digital output:<br>'''
	Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.		Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.

Mantas.slipaitis at 07:24, 30 May 2018

2018-05-30T07:24:08Z

← Older revision		Revision as of 10:24, 30 May 2018
Line 1:		Line 1:
	{{Template:FMB FW development notice}}		{{Template:FMB FW development notice}}

	Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).<br/>Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level (for ~~infinite time)~~ and DOUT2 to high level for 60 seconds.<br/><br/>Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.		Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).
			<br/><br/>
			For devices with 2 digital outputs:<br>
			Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.
			<br/><br/>
			Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.
			<br/><br/>
			Example:<br/>"setdigout 11 30" will set DOUT1 to high level for infinite time and DOUT2 to high level for 30 seconds.
			<br/><br/>
			For devices with 1 digital output:<br>
			Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds.

Atabasnikov: Protected "FMB setdigout" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))

2018-05-23T09:47:46Z

Protected "FMB setdigout" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))

← Older revision		Revision as of 12:47, 23 May 2018
(No difference)

Atabasnikov at 08:28, 9 May 2018

2018-05-09T08:28:44Z

← Older revision		Revision as of 11:28, 9 May 2018
Line 1:		Line 1:
			{{Template:FMB FW development notice}}

	Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).<br/>Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level (for infinite time) and DOUT2 to high level for 60 seconds.<br/><br/>Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.		Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).<br/>Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level (for infinite time) and DOUT2 to high level for 60 seconds.<br/><br/>Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.

Atabasnikov: Atabasnikov moved page FMB120 setdigout to FMB setdigout

2018-04-26T07:03:35Z

Atabasnikov moved page FMB120 setdigout to FMB setdigout

← Older revision		Revision as of 10:03, 26 April 2018
(No difference)

Atabasnikov at 06:12, 13 April 2018

2018-04-13T06:12:16Z

← Older revision		Revision as of 09:12, 13 April 2018
Line 1:		Line 1:
	Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).<br/>Example: "setdigout 01 30 60" will set DOUT1 to low level (for infinite time) and DOUT2 to high level for 60 seconds.<br/>Example: "setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.		Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).<br/>Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level (for infinite time) and DOUT2 to high level for 60 seconds.<br/><br/>Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.