Template:FMB GPRS settings - Revision history

Paulius.peciulis at 08:40, 26 March 2024

2024-03-26T08:40:15Z

← Older revision		Revision as of 11:40, 26 March 2024
Line 26:		Line 26:
	*When disabled (option introduced from 03.29.00.Rev.10 base firmware version) device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.		*When disabled (option introduced from 03.29.00.Rev.10 base firmware version) device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.
	GPRS Authentication:		GPRS Authentication:
	* Some operators use a specific type of ~~authentication~~ for GPRS sessions – CHAP or PAP. ~~If any of these is~~ used~~, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet"~~. Information about APN and ~~authentication type~~ should be provided by your GSM operator. <br />		* Some operators use a specific type of authentification for GPRS sessions. It could be CHAP or PAP authentifications. In configurator's GPRS settings there are option to select which GPRS authentification could be used. Information about the APN details and authentification should be provided by your GSM operator. <br />
	{{{txt_sim2\|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}		{{{txt_sim2\|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}
	<br>		<br>

Airidas.S at 12:17, 28 December 2023

2023-12-28T12:17:01Z

← Older revision		Revision as of 15:17, 28 December 2023
Line 11:		Line 11:
	*Access point name password (optional – depending on operator). <br>		*Access point name password (optional – depending on operator). <br>
	Limit connection errors:		Limit connection errors:
	*When enabled device will try to open GPRS or socket and if it fails it will introduce additional delays on the next try. The delays are incremented based on the consecutive network errors received:		*When enabled (default option) device will try to open GPRS or socket and if it fails it will introduce additional delays on the next try. The delays are incremented based on the consecutive network errors received:
	1. No delays<br>		1. No delays<br>
	2. 1 minute.<br>		2. 1 minute.<br>
Line 24:		Line 24:
	Once 10 minutes is reached and if errors continue to occur the delay will not reset. When connection is succesful the delay resets. This feature is enabled for every socket and SIM1 or SIM2 (if available) GPRS context.		Once 10 minutes is reached and if errors continue to occur the delay will not reset. When connection is succesful the delay resets. This feature is enabled for every socket and SIM1 or SIM2 (if available) GPRS context.

	*When disabled device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.		*When disabled (option introduced from 03.29.00.Rev.10 base firmware version) device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.
	GPRS Authentication:		GPRS Authentication:
	* Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />		* Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />

Airidas.S: /* GPRS Settings */

2023-12-28T12:09:51Z

GPRS Settings

← Older revision		Revision as of 15:09, 28 December 2023
Line 1:		Line 1:
	==GPRS Settings==		==GPRS Settings==
	[[File:GPRS.~~png~~\|right]]		[[File:GPRS 2.PNG\|right]]
	These settings define the main parameters for {{{model\|FMB1YX}}}. <br/ >		These settings define the main parameters for {{{model\|FMB1YX}}}. <br/ >
	GPRS Context:		GPRS Context:

Airidas.S at 12:07, 28 December 2023

2023-12-28T12:07:15Z

← Older revision		Revision as of 15:07, 28 December 2023
Line 22:		Line 22:
	9. 10 minutes.<br>		9. 10 minutes.<br>

	Once 10 minutes is reached and if errors continue to occur the delay will not reset. When connection is succesful the delay resets. This feature is enabled for every socket and SIM1 or SIM2(if available) GPRS context.		Once 10 minutes is reached and if errors continue to occur the delay will not reset. When connection is succesful the delay resets. This feature is enabled for every socket and SIM1 or SIM2 (if available) GPRS context.

	*When disabled device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.		*When disabled device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.

Airidas.S at 12:05, 28 December 2023

2023-12-28T12:05:03Z

@@ Line 10: / Line 10: @@
 APN Password:
 *Access point name password (optional – depending on operator). <br>
 GPRS Authentication:
 * Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />
 {{{txt_sim2|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}
 <br>

AndrejKondratjev: More clear ACK Type description

2023-03-31T13:12:40Z

More clear ACK Type description

← Older revision		Revision as of 16:12, 31 March 2023
Line 87:		Line 87:
	* Can be set either Newest or Oldest. For example if the Oldest is marked the device first will send the Oldest information, if Newest then Device will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. Device continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features are configured device will send the generated records with High Priority first.		* Can be set either Newest or Oldest. For example if the Oldest is marked the device first will send the Oldest information, if Newest then Device will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. Device continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features are configured device will send the generated records with High Priority first.
	ACK Type:		ACK Type:
	*Determines what method the device uses to receive confirmation from the server <span style="color:#F6A83E">TCP/IP</span> or <span style="color:#F6A83E">AVL</span>. <span style="color:#F6A83E">TCP/IP</span> means that the confirmation will be included in the TCP/IP layer and no additional message will be needed. <span style="color:#F6A83E">AVL</span> means that the device will expect an additional AVL message from the server - according to the Data sending protocols described [[Codec\|here]].		*Determines what method the device uses to receive confirmation from the server <span style="color:#F6A83E">TCP/IP</span> or <span style="color:#F6A83E">AVL</span>. <span style="color:#F6A83E">TCP/IP</span> means that the confirmation will be included in the TCP/IP layer and no additional message will be needed to acknowledge the record receiving. <span style="color:#F6A83E">AVL</span> means that the device will expect an additional AVL message from the server - according to the Data sending protocols described [[Codec\|here]].

Martynas.juozaitis: /* First Server Settings */

2022-04-19T12:03:50Z

First Server Settings

← Older revision		Revision as of 15:03, 19 April 2022
Line 41:		Line 41:
	*Server Port		*Server Port
	Protocol:		Protocol:
	*Defines GPRS data transport protocol, used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. From the device side TCP and UDP work almost the same, only difference is that ~~UPD~~ doesn't need additional confirmation from server side, that the data packet was received. TCP has that, and uses more network data for the confirmation. ~~Protocol to use~~ can be ~~select~~ through ~~CFG~~.		*Defines GPRS data transport protocol, used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. From the device side TCP and UDP work almost the same, only difference is that UDP doesn't need additional confirmation from the server side, that the data packet was received. TCP has that, and uses more network data for the confirmation. The desired data transfer protocol can be selected through the configurator.
	TLS encryption:		TLS encryption:
	*An additional option is the use of TLS encryption for sending records to the main server and backup server.		*An additional option is the use of TLS encryption for sending records to the main server and backup server.

Martynas.juozaitis: /* GPRS Settings */

2022-04-19T12:02:30Z

GPRS Settings

← Older revision		Revision as of 15:02, 19 April 2022
Line 5:		Line 5:
	* Device ability to enable or disable GPRS connection.		* Device ability to enable or disable GPRS connection.
	APN:		APN:
	*Access point name, mandatory parameter which is used connect to internet (GPRS). Access Point Name is a gateway between mobile operator and public internet. It can be obtained from your SIM card provider.		*Access point name, a mandatory parameter which is used to connect to the internet (GPRS). Access Point Name is the name of a gateway between a mobile operator and the public internet. It can be obtained from your SIM card provider.
	APN Username:		APN Username:
	*Access point name username (optional – depending on operator)		*Access point name username (optional – depending on operator)
Line 25:		Line 25:
	*This feature can be disabled in the device configuration if the device GPRS settings are configured before installation or during installation of device.		*This feature can be disabled in the device configuration if the device GPRS settings are configured before installation or during installation of device.
	}}}		}}}

	==Transfer APN File==		==Transfer APN File==
	[[File:Transfer APN File .png\|right]]		[[File:Transfer APN File .png\|right]]

Martynas.juozaitis: /* Records Settings */

2022-04-19T11:48:11Z

Records Settings

← Older revision		Revision as of 14:48, 19 April 2022
Line 84:		Line 84:
	*Enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. This functionality works only for Record and Backup Servers. '''Network Ping Timeout should be always lower than Open Link Timeout.'''		*Enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. This functionality works only for Record and Backup Servers. '''Network Ping Timeout should be always lower than Open Link Timeout.'''
	Sort by:		Sort by:
	* Can be set either Newest or Oldest. For example if the Oldest is marked ~~the~~ the device first will send the Oldest information, if Newest then Device will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. Device continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features are configured device will send the generated records with High Priority first.		* Can be set either Newest or Oldest. For example if the Oldest is marked the device first will send the Oldest information, if Newest then Device will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. Device continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features are configured device will send the generated records with High Priority first.
	ACK Type:		ACK Type:
	*Determines what method the device uses to receive confirmation from the server <span style="color:#F6A83E">TCP/IP</span> or <span style="color:#F6A83E">AVL</span>. <span style="color:#F6A83E">TCP/IP</span> means that the confirmation will be included in the TCP/IP layer and no additional message will be needed. <span style="color:#F6A83E">AVL</span> means that the device will expect an additional AVL message from the server - according to the Data sending protocols described [[Codec\|here]].		*Determines what method the device uses to receive confirmation from the server <span style="color:#F6A83E">TCP/IP</span> or <span style="color:#F6A83E">AVL</span>. <span style="color:#F6A83E">TCP/IP</span> means that the confirmation will be included in the TCP/IP layer and no additional message will be needed. <span style="color:#F6A83E">AVL</span> means that the device will expect an additional AVL message from the server - according to the Data sending protocols described [[Codec\|here]].

Arnas.Zeb at 08:33, 17 November 2021

2021-11-17T08:33:30Z

← Older revision		Revision as of 11:33, 17 November 2021
Line 84:		Line 84:
	*Enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. This functionality works only for Record and Backup Servers. '''Network Ping Timeout should be always lower than Open Link Timeout.'''		*Enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. This functionality works only for Record and Backup Servers. '''Network Ping Timeout should be always lower than Open Link Timeout.'''
	Sort by:		Sort by:
	* Can be set either Newest or Oldest. For example if the Oldest is marked the the device first will send the Oldest information, if Newest then Device will send the newest information. ~~Also if there was~~ no connection ~~for some time, the device saves the~~ records ~~to the~~ internal ~~storage~~, ~~when signal is~~ recovered ~~and if the sorting is set on Newest the~~ device will ~~sent first the Newest record rather than the Older records~~. If Oldest is ~~set then~~ the ~~device will sent~~ all the records ~~from Oldest~~ to Newest~~, but it may take some time while the Newest record will~~ be sent. If high priority in I/O ~~section is set then I/O parameter~~ will ~~be sent~~ first.		* Can be set either Newest or Oldest. For example if the Oldest is marked the the device first will send the Oldest information, if Newest then Device will send the newest information. If the device had no connection (GSM or GPRS) due to bad coverage or being in an area with no signal. Device continues to save records into internal memory, once GSM and GPRS are recovered device will start sending saved data to server. In this example, if Oldest is configured - until newest data is seen on the server all of the oldest records have to be sent first. If Newest is configured - previous data and track won't be seen until newest data is sent first. If high priority on I/O parameters or Features are configured device will send the generated records with High Priority first.
	ACK Type:		ACK Type:
	*Determines what method the device uses to receive confirmation from the server <span style="color:#F6A83E">TCP/IP</span> or <span style="color:#F6A83E">AVL</span>. <span style="color:#F6A83E">TCP/IP</span> means that the confirmation will be included in the TCP/IP layer and no additional message will be needed. <span style="color:#F6A83E">AVL</span> means that the device will expect an additional AVL message from the server,		*Determines what method the device uses to receive confirmation from the server <span style="color:#F6A83E">TCP/IP</span> or <span style="color:#F6A83E">AVL</span>. <span style="color:#F6A83E">TCP/IP</span> means that the confirmation will be included in the TCP/IP layer and no additional message will be needed. <span style="color:#F6A83E">AVL</span> means that the device will expect an additional AVL message from the server - according to the Data sending protocols described [[Codec\|here]].