Template:FM36 CAN adapters - Revision history

Marek.rakalovic: /* SCAN function */

2018-08-09T10:31:45Z

SCAN function

← Older revision		Revision as of 13:31, 9 August 2018
Line 87:		Line 87:
	===SCAN function===		===SCAN function===
	Scan function can be used when {{{model\|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.		Scan function can be used when {{{model\|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.
	<br> [[Image:~~FM36XY_scan_function~~.png\|589px]] <br>		<br> [[Image:FM36YX_scan_function.png\|589px]] <br>
	CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.		CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.

Marek.rakalovic: /* SCAN function */

2018-08-09T10:31:29Z

SCAN function

← Older revision		Revision as of 13:31, 9 August 2018
Line 87:		Line 87:
	===SCAN function===		===SCAN function===
	Scan function can be used when {{{model\|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.		Scan function can be used when {{{model\|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.
	<br> [[Image:~~FM36M1_scan_function~~.png\|589px]] <br>		<br> [[Image:FM36XY_scan_function.png\|589px]] <br>
	CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.		CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.

	===Offline configuration===		===Offline configuration===
	Comming soon		Comming soon

Marek.rakalovic: /* Connecting {{{model|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200 */

2018-08-09T10:29:16Z

Connecting {{{model|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200

← Older revision		Revision as of 13:29, 9 August 2018
Line 66:		Line 66:
	{{{model\|FM36YX}}} connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. {{{model\|FM36YX}}} has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.		{{{model\|FM36YX}}} connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. {{{model\|FM36YX}}} has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.
	<br>		<br>
	[[File:~~FM36M1_CAN_Adapter_connection_cable_pinout~~.png\|800px]]		[[File:LV-CAN200 ALL-CAN300 Adapter connection cable pinout.png\|800px]]

	<br>		<br>

Marek.rakalovic: /* Connecting {{{model|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200 */

2018-08-09T10:25:52Z

Connecting {{{model|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200

← Older revision		Revision as of 13:25, 9 August 2018
Line 66:		Line 66:
	{{{model\|FM36YX}}} connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. {{{model\|FM36YX}}} has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.		{{{model\|FM36YX}}} connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. {{{model\|FM36YX}}} has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.
	<br>		<br>
	[[File:~~LV-CAN200 ALL-CAN300 Adapter connection cable pinout~~.png\|800px]]		[[File:FM36M1_CAN_Adapter_connection_cable_pinout.png\|800px]]

	<br>		<br>

Marek.rakalovic: /* {{{model|FM36YX}}} ALL-CAN300 and LV-CAN200 parameters configuration */

2018-08-09T10:03:08Z

{{{model|FM36YX}}} ALL-CAN300 and LV-CAN200 parameters configuration

← Older revision		Revision as of 13:03, 9 August 2018
Line 87:		Line 87:
	===SCAN function===		===SCAN function===
	Scan function can be used when {{{model\|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.		Scan function can be used when {{{model\|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.
	<br> [[Image:~~FM36YX_scan_function~~.png\|589px]] <br>		<br> [[Image:FM36M1_scan_function.png\|589px]] <br>
	CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.		CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.
	===Offline configuration===		===Offline configuration===

Marek.rakalovic: /* Connecting {{{model|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200 */

2018-08-09T08:33:09Z

Connecting {{{model|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200

← Older revision		Revision as of 11:33, 9 August 2018
Line 64:		Line 64:
	==Connecting {{{model\|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200==		==Connecting {{{model\|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200==

	~~FM3612~~ connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. ~~FM3612~~ has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.		{{{model\|FM36YX}}} connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. {{{model\|FM36YX}}} has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.
	<br>		<br>
	[[File:LV-CAN200 ALL-CAN300 Adapter connection cable pinout.png\|800px]]		[[File:LV-CAN200 ALL-CAN300 Adapter connection cable pinout.png\|800px]]

Mantas.slipaitis at 09:00, 12 June 2018

2018-06-12T09:00:22Z

← Older revision		Revision as of 12:00, 12 June 2018
Line 27:		Line 27:
	===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===		===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===
	----		----
	LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value (more CAN commands can be found in section [[~~FM3622_SMS~~/GPRS_command_list\|SMS/GPRS command list]]):<br/>''"lvcansetprog X"''<br/>		LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value (more CAN commands can be found in section [[{{{model\|FM3622}}}_SMS/GPRS_command_list\|SMS/GPRS command list]]):<br/>''"lvcansetprog X"''<br/>

	===Selecting LV-CAN200 and ALL-CAN300 program number manually===		===Selecting LV-CAN200 and ALL-CAN300 program number manually===

Mantas.slipaitis at 08:59, 12 June 2018

2018-06-12T08:59:43Z

← Older revision		Revision as of 11:59, 12 June 2018
Line 27:		Line 27:
	===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===		===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===
	----		----
	LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value (more CAN commands can be found in section [[~~FM36_SMS~~/GPRS_command_list~~#Commands_related_to_LV-CAN200.2FALL-CAN300~~]]):<br/>''"lvcansetprog X"''<br/>		LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value (more CAN commands can be found in section [[FM3622_SMS/GPRS_command_list\|SMS/GPRS command list]]):<br/>''"lvcansetprog X"''<br/>

	===Selecting LV-CAN200 and ALL-CAN300 program number manually===		===Selecting LV-CAN200 and ALL-CAN300 program number manually===

Simkunas.ma at 08:51, 12 June 2018

2018-06-12T08:51:53Z

← Older revision		Revision as of 11:51, 12 June 2018
Line 27:		Line 27:
	===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===		===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===
	----		----
	LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value (more CAN commands can be found in section [[~~Template:~~FM36_SMS/GPRS_command_list#Commands_related_to_LV-CAN200.2FALL-CAN300]]):<br/>''"lvcansetprog X"''<br/>		LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value (more CAN commands can be found in section [[FM36_SMS/GPRS_command_list#Commands_related_to_LV-CAN200.2FALL-CAN300]]):<br/>''"lvcansetprog X"''<br/>

	===Selecting LV-CAN200 and ALL-CAN300 program number manually===		===Selecting LV-CAN200 and ALL-CAN300 program number manually===

Mantas.slipaitis at 08:41, 31 May 2018

2018-05-31T08:41:46Z

← Older revision		Revision as of 11:41, 31 May 2018
Line 58:		Line 58:
	SIMPLE-CAN works in the '''listening mode only''', so that not all the data available on the CAN-BUS may be received using this solution. '''The device automatically sets CAN L/H polarity''', but the calibration has to be always performed during installation process. Connection of previously calibrated unit to another car needs new calibration because the reader '''automatically adjusts signal level and speed''' to different CAN buses. The device also '''automatically adapts''' to the found '''noise level'''.		SIMPLE-CAN works in the '''listening mode only''', so that not all the data available on the CAN-BUS may be received using this solution. '''The device automatically sets CAN L/H polarity''', but the calibration has to be always performed during installation process. Connection of previously calibrated unit to another car needs new calibration because the reader '''automatically adjusts signal level and speed''' to different CAN buses. The device also '''automatically adapts''' to the found '''noise level'''.

	[[Image:Fmb120_simplecan_pinout.png\|800px~~\|center~~]]		[[Image:Fmb120_simplecan_pinout.png\|800px]]
			<br>
	When power supply is connected, the LED shines continuously. It means that device is waiting for calibration. '''Calibration process''' has to be carried out when CAN-BUS twisted pair is tightened on SIMPLE-CAN and when ignition is ON. Please press the switch briefly and wait for the LED to start blinking every second. Automatic calibration process takes up to 10 seconds depending on the vehicle's model. Correct calibration process is confirmed by LED starting to blink every 2 seconds (when the CAN-BUS is active). When the CAN-BUS enters sleep mode, SIMPLE-CAN device also enters sleep mode and takes 1.6mA @ 12V. In the sleep mode LED does not shine. If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.		When power supply is connected, the LED shines continuously. It means that device is waiting for calibration. '''Calibration process''' has to be carried out when CAN-BUS twisted pair is tightened on SIMPLE-CAN and when ignition is ON. Please press the switch briefly and wait for the LED to start blinking every second. Automatic calibration process takes up to 10 seconds depending on the vehicle's model. Correct calibration process is confirmed by LED starting to blink every 2 seconds (when the CAN-BUS is active). When the CAN-BUS enters sleep mode, SIMPLE-CAN device also enters sleep mode and takes 1.6mA @ 12V. In the sleep mode LED does not shine. If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.

	==Connecting {{{model\|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200==		==Connecting {{{model\|FM36YX}}} CAN adapters ALL-CAN300 and LV-CAN200==

	Connect LV-CAN200/ALL-CAN300 Pin 5 to {{{model\|FM36YX}}} Pin 12 (INPUT 5) or Pin 6 (INPUT 6) and connect light vehicle CAN adapter to other end of the cable.<br/>Connect CAN adapter Pin 1 and Pin 2 to car's CAN bus. CAN interface location of the supported light vehicle is described on mounting scheme.~~<br/>~~Connect car power supply lines to Pin 3 positive, Pin 4 negative.<br/>Pin 9 and 10 connections are optional depending on the exact car model.<br/>For exact pinout see the sticker of light vehicle CAN adapter.		FM3612 connection with CAN adapter is different than with other FM devices, when connecting ALL-CAN300 and LV-CAN200 adapters. FM3612 has closed USB connector and CAN adapter is connected with INPUT 5 and INPUT 6 wires as shown in figure below.
			<br>
			[[File:LV-CAN200 ALL-CAN300 Adapter connection cable pinout.png\|800px]]

			<br>
			Connect LV-CAN200/ALL-CAN300 Pin 5 to {{{model\|FM36YX}}} Pin 12 (INPUT 5) or Pin 6 (INPUT 6) and connect light vehicle CAN adapter to other end of the cable.<br/>
			Connect CAN adapter Pin 1 and Pin 2 to car's CAN bus. CAN interface location of the supported light vehicle is described on mounting scheme. Connect car power supply lines to Pin 3 positive, Pin 4 negative.<br/>
			Pin 9 and 10 connections are optional depending on the exact car model.<br/>For exact pinout see the sticker of light vehicle CAN adapter.<br/>

	~~[[Image:FMB120_lv-can200_pinout.png\|800px\|center]]~~
	~~[[Image:FMB120_all-can300_pinout.png\|800px\|center]]~~

	{\| class="wikitable" style="border-style: solid; border-width: 0px"		{\| class="wikitable" style="border-style: solid; border-width: 0px"