Template:FMB GSM Operators settings - Revision history

Mazvydas.bernotas at 12:07, 11 December 2023

2023-12-11T12:07:58Z

← Older revision		Revision as of 15:07, 11 December 2023
Line 6:		Line 6:

	[[Image:FMB120 GSM opers gif.gif]]		[[Image:FMB120 GSM opers gif.gif]]

			'''Configuring device roaming and blacklist operators is recommended to optimize device performance by mitigating additional latency.'''

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If the home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered into this list.<br/><br/>The Operator search procedure is initiated every 15 minutes. During the search, {{{model\|FMB1YX}}} tries to connect to the operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when the device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If the home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered into this list.<br/><br/>The Operator search procedure is initiated every 15 minutes. During the search, {{{model\|FMB1YX}}} tries to connect to the operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when the device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

Sandra.Gasyte at 10:02, 10 July 2022

2022-07-10T10:02:59Z

← Older revision		Revision as of 13:02, 10 July 2022
Line 3:		Line 3:
	===Operator lists===		===Operator lists===

	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on the GSM operator {{{model\|FMB1YX}}} is connected to.

	[[Image:FMB120 GSM opers gif.gif]]		[[Image:FMB120 GSM opers gif.gif]]

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>The Operator search procedure is initiated every 15 minutes. During the search, ~~FMB130~~ tries to connect to the operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If the home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered into this list.<br/><br/>The Operator search procedure is initiated every 15 minutes. During the search, {{{model\|FMB1YX}}} tries to connect to the operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when the device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

Martynas.juozaitis: /* Operator lists */

2022-04-20T04:37:26Z

Operator lists

← Older revision		Revision as of 07:37, 20 April 2022
Line 7:		Line 7:
	[[Image:FMB120 GSM opers gif.gif]]		[[Image:FMB120 GSM opers gif.gif]]

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator ~~the~~ search procedure is initiated ~~as normal~~ every 15 minutes ~~and~~ tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>The Operator search procedure is initiated every 15 minutes. During the search, FMB130 tries to connect to the operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

Tomas.kriauciunas: Protected "Template:FMB GSM Operators settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2021-03-04T13:44:20Z

Protected "Template:FMB GSM Operators settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision	Revision as of 16:44, 4 March 2021
(No difference)

Tomas.kriauciunas at 13:43, 4 March 2021

2021-03-04T13:43:47Z

← Older revision		Revision as of 16:43, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	[Image:FMB120 GSM opers gif.gif]		[[Image:FMB120 GSM opers gif.gif]]

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

Raul.andrade at 13:43, 4 March 2021

2021-03-04T13:43:19Z

← Older revision		Revision as of 16:43, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	~~{{{pic_operators\|[~~[Image:FMB120 GSM opers gif.gif~~\|800px\|none]~~]~~}}}~~		[Image:FMB120 GSM opers gif.gif]

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

212.59.13.226 at 13:35, 4 March 2021

2021-03-04T13:35:56Z

← Older revision		Revision as of 16:35, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	{{{pic_operators\|[[Image:FMB120 GSM ~~operators~~ gif.gif\|800px\|none]]}}}		{{{pic_operators\|[[Image:FMB120 GSM opers gif.gif\|800px\|none]]}}}

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

212.59.13.226 at 13:34, 4 March 2021

2021-03-04T13:34:49Z

← Older revision		Revision as of 16:34, 4 March 2021
Line 3:		Line 3:
	===Operator lists===		===Operator lists===

	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected ~~t o~~.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	{{{pic_operators\|[[Image:FMB120 GSM operators gif.gif\|800px\|none]]}}}		{{{pic_operators\|[[Image:FMB120 GSM operators gif.gif\|800px\|none]]}}}

212.59.13.226 at 13:34, 4 March 2021

2021-03-04T13:34:27Z

← Older revision		Revision as of 16:34, 4 March 2021
Line 3:		Line 3:
	===Operator lists===		===Operator lists===

	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected t o.

	{{{pic_operators\|[[Image:FMB120 GSM operators gif.gif\|800px\|none]]}}}		{{{pic_operators\|[[Image:FMB120 GSM operators gif.gif\|800px\|none]]}}}

Raul.andrade at 13:33, 4 March 2021

2021-03-04T13:33:11Z

← Older revision		Revision as of 16:33, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	{{{pic_operators\|[[Image:FMB120 GSM operators.~~png~~\|800px\|none]]}}}		{{{pic_operators\|[[Image:FMB120 GSM operators gif.gif\|800px\|none]]}}}

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

← Older revision		Revision as of 16:43, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	~~{{{pic_operators\|[~~[Image:FMB120 GSM opers gif.gif~~\|800px\|none]~~]~~}}}~~		[Image:FMB120 GSM opers gif.gif]

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

← Older revision		Revision as of 16:35, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	{{{pic_operators\|[[Image:FMB120 GSM ~~operators~~ gif.gif\|800px\|none]]}}}		{{{pic_operators\|[[Image:FMB120 GSM opers gif.gif\|800px\|none]]}}}

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}

← Older revision		Revision as of 16:33, 4 March 2021
Line 5:		Line 5:
	{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.		{{{model\|FMB1YX}}} can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see {{{ctrDaq\|[[Template:FMB Data acquisition settings]]}}} section for more details). Modes are changed based on GSM operator {{{model\|FMB1YX}}} is connected to.

	{{{pic_operators\|[[Image:FMB120 GSM operators.~~png~~\|800px\|none]]}}}		{{{pic_operators\|[[Image:FMB120 GSM operators gif.gif\|800px\|none]]}}}

	If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.		If the roaming operator list is left empty, {{{model\|FMB1YX}}} will automatically detect the home operator. If home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and {{{model\|FMB1YX}}} will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).<br/>If the user wants {{{model\|FMB1YX}}} to not connect and work with a particular operator it has to be written to ''Operator Blacklist''. Up to 50 operators may be entered to this list.<br/><br/>Operator the search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.

	{{{dual_sim\|}}}		{{{dual_sim\|}}}