MSP500 GPRS settings - Revision history

Gabrielius.jankauskas: Replaced content with "{{Template:FMB GPRS settings 25 base|model=MSP500|ctrSleepModes=Deep Sleep mode}} Category:MSP500 Configuration"

2021-05-21T17:07:24Z

Replaced content with "{{Template:FMB GPRS settings 25 base|model=MSP500|ctrSleepModes=Deep Sleep mode}} Category:MSP500 Configuration"

← Older revision		Revision as of 20:07, 21 May 2021
Line 1:		Line 1:
	~~==GPRS Settings and Server Settings==~~		{{Template:FMB GPRS settings 25 base\|model=MSP500\|ctrSleepModes=[[MSP500 Sleep modes#Deep Sleep mode\|Deep Sleep mode]]}}
	~~These settings define the main parameters for {~~{{~~model\|MSP500}}}~~: ~~GSM operator ''APN'' and~~ GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. An additional option is the use of TLS/DTLS encryption for sending records to the main server and backup server.

	~~{{{txt_sim2~~\|~~SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}~~
	~~==Second Server Settings==~~
	~~Backup server has 4 different modes:~~

	*<span style="color:#F6A83E">Disable</span>: backup server is not used.
	*<span style="color:#F6A83E">Backup</span>: records are sent to backup server if main server is not available (for example fails to open link) or when main server response timeout is reached successively 5 times.
	*<span style="color:#F6A83E">Duplicate</span>: records are sent to both servers (main and backup), records are deleted from SD-card (or Flash storage) only if both servers accepted the records.
	*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol.

	Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model~~\|MSP500}}} the device will send the newest records first when <span style~~=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|MSP500~~}}} and AVL application. If {{{model~~\|~~MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{~~ctrSleepModes\|[[MSP500 Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>

	~~==Records Settings==~~
	{{{model\|MSP500}}} device will send the newest records first when <span style="color:#F6A83E">Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result other records will be sent right after the newest records are received by AVL application.<br />''Data Link Timeout'' is used to set termination timeout for link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|~~[[MSP500 Sleep modes#~~Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br />''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.
	~~<br><br>~~
	~~'''ACK Type''' determines what method the device uses to receive confirmation from the server. <br>~~
	~~'''AVL''' means that the device will expect an additional AVL message from the server,~~
	~~'''TCP/IP''' means that the confirmation will be included in the TCP/IP layer and no additional message will be needed.~~

	~~<br />~~
	~~{{{fota_web\|~~
	~~==FOTA WEB Settings==~~
	These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. The address and port number of the FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.

	From 03.27.XX firmware version, FOTA WEB connection period randomizer is added. The randomizer will choose a +-2.5 period for each connection. For example, then the connection period is set to 30 minutes, device with each connection will choose a new connection (from 27.5 min to 32.5 minutes). This also applies to the "web_connect" SMS/GRRS command. This has been implemented to ensure smoother operation of FOTA WEB services by spreading out large numbers of simultaneous device connections over a longer timeframe.
	~~}}}~~
	~~{{{pic_gprs\|[[Image:GPRS_Settings_dualsim.png\|800px\|none]]}~~}}

	[[Category:MSP500 Configuration]]		[[Category:MSP500 Configuration]]

Tomas.kriauciunas at 10:15, 12 April 2021

2021-04-12T10:15:05Z

← Older revision		Revision as of 13:15, 12 April 2021
Line 11:		Line 11:
	*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol.		*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol.

	Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model\|MSP500}}} the device will send the newest records first when <span style=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[~~Template:FMB~~ Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>		Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model\|MSP500}}} the device will send the newest records first when <span style=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[MSP500 Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>

	==Records Settings==		==Records Settings==
	{{{model\|MSP500}}} device will send the newest records first when <span style="color:#F6A83E">Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result other records will be sent right after the newest records are received by AVL application.<br />''Data Link Timeout'' is used to set termination timeout for link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[~~Template:FMB~~ Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br />''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.		{{{model\|MSP500}}} device will send the newest records first when <span style="color:#F6A83E">Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result other records will be sent right after the newest records are received by AVL application.<br />''Data Link Timeout'' is used to set termination timeout for link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[MSP500 Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br />''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.
	<br><br>		<br><br>
	'''ACK Type''' determines what method the device uses to receive confirmation from the server. <br>		'''ACK Type''' determines what method the device uses to receive confirmation from the server. <br>

Tomas.kriauciunas at 10:14, 12 April 2021

2021-04-12T10:14:15Z

← Older revision		Revision as of 13:14, 12 April 2021
Line 21:		Line 21:

	<br />		<br />
	~~{{{auto_apn\|~~
	~~==Auto APN==~~
	These settings allow the device to automatically search for APN information based on inserted SIM card. This feature is explained in more detail in [[Auto_APN_feature_for_FM_trackers\|this page]].<br />
	~~}}}~~
	{{{fota_web\|		{{{fota_web\|
	==FOTA WEB Settings==		==FOTA WEB Settings==

Tomas.kriauciunas at 10:13, 12 April 2021

2021-04-12T10:13:20Z

← Older revision		Revision as of 13:13, 12 April 2021
Line 1:		Line 1:
	==GPRS Settings and Server Settings==		==GPRS Settings and Server Settings==
	These settings define the main parameters for {{{model\|~~FMB1YX~~}}}: GSM operator ''APN'' and GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. An additional option is the use of TLS/DTLS encryption for sending records to the main server and backup server.		These settings define the main parameters for {{{model\|MSP500}}}: GSM operator ''APN'' and GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. An additional option is the use of TLS/DTLS encryption for sending records to the main server and backup server.

	{{{txt_sim2\|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}		{{{txt_sim2\|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}
Line 11:		Line 11:
	*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol.		*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol.

	Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model\|~~FMB1YX~~}}} the device will send the newest records first when <span style=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|~~FMB1YX~~}}} and AVL application. If {{{model\|~~FMB1YX~~}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[Template:FMB Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>		Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model\|MSP500}}} the device will send the newest records first when <span style=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[Template:FMB Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>

	==Records Settings==		==Records Settings==
	{{{model\|~~FMB1YX~~}}} device will send the newest records first when <span style="color:#F6A83E">Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result other records will be sent right after the newest records are received by AVL application.<br />''Data Link Timeout'' is used to set termination timeout for link between {{{model\|~~FMB1YX~~}}} and AVL application. If {{{model\|~~FMB1YX~~}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[Template:FMB Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br />''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.		{{{model\|MSP500}}} device will send the newest records first when <span style="color:#F6A83E">Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result other records will be sent right after the newest records are received by AVL application.<br />''Data Link Timeout'' is used to set termination timeout for link between {{{model\|MSP500}}} and AVL application. If {{{model\|MSP500}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[Template:FMB Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br />''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.
	<br><br>		<br><br>
	'''ACK Type''' determines what method the device uses to receive confirmation from the server. <br>		'''ACK Type''' determines what method the device uses to receive confirmation from the server. <br>

Tomas.kriauciunas at 10:12, 12 April 2021

2021-04-12T10:12:27Z

@@ Line 1: / Line 1: @@
-{{
+==GPRS Settings and Server Settings==
-Template:FMB GPRS settings
+These settings define the main parameters for {{{model|FMB1YX}}}: GSM operator ''APN'' and GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. An additional option is the use of TLS/DTLS encryption for sending records to the main server and backup server.
-|model=MSP500
-|ctrSleepModes=[[MSP500 Sleep modes#Deep Sleep mode|Deep Sleep mode]]
+{{{txt_sim2|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}
-|pic_gprs=[[Image:MSP500_gprs.png|800px|center]]
+==Second Server Settings==
-|txt_sim2=
+Backup server has 4 different modes:
 }}
 [[Category:MSP500 Configuration]]

Tomas.kriauciunas: Protected "MSP500 GPRS settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2020-03-26T05:57:13Z

Protected "MSP500 GPRS settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision	Revision as of 08:57, 26 March 2020
(No difference)

Tomas.kriauciunas at 02:55, 26 March 2020

2020-03-26T02:55:01Z

← Older revision		Revision as of 05:55, 26 March 2020
Line 3:		Line 3:
	\|model=MSP500		\|model=MSP500
	\|ctrSleepModes=[[MSP500 Sleep modes#Deep Sleep mode\|Deep Sleep mode]]		\|ctrSleepModes=[[MSP500 Sleep modes#Deep Sleep mode\|Deep Sleep mode]]
	\|pic_gprs=[[Image:~~Fmb920_gprs~~.png\|800px\|center]]		\|pic_gprs=[[Image:MSP500_gprs.png\|800px\|center]]
	\|txt_sim2=		\|txt_sim2=
	}}		}}
	[[Category:MSP500 Configuration]]		[[Category:MSP500 Configuration]]

Tomas.kriauciunas: Created page with "{{ Template:FMB GPRS settings |model=MSP500 |ctrSleepModes=Deep Sleep mode |pic_gprs=center |txt_sim2= }..."

2020-03-26T02:54:53Z

Created page with "{{ Template:FMB GPRS settings |model=MSP500 |ctrSleepModes=Deep Sleep mode |pic_gprs=800px|center |txt_sim2= }..."

New page

{{
Template:FMB GPRS settings
|model=MSP500
|ctrSleepModes=[[MSP500 Sleep modes#Deep Sleep mode|Deep Sleep mode]]
|pic_gprs=[[Image:Fmb920_gprs.png|800px|center]]
|txt_sim2=
}}
[[Category:MSP500 Configuration]]