TCT Device-setup - Revision history

Patrick.sangalang at 08:29, 30 March 2023

2023-03-30T08:29:34Z

← Older revision		Revision as of 11:29, 30 March 2023
Line 34:		Line 34:
	First on the list is <b>Configure APN</b>. Select the option after which you will be forwarded to the SIM settings window and mandatory fields will become highlighted while the rest of the screen becomes dimmed. Fill up the current APN that device is using,		First on the list is <b>Configure APN</b>. Select the option after which you will be forwarded to the SIM settings window and mandatory fields will become highlighted while the rest of the screen becomes dimmed. Fill up the current APN that device is using,

	*Enter APN which corresponds to your current operator, in the example below ~~it is~~ using "internet".		*Enter APN which corresponds to your current operator, in the example below we are using "internet".

	Press <b>Next</b> which will move you to the server settings entry window.		Press <b>Next</b> which will move you to the server settings entry window.
Line 44:		Line 44:
	*Enter the Port Number of the server, in the example below we are using "12345" Port.		*Enter the Port Number of the server, in the example below we are using "12345" Port.

	After necessary configuration has been filled up you can press <b>Exit</b> if you opt to configure only ~~these~~ settings. Otherwise, you may press <b>Next</b> then it would direct you to the Optional Configuration.		After necessary configuration has been filled up you can press <b>Exit</b> if you opt to configure only the necessary settings. Otherwise, you may press <b>Next</b> then it would direct you to the Optional Configuration.


Line 51:		Line 51:
	==Device Optional Configuration==		==Device Optional Configuration==

	~~On the next steps you will see optional~~ configuration sections ~~for~~ Record Profile Settings, Features, and Permanent I/O Configuration. These setup options are not mandatory although it is recommended to configure to make the device fully set-up.		Optional configuration are subdivided into three sections Record Profile Settings, Features, and Permanent I/O Configuration. These setup options are not mandatory although it is recommended to configure to make the device fully set-up.

	===Record Profile Settings===		===Record Profile Settings===
Line 64:		Line 64:
	===Features===		===Features===

	Features setting ~~are subdivided into three sections:~~ driving behavior, vehicle protection and other features. Driving Behavior controls factors directly influencing driver safety, vehicle life, and fuel consumption as it teach drivers how to drive more safely while maintaining reduced fuel consumption. On the other hand, Vehicle protection provide features that protect vehicles from unauthorized usage and thefts using tow trucks or GSM jamming devices. Lastly, Extra features extend device capabilities such as filter incorrect location when vehicle is stationary, control DOUT with a call, get notification after turning ignition or RFID reading, and how many times ignition is turned on.		Features setting scopes driving behavior, vehicle protection and other features. Driving Behavior controls factors directly influencing driver safety, vehicle life, and fuel consumption as it teach drivers how to drive more safely while maintaining reduced fuel consumption. On the other hand, Vehicle protection provide features that protect vehicles from unauthorized usage and thefts using tow trucks or GSM jamming devices. Lastly, Extra features extend device capabilities such as filter incorrect location when vehicle is stationary, control DOUT with a call, get notification after turning ignition or RFID reading, and how many times ignition is turned on.

	After clicking <b>Next</b> you will be forwarded to the last optional configuration page which is Input / Output (I/O).		After clicking <b>Next</b> you will be forwarded to the last optional configuration page which is Input / Output (I/O).
Line 73:		Line 73:
	===Permanent I/O===		===Permanent I/O===

	Permanent I/O setting ~~aids~~ user to configure the parameter data that are necessary to be received on their server end. In case of device setup you are suggested to configure permanent I/O section which contains the main device's I/O elements such as: Movement, Ignition, DINs, DOUTs, Speed etc.		Permanent I/O setting allows user to configure the parameter data that are necessary to be received on their server end. In case of device setup you are suggested to configure permanent I/O section which contains the main device's I/O elements such as: Movement, Ignition, GSM Operator, DINs, DOUTs, Speed etc.

	The Full description for I/O elements can be found [[Template:FMB I/O settings\|here]].		The Full description for I/O elements can be found [[Template:FMB I/O settings\|here]].
Line 80:		Line 80:


	Once configuring all necessary and optional sections in TCT is done, press <b>Finish</b> and the Device set-up will be completed. User can always come back to the completed sections and edit the configuration~~. With the completion of the device setup, you can now proceed to mounting the device~~.		Once configuring all necessary and optional sections in TCT is done, press <b>Finish</b> and the Device set-up will be completed. User can always come back to the completed sections and edit the configuration.

Patrick.sangalang at 11:00, 29 March 2023

2023-03-29T11:00:15Z

← Older revision		Revision as of 14:00, 29 March 2023
Line 80:		Line 80:


	Once configuring all necessary and optional sections in TCT is done, press <b>Finish</b> and the Device ~~Set~~-up will be completed. User can always come back to the completed sections and edit the configuration. With the completion of the device setup, you can now proceed to mounting the device.		Once configuring all necessary and optional sections in TCT is done, press <b>Finish</b> and the Device set-up will be completed. User can always come back to the completed sections and edit the configuration. With the completion of the device setup, you can now proceed to mounting the device.

Patrick.sangalang at 10:59, 29 March 2023

2023-03-29T10:59:53Z

← Older revision		Revision as of 13:59, 29 March 2023
Line 3:		Line 3:
	\|}		\|}

	The Telematics Configuration Tool (TCT) Device set-up feature allows ~~you~~ to configure the device quickly and efficiently. It will guide the user through the main device configuration steps and will ensure that all basic necessary fields are completed.		The Telematics Configuration Tool (TCT) Device set-up feature allows to configure the device quickly and efficiently. It will guide the user through the main device configuration steps and will ensure that all basic necessary fields are completed.



	After launching the TCT tool, you may start device set-up by clicking the icon on the top right row of the main dashboard.		After launching the TCT tool, you may start device set-up by clicking the icon on the top right row of the main dashboard.
Line 34:		Line 32:
	<br />		<br />
	==Device Necessary Configuration==		==Device Necessary Configuration==
			First on the list is <b>Configure APN</b>. Select the option after which you will be forwarded to the SIM settings window and mandatory fields will become highlighted while the rest of the screen becomes dimmed. Fill up the current APN that device is using,

	~~First on the list is <b>Configure~~ APN~~</b>. Select the option after~~ which ~~you will be forwarded~~ to the ~~SIM settings window and mandatory fields will become highlighted while the rest of the screen becomes dimmed~~.		*Enter APN which corresponds to your current operator, in the example below it is using "internet".

	~~Enter APN which corresponds to your current operator and press~~ <b>Next</b> which will move you to the ~~IP and Domain~~ entry window. Enter the ~~domain~~ or IP address and press <b>Next</b> again.		Press <b>Next</b> which will move you to the server settings entry window.

			*Enter the Domain or IP address and press, in the example below we are using "123.123.123.123" domain.

			Press <b>Next</b> again, this will move you to the last necessary entry field which is Port.

			*Enter the Port Number of the server, in the example below we are using "12345" Port.

			After necessary configuration has been filled up you can press <b>Exit</b> if you opt to configure only these settings. Otherwise, you may press <b>Next</b> then it would direct you to the Optional Configuration.

	~~This will move you to the last necessary entry field which is Port. Enter the port and press <b>Next</b>.~~

	[[File:Device_Setup_Necessary.gif\|center]]		[[File:Device_Setup_Necessary.gif\|center]]
Line 45:		Line 51:
	==Device Optional Configuration==		==Device Optional Configuration==

	~~Within~~ the next steps you will see optional configuration sections for ~~record profile settings~~, ~~features~~ and ~~permanent~~ I/O ~~element configuration~~. These setup options are not mandatory although it is recommended to configure ~~them~~ to make ~~sure~~ the device is fully set-up.		On the next steps you will see optional configuration sections for Record Profile Settings, Features, and Permanent I/O Configuration. These setup options are not mandatory although it is recommended to configure to make the device fully set-up.

			===Record Profile Settings===

			Record Profile Settings aids user to define conditions for how periodical records are being saved and sent to the configured server. It control six different data profiles in total that cover stationary and moving vehicles in the "home", "roaming", and "unknown" cellular networks. The Full description for Record Profile Settings can be found [[Template:FMB Data acquisition settings\|here]].

	~~After completing Data Acquisition settings configuration and clicking~~ <b>Next</b> you will be forwarded to the Features Configuration ~~window. There are three sections: driving behavior, vehicle protection and other features. You can see the available features at the bottom of each section~~ window.		Clicking <b>Next</b> you will be forwarded to the Features Configuration window.

	~~To learn more about the available features please go to the~~ [[~~TCT Features~~]] ~~page. <br />~~		[[File:Optional_DataAcquisition.gif\|center]]

	After clicking <b>Next</b> you will be forwarded to the last optional configuration page which is Input / Output (I/O). Page contains three sections: permanent I/O, OBD and LVCAN. In case of device setup you are suggested to configure permanent I/O section which contains the main device's I/O elements such as: Movement, Ignition, DINs, DOUTs, Speed etc. More on the available I/O elements visit the following Wiki page [[TCT I/O elements]].

	[[File:~~Device_Setup_Necessary~~.gif\|center]]		===Features===

			Features setting are subdivided into three sections: driving behavior, vehicle protection and other features. Driving Behavior controls factors directly influencing driver safety, vehicle life, and fuel consumption as it teach drivers how to drive more safely while maintaining reduced fuel consumption. On the other hand, Vehicle protection provide features that protect vehicles from unauthorized usage and thefts using tow trucks or GSM jamming devices. Lastly, Extra features extend device capabilities such as filter incorrect location when vehicle is stationary, control DOUT with a call, get notification after turning ignition or RFID reading, and how many times ignition is turned on.

			After clicking <b>Next</b> you will be forwarded to the last optional configuration page which is Input / Output (I/O).

			[[File:Optional_Features.gif\|center]]


			===Permanent I/O===

			Permanent I/O setting aids user to configure the parameter data that are necessary to be received on their server end. In case of device setup you are suggested to configure permanent I/O section which contains the main device's I/O elements such as: Movement, Ignition, DINs, DOUTs, Speed etc.

			The Full description for I/O elements can be found [[Template:FMB I/O settings\|here]].

			[[File:Optional_IO.gif\|center]]


	~~When you are done~~ configuring all necessary and optional sections in TCT, press <b>Finish</b> and the Device Set-up will be completed. ~~You~~ can always come back to the completed sections and edit the configuration. With the completion of the device setup, you can now proceed to mounting the device.		Once configuring all necessary and optional sections in TCT is done, press <b>Finish</b> and the Device Set-up will be completed. User can always come back to the completed sections and edit the configuration. With the completion of the device setup, you can now proceed to mounting the device.

Patrick.sangalang: Created page with "{|align=right |TOC |} The Telematics Configuration Tool (TCT) Device set-up feature allows you to configure the device quickly and efficiently. It will guide the user..."

2023-03-28T10:54:21Z

Created page with "{|align=right |__TOC__ |} The Telematics Configuration Tool (TCT) Device set-up feature allows you to configure the device quickly and efficiently. It will guide the user..."

New page

{|align=right
|__TOC__
|}

The Telematics Configuration Tool (TCT) Device set-up feature allows you to configure the device quickly and efficiently. It will guide the user through the main device configuration steps and will ensure that all basic necessary fields are completed.

After launching the TCT tool, you may start device set-up by clicking the icon on the top right row of the main dashboard.
 
[[File:Device_Setup.png|thumb|left|Device set-up icon]] 
 
 
 
 
Once the Device-setup is selected, a window will show up with three Necessary and three Optional steps for device configuration.
 
[[File:Device_Setup_List.png|thumb|left|Device set-up List]]
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
==Device Necessary Configuration==

First on the list is Configure APN. Select the option after which you will be forwarded to the SIM settings window and mandatory fields will become highlighted while the rest of the screen becomes dimmed.

Enter APN which corresponds to your current operator and press Next which will move you to the IP and Domain entry window. Enter the domain or IP address and press Next again.

This will move you to the last necessary entry field which is Port. Enter the port and press Next.

[[File:Device_Setup_Necessary.gif|center]]

==Device Optional Configuration==

Within the next steps you will see optional configuration sections for record profile settings, features and permanent I/O element configuration. These setup options are not mandatory although it is recommended to configure them to make sure the device is fully set-up.

After completing Data Acquisition settings configuration and clicking Next you will be forwarded to the Features Configuration window. There are three sections: driving behavior, vehicle protection and other features. You can see the available features at the bottom of each section window.

To learn more about the available features please go to the [[TCT Features]] page. 

After clicking Next you will be forwarded to the last optional configuration page which is Input / Output (I/O). Page contains three sections: permanent I/O, OBD and LVCAN. In case of device setup you are suggested to configure permanent I/O section which contains the main device's I/O elements such as: Movement, Ignition, DINs, DOUTs, Speed etc. More on the available I/O elements visit the following Wiki page [[TCT I/O elements]].

[[File:Device_Setup_Necessary.gif|center]]

When you are done configuring all necessary and optional sections in TCT, press Finish and the Device Set-up will be completed. You can always come back to the completed sections and edit the configuration. With the completion of the device setup, you can now proceed to mounting the device.

TCT Device-setup - Revision history

Patrick.sangalang at 08:29, 30 March 2023

Patrick.sangalang at 11:00, 29 March 2023

Patrick.sangalang at 10:59, 29 March 2023

Patrick.sangalang: Created page with "{|align=right |__TOC__ |} The Telematics Configuration Tool (TCT) Device set-up feature allows you to configure the device quickly and efficiently. It will guide the user..."

Patrick.sangalang: Created page with "{|align=right |TOC |} The Telematics Configuration Tool (TCT) Device set-up feature allows you to configure the device quickly and efficiently. It will guide the user..."