First Start - Revision history

Robertas.balkunas at 12:35, 14 April 2025

2025-04-14T12:35:33Z

← Older revision		Revision as of 15:35, 14 April 2025
Line 9:		Line 9:
	[[image:Dual_camera_MicroSD_card_insert_2.png\|400px]]		[[image:Dual_camera_MicroSD_card_insert_2.png\|400px]]

	'''Additionally''' ,Teltonika DualCam ~~variant, which~~ supports ~~128GB~~ microSD cards, ~~has additional requirements to ensure the proper device operations~~:		'''Additionally''' ,Teltonika DualCam supports microSD cards up to 128GB so if you are using a 128GB card, follow these steps :

	* MicroSD card format should be set to '''exFAT'''		* MicroSD card format should be set to '''exFAT'''

Robertas.balkunas: Additional notes were added regarding the MicroSD card format for 128GB sd cards

2025-04-14T05:49:16Z

Additional notes were added regarding the MicroSD card format for 128GB sd cards

@@ Line 8: / Line 8: @@
 [[image:Dual_camera_MicroSD_card_insert_1.png|400px]]
 [[image:Dual_camera_MicroSD_card_insert_2.png|400px]]
 ==Mounting recommendation==

Edgar.dementenko: /* Mounting recommendation */

2025-01-16T05:04:04Z

Mounting recommendation

← Older revision		Revision as of 08:04, 16 January 2025
Line 28:		Line 28:
	* Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.		* Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.
	* Put the cover back on the camera.		* Put the cover back on the camera.
			* '''NOTE: Only the rear camera can be adjusted.'''

	Connecting power source:		Connecting power source:

Edgar.dementenko: /* Installation */

2024-08-21T11:43:48Z

Installation

← Older revision		Revision as of 14:43, 21 August 2024
Line 51:		Line 51:

	'''NOTE:''' Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.		'''NOTE:''' Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

			'''NOTE: Also, you need to buy a RJ45 cable and some RJ45 cables have two modifications, some have RS232 output on 3/4 pins some on 5/6 pins'''

	[[File:DualCam and FMC650 Ignition source.png\|frameless\|928x928px]]		[[File:DualCam and FMC650 Ignition source.png\|frameless\|928x928px]]

Maksim.jefisov at 07:59, 10 June 2024

2024-06-10T07:59:16Z

← Older revision		Revision as of 10:59, 10 June 2024
Line 62:		Line 62:
	'''NOTE:''' Two cameras must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.		'''NOTE:''' Two cameras must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

	[[File:~~Ignition source two cameras~~.~~JPG\|frameless\|928x928px~~]]		[[File:688548 DualCam and DSM with FMC650.jpg]]

	'''Two cameras FMC650 Installation with Relay'''. If you need to receive additional data from the Two cameras or one of them when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout\|FMB DOUT]].		'''Two cameras FMC650 Installation with Relay'''. If you need to receive additional data from the Two cameras or one of them when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout\|FMB DOUT]].

Edgar.dementenko at 11:18, 7 March 2024

2024-03-07T11:18:35Z

← Older revision		Revision as of 14:18, 7 March 2024
Line 57:		Line 57:

	[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]		[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]

			'''Two cameras FMC650 Installation with Ignition Source'''. To connect the two cameras to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.

			'''NOTE:''' Two cameras must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

			[[File:Ignition source two cameras.JPG\|frameless\|928x928px]]

			'''Two cameras FMC650 Installation with Relay'''. If you need to receive additional data from the Two cameras or one of them when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout\|FMB DOUT]].

			[[File:2 cameras dout.JPG\|frameless\|928x928px]]

	{\| class="wikitable"		{\| class="wikitable"

Maksim.jefisov: /* How to insert SD card */

2024-02-29T15:04:56Z

How to insert SD card

← Older revision		Revision as of 18:04, 29 February 2024
Line 4:		Line 4:
	When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.		When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.

	'''NOTE:''' ~~If you do not insert~~ microSD cards, ~~you~~ will be ~~only available~~ to ~~receive~~ images~~, but you do not~~ receive video ~~if the trigger will happen or~~ you will ~~send SMS/GPRS command~~.		'''KINDLY NOTE:''' Without microSD cards inserted, the camera will only be able to capture and transmit images instantly. To receive a video, you will need to insert the microSD card because video can be requested via timestamp, but photos can not be.

	[[image:Dual_camera_MicroSD_card_insert_1.png\|400px]]		[[image:Dual_camera_MicroSD_card_insert_1.png\|400px]]

Maksim.jefisov at 08:33, 18 October 2023

2023-10-18T08:33:26Z

← Older revision		Revision as of 11:33, 18 October 2023
Line 54:		Line 54:
	[[File:DualCam and FMC650 Ignition source.png\|frameless\|928x928px]]		[[File:DualCam and FMC650 Ignition source.png\|frameless\|928x928px]]

	'''DUALCAM FMC650 Installation with Relay'''. If you need to receive additional data from the DualCam when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit FMB DOUT.		'''DUALCAM FMC650 Installation with Relay'''. If you need to receive additional data from the DualCam when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout\|FMB DOUT]].

	[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]		[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]

Maksim.jefisov at 08:15, 18 October 2023

2023-10-18T08:15:46Z

← Older revision		Revision as of 11:15, 18 October 2023
Line 48:		Line 48:
	[[File:Reley2.PNG\|frameless\|928x928px]]		[[File:Reley2.PNG\|frameless\|928x928px]]

	'''DUALCAM FMC650 Installation'''. To connect the DualCam to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.		'''DUALCAM FMC650 Installation with Ignition Source'''. To connect the DualCam to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.

	'''NOTE:''' Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.		'''NOTE:''' Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

			[[File:DualCam and FMC650 Ignition source.png\|frameless\|928x928px]]

			'''DUALCAM FMC650 Installation with Relay'''. If you need to receive additional data from the DualCam when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit FMB DOUT.

			[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]

	{\| class="wikitable"		{\| class="wikitable"

Maksim.jefisov: /* Installation */

2023-10-18T08:08:00Z

Installation

← Older revision		Revision as of 11:08, 18 October 2023
Line 47:		Line 47:

	[[File:Reley2.PNG\|frameless\|928x928px]]		[[File:Reley2.PNG\|frameless\|928x928px]]

			'''DUALCAM FMC650 Installation'''. To connect the DualCam to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.

			'''NOTE:''' Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

	{\| class="wikitable"		{\| class="wikitable"

← Older revision		Revision as of 14:18, 7 March 2024
Line 57:		Line 57:

	[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]		[[File:DualCam and FMC650 relay.png\|frameless\|928x928px]]

			'''Two cameras FMC650 Installation with Ignition Source'''. To connect the two cameras to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.

			'''NOTE:''' Two cameras must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

			[[File:Ignition source two cameras.JPG\|frameless\|928x928px]]

			'''Two cameras FMC650 Installation with Relay'''. If you need to receive additional data from the Two cameras or one of them when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout\|FMB DOUT]].

			[[File:2 cameras dout.JPG\|frameless\|928x928px]]

	{\| class="wikitable"		{\| class="wikitable"