GH5200 First Start - Revision history

Jonas.sterbavicius: /* Set up your device */

2024-02-20T11:24:24Z

Set up your device

← Older revision		Revision as of 14:24, 20 February 2024
Line 18:		Line 18:
	[[Image:GH5200 battery sim insert-2.jpg\|250px]]		[[Image:GH5200 battery sim insert-2.jpg\|250px]]
	[[Image:GH5200 battery sim insert-3.jpg\|250px]]		[[Image:GH5200 battery sim insert-3.jpg\|250px]]
	[[Image:GH5200 battery sim insert-4.jpg\|250px]]		[[Image:GH5200 battery sim insert-4.1.jpg\|250px]]

	<table>		<table>
Line 162:		Line 162:
	<br/>		<br/>
	<p>After successful SMS configuration, {{{model\|GH5200}}} device will '''synchronize time''' and '''update records''' to '''configured server'''.		<p>After successful SMS configuration, {{{model\|GH5200}}} device will '''synchronize time''' and '''update records''' to '''configured server'''.


	==Safety information==		==Safety information==

Jonas.sterbavicius: /* How to insert Micro SIM card and connect the battery */

2024-02-20T11:14:45Z

How to insert Micro SIM card and connect the battery

← Older revision		Revision as of 14:14, 20 February 2024
Line 14:		Line 14:
	# Insert '''Micro-SIM ''' card as shown with '''PIN request disabled.''' Make sure that Micro-SIM card '''cut-off''' corner is pointing forward to slot.		# Insert '''Micro-SIM ''' card as shown with '''PIN request disabled.''' Make sure that Micro-SIM card '''cut-off''' corner is pointing forward to slot.
	# Insert the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.		# Insert the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.
	# Reattach the '''cover~~''' and tighten the '''screw~~'''.		# Reattach the '''cover'''.
	[[Image:GH5200 battery sim insert-1.jpg\|250px]] [[Image:GH5200 battery sim insert-2.jpg\|250px]][[Image:GH5200 battery sim insert-3.jpg\|250px]][[Image:GH5200 battery sim insert-4.jpg\|250px]]		[[Image:GH5200 battery sim insert-1.jpg\|250px]]
	<table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>{{{sim_type\|Micro-}}}SIM card insertion/removal must be performed when device is powered off and battery is disconnected. Otherwise {{{sim_type\|Micro-}}}SIM card might be damaged or device will not detect it.</b></td></table>		[[Image:GH5200 battery sim insert-2.jpg\|250px]]
			[[Image:GH5200 battery sim insert-3.jpg\|250px]]
			[[Image:GH5200 battery sim insert-4.jpg\|250px]]

			<table>
			<td>[[File:Alert.png\|50px\|left\|link=]]</td>
			<td><b>{{{sim_type\|Micro-}}}SIM card insertion/removal must be performed when device is powered off and battery is disconnected. Otherwise {{{sim_type\|Micro-}}}SIM card might be damaged or device will not detect it.</b></td>
			</table>

	===PC Connection (Windows)===		===PC Connection (Windows)===

Arnas.Zeb: Text replacement - "Bluetooth(?!®)" to "Bluetooth®"

2023-12-28T13:19:34Z

Text replacement - "Bluetooth(?!®)" to "Bluetooth®"

← Older revision		Revision as of 16:19, 28 December 2023
Line 22:		Line 22:
	1. Turn on your device by holding the power button for around 7 seconds.		1. Turn on your device by holding the power button for around 7 seconds.

	2. Connect device to computer using '''Micro-USB cable''' or '''~~Bluetooth~~''' connection:		2. Connect device to computer using '''Micro-USB cable''' or '''Bluetooth®''' connection:
	* Using '''Micro-USB''' cable		* Using '''Micro-USB''' cable
	– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.		– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.
	* Using '''~~Bluetooth~~'''		* Using '''Bluetooth®'''
	– GH5200 ~~Bluetooth~~ is enabled by default. Turn on '''~~Bluetooth~~''' on your PC, then select '''Add ~~Bluetooth~~ or other device > ~~Bluetooth~~'''. Choose your device named – '''“GH5200_last_7_imei_digits”''', without '''LE''' in the end. Enter default password 5555, press Connect and then select '''Done'''.		– GH5200 Bluetooth® is enabled by default. Turn on '''Bluetooth®''' on your PC, then select '''Add Bluetooth® or other device > Bluetooth®'''. Choose your device named – '''“GH5200_last_7_imei_digits”''', without '''LE''' in the end. Enter default password 5555, press Connect and then select '''Done'''.

	3. You are now ready to use the device on your computer.		3. You are now ready to use the device on your computer.

Jonas.sterbavicius: /* How to install USB drivers (Windows) */

2023-05-04T08:04:50Z

How to install USB drivers (Windows)

← Older revision		Revision as of 11:04, 4 May 2023
Line 32:		Line 32:

	===How to install USB drivers (Windows)===		===How to install USB drivers (Windows)===
	1. Please download COM port drivers from ~~here.~~ '''[[Media:TeltonikaCOMDriver.zip\|here]]'''.		1. Please download COM port drivers from '''[[Media:TeltonikaCOMDriver.zip\|here]]'''.

	2. Extract and run '''TeltonikaCOMDriver.exe'''.		2. Extract and run '''TeltonikaCOMDriver.exe'''.

Jonas.sterbavicius: /* How to install USB drivers (Windows) */

2023-05-04T08:04:39Z

How to install USB drivers (Windows)

← Older revision		Revision as of 11:04, 4 May 2023
Line 32:		Line 32:

	===How to install USB drivers (Windows)===		===How to install USB drivers (Windows)===
	1. Please download COM port drivers from here. '''[~~https~~:~~//teltonika-gps.com/downloads/en/fmb120/~~TeltonikaCOMDriver.zip here]'''.		1. Please download COM port drivers from here. '''[[Media:TeltonikaCOMDriver.zip\|here]]'''.

	2. Extract and run '''TeltonikaCOMDriver.exe'''.		2. Extract and run '''TeltonikaCOMDriver.exe'''.

Martyna.D: Protected "GH5200 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2023-04-14T10:09:08Z

Protected "GH5200 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision		Revision as of 13:09, 14 April 2023
(No difference)

Martyna.D: Created page with "GH5200 is an autonomous personal tracker for lone worker protection.right TOC ==Know your device== Image:GH5200 know your device.p..."

2023-04-14T10:09:02Z

Created page with "GH5200 is an autonomous personal tracker for lone worker protection.400px|right __TOC__ ==Know your device== Image:GH5200 know your device.p..."

New page

GH5200 is an autonomous personal tracker for lone worker protection.[[Image:GH5200 demo 00.png|400px|right]]

__TOC__

==Know your device==

[[Image:GH5200 know your device.png|center|1000px]]

==Set up your device==
===How to insert Micro SIM card and connect the battery===

# Remove the '''cover.'''
# Insert '''Micro-SIM ''' card as shown with '''PIN request disabled.''' Make sure that Micro-SIM card '''cut-off''' corner is pointing forward to slot.
# Insert the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.
# Reattach the '''cover''' and tighten the '''screw'''.
[[Image:GH5200 battery sim insert-1.jpg|250px]] [[Image:GH5200 battery sim insert-2.jpg|250px]][[Image:GH5200 battery sim insert-3.jpg|250px]][[Image:GH5200 battery sim insert-4.jpg|250px]]
<table><td>[[File:Alert.png|50px|left|link=]]</td><td>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off and battery is disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</td></table>

===PC Connection (Windows)===
1. Turn on your device by holding the power button for around 7 seconds.

2. Connect device to computer using '''Micro-USB cable''' or '''Bluetooth''' connection:
* Using '''Micro-USB''' cable
– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.
* Using '''Bluetooth'''
– GH5200 Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – '''“GH5200_last_7_imei_digits”''', without '''LE''' in the end. Enter default password 5555, press Connect and then select '''Done'''.

3. You are now ready to use the device on your computer.

===How to install USB drivers (Windows)===
1. Please download COM port drivers from here. '''[https://teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.

2. Extract and run '''TeltonikaCOMDriver.exe'''.

3. Click Next in driver installation window.

4. In the following window click '''Install''' button.
Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.

===Configuration (Windows)===

At first {{{model|GH5200}}} device will have default factory settings set. These settings should be changed according to the user's needs. 
Main configuration can be performed via '''Teltonika Configurator''' software. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

{| class="wikitable" style="width:50%;"
|+
! colspan="4" style="width:50%; border: 1px solid white; border-bottom: 2px solid white; background: #0054A6; color: white; text-align: left;" |MS .NET requirements
|-
! style="width:10%; border: 1px solid white; border-bottom: 2px solid white; background: #0054A6;color: white; text-align: left;" |Operating system
! style="width:25%; border: 1px solid white; border-bottom: 2px solid white; background: #0054A6; color: white; text-align: left;" |MS .NET Framework version
! style="width:10%; border: 1px solid white; border-bottom: 2px solid white; background: #0054A6; color: white; text-align: left;" |Version
! style="width:5%; border: 1px solid white; border-bottom: 2px solid white; background: #0054A6; color: white; text-align: left;" |Link
|-
| style="border: 1px solid #E8E8E8; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<ul style="list-style: none; margin: 0px;">
<li>Windows Vista</li>
<li>Windows 7</li>
<li>Windows 8.1</li>
<li>Windows 10</li>
</ul>
| style="border: 1px solid #E8E8E8; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |MS .NET Framework 4.6.2
| style="border: 1px solid #E8E8E8; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |32 and 64 bit
| style="border: 1px solid #E8E8E8; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[https://dotnet.microsoft.com/en-us/download/dotnet-framework www.microsoft.com]
|}

Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_icon.png|25px|link=]] in the right bottom corner:

[[File:FMB_Configurator_language.jpg|400px]]

Configuration process begins by pressing on connected device:

[[Image:Configurator connect-GH5200.jpg|400px]]

After connection to Configurator '''Status window''' will be displayed:

[[Image:GH5200 status screen.jpg|1000px|]]

Various '''Status info''' tabs display information about '''GNSS''', '''GSM''', '''I/O''', '''Maintenance''' and etc. {{{model|GH5200}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality: 
# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
# [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.
# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.

Most important configurator section is GPRS – where all your server and '''GPRS settings''' can be configured and '''Data acquisition''' – where data acquiring parameters can be configured.
More details about {{{model|GH5200}}} configuration using Configurator can be found [[GH5200 Manual|here]].

===Quick SMS configuration===

Default configuration has optimal parameters present to ensure best performance of track quality and data usage. 
Quickly set up your device by sending this SMS command to it:

" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"

<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
GPRS settings:
* 2001 – APN
* 2002 – APN username (if there are no APN username, empty field should be left)
* 2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
* 2004 – Domain
* 2005 – Port
* 2006 – Data sending protocol (0 – TCP, 1 – UDP)
</div>

'''Note''': Before SMS text, two space symbols should be inserted. 
[[File:IOS sms cfg.png|235px|right]]

{{{quick_sms_tmt|<table style="width:70%">
<tr>
<td colspan="4">'''Default configuration settings'''</td>
</tr>
<tr>
<td colspan="4">Movement detection:</td>
</tr>
<tr>
<td>[[File:Accelerometer.png|65px]]</td>
<td>Device movement will be detected by accelerometer</td>
</tr>
<tr>
<td colspan="4">Device makes a record '''On Moving''' if one of these events happen:</td>
</tr>
<tr>
<td>[[File:300s_icon_2.png|65px]]</td>
<td>300 seconds passes</td>
<td>[[File:Angle_10_2.png|65px]]</td>
<td>Angle difference between last coordinate and current position is greater than 10° degrees</td>
</tr>
<tr>
<td>[[File:Min_distance.png|65px]]</td>
<td>Traveled distance is more than 100 meters</td>
<td>[[File:Speed_delta.png|65px]]</td>
<td>Speed difference between last coordinate and current position is greater than 10 km/h</td>
</tr>
<tr>
<td colspan="4">Device makes a record '''On Stop''' if:</td>
</tr>
<tr>
<td>[[File:1h_icon.png|65px]]</td>
<td>1 hour passes while device is stationary</td>
</tr>
<tr>
<td colspan="4">Records sending to server:</td>
</tr>
<tr>
<td>[[File:120_s.png|65px]]</td>
<td>If device has made a record it is sent to the server every 120 seconds</td>
</tr>
</table>}}}

 
After successful SMS configuration, {{{model|GH5200}}} device will '''synchronize time''' and '''update records''' to '''configured server'''.

==Safety information==
This message contains information on how to operate GH5200 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
{{Template:TMT250 Mounting recommendations|model=TMT250}}

https://wiki.teltonika-mobility.com/view/GH5200
[[Category:GH5200]]

GH5200 First Start - Revision history

Jonas.sterbavicius: /* Set up your device */

Jonas.sterbavicius: /* How to insert Micro SIM card and connect the battery */

Arnas.Zeb: Text replacement - "Bluetooth(?!®)" to "Bluetooth®"

Jonas.sterbavicius: /* How to install USB drivers (Windows) */

Jonas.sterbavicius: /* How to install USB drivers (Windows) */

Martyna.D: Protected "GH5200 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

Martyna.D: Created page with "GH5200 is an autonomous personal tracker for lone worker protection.right __TOC__ ==Know your device== Image:GH5200 know your device.p..."

Martyna.D: Created page with "GH5200 is an autonomous personal tracker for lone worker protection.right TOC ==Know your device== Image:GH5200 know your device.p..."