TSM232 and FMB6 - Revision history

Justinas.strelciunas at 05:48, 8 October 2024

2024-10-08T05:48:33Z

← Older revision		Revision as of 08:48, 8 October 2024
Line 74:		Line 74:

	<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>		<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>

			==Additional information==

			{{{EOL\|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}

	[[Category:EOL Products]]		[[Category:EOL Products]]

Jonas.sterbavicius at 11:04, 17 January 2023

2023-01-17T11:04:03Z

← Older revision		Revision as of 14:04, 17 January 2023
Line 75:		Line 75:
	<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>		<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>

	[[Category:~~Solutions~~]]		[[Category:EOL Products]]

Sandra.Gasyte at 08:02, 4 January 2022

2022-01-04T08:02:26Z

← Older revision		Revision as of 11:02, 4 January 2022
Line 29:		Line 29:
	[[Image:Sattelite_mode_63.gif\|600px\|center]]		[[Image:Sattelite_mode_63.gif\|600px\|center]]

	FM will enable satellite mode only if the device can not send data via GPRS. ~~Sattelite~~ mode has its own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellite traffic prices. 8 kilobytes monthly data limit is hardcoded in firmware. If the data limit is reached – the data limit counter will reset automatically only on next month first day or you can rest counter by SMS command ~~“sbdlimitsreset”~~		FM will enable satellite mode only if the device can not send data via GPRS. Satellite mode has its own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellite traffic prices. 8 kilobytes monthly data limit is hardcoded in firmware. If the data limit is reached – the data limit counter will reset automatically only on next month first day or you can rest counter by SMS command <code>sbdlimitsreset</code>
	[[Image:Short_burst_data_63.gif\|600px\|center]]		[[Image:Short_burst_data_63.gif\|600px\|center]]
	In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic and check the checkbox “Satellite I/O” for what you want to get that data through satellites if there is no GSM connection.		In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic and check the checkbox “Satellite I/O” for what you want to get that data through satellites if there is no GSM connection.

Sandra.Gasyte at 08:01, 4 January 2022

2022-01-04T08:01:05Z

← Older revision		Revision as of 11:01, 4 January 2022
Line 4:		Line 4:

	==Description==		==Description==
	Teltonika TSM232 is an Iridium SATELLITE terminal with a backup battery. The full solution combines Teltonika TSM232 with Teltonika FM63XY, FMB630, or ~~FMB640~~ connected via RS232. This solution allows transferring data to a server via the Iridium satellite network when other terrestrial networks are unavailable. High capacity internal Ni-MH battery ensures long autonomous working hours when the main power source is disconnected. Such a solution meets the demand for high-security logistics, marine transport, construction & mining transport, oil/gas industry, public safety, government/defense, and more.		Teltonika [[TSM232]] is an Iridium SATELLITE terminal with a backup battery. The full solution combines Teltonika [[TSM232]] with Teltonika FM63XY, [[FMB630]], [[FMB640]], [[FMC640]], or [[FMM640]] connected via RS232. This solution allows transferring data to a server via the Iridium satellite network when other terrestrial networks are unavailable. High capacity internal Ni-MH battery ensures long autonomous working hours when the main power source is disconnected. Such a solution meets the demand for high-security logistics, marine transport, construction & mining transport, oil/gas industry, public safety, government/defense, and more.

	[[Image:TSM232_schematic2.jpg\|500px\|center]]		[[Image:TSM232_schematic2.jpg\|500px\|center]]

	==First Start Guide==		==First Start Guide==
	The device supports Iridium devices ~~which~~ can send short burst data (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites.		The device supports Iridium devices that can send short burst data (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites.
	<br/>		<br/>

Line 19:		Line 19:
	===TSM232 connection scheme===		===TSM232 connection scheme===

	Port1/2 cable from the FM package can be used for the TSM232 connection. For this, you need to cut a D-SUB connector		Port1/2 cable from the FM package can be used for the [[TSM232]] connection. For this, you need to cut a D-SUB connector
	and connect wires according to the instruction below. (PIN 4 to TSM GND, PIN5 to TSM Rx, PIN6 to TSM Tx).<br/>		and connect wires according to the instruction below. (PIN 4 to TSM GND, PIN5 to TSM Rx, PIN6 to TSM Tx).<br/>
	[[Image:FMX6 and TSM232 connection scheme v1.2.png\|950px\|center]]		[[Image:FMX6 and TSM232 connection scheme v1.2.png\|950px\|center]]
Line 25:		Line 25:

	===Configuring FM63XY/FMB630===		===Configuring FM63XY/FMB630===
	At first FM63XY/FMB630 device will have default factory settings set. These settings should be changed according to the user's needs first. Please see our First start guide'''[[FM6300 First Start\| here]]'''.<br/><br/>		At first FM63XY/[[FMB630]] device will have the default factory settings set. These settings should be changed according to the user's needs first. Please see our First start guide'''[[FM6300 First Start\| here]]'''.<br/><br/>
	After you have connected the device to FM COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings are found in the External devices TAB. Baud rate for satellite devices is 19200 bps		After you have connected the device to FM COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings are found in the External devices TAB. Baud rate for satellite devices is 19200 bps
	[[Image:Sattelite_mode_63.gif\|600px\|center]]		[[Image:Sattelite_mode_63.gif\|600px\|center]]

	FM will enable satellite mode only if the device can not send data via GPRS. Sattelite mode has ~~his~~ own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellite traffic ~~price~~. 8 kilobytes monthly data limit is hardcoded in firmware. If the data limit is reached – the data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”		FM will enable satellite mode only if the device can not send data via GPRS. Sattelite mode has its own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellite traffic prices. 8 kilobytes monthly data limit is hardcoded in firmware. If the data limit is reached – the data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”
	[[Image:Short_burst_data_63.gif\|600px\|center]]		[[Image:Short_burst_data_63.gif\|600px\|center]]
	In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.		In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic and check the checkbox “Satellite I/O” for what you want to get that data through satellites if there is no GSM connection.
	[[Image:Io_sattelite_63.gif\|1000px\|center]]		[[Image:Io_sattelite_63.gif\|1000px\|center]]
	In this scenario, then the Digital input record will be generated internal 90 seconds timer will start to tick and if in that timeout device will not send the record through the GPRS network it will be sent with Iridium satellites. Only 9 elements can generate Alarm priority records in the current firmware version. These elements are Digital input 1, Digital input 2, Digital		In this scenario, then the Digital input record will be generated internal 90 seconds timer will start to tick and if in that timeout device will not send the record through the GPRS network it will be sent with Iridium satellites. Only 9 elements can generate Alarm priority records in the current firmware version. These elements are:
	input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital ~~output4,~~ Speed.		* Digital input 1
			* Digital input 2
			* Digital input 3
			* Digital input 4
			* Digital output 1
			* Digital output 2
			* Digital output 3
			* Digital output 4
			* Speed
	Record which will be sent through the Iridium satellite network will be different than the regular record. It will contain: 4		Record which will be sent through the Iridium satellite network will be different than the regular record. It will contain: 4
	bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed		bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed
	value.		value.
	===Configuring ~~FMB640~~===		===Configuring FMX640===
	Since 00.02.05 firmware version device supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites.		Since 00.02.05 firmware version device supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites.
	In order to get those records, you have to connect the device to ~~FM64~~ COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings could be found in RS232/RS485 TAB in the configurator. The Baud rate for satellite devices is 19200 bps. Furthermore, TSM232 functionality should be enabled. These settings can be found in the Features TAB in Short burst data settings. See the picture below.		In order to get those records, you have to connect the device to FMX640 COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings could be found in RS232/RS485 TAB in the configurator. The Baud rate for satellite devices is 19200 bps. Furthermore, [[TSM232]] functionality should be enabled. These settings can be found in the Features TAB in Short burst data settings. See the picture below.
	[[Image:Rs232_setting.gif\|280px\|center]]		[[Image:Rs232_setting.gif\|280px\|center]]

	You should also configure periodic Alarm record save. If the timeout is set to 0, no periodic records are going to be made. It is not recommended to save records often because of satellite traffic ~~price~~. 3 kilobytes data limit counter is set which is reset every month. In addition, you can select which IO element can generate the Alarm priority record. The configurable IO parameters are shown as SBD IO ~~source~~ in the picture ~~above~~. In order to do that you need to configure these IO elements as Panic priority. If properly configured SBD records are generated and sent if there is no GSM connection.		You should also configure periodic Alarm record save. If the timeout is set to 0, no periodic records are going to be made. It is not recommended to save records often because of satellite traffic prices. 8 kilobytes data limit counter is set which is reset every month. In addition, you can select which IO element can generate the Alarm priority record. The configurable IO parameters are shown as SBD IO sources in the picture below. In order to do that you need to configure these IO elements as a Panic priority. If properly configured SBD records are generated and sent if there is no GSM connection.

	[[Image:Short_burst_data_settings.gif\|300px\|center]]		[[Image:Short_burst_data_settings.gif\|300px\|center]]

	In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic		In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic what you want to get that data through satellites if there is no GSM connection.
	what you want to get that data through satellites if there is no GSM connection.
	[[Image:Io_sattelite.gif\|1300px\|center]]		[[Image:Io_sattelite.gif\|1300px\|center]]
	In the scenario shown in the above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send record through the GPRS network it will be sent with Iridium satellites. 9 elements can generate Alarm priority records in the current (00.02.05) firmware version. These elements are Digital input 1, Digital input 2, Digital input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital ~~output4,~~ Speed.		In the scenario shown in the above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if that timeout device will not send a record through the GPRS network it will be sent with Iridium satellites. 9 elements can generate Alarm priority records in the current (00.02.05) firmware version. These elements are:
			* Digital input 1
			* Digital input 2
			* Digital input 3
			* Digital input 4
			* Digital output 1
			* Digital output 2
			* Digital output 3
			* Digital output 4
			* Speed
	Record which will be sent through the Iridium satellite network will be different than the regular record. It will contain 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed value.		Record which will be sent through the Iridium satellite network will be different than the regular record. It will contain 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed value.

Aurimas.vanagas: /* Configuring FMB640 */

2021-08-30T12:49:19Z

Configuring FMB640

← Older revision		Revision as of 15:49, 30 August 2021
Line 47:		Line 47:
	[[Image:Short_burst_data_settings.gif\|300px\|center]]		[[Image:Short_burst_data_settings.gif\|300px\|center]]

	In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic ~~and check the checkbox “Satellite I/O”~~ what you want to get that data through satellites if there is no GSM connection.		In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic
			what you want to get that data through satellites if there is no GSM connection.
	[[Image:Io_sattelite.gif\|1300px\|center]]		[[Image:Io_sattelite.gif\|1300px\|center]]
	In the scenario shown in the above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send record through the GPRS network it will be sent with Iridium satellites. 9 elements can generate Alarm priority records in the current (00.02.05) firmware version. These elements are Digital input 1, Digital input 2, Digital input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.		In the scenario shown in the above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send record through the GPRS network it will be sent with Iridium satellites. 9 elements can generate Alarm priority records in the current (00.02.05) firmware version. These elements are Digital input 1, Digital input 2, Digital input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.

Sandra.Gasyte at 13:10, 18 September 2020

2020-09-18T13:10:34Z

Gediminas.suminas at 07:34, 12 June 2020

2020-06-12T07:34:55Z

← Older revision		Revision as of 10:34, 12 June 2020
Line 58:		Line 58:

	<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>		<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>

			[[Category:Solutions]]

Fomcenko.vi: Protected "TSM232 and FMB6" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))

2020-05-14T08:48:39Z

Protected "TSM232 and FMB6" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))

← Older revision		Revision as of 11:48, 14 May 2020
(No difference)

AndrewBakalovTeltonika at 07:51, 14 May 2020

2020-05-14T07:51:47Z

← Older revision		Revision as of 10:51, 14 May 2020
Line 33:		Line 33:
	[[Image:Short_burst_data_63.gif\|600px\|center]]		[[Image:Short_burst_data_63.gif\|600px\|center]]
	In addition, you can select which IO element can generate Satellite record. In order to do that you need to go to IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.		In addition, you can select which IO element can generate Satellite record. In order to do that you need to go to IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.
	[[Image:~~Sattelite_IO~~.~~png~~\|~~600px~~\|center]]		[[Image:Io_sattelite_63.gif\|1000px\|center]]
	In this scenario, then the Digital input record will be generated internal 90 seconds timer will start to tick and if in that timeout device will not send record through GPRS network it will be sent with Iridium satellites. Only 9 elements can generate Alarm priority records in the current firmware version. These elements are Digital input 1, Digital input 2, Digital		In this scenario, then the Digital input record will be generated internal 90 seconds timer will start to tick and if in that timeout device will not send record through GPRS network it will be sent with Iridium satellites. Only 9 elements can generate Alarm priority records in the current firmware version. These elements are Digital input 1, Digital input 2, Digital
	input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.		input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.

AndrewBakalovTeltonika at 07:45, 14 May 2020

2020-05-14T07:45:36Z

← Older revision		Revision as of 10:45, 14 May 2020
Line 28:		Line 28:
	At first FM63XY/FMB630 device will have default factory settings set. These settings should be changed according to the user's needs first. Please see our First start guide'''[[FM6300 First Start\| here]]'''.<br/><br/>		At first FM63XY/FMB630 device will have default factory settings set. These settings should be changed according to the user's needs first. Please see our First start guide'''[[FM6300 First Start\| here]]'''.<br/><br/>
	After you have connected the device to FM COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings are found in the External devices TAB. Baud rate for satellite devices is 19200 bps		After you have connected the device to FM COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings are found in the External devices TAB. Baud rate for satellite devices is 19200 bps
	[[Image:~~Satellite_backup_mode~~.~~png~~\|~~300px~~\|center]]		[[Image:Sattelite_mode_63.gif\|600px\|center]]

	FM will enable satellite mode only if the device can not send data via GPRS. Sattelite mode has his own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellites traffic price. 8 kilobytes monthly data limit is hardcoded in firmware. If data limit is reached – data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”		FM will enable satellite mode only if the device can not send data via GPRS. Sattelite mode has his own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellites traffic price. 8 kilobytes monthly data limit is hardcoded in firmware. If data limit is reached – data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”

← Older revision		Revision as of 16:10, 18 September 2020
Line 4:		Line 4:

	==Description==		==Description==
	Teltonika TSM232 is Iridium SATELLITE terminal with a backup battery. The full solution combines Teltonika TSM232 with Teltonika FM63XY, FMB630 or FMB640 connected via RS232. This solution allows transferring data to a server via the Iridium satellite network when other terrestrial networks are unavailable. High capacity internal Ni-MH battery ensures long autonomous working hours when the main power source is disconnected. Such a solution meets the demand for high-security ~~logistic~~, marine transport, construction & mining transport, oil/gas industry, public safety, government/defense and more.		Teltonika TSM232 is an Iridium SATELLITE terminal with a backup battery. The full solution combines Teltonika TSM232 with Teltonika FM63XY, FMB630, or FMB640 connected via RS232. This solution allows transferring data to a server via the Iridium satellite network when other terrestrial networks are unavailable. High capacity internal Ni-MH battery ensures long autonomous working hours when the main power source is disconnected. Such a solution meets the demand for high-security logistics, marine transport, construction & mining transport, oil/gas industry, public safety, government/defense, and more.

	[[Image:TSM232_schematic2.jpg\|500px\|center]]		[[Image:TSM232_schematic2.jpg\|500px\|center]]

	==First Start Guide==		==First Start Guide==
	The device supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from FM device to server through satellites.		The device supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites.
	<br/>		<br/>

Line 19:		Line 19:
	===TSM232 connection scheme===		===TSM232 connection scheme===

	Port1/2 cable from FM package can be used for TSM232 connection. For this, you need to cut a D-SUB connector		Port1/2 cable from the FM package can be used for the TSM232 connection. For this, you need to cut a D-SUB connector
	and connect wires according to the instruction below. (PIN 4 to TSM GND, PIN5 to TSM Rx, PIN6 to TSM Tx).<br/>		and connect wires according to the instruction below. (PIN 4 to TSM GND, PIN5 to TSM Rx, PIN6 to TSM Tx).<br/>
	[[Image:~~RJ45_2~~.~~png\|400px\|center]]~~		[[Image:FMX6 and TSM232 connection scheme v1.2.png\|950px\|center]]
	~~[[Image:FMB640_RS232_v2~~.png\|~~300px~~\|center]]


Line 30:		Line 29:
	[[Image:Sattelite_mode_63.gif\|600px\|center]]		[[Image:Sattelite_mode_63.gif\|600px\|center]]

	FM will enable satellite mode only if the device can not send data via GPRS. Sattelite mode has his own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of ~~satellites~~ traffic price. 8 kilobytes monthly data limit is hardcoded in firmware. If data limit is reached – data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”		FM will enable satellite mode only if the device can not send data via GPRS. Sattelite mode has his own Save/Send period. If the timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellite traffic price. 8 kilobytes monthly data limit is hardcoded in firmware. If the data limit is reached – the data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”
	[[Image:Short_burst_data_63.gif\|600px\|center]]		[[Image:Short_burst_data_63.gif\|600px\|center]]
	In addition, you can select which IO element can generate Satellite ~~record~~. In order to do that you need to go to IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.		In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.
	[[Image:Io_sattelite_63.gif\|1000px\|center]]		[[Image:Io_sattelite_63.gif\|1000px\|center]]
	In this scenario, then the Digital input record will be generated internal 90 seconds timer will start to tick and if in that timeout device will not send record through GPRS network it will be sent with Iridium satellites. Only 9 elements can generate Alarm priority records in the current firmware version. These elements are Digital input 1, Digital input 2, Digital		In this scenario, then the Digital input record will be generated internal 90 seconds timer will start to tick and if in that timeout device will not send the record through the GPRS network it will be sent with Iridium satellites. Only 9 elements can generate Alarm priority records in the current firmware version. These elements are Digital input 1, Digital input 2, Digital
	input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.		input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.
	Record which will be sent through Iridium ~~satellites~~ network will be different than the regular record. It will contain: 4		Record which will be sent through the Iridium satellite network will be different than the regular record. It will contain: 4
	bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed		bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed
	value.		value.
	===Configuring FMB640===		===Configuring FMB640===
	Since 00.02.05 firmware version device supports Iridium devices which can send short burst data (SBD) to server. This means that some data can be sent from FM device to server through satellites.		Since 00.02.05 firmware version device supports Iridium devices which can send short burst data (SBD) to the server. This means that some data can be sent from the FM device to the server through satellites.
	In order to get those records, you have to connect the device to FM64 COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings could be found in RS232/RS485 TAB in the configurator. Baud rate for satellite devices is 19200 bps. Furthermore, TSM232 functionality should be enabled. These settings can be found in the Features TAB in Short burst data settings. See picture below.		In order to get those records, you have to connect the device to FM64 COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings could be found in RS232/RS485 TAB in the configurator. The Baud rate for satellite devices is 19200 bps. Furthermore, TSM232 functionality should be enabled. These settings can be found in the Features TAB in Short burst data settings. See the picture below.
	[[Image:Rs232_setting.gif\|280px\|center]]		[[Image:Rs232_setting.gif\|280px\|center]]

	You should also configure periodic Alarm record save. If the timeout is set to 0, no periodic records are going to be made. It is not recommended to save records often because of ~~satellites~~ traffic price. 3 kilobytes data limit counter is set which is reset every month. In addition, you can select which IO element can generate Alarm priority record. The configurable IO parameters are shown as SBD IO source in the picture above. In order to do that you need to configure these IO elements as Panic priority. If properly configured SBD records are generated and sent if there is no GSM connection.		You should also configure periodic Alarm record save. If the timeout is set to 0, no periodic records are going to be made. It is not recommended to save records often because of satellite traffic price. 3 kilobytes data limit counter is set which is reset every month. In addition, you can select which IO element can generate the Alarm priority record. The configurable IO parameters are shown as SBD IO source in the picture above. In order to do that you need to configure these IO elements as Panic priority. If properly configured SBD records are generated and sent if there is no GSM connection.

	[[Image:Short_burst_data_settings.gif\|300px\|center]]		[[Image:Short_burst_data_settings.gif\|300px\|center]]

	In addition, you can select which IO element can generate Satellite ~~record~~. In order to do that you need to go to IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.		In addition, you can select which IO element can generate Satellite records. In order to do that you need to go to the IO tab select IO record priority Panic and check the checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.
	[[Image:Io_sattelite.gif\|1300px\|center]]		[[Image:Io_sattelite.gif\|1300px\|center]]
	In scenario shown in above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send record through GPRS network it will be sent with Iridium satellites. 9 elements can generate Alarm priority records in the current (00.02.05) firmware version. These elements are Digital input 1, Digital input 2, Digital input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.		In the scenario shown in the above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send record through the GPRS network it will be sent with Iridium satellites. 9 elements can generate Alarm priority records in the current (00.02.05) firmware version. These elements are Digital input 1, Digital input 2, Digital input 3, Digital input 4, Digital output 1, Digital output 2, Digital output 3, Digital output4, Speed.
	Record which will be sent through Iridium ~~satellites~~ network will be different than the regular record. It will contain 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed value.		Record which will be sent through the Iridium satellite network will be different than the regular record. It will contain 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN, DOUT info, 1 byte speed value.

	===Video Guide===		===Video Guide===

	You can find connection and configuration video guide by clicking on the link below:		You can find the connection and configuration video guide by clicking on the link below:

	<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>		<youtube>https://www.youtube.com/embed/NQURGWNAsVc?controls=0</youtube>

	[[Category:Solutions]]		[[Category:Solutions]]