Template:Beacon List - Revision history

Arijus.C at 11:05, 30 April 2026

2026-04-30T11:05:07Z

@@ Line 10: / Line 10: @@
 [[Image:Beacon_Settings{{{beacon_set|}}}.PNG|right]]
 }}
 '''Beacon Detection'''
@@ Line 39: / Line 27: @@
 '''Beacon Clear Timeout''' - Time period in seconds in which beacons are “visible” to the device and if beacons are not detected repeatedly in these time periods, they are considered lost and deleted from visible beacons list. In case of periodic scan, visible list will be cleared after the scan if beacons were not found during the last scan.
 <b>iBeacon</b> and <b>Eddystone</b> data frame has the following structure:
 * <b>iBeacon</b> – 20 Bytes (UUID(16 Bytes):major(2 Bytes):minor(2 Bytes))
@@ Line 46: / Line 52: @@
 ==EYE Beacon Settings==
-[[File:EYE Beacon Settings.png]]
+[[File:Beacon Settings - TFT100.png]]
 <br>
 *The New firmware has two Beacon lists, so it is possible to create two separate lists of beacons, standard one with Beacons ID (UUID:Major:Minor, or Namespace:InstanceID) and new one according Beacon Name (by name or prefix, for example all beacons with prefix "ID1" can be saved.)

Arijus.C at 09:20, 30 April 2026

2026-04-30T09:20:13Z

← Older revision		Revision as of 12:20, 30 April 2026
Line 36:		Line 36:
	{{#switch: {{{model}}}		{{#switch: {{{model}}}
	\|TFT100 =		\|TFT100 =
	'''Beacon Clear Timeout'''		'''Beacon Clear Timeout''' <br>
	'''Beacon Clear Timeout''' - Time period in seconds in which beacons are “visible” to the device and if beacons are not detected repeatedly in these time periods, they are considered lost and deleted from visible beacons list. In case of periodic scan, visible list will be cleared after the scan if beacons were not found during the last scan.		'''Beacon Clear Timeout''' - Time period in seconds in which beacons are “visible” to the device and if beacons are not detected repeatedly in these time periods, they are considered lost and deleted from visible beacons list. In case of periodic scan, visible list will be cleared after the scan if beacons were not found during the last scan.

Arijus.C at 09:19, 30 April 2026

2026-04-30T09:19:21Z

← Older revision		Revision as of 12:19, 30 April 2026
Line 19:		Line 19:
	<b>Note!</b> <i>UUID</i>, <i>Namespace</i> or <i>Major/Minor</i> for <b>iBeacon</b> and <i>Namespace</i> for <b>Eddystone</b>.		<b>Note!</b> <i>UUID</i>, <i>Namespace</i> or <i>Major/Minor</i> for <b>iBeacon</b> and <i>Namespace</i> for <b>Eddystone</b>.

	~~<br>~~		If <span style=color:#F6A83E>Beacon Detection</span> selected as <code>Configured</code>, then beacons will be detected and their data transmitted to the server only if their IDs are included in <span style=color:#F6A83E>Beacon List</span>.
	If <span style=color:#F6A83E>Beacon Detection</span> selected as <code>Configured</code>, then beacons will be detected and their data transmitted to the server only if their IDs are included in <span style=color:#F6A83E>Beacon List</span>.~~<br><br>~~

	If <span style=color:#F6A83E>Non Stop Scan</span> is enabled in '''Bluetooth 4.0 tab''' settings, then a <span style=color:#F6A83E>Beacon Clear Timeout</span> will appear under '''Beacon Settings'''.		If <span style=color:#F6A83E>Non Stop Scan</span> is enabled in '''Bluetooth 4.0 tab''' settings, then a <span style=color:#F6A83E>Beacon Clear Timeout</span> will appear under '''Beacon Settings'''.

Arijus.C at 09:18, 30 April 2026

2026-04-30T09:18:43Z

@@ Line 6: / Line 6: @@
 {{#switch: {{{model}}}
 |TFT100 =
 [[Image:Beacon_Settings{{{beacon_set|}}}.PNG|right]]
 }}
 '''Beacon Detection'''
@@ Line 15: / Line 28: @@
 * <code>All</code> – Any visible beacon is detected (Max. 100).<br>
 * <code>Configured</code> – Only data received from listed beacons in <span style=color:#F6A83E>Beacon List</span> is sent to server.
 {{#switch: {{{model}}}
 |TFT100 =
-<br><br><br><br><br><br>
+'''Beacon Clear Timeout'''
 |#default =
 }}
 ==EYE Beacon Settings==
-[[File:Beacon detection.gif]]
+[[File:EYE Beacon Settings.png]]
 <br>
 *The New firmware has two Beacon lists, so it is possible to create two separate lists of beacons, standard one with Beacons ID (UUID:Major:Minor, or Namespace:InstanceID) and new one according Beacon Name (by name or prefix, for example all beacons with prefix "ID1" can be saved.)
 * '''Beacon ID''' - configurator allows to configure beacon ID in iBeacon or Eddystone format in Beacon List.
 * '''Beacon Name''' - The names of beacons which need to be filtered can be entered. Only the beginning part of the EYE Beacon local name has to match. For example, if in the EYE Beacon name list “EYE_Beacon” is added and the FM tracker detects EYE_Beacon1, EYE_Beacon2, EYE_BeaconXYZ, all these EYE Beacons will be added to EYE Beacon name list.
-Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list. However, Filtering only works Beacon Mode is set to Simple.
+Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list.
 <br>[[File:Eye Beacon Prox.png|right|border]]
 ===Eye feature mode: Proximity===
 EYE beacon Proximity events is a functionality which creates three different types of records, depending on the captured Beacons RSSI level. This functionality is only supported with Teltonika EYE beacons.<br> Proximity events consist of near, away and lost events: <br>
 *When EYE beacon RSSI level is below the first configured threshold, the beacon will be added to Near Beacon Record '''(AVL ID: 10828)'''
@@ Line 95: / Line 122: @@
 |-
 |}
 {{{no_send|* <code>No Send</code> – Records will not be saved and sent. Could be used together with Beacon On Demand feature to avoid excess records of the beacons.<br>}}}
 |}
@@ Line 122: / Line 144: @@
 |}
 }}}
 {|style="width: 100%;"
 {{#if:{{{BLE_no_show|}}}

Arijus.C at 07:29, 30 April 2026

2026-04-30T07:29:46Z

← Older revision		Revision as of 10:29, 30 April 2026
Line 30:		Line 30:
	Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list. However, Filtering only works Beacon Mode is set to Simple.		Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list. However, Filtering only works Beacon Mode is set to Simple.
	<br>[[File:Eye Beacon Prox.png\|right\|border]]		<br>[[File:Eye Beacon Prox.png\|right\|border]]
	~~'''~~Eye feature mode: Proximity~~'''~~		===Eye feature mode: Proximity===

	EYE beacon Proximity events is a functionality which creates three different types of records, depending on the captured Beacons RSSI level. This functionality is only supported with Teltonika EYE beacons.<br> Proximity events consist of near, away and lost events: <br>		EYE beacon Proximity events is a functionality which creates three different types of records, depending on the captured Beacons RSSI level. This functionality is only supported with Teltonika EYE beacons.<br> Proximity events consist of near, away and lost events: <br>
Line 44:		Line 44:
	'''Averaging Timeout''' <br>		'''Averaging Timeout''' <br>
	This parameter specifies how long it will take current RSSI value to reach new RSSI value. For example, current EYE Beacon RSSI value is -40 dBm. FMB captures same EYE Beacon with RSSI value of -60 dBm. If averaging timeout is configured to be 10 seconds, it will take 10 seconds for RSSI value to reach -60 dBm from -40 dBm. Keep in mind that this is assuming perfect conditions and subsequent EYE Beacon RSSI		This parameter specifies how long it will take current RSSI value to reach new RSSI value. For example, current EYE Beacon RSSI value is -40 dBm. FMB captures same EYE Beacon with RSSI value of -60 dBm. If averaging timeout is configured to be 10 seconds, it will take 10 seconds for RSSI value to reach -60 dBm from -40 dBm. Keep in mind that this is assuming perfect conditions and subsequent EYE Beacon RSSI
			===Eye Feature Mode: Lost & Found===

	~~'''Eye Feature Mode: Lost & Found'''<br>~~
	[[File:Lost & found.png]]		[[File:Lost & found.png]]

	Purpose of this functionality is to '''periodically''' generate records with all EYE Beacon list (AVL ID: 10828) and create eventual '''On Change''' records only when EYE Beacon is lost (AVL ID: 10831) or found (AVL ID: 10829). <br>		Purpose of this functionality is to '''periodically''' generate records with all EYE Beacon list (AVL ID: 10828) and create eventual '''On Change''' records only when EYE Beacon is lost (AVL ID: 10831) or found (AVL ID: 10829). <br>
	Lost and Found Beacon records only include EYE Beacon which was lost or found, not the full Beacon list. <br>		Lost and Found Beacon records only include EYE Beacon which was lost or found, not the full Beacon list. <br>
	*If multiple EYE Beacons were found or lost at the same time, multiple will be included into the record. <br>		*If multiple EYE Beacons were found or lost at the same time, multiple will be included into the record. <br>
	*If Visible Beacon List is enabled, Beacon records containing the list of visible beacons will be generated according to the configured period parameters ''Record Period on Move'' and ''Record Period on Stop''		*If Visible Beacon List is enabled, Beacon records containing the list of visible beacons will be generated according to the configured period parameters ''Record Period on Move'' and ''Record Period on Stop''
	Advanced Beacon protocol is being used to send Lost & Found records. <br>		Advanced Beacon protocol is being used to send Lost & Found records. <br>
	Note:Same AVL ID’s as for Proximity events are being used, since two features cannot work at the same time.		'''Note:''' Same AVL ID’s as for Proximity events are being used, since two features cannot work at the same time.

	*'''AVL ID: 10828''' Visible Beacon List (periodic)		*'''AVL ID: 10828''' Visible Beacon List (periodic)

Arijus.C at 07:25, 30 April 2026

2026-04-30T07:25:56Z

@@ Line 147: / Line 147: @@
 *ID - IBeacon or Eddystone specific data (UUID or Namespace/Instance ID respectively).
 *MAC - MAC address of Beacons.
 |#default =
 }}

Arijus.C at 08:30, 27 April 2026

2026-04-27T08:30:20Z

← Older revision		Revision as of 11:30, 27 April 2026
Line 17:		Line 17:
	{{#switch: {{{model}}}		{{#switch: {{{model}}}
	\|TFT100 =		\|TFT100 =
	<br><br><br><br><br>		<br><br><br><br><br><br>
	\|#default =		\|#default =
	<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>		<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>

Arijus.C at 08:29, 27 April 2026

2026-04-27T08:29:54Z

← Older revision		Revision as of 11:29, 27 April 2026
Line 17:		Line 17:
	{{#switch: {{{model}}}		{{#switch: {{{model}}}
	\|TFT100 =		\|TFT100 =
	~~<br>~~<br><br><br><br><br>		<br><br><br><br><br>
	\|#default =		\|#default =
	<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>		<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>

Arijus.C at 08:27, 27 April 2026

2026-04-27T08:27:35Z

← Older revision		Revision as of 11:27, 27 April 2026
Line 17:		Line 17:
	{{#switch: {{{model}}}		{{#switch: {{{model}}}
	\|TFT100 =		\|TFT100 =
	~~<br><br><br><br><br>~~<br><br><br><br><br><br>		<br><br><br><br><br><br>
	\|#default =		\|#default =
	<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>		<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>

Arijus.C at 08:26, 27 April 2026

2026-04-27T08:26:50Z

← Older revision		Revision as of 11:26, 27 April 2026
Line 14:		Line 14:
	* <code>Disabled</code> – Functionality disabled.<br>		* <code>Disabled</code> – Functionality disabled.<br>
	* <code>All</code> – Any visible beacon is detected (Max. 100).<br>		* <code>All</code> – Any visible beacon is detected (Max. 100).<br>
	* <code>Configured</code> – Only data received from listed beacons in <span style=color:#F6A83E>Beacon List</span> is sent to server.<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>		* <code>Configured</code> – Only data received from listed beacons in <span style=color:#F6A83E>Beacon List</span> is sent to server.
			{{#switch: {{{model}}}
			\|TFT100 =
			<br><br><br><br><br><br><br><br><br><br><br>
			\|#default =
			<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>
			}}
	==EYE Beacon Settings==		==EYE Beacon Settings==
	[[File:Beacon detection.gif]]		[[File:Beacon detection.gif]]