Template:FMB Sleep modes - Revision history

SimonasM: Added CAN and OBD behaviour for Deep Sleep and Online Deep Sleep under the condition that the page has variable CAN set.

2024-08-08T10:22:24Z

Added CAN and OBD behaviour for Deep Sleep and Online Deep Sleep under the condition that the page has variable CAN set.

← Older revision		Revision as of 13:22, 8 August 2024
Line 42:		Line 42:
	[[Image:Deep_Sleep_.gif]]		[[Image:Deep_Sleep_.gif]]

	Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model\|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO\|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.		Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model\|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO\|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.

			{{#if: {{{CAN\|}}} \| In this mode, OBD, CAN and Eventual I/O activity is disabled. Records that are generated while the device is sleeping will not contain data from these sources, Parameter AVL IDs will also be excluded from the records. \| }}
	{{{model\|FMM6YX}}} can enter deep sleep mode if ALL of these conditions are met:		{{{model\|FMM6YX}}} can enter deep sleep mode if ALL of these conditions are met:

Line 78:		Line 80:

	In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.		In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.
			{{#if: {{{CAN\|}}} \| In this mode, OBD, CAN and Eventual I/O activity is disabled. Records that are generated while the device is sleeping will not contain data from these sources, Parameter AVL IDs will also be excluded from the records. \| }}

	[[Image:Online_Deep_Sleep_.gif]]		[[Image:Online_Deep_Sleep_.gif]]

Tomas.kriauciunas at 20:51, 23 January 2023

2023-01-23T20:51:04Z

← Older revision		Revision as of 23:51, 23 January 2023
Line 92:		Line 92:

	[[Image:Ultra_Sleep.gif]]		[[Image:Ultra_Sleep.gif]]

	~~{{{pwu\|==BT/BLE module OFF/PWU during Sleep modes==~~
	~~Power off sleep mode can be described as the lowest possible power consumption mode where the device can go into power off state and can only wake up if one of the conditions is true:~~

	*Movement is detected by accelerometer (not by the configured movement source;
	*External power is applied;
	*It is the time to make a new periodic record (new feature);

	*NOTE: Please keep a note that Power OFF Sleep will not work if any USB cable is connected to the device;

Tomas.kriauciunas at 20:50, 23 January 2023

2023-01-23T20:50:07Z

← Older revision		Revision as of 23:50, 23 January 2023
Line 92:		Line 92:

	[[Image:Ultra_Sleep.gif]]		[[Image:Ultra_Sleep.gif]]

			{{{pwu\|==BT/BLE module OFF/PWU during Sleep modes==
			Power off sleep mode can be described as the lowest possible power consumption mode where the device can go into power off state and can only wake up if one of the conditions is true:

			*Movement is detected by accelerometer (not by the configured movement source;
			*External power is applied;
			*It is the time to make a new periodic record (new feature);

			*NOTE: Please keep a note that Power OFF Sleep will not work if any USB cable is connected to the device;

Janusz: /* GPS Sleep mode */

2022-10-06T06:15:31Z

GPS Sleep mode

← Older revision		Revision as of 09:15, 6 October 2022
Line 19:		Line 19:
	:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.		:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| and configured movement source}}};
	{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}		{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}

Aleksandr.boldyrev: /* Deep Sleep mode */

2021-11-17T13:14:36Z

Deep Sleep mode

← Older revision		Revision as of 16:14, 17 November 2021
Line 52:		Line 52:
	:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.		:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.

	{{{txt_ignition\| Ignition (configured ignition source) is off;~~}}}~~		*Ignition (configured ignition source) is off;

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};

Sandra.Gasyte: Reverted edits by SandraG (talk) to last revision by Kriauciunas.to

2021-06-11T08:14:32Z

Reverted edits by SandraG (talk) to last revision by Kriauciunas.to

← Older revision		Revision as of 11:14, 11 June 2021
Line 5:		Line 5:
	==GPS Sleep mode==		==GPS Sleep mode==

	[[{{{model\|FMM6YX}}}]] is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.
			{{{model\|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.

	[[Image:GPS_Sleep_.gif]]		[[Image:GPS_Sleep_.gif]]

	When in GPS sleep mode, [[{{{model\|FMM6YX}}}]] turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>[[{{{model\|FMM6YX}}}]] will enter GPS sleep mode if ALL of these conditions are met:		When in GPS sleep mode, {{{model\|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model\|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:

	*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;		*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;
	*Device time ~~synchronization~~ depends on the ~~[[{{{model\|FMM6YX}}}_System_settings#Recors_Saving.2FSending_Without_TS\|'''Records~~ saving/sending without ~~TS''']]~~ parameter:		*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:

	:*~~'''''~~After Position Fix~~'''''~~ - [[{{{model\|FMM6YX}}}]] time is synchronized with GNSS satellites and GPS fix is obtained;		:*After Position Fix - {{{model\|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;
	:*~~'''''~~After Time Sync~~'''''~~ - [[{{{model\|FMM6YX}}}]] time is synchronized over NTP, NITZ, or GNSS satellites;		:*After Time Sync - {{{model\|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;
	:*~~'''''~~Always~~'''''~~ - [[{{{model\|FMM6YX}}}]] will enter sleep mode without time synchronization and GPS fix.		:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};
	{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}		{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}

	*There are no SMS messages being received.		*There are no SMS messages being received.

	{{{usb_disconnected\|}}}		{\| class="wikitable" style="border-style: solid; border-width: 0px"
	[[{{{model\|FMM6YX}}}]] exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:		\|+
			\|-
			\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]
			\| style="text-align: left; background: #F6F6FB;" \|On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.
			\|}
			{{{usb_disconnected\|}}}

			{{{model\|FMM6YX}}} exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:

	*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;		*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;
	{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}		{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}

Sandra.Gasyte: /* GPS Sleep mode */

2021-06-11T08:11:42Z

GPS Sleep mode

← Older revision		Revision as of 11:11, 11 June 2021
Line 5:		Line 5:
	==GPS Sleep mode==		==GPS Sleep mode==

			[[{{{model\|FMM6YX}}}]] is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.
	{{{model\|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.

	[[Image:GPS_Sleep_.gif]]		[[Image:GPS_Sleep_.gif]]

	When in GPS sleep mode, {{{model\|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model\|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:		When in GPS sleep mode, [[{{{model\|FMM6YX}}}]] turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>[[{{{model\|FMM6YX}}}]] will enter GPS sleep mode if ALL of these conditions are met:

	*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;		*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;
	*Device time ~~must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition~~ depends on the ~~“Records~~ saving/sending without ~~TS”~~ parameter:		*Device time synchronization depends on the [[{{{model\|FMM6YX}}}_System_settings#Recors_Saving.2FSending_Without_TS\|'''Records saving/sending without TS''']] parameter:

	:*After Position Fix - {{{model\|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;		:*'''''After Position Fix''''' - [[{{{model\|FMM6YX}}}]] time is synchronized with GNSS satellites and GPS fix is obtained;
	:*After Time Sync - {{{model\|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;		:*'''''After Time Sync''''' - [[{{{model\|FMM6YX}}}]] time is synchronized over NTP, NITZ, or GNSS satellites;
	:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.		:*'''''Always''''' - [[{{{model\|FMM6YX}}}]] will enter sleep mode without time synchronization and GPS fix.

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};
	{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}		{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}

	*There are no SMS messages being received.		*There are no SMS messages being received.

	~~{\| class="wikitable" style="border-style: solid; border-width: 0px"~~		{{{usb_disconnected\|}}}
	\|+		[[{{{model\|FMM6YX}}}]] exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:
	\|-
	~~\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]~~
	\| style="text-align: left; background: #F6F6FB;" \|On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.
	\|}
	{{{usb_disconnected\|}}}

	{{{model\|FMM6YX}}} exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:

	*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;		*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;
	{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}		{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}

Tomas.kriauciunas: Protected "Template:FMB Sleep modes" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2021-03-25T15:09:56Z

Protected "Template:FMB Sleep modes" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision		Revision as of 18:09, 25 March 2021
(No difference)

Raul.dias at 15:04, 25 March 2021

2021-03-25T15:04:48Z

← Older revision		Revision as of 18:04, 25 March 2021
Line 79:		Line 79:
	In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.		In this mode, the device works as in deep sleep mode, but without deregistering from the GSM network. GSM part stays powered so this increases power consumption. In this mode, the device should send/receive SMS and make/accept calls. It does not close the GPRS context if one was previously opened.

	[[Image:~~Online Deep Sleep~~.gif]]		[[Image:Online_Deep_Sleep_.gif]]

	Conditions to enter online deep sleep mode are the same as entering deep sleep mode.		Conditions to enter online deep sleep mode are the same as entering deep sleep mode.

Raul.dias at 14:59, 25 March 2021

2021-03-25T14:59:14Z

← Older revision		Revision as of 17:59, 25 March 2021
Line 40:		Line 40:
	While in deep sleep mode, {{{model\|FMM6YX}}} sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up the device via SMS). Despite records with the last known coordinate being saved and sent to the AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save the vehicle's battery.		While in deep sleep mode, {{{model\|FMM6YX}}} sets the GNSS receiver to sleep mode and turns off GSM/GPRS module (hence it is not possible to wake up the device via SMS). Despite records with the last known coordinate being saved and sent to the AVL server (GSM/GPRS module is turned on to send data and then it is turned off), power usage is decreased to save the vehicle's battery.

	[[Image:~~Deep Sle~~ .gif]]		[[Image:Deep_Sleep_.gif]]

	Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model\|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO\|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.		Please note that power saving depends on two configurable parameters: ''Send Period'' and ''Minimum Record Saving Period'' in "X on Stop Mode". When records are sent successfully in deep sleep mode, open link timeout counter will be skipped and {{{model\|FMM6YX}}} will enter deep sleep mode immediately.<br />Because a lot of functions are disabled in deep sleep mode following I/O elements are disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator{{{txt_IO\|, Trip Odometer, Total Odometer, Speed, Fuel Rate GPS, Fuel Used GPS}}} and ICCID.

← Older revision		Revision as of 09:15, 6 October 2022
Line 19:		Line 19:
	:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.		:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| and configured movement source}}};
	{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}		{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}

← Older revision		Revision as of 11:14, 11 June 2021
Line 5:		Line 5:
	==GPS Sleep mode==		==GPS Sleep mode==

	[[{{{model\|FMM6YX}}}]] is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.
			{{{model\|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.

	[[Image:GPS_Sleep_.gif]]		[[Image:GPS_Sleep_.gif]]

	When in GPS sleep mode, [[{{{model\|FMM6YX}}}]] turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>[[{{{model\|FMM6YX}}}]] will enter GPS sleep mode if ALL of these conditions are met:		When in GPS sleep mode, {{{model\|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model\|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:

	*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;		*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;
	*Device time ~~synchronization~~ depends on the ~~[[{{{model\|FMM6YX}}}_System_settings#Recors_Saving.2FSending_Without_TS\|'''Records~~ saving/sending without ~~TS''']]~~ parameter:		*Device time must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition depends on the “Records saving/sending without TS” parameter:

	:*~~'''''~~After Position Fix~~'''''~~ - [[{{{model\|FMM6YX}}}]] time is synchronized with GNSS satellites and GPS fix is obtained;		:*After Position Fix - {{{model\|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;
	:*~~'''''~~After Time Sync~~'''''~~ - [[{{{model\|FMM6YX}}}]] time is synchronized over NTP, NITZ, or GNSS satellites;		:*After Time Sync - {{{model\|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;
	:*~~'''''~~Always~~'''''~~ - [[{{{model\|FMM6YX}}}]] will enter sleep mode without time synchronization and GPS fix.		:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};
	{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}		{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}

	*There are no SMS messages being received.		*There are no SMS messages being received.

	{{{usb_disconnected\|}}}		{\| class="wikitable" style="border-style: solid; border-width: 0px"
	[[{{{model\|FMM6YX}}}]] exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:		\|+
			\|-
			\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]
			\| style="text-align: left; background: #F6F6FB;" \|On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.
			\|}
			{{{usb_disconnected\|}}}

			{{{model\|FMM6YX}}} exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:

	*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;		*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;
	{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}		{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}

← Older revision		Revision as of 11:11, 11 June 2021
Line 5:		Line 5:
	==GPS Sleep mode==		==GPS Sleep mode==

			[[{{{model\|FMM6YX}}}]] is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.
	{{{model\|FMM6YX}}} is able to go into GPS sleep mode if such mode is enabled.<br/>Sleep mode timeout starts counting when the device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, the device goes into sleep mode.

	[[Image:GPS_Sleep_.gif]]		[[Image:GPS_Sleep_.gif]]

	When in GPS sleep mode, {{{model\|FMM6YX}}} turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>{{{model\|FMM6YX}}} will enter GPS sleep mode if ALL of these conditions are met:		When in GPS sleep mode, [[{{{model\|FMM6YX}}}]] turns the GPS module off and continues making new periodic records. As a result power usage decreases, in turn saving vehicle battery.<br/>[[{{{model\|FMM6YX}}}]] will enter GPS sleep mode if ALL of these conditions are met:

	*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;		*{{{model\|FMM6YX}}} is configured to work in GPS Sleep mode and sleep timeout is reached;
	*Device time ~~must be synchronized with GPS satellites. From Firmware 03.18.15 version, this condition~~ depends on the ~~“Records~~ saving/sending without ~~TS”~~ parameter:		*Device time synchronization depends on the [[{{{model\|FMM6YX}}}_System_settings#Recors_Saving.2FSending_Without_TS\|'''Records saving/sending without TS''']] parameter:

	:*After Position Fix - {{{model\|FMM6YX}}} time is synchronized with GNSS satellites and GPS fix is obtained;		:*'''''After Position Fix''''' - [[{{{model\|FMM6YX}}}]] time is synchronized with GNSS satellites and GPS fix is obtained;
	:*After Time Sync - {{{model\|FMM6YX}}} time is synchronized over NTP, NITZ, or GNSS satellites;		:*'''''After Time Sync''''' - [[{{{model\|FMM6YX}}}]] time is synchronized over NTP, NITZ, or GNSS satellites;
	:*Always - {{{model\|FMM6YX}}} will enter sleep mode without time synchronization and GPS fix.		:*'''''Always''''' - [[{{{model\|FMM6YX}}}]] will enter sleep mode without time synchronization and GPS fix.

	*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};		*Movement is not detected by the accelerometer{{{txt_movement\| or configured movement source}}};
	{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}		{{{txt_ignition\|* Ignition (configured ignition source) is off;}}}

	*There are no SMS messages being received.		*There are no SMS messages being received.

	~~{\| class="wikitable" style="border-style: solid; border-width: 0px"~~		{{{usb_disconnected\|}}}
	\|+		[[{{{model\|FMM6YX}}}]] exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:
	\|-
	~~\| style="text-align: left; background: #F6F6FB;" \|[[Image:Bw_nb.png\|50px]]~~
	\| style="text-align: left; background: #F6F6FB;" \|On Firmware version older than 03.18.15, the device time has to be synchronized with GNSS satellites and GPS fix has to be obtained in order for the device to enter GPS Sleep mode.
	\|}
	{{{usb_disconnected\|}}}

	{{{model\|FMM6YX}}} exits GPS sleep mode if {{{txt_exit\|ONE of following conditions}}} is true:

	*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;		*Movement by accelerometer{{{txt_movement\| or configured movement source}}} is detected;
	{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}		{{{txt_ignition\|* Ignition (configured ignition source) is turned on.}}}