FMC800 Bluetooth settings - Revision history

Arnas.Zeb: Text replacement - "Bluetooth(?!®)" to "Bluetooth®"

2023-12-28T13:23:23Z

Text replacement - "Bluetooth(?!®)" to "Bluetooth®"

Justinas.strelciunas at 05:14, 14 November 2023

2023-11-14T05:14:16Z

← Older revision		Revision as of 08:14, 14 November 2023
Line 8:		Line 8:

	Example for formatting:		Example for formatting:

	~~[[File:IMAGE DISCLAIMER.png]]~~

	==General functionality==		==General functionality==

Justinas.strelciunas at 05:13, 14 November 2023

2023-11-14T05:13:48Z

← Older revision		Revision as of 08:13, 14 November 2023
Line 3:		Line 3:
	==Disclaimer==		==Disclaimer==

	If you are not using Bluetooth, please consider turning it off or change Bluetooth PIN to remove potential risks.		[[File:Alert.png\|left\|link=]] <br> If you are not using Bluetooth, '''please consider turning it off''' or '''change Bluetooth PIN''' to remove potential risks.

	If you are using Bluetooth we strongly recommend using AES encryption for enhanced security.		If you are using Bluetooth we strongly recommend '''using AES encryption''' for enhanced security.

	Example for formatting:		Example for formatting:

Justinas.strelciunas at 05:13, 14 November 2023

2023-11-14T05:13:01Z

@@ Line 1: / Line 1: @@
 __TOC__
 ==General functionality==
@@ Line 67: / Line 77: @@
 *[[Logging the FMB1YX device using your mobile phone|Logging the {{{model|FMC800}}} device using your mobile phone]]
 [[Category:FMC800 Configuration]]

Justinas.strelciunas at 13:32, 9 November 2023

2023-11-09T13:32:52Z

← Older revision		Revision as of 16:32, 9 November 2023
Line 66:		Line 66:

	*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]		*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]

			==Disclaimer==

			If you are not using Bluetooth, please consider turning it off or change Bluetooth PIN to remove potential risks.

			If you are using Bluetooth we strongly recommend using AES encryption for enhanced security.

			Example for formatting:

			[[File:IMAGE DISCLAIMER.png]]


	[[Category:FMC800 Configuration]]		[[Category:FMC800 Configuration]]

Jonas.sterbavicius: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T13:45:43Z

Text replacement - "Bluetooth®" to "Bluetooth"

Jonas.sterbavicius: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T12:59:20Z

Text replacement - "Bluetooth®" to "Bluetooth"

Jonas.sterbavicius: Sterbavicius.jo moved page FMC800 Bluetooth® settings to FMC800 Bluetooth settings over a redirect without leaving a redirect: Text replacement - "Bluetooth®" to "Bluetooth"

2023-10-27T12:55:25Z

Sterbavicius.jo moved page FMC800 Bluetooth® settings to FMC800 Bluetooth settings over a redirect without leaving a redirect: Text replacement - "Bluetooth®" to "Bluetooth"

← Older revision		Revision as of 15:55, 27 October 2023
(No difference)

Jonas.sterbavicius: Sterbavicius.jo moved page FMC800 Bluetooth settings to FMC800 Bluetooth® settings: Text replacement - "Bluetooth" to "Bluetooth®"

2023-10-27T12:53:43Z

Sterbavicius.jo moved page FMC800 Bluetooth settings to FMC800 Bluetooth® settings: Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 15:53, 27 October 2023
(No difference)

Jonas.sterbavicius: Text replacement - "Bluetooth" to "Bluetooth®"

2023-10-27T12:53:14Z

Text replacement - "Bluetooth" to "Bluetooth®"

← Older revision		Revision as of 16:23, 28 December 2023
Line 3:		Line 3:
	==Disclaimer==		==Disclaimer==

	[[File:Alert.png\|left\|link=]] <br> If you are not using ~~Bluetooth~~, '''please consider turning it off''' or '''change ~~Bluetooth~~ PIN''' to remove potential risks.		[[File:Alert.png\|left\|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks.

	If you are using ~~Bluetooth~~ we strongly recommend '''using AES encryption''' for enhanced security.		If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security.

	Example for formatting:		Example for formatting:
Line 12:		Line 12:

	[[Image:FMB BT NAME.png\|{{{general\|size}}}\|right]]		[[Image:FMB BT NAME.png\|{{{general\|size}}}\|right]]
	General functionality configures ~~Bluetooth~~ to work in slave mode. This mode allows any external device to connect to {{{model\|FMC800}}}.<br />Parameter ''BT Radio'' allows enabling or disabling ~~Bluetooth~~. There are three different settings:		General functionality configures Bluetooth® to work in slave mode. This mode allows any external device to connect to {{{model\|FMC800}}}.<br />Parameter ''BT Radio'' allows enabling or disabling Bluetooth®. There are three different settings:

	*<span style="color:#F6A83E">Disabled</span> – ~~Bluetooth~~ functionality will be disabled.		*<span style="color:#F6A83E">Disabled</span> – Bluetooth® functionality will be disabled.
	*<span style="color:#F6A83E">Enable (hidden)</span> – ~~Bluetooth~~ functionality will be enabled, external devices will be able to connect to {{{model\|FMC800}}}, but no devices will be able to detect it.		*<span style="color:#F6A83E">Enable (hidden)</span> – Bluetooth® functionality will be enabled, external devices will be able to connect to {{{model\|FMC800}}}, but no devices will be able to detect it.
	*<span style="color:#F6A83E">Enable (visible)</span> – ~~Bluetooth~~ functionality will be enabled and any external device will be able to detect and connect to {{{model\|FMC800}}}.<br />		*<span style="color:#F6A83E">Enable (visible)</span> – Bluetooth® functionality will be enabled and any external device will be able to detect and connect to {{{model\|FMC800}}}.<br />

	It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model\|FMC800}}} device. There are two different parameters:		It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model\|FMC800}}} device. There are two different parameters:

	*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model\|FMC800}}} to external devices.<br />		*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model\|FMC800}}} to external devices.<br />
	*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure ~~Bluetooth~~ PIN of {{{model\|FMC800}}} device.<br />		*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure Bluetooth® PIN of {{{model\|FMC800}}} device.<br />

	The {{{model\|FMC800}}} supports composed ~~Bluetooth~~ Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed ~~Bluetooth~~ name looks like this:<br><br>		The {{{model\|FMC800}}} supports composed Bluetooth® Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed Bluetooth® name looks like this:<br><br>
	<code>Device name + %imeiX</code><br><br>		<code>Device name + %imeiX</code><br><br>
	X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>		X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>
Line 29:		Line 29:
	<strong>Example:</strong><br>		<strong>Example:</strong><br>
	If the configured Local Name parameter is "FMC_800_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMC_800_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMC_800_9520901_LE</strong>).<br>		If the configured Local Name parameter is "FMC_800_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMC_800_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMC_800_9520901_LE</strong>).<br>
	If the Local Name is written incorrectly, the ~~Bluetooth~~ name of the device will be broadcasted as it is. An example can be seen below.<br><br>		If the Local Name is written incorrectly, the Bluetooth® name of the device will be broadcasted as it is. An example can be seen below.<br><br>

	<strong>Example:</strong><br>		<strong>Example:</strong><br>
Line 38:		Line 38:
	\|-		\|-
	\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]		\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]
	\| style="text-align: left; background: #F6F6FB;" \|The Composed ~~Bluetooth~~ name is supported from 03.25.05 firmware version.		\| style="text-align: left; background: #F6F6FB;" \|The Composed Bluetooth® name is supported from 03.25.05 firmware version.
	\|}		\|}


	{{{model\|FMC800}}} ~~Bluetooth~~ has several different ''Security Modes'':		{{{model\|FMC800}}} Bluetooth® has several different ''Security Modes'':

	*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model\|FMC800}}}.		*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model\|FMC800}}}.
Line 56:		Line 56:
	*<span style="color:#F6A83E">None</span> – disables auto connection functionality.		*<span style="color:#F6A83E">None</span> – disables auto connection functionality.
	<!--		<!--
	*<span style="color:#F6A83E">[[How to connect ~~Bluetooth~~ Hands Free adapter to FMB device\|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II ~~Bluetooth~~ Dongle to FMB device\|OBDII]]</span> – FMC800 starts searching for an external hands free headset or OBD II Dongle. If {{{model\|FMC800}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMC800 will try to pair with that external device. If the external device asks for PIN then {{{model\|FMC800}}} will send user defined ''External PIN''. After successfully pairing {{{model\|FMC800}}} will connect to paired device.		*<span style="color:#F6A83E">[[How to connect Bluetooth® Hands Free adapter to FMB device\|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II Bluetooth® Dongle to FMB device\|OBDII]]</span> – FMC800 starts searching for an external hands free headset or OBD II Dongle. If {{{model\|FMC800}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMC800 will try to pair with that external device. If the external device asks for PIN then {{{model\|FMC800}}} will send user defined ''External PIN''. After successfully pairing {{{model\|FMC800}}} will connect to paired device.
	-->		-->
	*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2\|FMB}}} has a link with the server, paired device can send messages via ~~Bluetooth~~ SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12\|Codec12]].		*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2\|FMB}}} has a link with the server, paired device can send messages via Bluetooth® SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12\|Codec12]].
	*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model\|FMC800}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model\|FMC800}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes.		*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model\|FMC800}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model\|FMC800}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes.
	*<span style="color:#F6A83E">User ID</span> - This mode makes {{{model\|FMC800}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.		*<span style="color:#F6A83E">User ID</span> - This mode makes {{{model\|FMC800}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.
Line 69:		Line 69:
	\|}		\|}

	''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "~~BluetoothDevice~~" and user enters "~~Bluetooth~~" in ''External Name'' parameter window, then {{{model\|FMC800}}} will be allowed to connect to an external device named "~~BluetoothDevice~~".		''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "Bluetooth®Device" and user enters "Bluetooth®" in ''External Name'' parameter window, then {{{model\|FMC800}}} will be allowed to connect to an external device named "Bluetooth®Device".

	===~~Bluetooth~~ solutions===		===Bluetooth® solutions===

	*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]		*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]

← Older revision		Revision as of 16:45, 27 October 2023
Line 4:		Line 4:

	[[Image:FMB BT NAME.png\|{{{general\|size}}}\|right]]		[[Image:FMB BT NAME.png\|{{{general\|size}}}\|right]]
	General functionality configures ~~Bluetooth®~~ to work in slave mode. This mode allows any external device to connect to {{{model\|FMC800}}}.<br />Parameter ''BT Radio'' allows enabling or disabling ~~Bluetooth®~~. There are three different settings:		General functionality configures Bluetooth to work in slave mode. This mode allows any external device to connect to {{{model\|FMC800}}}.<br />Parameter ''BT Radio'' allows enabling or disabling Bluetooth. There are three different settings:

	*<span style="color:#F6A83E">Disabled</span> – ~~Bluetooth®~~ functionality will be disabled.		*<span style="color:#F6A83E">Disabled</span> – Bluetooth functionality will be disabled.
	*<span style="color:#F6A83E">Enable (hidden)</span> – ~~Bluetooth®~~ functionality will be enabled, external devices will be able to connect to {{{model\|FMC800}}}, but no devices will be able to detect it.		*<span style="color:#F6A83E">Enable (hidden)</span> – Bluetooth functionality will be enabled, external devices will be able to connect to {{{model\|FMC800}}}, but no devices will be able to detect it.
	*<span style="color:#F6A83E">Enable (visible)</span> – ~~Bluetooth®~~ functionality will be enabled and any external device will be able to detect and connect to {{{model\|FMC800}}}.<br />		*<span style="color:#F6A83E">Enable (visible)</span> – Bluetooth functionality will be enabled and any external device will be able to detect and connect to {{{model\|FMC800}}}.<br />

	It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model\|FMC800}}} device. There are two different parameters:		It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model\|FMC800}}} device. There are two different parameters:

	*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model\|FMC800}}} to external devices.<br />		*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model\|FMC800}}} to external devices.<br />
	*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure ~~Bluetooth®~~ PIN of {{{model\|FMC800}}} device.<br />		*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure Bluetooth PIN of {{{model\|FMC800}}} device.<br />

	The {{{model\|FMC800}}} supports composed ~~Bluetooth®~~ Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed ~~Bluetooth®~~ name looks like this:<br><br>		The {{{model\|FMC800}}} supports composed Bluetooth Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed Bluetooth name looks like this:<br><br>
	<code>Device name + %imeiX</code><br><br>		<code>Device name + %imeiX</code><br><br>
	X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>		X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>
Line 21:		Line 21:
	<strong>Example:</strong><br>		<strong>Example:</strong><br>
	If the configured Local Name parameter is "FMC_800_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMC_800_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMC_800_9520901_LE</strong>).<br>		If the configured Local Name parameter is "FMC_800_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMC_800_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMC_800_9520901_LE</strong>).<br>
	If the Local Name is written incorrectly, the ~~Bluetooth®~~ name of the device will be broadcasted as it is. An example can be seen below.<br><br>		If the Local Name is written incorrectly, the Bluetooth name of the device will be broadcasted as it is. An example can be seen below.<br><br>

	<strong>Example:</strong><br>		<strong>Example:</strong><br>
Line 30:		Line 30:
	\|-		\|-
	\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]		\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]
	\| style="text-align: left; background: #F6F6FB;" \|The Composed ~~Bluetooth®~~ name is supported from 03.25.05 firmware version.		\| style="text-align: left; background: #F6F6FB;" \|The Composed Bluetooth name is supported from 03.25.05 firmware version.
	\|}		\|}


	{{{model\|FMC800}}} ~~Bluetooth®~~ has several different ''Security Modes'':		{{{model\|FMC800}}} Bluetooth has several different ''Security Modes'':

	*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model\|FMC800}}}.		*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model\|FMC800}}}.
Line 48:		Line 48:
	*<span style="color:#F6A83E">None</span> – disables auto connection functionality.		*<span style="color:#F6A83E">None</span> – disables auto connection functionality.
	<!--		<!--
	*<span style="color:#F6A83E">[[How to connect ~~Bluetooth®~~ Hands Free adapter to FMB device\|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II ~~Bluetooth®~~ Dongle to FMB device\|OBDII]]</span> – FMC800 starts searching for an external hands free headset or OBD II Dongle. If {{{model\|FMC800}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMC800 will try to pair with that external device. If the external device asks for PIN then {{{model\|FMC800}}} will send user defined ''External PIN''. After successfully pairing {{{model\|FMC800}}} will connect to paired device.		*<span style="color:#F6A83E">[[How to connect Bluetooth Hands Free adapter to FMB device\|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II Bluetooth Dongle to FMB device\|OBDII]]</span> – FMC800 starts searching for an external hands free headset or OBD II Dongle. If {{{model\|FMC800}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMC800 will try to pair with that external device. If the external device asks for PIN then {{{model\|FMC800}}} will send user defined ''External PIN''. After successfully pairing {{{model\|FMC800}}} will connect to paired device.
	-->		-->
	*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2\|FMB}}} has a link with the server, paired device can send messages via ~~Bluetooth®~~ SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12\|Codec12]].		*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2\|FMB}}} has a link with the server, paired device can send messages via Bluetooth SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12\|Codec12]].
	*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model\|FMC800}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model\|FMC800}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes.		*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model\|FMC800}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model\|FMC800}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes.
	*<span style="color:#F6A83E">User ID</span> - This mode makes {{{model\|FMC800}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.		*<span style="color:#F6A83E">User ID</span> - This mode makes {{{model\|FMC800}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.
Line 61:		Line 61:
	\|}		\|}

	''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "~~Bluetooth®Device~~" and user enters "~~Bluetooth®~~" in ''External Name'' parameter window, then {{{model\|FMC800}}} will be allowed to connect to an external device named "~~Bluetooth®Device~~".		''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "BluetoothDevice" and user enters "Bluetooth" in ''External Name'' parameter window, then {{{model\|FMC800}}} will be allowed to connect to an external device named "BluetoothDevice".

	===~~Bluetooth®~~ solutions===		===Bluetooth solutions===

	*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]		*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]

	[[Category:FMC800 Configuration]]		[[Category:FMC800 Configuration]]

← Older revision		Revision as of 15:59, 27 October 2023
Line 4:		Line 4:

	[[Image:FMB BT NAME.png\|{{{general\|size}}}\|right]]		[[Image:FMB BT NAME.png\|{{{general\|size}}}\|right]]
	General functionality configures ~~Bluetooth®®~~ to work in slave mode. This mode allows any external device to connect to {{{model\|FMC800}}}.<br />Parameter ''BT Radio'' allows enabling or disabling ~~Bluetooth®®~~. There are three different settings:		General functionality configures Bluetooth® to work in slave mode. This mode allows any external device to connect to {{{model\|FMC800}}}.<br />Parameter ''BT Radio'' allows enabling or disabling Bluetooth®. There are three different settings:

	*<span style="color:#F6A83E">Disabled</span> – ~~Bluetooth®®~~ functionality will be disabled.		*<span style="color:#F6A83E">Disabled</span> – Bluetooth® functionality will be disabled.
	*<span style="color:#F6A83E">Enable (hidden)</span> – ~~Bluetooth®®~~ functionality will be enabled, external devices will be able to connect to {{{model\|FMC800}}}, but no devices will be able to detect it.		*<span style="color:#F6A83E">Enable (hidden)</span> – Bluetooth® functionality will be enabled, external devices will be able to connect to {{{model\|FMC800}}}, but no devices will be able to detect it.
	*<span style="color:#F6A83E">Enable (visible)</span> – ~~Bluetooth®®~~ functionality will be enabled and any external device will be able to detect and connect to {{{model\|FMC800}}}.<br />		*<span style="color:#F6A83E">Enable (visible)</span> – Bluetooth® functionality will be enabled and any external device will be able to detect and connect to {{{model\|FMC800}}}.<br />

	It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model\|FMC800}}} device. There are two different parameters:		It is possible to configure the Local name of the device, as well as the Local PIN, which will be used when trying to pair with the {{{model\|FMC800}}} device. There are two different parameters:

	*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model\|FMC800}}} to external devices.<br />		*<span style="color:#F6A83E">Local Name</span> parameter lets user declare a visible name of {{{model\|FMC800}}} to external devices.<br />
	*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure ~~Bluetooth®®~~ PIN of {{{model\|FMC800}}} device.<br />		*<span style="color:#F6A83E">Local PIN</span> parameter lets user configure Bluetooth® PIN of {{{model\|FMC800}}} device.<br />

	The {{{model\|FMC800}}} supports composed ~~Bluetooth®®~~ Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed ~~Bluetooth®®~~ name looks like this:<br><br>		The {{{model\|FMC800}}} supports composed Bluetooth® Local names, which allows the user to have a predefined number of IMEI digits at the end of the device name. The format of the composed Bluetooth® name looks like this:<br><br>
	<code>Device name + %imeiX</code><br><br>		<code>Device name + %imeiX</code><br><br>
	X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>		X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end of IMEI. Minimum value of X is 1 and the Maximum value is 15.<br><br>
Line 21:		Line 21:
	<strong>Example:</strong><br>		<strong>Example:</strong><br>
	If the configured Local Name parameter is "FMC_800_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMC_800_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMC_800_9520901_LE</strong>).<br>		If the configured Local Name parameter is "FMC_800_%imei7" and the IMEI of the device is 352093089520901, name will be displayed as <strong>FMC_800_9520901</strong> (whether "_LE" is added at the end depends on whether device supports BLE or not. The full name of the device, which supports BLE would be <strong>FMC_800_9520901_LE</strong>).<br>
	If the Local Name is written incorrectly, the ~~Bluetooth®®~~ name of the device will be broadcasted as it is. An example can be seen below.<br><br>		If the Local Name is written incorrectly, the Bluetooth® name of the device will be broadcasted as it is. An example can be seen below.<br><br>

	<strong>Example:</strong><br>		<strong>Example:</strong><br>
Line 30:		Line 30:
	\|-		\|-
	\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]		\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]
	\| style="text-align: left; background: #F6F6FB;" \|The Composed ~~Bluetooth®®~~ name is supported from 03.25.05 firmware version.		\| style="text-align: left; background: #F6F6FB;" \|The Composed Bluetooth® name is supported from 03.25.05 firmware version.
	\|}		\|}


	{{{model\|FMC800}}} ~~Bluetooth®®~~ has several different ''Security Modes'':		{{{model\|FMC800}}} Bluetooth® has several different ''Security Modes'':

	*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model\|FMC800}}}.		*<span style="color:#F6A83E">PIN only</span> – only Local PIN will be reacquired to complete connection to {{{model\|FMC800}}}.
Line 48:		Line 48:
	*<span style="color:#F6A83E">None</span> – disables auto connection functionality.		*<span style="color:#F6A83E">None</span> – disables auto connection functionality.
	<!--		<!--
	*<span style="color:#F6A83E">[[How to connect ~~Bluetooth®®~~ Hands Free adapter to FMB device\|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II ~~Bluetooth®®~~ Dongle to FMB device\|OBDII]]</span> – FMC800 starts searching for an external hands free headset or OBD II Dongle. If {{{model\|FMC800}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMC800 will try to pair with that external device. If the external device asks for PIN then {{{model\|FMC800}}} will send user defined ''External PIN''. After successfully pairing {{{model\|FMC800}}} will connect to paired device.		*<span style="color:#F6A83E">[[How to connect Bluetooth® Hands Free adapter to FMB device\|Hands Free]]</span> or <span style="color:#F6A83E">[[How to connect OBD II Bluetooth® Dongle to FMB device\|OBDII]]</span> – FMC800 starts searching for an external hands free headset or OBD II Dongle. If {{{model\|FMC800}}} finds a device which matches user defined ''External MAC'' or ''External Name'' then FMC800 will try to pair with that external device. If the external device asks for PIN then {{{model\|FMC800}}} will send user defined ''External PIN''. After successfully pairing {{{model\|FMC800}}} will connect to paired device.
	-->		-->
	*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2\|FMB}}} has a link with the server, paired device can send messages via ~~Bluetooth®®~~ SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12\|Codec12]].		*<span style="color:#F6A83E">Data Link</span> – BT Data link mode is enabled by Configurator ''Data Link'' parameter: when <span style="color:#F6A83E">Data Link</span> is configured and {{{model_2\|FMB}}} has a link with the server, paired device can send messages via Bluetooth® SPP profile directly to the server. Messages will be encoded by [[Codec#Codec 12\|Codec12]].
	*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model\|FMC800}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model\|FMC800}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes.		*<span style="color:#F6A83E">Inateck Scanner</span> – {{{model\|FMC800}}} automatically connects to Inateck BT Barcode Scanner BCST-70 and will be ready to receive data (coded in barcode). ''Scanner must be configured for using “ENTER” as suffix.'' {{{model\|FMC800}}} supports online and inventory mode. A new record will be generated on every data portion received from scanner via SPP. Data will be stored with AVL ID 264, variable data length, max length is 32 bytes.
	*<span style="color:#F6A83E">User ID</span> - This mode makes {{{model\|FMC800}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.		*<span style="color:#F6A83E">User ID</span> - This mode makes {{{model\|FMC800}}} connect automatically to a device and stores its BT MAC address in I/O element ''User ID'' (I/O ID: 50520). This is used for driver authentication. If there‘s no connection, the I/O element value is set to 0.
Line 61:		Line 61:
	\|}		\|}

	''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "~~Bluetooth®®Device~~" and user enters "~~Bluetooth®®~~" in ''External Name'' parameter window, then {{{model\|FMC800}}} will be allowed to connect to an external device named "~~Bluetooth®®Device~~".		''External Name'' parameter works as a substring, which allows user to enter a part of the full external device name. For example, if external device name is "Bluetooth®Device" and user enters "Bluetooth®" in ''External Name'' parameter window, then {{{model\|FMC800}}} will be allowed to connect to an external device named "Bluetooth®Device".

	===~~Bluetooth®®~~ solutions===		===Bluetooth® solutions===

	*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]		*[[Logging the FMB1YX device using your mobile phone\|Logging the {{{model\|FMC800}}} device using your mobile phone]]

	[[Category:FMC800 Configuration]]		[[Category:FMC800 Configuration]]