Template:FMB SMS events - Revision history

Airidas.S at 08:24, 3 October 2023

2023-10-03T08:24:42Z

← Older revision		Revision as of 11:24, 3 October 2023
Line 24:		Line 24:
	\|}		\|}

	==SMS ~~Functionality~~ in older versions==		==SMS Events in older versions==

	SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.		SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.

	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

Airidas.S at 08:24, 3 October 2023

2023-10-03T08:24:24Z

← Older revision		Revision as of 11:24, 3 October 2023
Line 24:		Line 24:
	\|}		\|}

	==SMS Functionality ~~In firmware~~ versions ~~below <b>03.29.00.Rev.00</b>~~==		==SMS Functionality in older versions==

	SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.		SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.

Airidas.S at 08:23, 3 October 2023

2023-10-03T08:23:23Z

← Older revision		Revision as of 11:23, 3 October 2023
Line 1:		Line 1:
	==SMS Events==		==SMS Events==

	From firmware version <b>03.29.00.Rev.00</b> improvement in configuring SMS events ~~will be~~ made. SMS event configuration will be available in a single tab, which would allow more flexible {{{model\|FMB}}} configuration, and improved visibility and readability of configured parameters. Additionally, now it is possible to send a SMS notification to multiple phone numbers simultaneously.<br>		From firmware version <b>03.29.00.Rev.00</b> improvement in configuring SMS events is made. SMS event configuration will be available in a single tab, which would allow more flexible {{{model\|FMB}}} configuration, and improved visibility and readability of configured parameters. Additionally, now it is possible to send a SMS notification to multiple phone numbers simultaneously.<br>

	[[Image:SMSEventBefore.gif\|left]]		[[Image:SMSEventBefore.gif\|left]]
Line 24:		Line 24:
	\|}		\|}

	In firmware versions below <b>03.29.00.Rev.00</b> SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.		==SMS Functionality In firmware versions below <b>03.29.00.Rev.00</b>==

			SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.

	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

Airidas.S at 08:21, 3 October 2023

2023-10-03T08:21:18Z

← Older revision		Revision as of 11:21, 3 October 2023
Line 1:		Line 1:
	SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.		==SMS Events==

	[[Image:{{{~~SMS_Call_1~~\|~~Fmb120_predef_numlist~~.~~png~~}}}\|800px\|~~none~~]]		From firmware version <b>03.29.00.Rev.00</b> improvement in configuring SMS events will be made. SMS event configuration will be available in a single tab, which would allow more flexible {{{model\|FMB}}} configuration, and improved visibility and readability of configured parameters. Additionally, now it is possible to send a SMS notification to multiple phone numbers simultaneously.<br>

			[[Image:SMSEventBefore.gif\|left]]

			<b>Note:</b> These changes effect SMS events configuration for I/O elements and Manual Geofence only. SMS events configuration logic is not changed for Features and Acc.Features.

			SMS events functionality allows {{{model\|FMB}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements are triggered, {{{model\|FMB}}} sends a configured SMS message to a defined phone number.

			[[Image:FMB640 predef numlxist.png\|800px\|centre]]

	~~The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if~~ {{{model\|~~FMB1YX~~}}} is ~~configured~~ to send an SMS~~, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation is set~~ to ~~both range entrance and exit~~ (~~as shown~~ in the ~~figure below), then the following~~ SMS is ~~sent~~:~~<br/>''"2017~~/06/~~13 13:52:18 Lon:25~~.~~255537 Lat:54~~.~~667193~~ {{{~~txt_switch~~\|~~Ignition~~}}} 1"''		{{{model\|FMB}}} is able to send SMS messages to Predefined phone numbers (recipients) if any of the selected events are triggered. Users can send SMS alert messages of selected events to a maximum of 10 predefined phone numbers. AVL ID of the parameter has to be entered in the configuration to receive its SMS event. AVL ID list is defined and available each device wiki page under [https://wiki.teltonika-gps.com/view/{{{model\|FMB}}}_Teltonika_Data_Sending_Parameters_ID "Teltonika Data Sending Parameters ID"] tab.

	~~{{{pic_IO\|[[Image:FMB120~~ SMS ~~events~~.~~png\|800px\|none]]}}}~~		<br>Predefined phone numbers must be entered in the SMS Events Numbers list in the ‘SMS \ Call Settings’ menu before it will be possible to pair them with AVL ID and SMS event text.
	~~The~~ SMS Text ~~field can be altered and any~~ text ~~can be entered. Maximum~~ message ~~length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",")~~.
			SMS Event Text is used to add additional text to standard SMS event message text.

	{\| class="wikitable" style="border-style: solid; border-width: 0px"		{\| class="wikitable" style="border-style: solid; border-width: 0px"
Line 14:		Line 23:
	\| style="text-align: left; background: #F6F6FB;" \| If {{{model\|FMB1YX}}} is in ''Deep Sleep'' mode and an SMS event occurs with ''Low priority'' (which does not wake up {{{model\|FMB1YX}}}), then the device does not send the message. It is saved to device memory until it wakes up from ''Deep Sleep'' mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.		\| style="text-align: left; background: #F6F6FB;" \| If {{{model\|FMB1YX}}} is in ''Deep Sleep'' mode and an SMS event occurs with ''Low priority'' (which does not wake up {{{model\|FMB1YX}}}), then the device does not send the message. It is saved to device memory until it wakes up from ''Deep Sleep'' mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.
	\|}		\|}

			In firmware versions below <b>03.29.00.Rev.00</b> SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.

			[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

			The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation is set to both range entrance and exit (as shown in the figure below), then the following SMS is sent:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

			{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}
			The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

Martynas.juozaitis at 12:09, 19 April 2022

2022-04-19T12:09:33Z

← Older revision		Revision as of 15:09, 19 April 2022
Line 3:		Line 3:
	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the ~~sent~~ SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation is set to both range entrance and exit (as shown in the figure below), then the following SMS is sent:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}

Gabrielius.jankauskas at 13:49, 30 April 2020

2020-04-30T13:49:05Z

← Older revision		Revision as of 16:49, 30 April 2020
Line 5:		Line 5:
	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:~~Fmb120_sms_event~~.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}
	The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").		The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

Atabasnikov at 12:14, 24 July 2018

2018-07-24T12:14:03Z

← Older revision		Revision as of 15:14, 24 July 2018
Line 3:		Line 3:
	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and ~~Event~~ generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}

Atabasnikov: Reverted edits by Karolis.dumbrava (talk) to last revision by Atabasnikov

2018-07-24T12:09:54Z

Reverted edits by Karolis.dumbrava (talk) to last revision by Atabasnikov

← Older revision		Revision as of 15:09, 24 July 2018
Line 5:		Line 5:
	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:~~FMB964 IO~~.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}
	The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").		The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

Karolis.dumbrava at 05:37, 20 July 2018

2018-07-20T05:37:09Z

← Older revision		Revision as of 08:37, 20 July 2018
Line 5:		Line 5:
	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:~~Fmb120_sms_event~~.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:FMB964 IO.png\|800px\|none]]}}}
	The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").		The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

Atabasnikov at 07:27, 16 July 2018

2018-07-16T07:27:15Z

← Older revision		Revision as of 10:27, 16 July 2018
Line 3:		Line 3:
	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, if {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}

← Older revision		Revision as of 11:21, 3 October 2023
Line 1:		Line 1:
	SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.		==SMS Events==

	[[Image:{{{~~SMS_Call_1~~\|~~Fmb120_predef_numlist~~.~~png~~}}}\|800px\|~~none~~]]		From firmware version <b>03.29.00.Rev.00</b> improvement in configuring SMS events will be made. SMS event configuration will be available in a single tab, which would allow more flexible {{{model\|FMB}}} configuration, and improved visibility and readability of configured parameters. Additionally, now it is possible to send a SMS notification to multiple phone numbers simultaneously.<br>

			[[Image:SMSEventBefore.gif\|left]]

			<b>Note:</b> These changes effect SMS events configuration for I/O elements and Manual Geofence only. SMS events configuration logic is not changed for Features and Acc.Features.

			SMS events functionality allows {{{model\|FMB}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements are triggered, {{{model\|FMB}}} sends a configured SMS message to a defined phone number.

			[[Image:FMB640 predef numlxist.png\|800px\|centre]]

	~~The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if~~ {{{model\|~~FMB1YX~~}}} is ~~configured~~ to send an SMS~~, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation is set~~ to ~~both range entrance and exit~~ (~~as shown~~ in the ~~figure below), then the following~~ SMS is ~~sent~~:~~<br/>''"2017~~/06/~~13 13:52:18 Lon:25~~.~~255537 Lat:54~~.~~667193~~ {{{~~txt_switch~~\|~~Ignition~~}}} 1"''		{{{model\|FMB}}} is able to send SMS messages to Predefined phone numbers (recipients) if any of the selected events are triggered. Users can send SMS alert messages of selected events to a maximum of 10 predefined phone numbers. AVL ID of the parameter has to be entered in the configuration to receive its SMS event. AVL ID list is defined and available each device wiki page under [https://wiki.teltonika-gps.com/view/{{{model\|FMB}}}_Teltonika_Data_Sending_Parameters_ID "Teltonika Data Sending Parameters ID"] tab.

	~~{{{pic_IO\|[[Image:FMB120~~ SMS ~~events~~.~~png\|800px\|none]]}}}~~		<br>Predefined phone numbers must be entered in the SMS Events Numbers list in the ‘SMS \ Call Settings’ menu before it will be possible to pair them with AVL ID and SMS event text.
	~~The~~ SMS Text ~~field can be altered and any~~ text ~~can be entered. Maximum~~ message ~~length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",")~~.
			SMS Event Text is used to add additional text to standard SMS event message text.

	{\| class="wikitable" style="border-style: solid; border-width: 0px"		{\| class="wikitable" style="border-style: solid; border-width: 0px"
Line 14:		Line 23:
	\| style="text-align: left; background: #F6F6FB;" \| If {{{model\|FMB1YX}}} is in ''Deep Sleep'' mode and an SMS event occurs with ''Low priority'' (which does not wake up {{{model\|FMB1YX}}}), then the device does not send the message. It is saved to device memory until it wakes up from ''Deep Sleep'' mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.		\| style="text-align: left; background: #F6F6FB;" \| If {{{model\|FMB1YX}}} is in ''Deep Sleep'' mode and an SMS event occurs with ''Low priority'' (which does not wake up {{{model\|FMB1YX}}}), then the device does not send the message. It is saved to device memory until it wakes up from ''Deep Sleep'' mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.
	\|}		\|}

			In firmware versions below <b>03.29.00.Rev.00</b> SMS events functionality allows {{{model\|FMB1YX}}} to send a configured SMS when an event is triggered. This event can be triggered by every I/O element.<br/>When any of the I/O elements is triggered, {{{model\|FMB1YX}}} sends a configured SMS message to a defined phone number. If SMS events are activated but there are no numbers defined in ''GSM Predefined Numbers'' list (similarly as in the picture below), then the device will not send any messages.

			[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

			The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation is set to both range entrance and exit (as shown in the figure below), then the following SMS is sent:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

			{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}
			The SMS Text field can be altered and any text can be entered. Maximum message length is 160 symbols (numbers, letters and symbols in ASCII, except for comma symbol ",").

← Older revision		Revision as of 15:09, 19 April 2022
Line 3:		Line 3:
	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the ~~sent~~ SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation is set to both range entrance and exit (as shown in the figure below), then the following SMS is sent:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:FMB120 SMS events.png\|800px\|none]]}}}

← Older revision		Revision as of 15:14, 24 July 2018
Line 3:		Line 3:
	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and ~~Event~~ generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}

← Older revision		Revision as of 10:27, 16 July 2018
Line 3:		Line 3:
	[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]		[[Image:{{{SMS_Call_1\|Fmb120_predef_numlist.png}}}\|800px\|none]]

	The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, if {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''		The sent SMS messages format is following:<br/>''"Date Time Current Coordinate Event Text"''<br/>For example, if {{{model\|FMB1YX}}} is configured to send an SMS, when {{{txt_switch\|Ignition}}} reaches high level while configured with ''High priority'' and Event generation on both range entrance and exit (as shown on the figure below), then the sent SMS is:<br/>''"2017/06/13 13:52:18 Lon:25.255537 Lat:54.667193 {{{txt_switch\|Ignition}}} 1"''

	{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}		{{{pic_IO\|[[Image:Fmb120_sms_event.png\|800px\|none]]}}}