Template:FMB640 CAN adapters - Revision history

Donatas.Mazonas: /* Entering manually */

2025-08-11T09:30:49Z

Entering manually

← Older revision		Revision as of 12:30, 11 August 2025
Line 106:		Line 106:
	Steps to set program number:		Steps to set program number:
	[[Image:Fmb120_adapter_led.png\|300px\|right\|thumb\|LV-CAN200, ALL-CAN300 back]]		[[Image:Fmb120_adapter_led.png\|300px\|right\|thumb\|LV-CAN200, ALL-CAN300 back]]
			{\| class="wikitable" style="width:70%;"
	\|+		\|+
	\|-		\|-

Donatas.Mazonas: Corrected factual mistake about number of ECAN02s required.

2025-07-24T10:19:50Z

Corrected factual mistake about number of ECAN02s required.

← Older revision		Revision as of 13:19, 24 July 2025
Line 35:		Line 35:
	* [[LV-CAN200]]/[[ALL-CAN300]]		* [[LV-CAN200]]/[[ALL-CAN300]]
	* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.		* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
	* [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''ECAN02''' must be used.)		* [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two ECAN02 adapters''' must be used.)
	* {{{model\|FMB640}}} device		* {{{model\|FMB640}}} device
	* Pliers		* Pliers

Simonas.stankaitis at 11:49, 30 August 2024

2024-08-30T11:49:44Z

← Older revision		Revision as of 14:49, 30 August 2024
Line 7:		Line 7:

	==Installing CAN adapter with {{{model\|FMB640}}} device==		==Installing CAN adapter with {{{model\|FMB640}}} device==
	===Installing LV-CAN200/ALL-CAN300~~/CAN-CONTROL~~===		===Installing LV-CAN200/ALL-CAN300===

	You can watch [[LV-CAN200]]/[[ALL-CAN300]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below.		You can watch [[LV-CAN200]]/[[ALL-CAN300]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below.
	====Tools needed for installation====		====Tools needed for installation====
	* [[LV-CAN200]]/[[ALL-CAN300~~]]/[[CAN-CONTROL~~]]		* [[LV-CAN200]]/[[ALL-CAN300]]
	* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.		* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
	* {{{model\|FMB640}}} device		* {{{model\|FMB640}}} device
Line 30:		Line 30:
	<br />		<br />
	[[File:FMX640lvall.png\|1000px\|none\|thumb\|LV-CAN200/ALL-CAN300 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]		[[File:FMX640lvall.png\|1000px\|none\|thumb\|LV-CAN200/ALL-CAN300 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]
	~~[[File:FMX640can.png\|1000px\|none\|thumb\|CAN-CONTROL connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]~~

	===Installing LV-CAN200/ALL-CAN300 + ECAN02===		===Installing LV-CAN200/ALL-CAN300 + ECAN02===
Line 44:		Line 43:

	====Installation steps====		====Installation steps====
	# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300~~/CAN-CONTROL~~ installation]].		# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300 installation]].
	# Connect the appropriate CAN bus pair of wires between the CAN adapter and [[ECAN02]]:		# Connect the appropriate CAN bus pair of wires between the CAN adapter and [[ECAN02]]:
	#: If '''CAN1 line''' need to be connected as specified in the connection scheme:		#: If '''CAN1 line''' need to be connected as specified in the connection scheme:
Line 106:		Line 105:

	Steps to set program number:		Steps to set program number:
	[[Image:Fmb120_adapter_led.png\|300px\|right\|thumb\|LV-CAN200, ALL-CAN300 back]]~~[[File:Can_control_back-2.png\|300px\|right\|thumb\|CAN-CONTROL back]]~~		[[Image:Fmb120_adapter_led.png\|300px\|right\|thumb\|LV-CAN200, ALL-CAN300 back]]
	~~{\| class="wikitable" style="width:70%;"~~
	\|+		\|+
	\|-		\|-
	\| rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" \| For<br/>ALL-CAN300<br/>LV-CAN200<br/>3 digit		\| rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" \| For<br/>ALL-CAN300<br/>LV-CAN200<br/>3 digit
	\| rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" \| For<br/>ALL-CAN300<br/>LV-CAN200<br/>4 digit		\| rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" \| For<br/>ALL-CAN300<br/>LV-CAN200<br/>4 digit
	\| rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" \| For<br/>LV-CAN200~~<br/>CAN-CONTROL~~<br/>5 digit		\| rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" \| For<br/>LV-CAN200<br/>5 digit
	\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" \|1. Hold SWITCH down until LED stars blinking.		\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" \|1. Hold SWITCH down until LED stars blinking.
	\|-		\|-
Line 336:		Line 334:
	\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes		\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes
	\|-		\|-
	~~\| colspan="3" style="border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" \| '''CAN-CONTROL specific commands'''~~
	\|-
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| lvcanopenalldoors~~
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Open [unlock] all doors~~
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes~~
	\|-
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| lvcanclosealldoors~~
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Close [lock] all doors~~
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes~~
	\|-
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| lvcanopentrunk~~
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Open [unlock] trunk~~
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes~~
	\|-
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| lvcanturninglights~~
	\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| One flash of all turn lights ordered trough accidental / blinking turn light switch
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes~~
	\|-
	~~<!-- \| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| lvcanwindowsopen:#~~
	\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| open windows # sec. (one sending of command will cause the windows to continue opening for xx seconds). #: [1,3,5...25,27,29]
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes~~
	\|-
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| lvcanwindowsclose:#~~
	\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| close windows # sec. (one sending of command will cause thewindows to continue closing for xx seconds). #: [1,3,5...25,27,29]
	~~\| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" \| Yes~~
	~~-->~~
	\|}		\|}
			<br />

	===CAN Adapter State Flags===		===CAN Adapter State Flags===
Line 368:		Line 341:
	CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model\|FMB640}}}. {{{model\|FMB640}}} device stores these flags in hexadecimal format, as one variable. Below is a list of kept flags and how to retrieve them.<br /> The full list of state flags is stored only by:		CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model\|FMB640}}}. {{{model\|FMB640}}} device stores these flags in hexadecimal format, as one variable. Below is a list of kept flags and how to retrieve them.<br /> The full list of state flags is stored only by:
	* [[ALL-CAN300]]		* [[ALL-CAN300]]
	~~Only '''security state flags''' are stored by:~~
	* [[CAN-CONTROL]]

	{\| class="wikitable" style="width:70%;"		{\| class="wikitable" style="width:70%;"

Simonas.stankaitis at 08:53, 30 August 2024

2024-08-30T08:53:53Z

← Older revision		Revision as of 11:53, 30 August 2024
Line 2:		Line 2:
	* [[LV-CAN200]]		* [[LV-CAN200]]
	* [[ALL-CAN300]]		* [[ALL-CAN300]]
	* [[CAN-CONTROL]]
	* [[ECAN02]]		* [[ECAN02]]

Jonas.sterbavicius at 10:49, 23 June 2023

2023-06-23T10:49:43Z

← Older revision		Revision as of 13:49, 23 June 2023
Line 3:		Line 3:
	* [[ALL-CAN300]]		* [[ALL-CAN300]]
	* [[CAN-CONTROL]]		* [[CAN-CONTROL]]
	* [[~~SIMPLE-CAN~~]] ~~/ [[MINI-CAN]]~~		* [[ECAN02]]


	__TOC__		__TOC__
Line 33:		Line 32:
	[[File:FMX640lvall.png\|1000px\|none\|thumb\|LV-CAN200/ALL-CAN300 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]		[[File:FMX640lvall.png\|1000px\|none\|thumb\|LV-CAN200/ALL-CAN300 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]
	[[File:FMX640can.png\|1000px\|none\|thumb\|CAN-CONTROL connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]		[[File:FMX640can.png\|1000px\|none\|thumb\|CAN-CONTROL connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]
	~~<br />~~
	===Installing LV-CAN200/ALL-CAN300 + ~~SIMPLE-CAN / MINI-CAN~~===		===Installing LV-CAN200/ALL-CAN300 + ECAN02===
	~~----~~
	You can watch [[LV-CAN200]]/[[ALL-CAN300]] + [[SIMPLE-CAN]] / [[MINI-CAN]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w?t=356 '''here'''] or follow connection instructions below.
	====Tools needed for installation====		====Tools needed for installation====
	* [[LV-CAN200]]/[[ALL-CAN300]]		* [[LV-CAN200]]/[[ALL-CAN300]]
	* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.		* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
	* [[~~SIMPLE-CAN]] / [[MINI-CAN~~]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''~~two SIMPLE-CAN's / MINI-CAN's~~''' must be used.)		* [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''ECAN02''' must be used.)
	* {{{model\|FMB640}}} device		* {{{model\|FMB640}}} device
	* Pliers		* Pliers
Line 49:		Line 46:
	====Installation steps====		====Installation steps====
	# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].		# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].
	# Connect the appropriate CAN bus pair of wires between CAN adapter and [[~~SIMPLE-CAN]] / [[MINI-CAN~~]]:		# Connect the appropriate CAN bus pair of wires between the CAN adapter and [[ECAN02]]:
	#: If '''CAN1 line''' need to be connected as specified in the connection scheme:		#: If '''CAN1 line''' need to be connected as specified in the connection scheme:
	## Connect CAN adapter <span style="color:brown;">'''CAN1 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[~~SIMPLE-CAN]] / [[MINI-CAN~~]].		## Connect CAN adapter <span style="color:brown;">'''CAN1 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[ECAN02]].
	## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN1 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[~~SIMPLE-CAN]] / [[MINI-CAN~~]].		## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN1 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[ECAN02]].
	#: If '''CAN2 line''' need to be connected as specified in the connection scheme:		#: If '''CAN2 line''' need to be connected as specified in the connection scheme:
	## Connect CAN adapter <span style="color:green;">'''CAN2 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[~~SIMPLE-CAN]] / [[MINI-CAN~~]].		## Connect CAN adapter <span style="color:green;">'''CAN2 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[ECAN02]].
	## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:green;">'''CAN2 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[~~SIMPLE-CAN]] / [[MINI-CAN~~]].<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap CAN L and CAN H lines.<br />Not all CAN adapter wires may be used in vehicle.</b></td></table></p>		## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:green;">'''CAN2 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[ECAN02]].<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap CAN L and CAN H lines.<br />Not all CAN adapter wires may be used in the vehicle.</b></td></table></p>
	# Fasten [[~~SIMPLE-CAN]] / [[MINI-CAN~~]] '''~~between~~ vehicle CAN bus wires''' according to the connection scheme. '''~~It doeasn't matter which wire is~~ on ~~which side.~~'''<p>~~[[File:SIMPLE-CAN_connection.gif\|none]]~~</p>		# Fasten [[ECAN02]] '''on vehicle CAN bus wires''' according to the connection scheme. '''Make sure CAN H and CAN L of vehicle corresponds to CAN H, CAN L markings on [[ECAN02]]''' PCB.<p></p>
	# Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model\|FMB640}}} power wires.<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap power supply lines.<br />Make sure that voltage does not exceed 30V.</b></td></table></p>		# Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model\|FMB640}}} power wires.<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap power supply lines.<br />Make sure that voltage does not exceed 30V.</b></td></table></p>
	~~# Switch vehicle '''ignition to ACC''' position.~~
	# [[SIMPLE-CAN]] / [[MINI-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif\|none\|thumb\|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''.<br /><br /><br />]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif\|none\|thumb\|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</b></td></table></p>
	# Configure CAN adapter to read CAN bus data by setting its '''program number''' - [[{{{model\|FMB640}}}_CAN_adapters#CAN_Adapter_Configuration\|CAN Adapter configuration]]		# Configure CAN adapter to read CAN bus data by setting its '''program number''' - [[{{{model\|FMB640}}}_CAN_adapters#CAN_Adapter_Configuration\|CAN Adapter configuration]]
	~~<br />~~

	==CAN Adapter Configuration==		==CAN Adapter Configuration==

Gediminas.suminas at 06:35, 14 October 2020

2020-10-14T06:35:36Z

Sandra.Gasyte at 19:19, 12 August 2020

2020-08-12T19:19:14Z

Sandra.Gasyte at 19:14, 12 August 2020

2020-08-12T19:14:21Z

← Older revision		Revision as of 22:14, 12 August 2020
Line 3:		Line 3:
	* [[ALL-CAN300]]		* [[ALL-CAN300]]
	* [[CAN-CONTROL]]		* [[CAN-CONTROL]]
	* [[SIMPLE-CAN]]		* [[SIMPLE-CAN]] / [[MINI-CAN]]

Gediminas.suminas: Protected "Template:FMB640 CAN adapters" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2020-05-29T11:17:36Z

Protected "Template:FMB640 CAN adapters" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision		Revision as of 14:17, 29 May 2020
(No difference)

Gediminas.suminas: /* Entering via SMS command */

2020-05-29T11:08:54Z

Entering via SMS command

← Older revision		Revision as of 14:08, 29 May 2020
Line 92:		Line 92:
	* [[{{{model\|FMB640}}}_Sleep_modes#Deep_Sleep_mode\|Deep Sleep]] - Program No. will be set after device wake up.		* [[{{{model\|FMB640}}}_Sleep_modes#Deep_Sleep_mode\|Deep Sleep]] - Program No. will be set after device wake up.
	* [[{{{model\|FMB640}}}_Sleep_modes#Online_Deep_Sleep_mode\|Online Deep Sleep]] - Program No. will be set immediately.		* [[{{{model\|FMB640}}}_Sleep_modes#Online_Deep_Sleep_mode\|Online Deep Sleep]] - Program No. will be set immediately.
	* [[{{{model\|FMB640}}}_Sleep_modes#Ultra_Deep_Sleep_mode\|Ultra Deep Sleep]] - Program No. will be set after device wake up.

	====Entering via Teltonika Configurator====		====Entering via Teltonika Configurator====

← Older revision		Revision as of 09:35, 14 October 2020
Line 23:		Line 23:
	====Installation steps====		====Installation steps====
	# Be ready with a vehicle '''connection scheme''' that you have received from a Teltonika Sales Representative.		# Be ready with a vehicle '''connection scheme''' that you have received from a Teltonika Sales Representative.
	# '''Check the scheme''' for the current vehicle connection. Look for connectors matching '''PINs numbers''' and colors (~~may be~~ different) according to connection scheme.		# '''Check the scheme''' for the current vehicle connection. Look for connectors matching '''PINs numbers''' and colors (maybe different) according to connection scheme.
	# Connect CAN adapter with {{{model\|FMB640}}}:		# Connect CAN adapter with {{{model\|FMB640}}}:
	## Connect CAN adapter's MINI USB to USB of {{{model\|FMB640}}}.		## Connect CAN adapter's MINI USB to USB of {{{model\|FMB640}}}.
Line 49:		Line 49:
	====Installation steps====		====Installation steps====
	# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].		# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].
	# Connect the ~~appropiate~~ CAN bus pair of wires between CAN adapter and [[SIMPLE-CAN]] / [[MINI-CAN]]:		# Connect the appropriate CAN bus pair of wires between CAN adapter and [[SIMPLE-CAN]] / [[MINI-CAN]]:
	#: If '''CAN1 line''' need to be connected as specified in connection scheme:		#: If '''CAN1 line''' need to be connected as specified in the connection scheme:
	## Connect CAN adapter <span style="color:brown;">'''CAN1 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]] / [[MINI-CAN]].		## Connect CAN adapter <span style="color:brown;">'''CAN1 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]] / [[MINI-CAN]].
	## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN1 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]] / [[MINI-CAN]].		## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN1 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]] / [[MINI-CAN]].
	#: If '''CAN2 line''' need to be connected as specified in connection scheme:		#: If '''CAN2 line''' need to be connected as specified in the connection scheme:
	## Connect CAN adapter <span style="color:green;">'''CAN2 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]] / [[MINI-CAN]].		## Connect CAN adapter <span style="color:green;">'''CAN2 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]] / [[MINI-CAN]].
	## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:green;">'''CAN2 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]] / [[MINI-CAN]].<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap CAN L and CAN H lines.<br />Not all CAN adapter wires may be used in vehicle.</b></td></table></p>		## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:green;">'''CAN2 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]] / [[MINI-CAN]].<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap CAN L and CAN H lines.<br />Not all CAN adapter wires may be used in vehicle.</b></td></table></p>
Line 109:		Line 109:
	* Vehicle ignition must be ON		* Vehicle ignition must be ON

	Depending on used CAN Adapter, length of setup sequence will vary.		Depending on the used CAN Adapter, the length of the setup sequence will vary.

	Steps to set program number:		Steps to set program number:
Line 372:		Line 372:
	===CAN Adapter State Flags===		===CAN Adapter State Flags===
	----		----
	CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model\|FMB640}}}. {{{model\|FMB640}}} device stores these flags in hexadecimal format, as one variable. ~~Bellow~~ is a list of kept flags and how to retrieve them.<br /> The full list of state flags is stored only by:		CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model\|FMB640}}}. {{{model\|FMB640}}} device stores these flags in hexadecimal format, as one variable. Below is a list of kept flags and how to retrieve them.<br /> The full list of state flags is stored only by:
	* [[ALL-CAN300]]		* [[ALL-CAN300]]
	Only '''security state flags''' are stored by:		Only '''security state flags''' are stored by:
Line 568:		Line 568:
	==LV-CAN200/ALL-CAN300 Important Information==		==LV-CAN200/ALL-CAN300 Important Information==
	===Program Number logic change===		===Program Number logic change===
	Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200/ALL-CAN300 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. ~~Device~~ still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - device number will turn into "1247". In Bootloader only 4-digit format is available, just add "1" to the front of the needed program number.		Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200/ALL-CAN300 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. The device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - device number will turn into "1247". In Bootloader only 4-digit format is available, just add "1" to the front of the needed program number.

	===Example===		===Example===
	When using older connection schemes where program number displayed as 3-digit program number:		When using older connection schemes where the program number displayed as 3-digit program number:
	[[Image:Fmb120_can_prog_number.png\|600px\|none]]		[[Image:Fmb120_can_prog_number.png\|600px\|none]]

	Using LV-CAN200/ALL-CAN300 Bootloader from soft version 2017-09-27 it is necessary to add "1" to the front of program number:		Using LV-CAN200/ALL-CAN300 Bootloader from soft version 2017-09-27 it is necessary to add "1" to the front of the program number:
	[[Image:Fmb120_can_updater.png\|400px\|none]]		[[Image:Fmb120_can_updater.png\|400px\|none]]

Line 592:		Line 592:
	* Automatically adjusts signal level and speed.<br/><br/>		* Automatically adjusts signal level and speed.<br/><br/>

	SIMPLE-CAN works in the '''listening mode only''', so that not all the data available on the CAN-BUS may be received using this solution. '''The device automatically sets CAN L/H polarity''', but the calibration has to be always performed during installation process. Connection of previously calibrated unit to another car needs new calibration because the reader '''automatically adjusts signal level and speed''' to different CAN buses. The device also '''automatically adapts''' to the found '''noise level'''.		SIMPLE-CAN works in the '''listening mode only''', so that not all the data available on the CAN-BUS may be received using this solution. '''The device automatically sets CAN L/H polarity''', but the calibration has to be always performed during the installation process. Connection of a previously calibrated unit to another car needs new calibration because the reader '''automatically adjusts signal level and speed''' to different CAN buses. The device also '''automatically adapts''' to the found '''noise level'''.

	[[Image:Fmb120_simplecan_pinout.png\|800px\|none]]		[[Image:Fmb120_simplecan_pinout.png\|800px\|none]]

	When power supply is connected, the LED shines continuously. It means that device is waiting for calibration. <br/>'''Calibration process''' has to be carried out when CAN-BUS twisted pair is tightened on SIMPLE-CAN and when ignition is ON.		When the power supply is connected, the LED shines continuously. It means that the device is waiting for calibration. <br/>'''Calibration process''' has to be carried out when CAN-BUS twisted pair is tightened on SIMPLE-CAN and when the ignition is ON.
	*Please press the switch briefly and wait for the LED to start blinking every second.		*Please press the switch briefly and wait for the LED to start blinking every second.
	* Automatic calibration process takes up to 10 seconds depending on the vehicle's model.		* Automatic calibration process takes up to 10 seconds depending on the vehicle's model.
	*Correct calibration process is confirmed by LED starting to blink every 2 seconds (when the CAN-BUS is active).		*Correct calibration process is confirmed by LED starting to blink every 2 seconds (when the CAN-BUS is active).
	*When the CAN-BUS enters sleep mode, SIMPLE-CAN device also enters sleep mode and takes 1.6mA @ 12V. In the sleep mode LED does not shine.		*When the CAN-BUS enters sleep mode, the SIMPLE-CAN device also enters sleep mode and takes 1.6mA @ 12V. In the sleep mode LED does not shine.
	*If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.-->		*If after calibration process LED shines continuously, it means that the device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.-->

← Older revision		Revision as of 22:19, 12 August 2020
Line 34:		Line 34:
	[[File:FMX640can.png\|1000px\|none\|thumb\|CAN-CONTROL connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]		[[File:FMX640can.png\|1000px\|none\|thumb\|CAN-CONTROL connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]
	<br />		<br />
	===Installing LV-CAN200/ALL-CAN300 + SIMPLE-CAN===		===Installing LV-CAN200/ALL-CAN300 + SIMPLE-CAN / MINI-CAN===
	----		----
	You can watch [[LV-CAN200]]/[[ALL-CAN300]] + [[SIMPLE-CAN]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w?t=356 '''here'''] or follow connection instructions below.		You can watch [[LV-CAN200]]/[[ALL-CAN300]] + [[SIMPLE-CAN]] / [[MINI-CAN]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w?t=356 '''here'''] or follow connection instructions below.
	====Tools needed for installation====		====Tools needed for installation====
	* [[LV-CAN200]]/[[ALL-CAN300]]		* [[LV-CAN200]]/[[ALL-CAN300]]
	* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.		* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
	* [[SIMPLE-CAN]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two SIMPLE-CAN's''' must be used.)		* [[SIMPLE-CAN]] / [[MINI-CAN]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two SIMPLE-CAN's / MINI-CAN's''' must be used.)
	* {{{model\|FMB640}}} device		* {{{model\|FMB640}}} device
	* Pliers		* Pliers
Line 49:		Line 49:
	====Installation steps====		====Installation steps====
	# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].		# Follow the same '''1, 2, 3''' installation steps as with [[{{{model\|FMB640}}}_CAN_adapters#Installation_steps\| LV-CAN200/ALL-CAN300/CAN-CONTROL installation]].
	# Connect the appropiate CAN bus pair of wires between CAN adapter and [[SIMPLE-CAN]]:		# Connect the appropiate CAN bus pair of wires between CAN adapter and [[SIMPLE-CAN]] / [[MINI-CAN]]:
	#: If '''CAN1 line''' need to be connected as specified in connection scheme:		#: If '''CAN1 line''' need to be connected as specified in connection scheme:
	## Connect CAN adapter <span style="color:brown;">'''CAN1 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]].		## Connect CAN adapter <span style="color:brown;">'''CAN1 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]] / [[MINI-CAN]].
	## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN1 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]].		## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN1 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]] / [[MINI-CAN]].
	#: If '''CAN2 line''' need to be connected as specified in connection scheme:		#: If '''CAN2 line''' need to be connected as specified in connection scheme:
	## Connect CAN adapter <span style="color:green;">'''CAN2 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]].		## Connect CAN adapter <span style="color:green;">'''CAN2 L'''</span> to <span style="color:brown;">'''CAN L'''</span> of [[SIMPLE-CAN]] / [[MINI-CAN]].
	## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:green;">'''CAN2 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]].<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap CAN L and CAN H lines.<br />Not all CAN adapter wires may be used in vehicle.</b></td></table></p>		## Connect CAN adapter <span style='color:white;text-decoration:line-through'><span style="color:green;">'''CAN2 H'''</span></span> to <span style='color:white;text-decoration:line-through'><span style="color:brown;">'''CAN H'''</span></span> of [[SIMPLE-CAN]] / [[MINI-CAN]].<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap CAN L and CAN H lines.<br />Not all CAN adapter wires may be used in vehicle.</b></td></table></p>
	# Fasten [[SIMPLE-CAN]] '''between vehicle CAN bus wires''' according to the connection scheme. '''It doeasn't matter which wire is on which side.'''<p>[[File:SIMPLE-CAN_connection.gif\|none]]</p>		# Fasten [[SIMPLE-CAN]] / [[MINI-CAN]] '''between vehicle CAN bus wires''' according to the connection scheme. '''It doeasn't matter which wire is on which side.'''<p>[[File:SIMPLE-CAN_connection.gif\|none]]</p>
	# Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model\|FMB640}}} power wires.<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap power supply lines.<br />Make sure that voltage does not exceed 30V.</b></td></table></p>		# Connect CAN adapter '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model\|FMB640}}} power wires.<p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>Do not swap power supply lines.<br />Make sure that voltage does not exceed 30V.</b></td></table></p>
	# Switch vehicle '''ignition to ACC''' position.		# Switch vehicle '''ignition to ACC''' position.
	# [[SIMPLE-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif\|none\|thumb\|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''.<br /><br /><br />]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif\|none\|thumb\|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</b></td></table></p>		# [[SIMPLE-CAN]] / [[MINI-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif\|none\|thumb\|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''.<br /><br /><br />]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif\|none\|thumb\|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><p><table><td>[[File:Alert.png\|50px\|left\|link=]]</td><td><b>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</b></td></table></p>
	# Configure CAN adapter to read CAN bus data by setting its '''program number''' - [[{{{model\|FMB640}}}_CAN_adapters#CAN_Adapter_Configuration\|CAN Adapter configuration]]		# Configure CAN adapter to read CAN bus data by setting its '''program number''' - [[{{{model\|FMB640}}}_CAN_adapters#CAN_Adapter_Configuration\|CAN Adapter configuration]]
	<br />		<br />