https://wiki.teltonika-gps.com/index.php?action=history&feed=atom&title=Template%3AFMB_Manual_Geofence_settings 2026-04-09T03:43:55Z Revision history for this page on the wiki MediaWiki 1.43.5 https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=56978&oldid=prev 2020-04-10T11:32:32Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 14:32, 10 April 2020</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4">Line 4:</td> <td colspan="2" class="diff-lineno">Line 4:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) whereas &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) whereas &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>{{{geofence_settings|[[Image:Manual Geofence.gif<del style="font-weight: bold; text-decoration: none;">|800px</del>|none]]}}}</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>{{{geofence_settings|[[Image:Manual Geofence.gif|none]]}}}</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-56977:rev-56978:php=table --> </table>

Fomcenko.vi https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=56977&oldid=prev 2020-04-10T11:28:31Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 14:28, 10 April 2020</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4">Line 4:</td> <td colspan="2" class="diff-lineno">Line 4:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) whereas &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) whereas &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>{{{geofence_settings|[[Image:<del style="font-weight: bold; text-decoration: none;">Fmb120_geofence_config</del>.<del style="font-weight: bold; text-decoration: none;">png</del>|800px|none]]}}}</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>{{{geofence_settings|[[Image:<ins style="font-weight: bold; text-decoration: none;">Manual Geofence</ins>.<ins style="font-weight: bold; text-decoration: none;">gif</ins>|800px|none]]}}}</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-25821:rev-56977:php=table --> </table>

Fomcenko.vi https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=25821&oldid=prev 2018-12-21T06:53:18Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 09:53, 21 December 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4">Line 4:</td> <td colspan="2" class="diff-lineno">Line 4:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) whereas &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) whereas &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|none]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">{{{geofence_settings|</ins>[[Image:Fmb120_geofence_config.png|800px|none]]<ins style="font-weight: bold; text-decoration: none;">}}}</ins></div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-16971:rev-25821:php=table --> </table>

Ignas.adomaitis https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=16971&oldid=prev 2018-07-27T10:25:49Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 13:25, 27 July 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different ''Geozone''. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) <del style="font-weight: bold; text-decoration: none;">while </del>''Y1'' is used to set Y coordinate (latitude).&lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area whereas red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different ''Geozone''. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) <ins style="font-weight: bold; text-decoration: none;">whereas </ins>''Y1'' is used to set Y coordinate (latitude).&lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|none]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|none]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-16970:rev-16971:php=table --> </table>

Atabasnikov https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=16970&oldid=prev 2018-07-27T10:25:27Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 13:25, 27 July 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area <del style="font-weight: bold; text-decoration: none;">while </del>red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different ''Geozone''. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude).&lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area <ins style="font-weight: bold; text-decoration: none;">whereas </ins>red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different ''Geozone''. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude).&lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|none]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|none]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-14054:rev-16970:php=table --> </table>

Atabasnikov https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=14054&oldid=prev 2018-05-31T08:00:04Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 11:00, 31 May 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4">Line 4:</td> <td colspan="2" class="diff-lineno">Line 4:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) while &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the defined area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by the user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to the server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different &#039;&#039;Geozone&#039;&#039;. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) while &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude).&lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|<del style="font-weight: bold; text-decoration: none;">center</del>]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|<ins style="font-weight: bold; text-decoration: none;">none</ins>]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-9183:rev-14054:php=table --> </table>

Atabasnikov https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=9183&oldid=prev 2018-04-27T12:33:31Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:33, 27 April 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record<del style="font-weight: bold; text-decoration: none;">, </del>and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different <del style="font-weight: bold; text-decoration: none;">geozone</del>. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude). &lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the <ins style="font-weight: bold; text-decoration: none;">defined </ins>area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by <ins style="font-weight: bold; text-decoration: none;">the </ins>user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to <ins style="font-weight: bold; text-decoration: none;">the </ins>server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings]]}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different <ins style="font-weight: bold; text-decoration: none;">''Geozone''</ins>. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude).&lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-8833:rev-9183:php=table --> </table>

Atabasnikov https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=8833&oldid=prev 2018-04-26T12:50:45Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:50, 26 April 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record, and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different geozone. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude). &lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in {{{ctrIO|[[Template:FMB I/O settings<ins style="font-weight: bold; text-decoration: none;">]]</ins>}}}.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record, and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different geozone. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude). &lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-8832:rev-8833:php=table --> </table>

Atabasnikov https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=8832&oldid=prev 2018-04-26T12:50:32Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:50, 26 April 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2">Line 2:</td> <td colspan="2" class="diff-lineno">Line 2:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{{model|FMB1YX}}} has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in [[<del style="font-weight: bold; text-decoration: none;">FMB120 I/O settings|</del>I/O settings <del style="font-weight: bold; text-decoration: none;">section]]</del>.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record, and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different geozone. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude). &lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>''Frame border'' is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;''Shape'' can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in <ins style="font-weight: bold; text-decoration: none;">{{{ctrIO|</ins>[[<ins style="font-weight: bold; text-decoration: none;">Template:FMB </ins>I/O settings<ins style="font-weight: bold; text-decoration: none;">}}}</ins>.&lt;br/&gt;''Generate event'' allows to choose when record will be generated.&lt;br/&gt;''Eventual records'' controls where scenario status value appears: when disabled it will exist in each AVL record, and when enabled the value will be appended only to eventual records.&lt;br/&gt;''OverSpeeding'' helps to configure OverSpeeding scenarios separately for each different geozone. Regular OverSpeeding and geozones' OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;''X1'' is used to set geofence zone left bottom corner X coordinate (longitude) while ''Y1'' is used to set Y coordinate (latitude). &lt;br/&gt;''X2'' or ''R'' are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. ''Y2'' sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-8650:rev-8832:php=table --> </table>

Atabasnikov https://wiki.teltonika-gps.com/index.php?title=Template:FMB_Manual_Geofence_settings&diff=8650&oldid=prev 2018-04-26T08:22:55Z

<p></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 11:22, 26 April 2018</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1">Line 1:</td> <td colspan="2" class="diff-lineno">Line 1:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_border.png|400px|right]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_border.png|400px|right]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">FMB120 </del>has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">{{{model|FMB1YX}}} </ins>has 50 configurable Geofence zones and it can generate an event when a defined Geofence zone border is crossed.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in [[FMB120 I/O settings|I/O settings section]].&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record, and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different geozone. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) while &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude). &lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;Frame border&#039;&#039; is an additional border around Geofence zone used to prevent false events when object stops on the border of the area and as a result records are made inside and outside the area because of GNSS errors. The event is generated only when both (Geofence and frame) borders are crossed. See figure to the right for details: blue track is considered to have entered the area while red track is not.&lt;br/&gt;&#039;&#039;Shape&#039;&#039; can be a rectangle or a circle as defined by user.&lt;br/&gt;Priority of Geofence event is categorized into Low, High or Panic levels. These levels define the priority of event information that is sent to server. For more details about priorities look in [[FMB120 I/O settings|I/O settings section]].&lt;br/&gt;&#039;&#039;Generate event&#039;&#039; allows to choose when record will be generated.&lt;br/&gt;&#039;&#039;Eventual records&#039;&#039; controls where scenario status value appears: when disabled it will exist in each AVL record, and when enabled the value will be appended only to eventual records.&lt;br/&gt;&#039;&#039;OverSpeeding&#039;&#039; helps to configure OverSpeeding scenarios separately for each different geozone. Regular OverSpeeding and geozones&#039; OverSpeeding function independently. If digital output control is enabled in a regular OverSpeeding scenario, geozones OverSpeeding scenario will control it too i.e when the device is in more than one geozone and OverSpeeding is detected in any zone then the digital output turns on. Digital output turns off only when OverSpeeding is not detected anywhere.&lt;br/&gt;&lt;br/&gt;&#039;&#039;X1&#039;&#039; is used to set geofence zone left bottom corner X coordinate (longitude) while &#039;&#039;Y1&#039;&#039; is used to set Y coordinate (latitude). &lt;br/&gt;&#039;&#039;X2&#039;&#039; or &#039;&#039;R&#039;&#039; are used to set accordingly geofence zone upper right corner X coordinate (longitude) when Rectangular zone is used or circle radius when Circular zone is used. &#039;&#039;Y2&#039;&#039; sets geofence zone upper right corner Y coordinate (latitude) for a Rectangular zone.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:Fmb120_geofence_config.png|800px|center]]</div></td></tr> <!-- diff cache key wiki_gps_v2:diff:1.41:old-8426:rev-8650:php=table --> </table>

Atabasnikov