Template:FMC640 and FMM640 BLE module update - Revision history

Paulius.peciulis at 07:20, 22 April 2024

2024-04-22T07:20:47Z

← Older revision		Revision as of 10:20, 22 April 2024
Line 3:		Line 3:

	The BLE firmware can be obtained by contacting the sales manager or creating a ticket for technical support via the Helpdesk platform.<br>		The BLE firmware can be obtained by contacting the sales manager or creating a ticket for technical support via the Helpdesk platform.<br>
	'''Note: The BLE firmware received from the sales manager or technical support can be used ~~only~~ with FMX640 devices. ~~With~~ 03.00.15.Rev.13 firmware update, the BLE firmware can be used with FMX650 devices.		'''Note: The BLE firmware received from the sales manager or technical support can be used with FMX640 devices. And with 03.00.15.Rev.13 firmware update, the BLE firmware can be used with FMX650 devices.

	The update can be made in the following ways:		The update can be made in the following ways:

Paulius.peciulis at 07:20, 22 April 2024

2024-04-22T07:20:14Z

← Older revision		Revision as of 10:20, 22 April 2024
Line 1:		Line 1:
	==~~Introducation~~==		==Introduction==
	The Bluetooth Low Energy (BLE) firmware update can enhance the performance and stability of BLE devices. It is mandatory to update the device with at least 0.1.5 BLE firmware version to have the possibility to use {{{model\|FMC640}}} with BLE accessories or use the device as a beacon (to broadcast the ID).		The Bluetooth Low Energy (BLE) firmware update can enhance the performance and stability of BLE devices. It is mandatory to update the device with at least 0.1.5 BLE firmware version to have the possibility to use {{{model\|FMC640}}} with BLE accessories or use the device as a beacon (to broadcast the ID).

	The BLE firmware can be obtained by contacting the sales manager or creating a ticket for technical support via the Helpdesk platform.<br>		The BLE firmware can be obtained by contacting the sales manager or creating a ticket for technical support via the Helpdesk platform.<br>
	'''Note: The BLE firmware received from the sales manager or technical support can be used only with FMX640 devices. ~~Do not use it~~ with FMX650 ~~series~~ devices.~~'''~~		'''Note: The BLE firmware received from the sales manager or technical support can be used only with FMX640 devices. With 03.00.15.Rev.13 firmware update, the BLE firmware can be used with FMX650 devices.

	The update can be made in the following ways:		The update can be made in the following ways:

Aivaras.Dauda at 08:05, 4 December 2023

2023-12-04T08:05:11Z

← Older revision		Revision as of 11:05, 4 December 2023
Line 17:		Line 17:

	==Update via FOTA WEB==		==Update via FOTA WEB==
	Check if the device is updated with at least the 01.00.02 firmware version before starting the BLE firmware update. It is the minimal device firmware version that supports BLE firmware updates over the air. If the current ~~device~~ firmware version is older than 01.00.12, download the latest base firmware from [[Firmware_versions#PROFESSIONAL_trackers\|'''here''']] and ~~perform~~ the ~~update~~.		Check if the device is updated with at least the 01.00.02 firmware version before starting the BLE firmware update. It is the minimal device firmware version that supports BLE firmware updates over the air. If the current firmware version is older than 01.00.12, download the latest base firmware from [[Firmware_versions#PROFESSIONAL_trackers\|'''here''']] and update the device.

Aivaras.Dauda at 08:01, 4 December 2023

2023-12-04T08:01:45Z

← Older revision		Revision as of 11:01, 4 December 2023
Line 23:		Line 23:
	When the device is prepared, the BLE firmware update can be accomplished according to a quick and simple step-by-step guide below:		When the device is prepared, the BLE firmware update can be accomplished according to a quick and simple step-by-step guide below:

	1) {{{model\|}}} device must be registered in FOTA Web – device‘s model, firmware version, serial number, and other information must be shown.		1) {{{model\|FMC640}}} device must be registered in FOTA Web – device‘s model, firmware version, serial number, and other information must be shown.

	{{{model\|}}}device must have a correct device firmware version uploaded (Minimal device firmware 01.00.02). Once the device with the correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), the data about the device will be updated.		{{{model\|FMC640}}}device must have a correct device firmware version uploaded (Minimal device firmware 01.00.02). Once the device with the correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), the data about the device will be updated.

	[[File:04 FMx640 bluetooth update.jpg\|center]]		[[File:04 FMx640 bluetooth update.jpg\|center]]

Aivaras.Dauda at 15:44, 1 December 2023

2023-12-01T15:44:58Z

← Older revision		Revision as of 18:44, 1 December 2023
Line 1:		Line 1:
			==Introducation==
			The Bluetooth Low Energy (BLE) firmware update can enhance the performance and stability of BLE devices. It is mandatory to update the device with at least 0.1.5 BLE firmware version to have the possibility to use {{{model\|FMC640}}} with BLE accessories or use the device as a beacon (to broadcast the ID).

			The BLE firmware can be obtained by contacting the sales manager or creating a ticket for technical support via the Helpdesk platform.<br>
			'''Note: The BLE firmware received from the sales manager or technical support can be used only with FMX640 devices. Do not use it with FMX650 series devices.'''

			The update can be made in the following ways:
			*[[#Update_via_Configurator\|Via Configurator]]
			*[[#Update_via_FOTA_WEB\|Via Fota web]]

	==Update via Configurator==		==Update via Configurator==
	~~The~~ BLE ~~Firmware for {{{model\|FMC640}}} devices can be update~~ via ~~Configurator. Firstly, you should obtain~~ the ~~BLE FW file from your Sales Manager, then connect~~ the device to the PC, open configurator~~, press on~~ "Bluetooth 4.0" tab ~~and at~~ the bottom you will find "Transfer BLE Firmware file" with the "Upload" button. Press ~~"Upload" button,~~ choose BLE FW file, click OK and the device will be updated shortly.		Follow the procedure below to update BLE firmware via the configurator: <br>
			1) Connect the device to the PC and open the configurator.<br>
			2) Go to the "Bluetooth 4.0" tab. At the bottom, you will find the "Transfer BLE Firmware file" with the "Upload" button. Press it and choose the BLE FW file, click OK and the device will be updated shortly.<br>
			[[File:BLE Update Configurator.png\|center]]

	~~[[File:BLE Update Configurator.png\|center]]~~

	==Update via FOTA WEB==		==Update via FOTA WEB==
	~~The~~ BLE ~~Firmware for {{{model\|FMC640}}} devices can now be updated Over The Air by using FOTA WEB~~.		Check if the device is updated with at least the 01.00.02 firmware version before starting the BLE firmware update. It is the minimal device firmware version that supports BLE firmware updates over the air. If the current device firmware version is older than 01.00.12, download the latest base firmware from [[Firmware_versions#PROFESSIONAL_trackers\|'''here''']] and perform the update.
	~~Updating~~ the BLE ~~can enhanced performance~~ and ~~stability of BLE devices~~.

	~~Please note:~~
	~~- the minimal device firmware that supports over the air BLE update is 01.00.02.~~
	~~- the minimal BLE firmware version is v0.1.5~~
	In order to update your device‘s BLE firmware please follow a quick and simple step-by-step guide below. The procedure is the same for all devices. To get the module's firmware file, please contact your sales manager or fill a query in the VIP helpdesk.

	~~{{{model\|FMC640}}}~~ device ~~must be registered in FOTA Web – device‘s model~~, firmware ~~version, serial number~~ and ~~other information must be shown.~~		When the device is prepared, the BLE firmware update can be accomplished according to a quick and simple step-by-step guide below:

	{{{model\|~~FMC640~~}}}device must ~~have a correct device~~ firmware version ~~uploaded (Minimal device firmware 01.00.02). Once device with correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection~~, ~~initiated by an SMS command "web_connect")~~, ~~the data about the device will~~ be ~~updated~~.		1) {{{model\|}}} device must be registered in FOTA Web – device‘s model, firmware version, serial number, and other information must be shown.

			{{{model\|}}}device must have a correct device firmware version uploaded (Minimal device firmware 01.00.02). Once the device with the correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), the data about the device will be updated.

	[[File:04 FMx640 bluetooth update.jpg\|center]]		[[File:04 FMx640 bluetooth update.jpg\|center]]

			2) To update BLE a checkbox needs to be ticked, then the „Create task“ button pressed, and the „Update BLE firmware“ option selected:
	To update BLE a ~~check-box~~ needs to be ticked, then „Create task“ button pressed and „Update BLE firmware“ selected:

	[[File:03 FMX640 bluetooth update.gif]]		[[File:03 FMX640 bluetooth update.gif]]

			Once the firmware update task has been assigned, it can be seen in the main window. Please note that uploading will start after the next scheduled connection to Fota Web. The instant connection to the FOTA WEB can be initiated by an SMS command "web_connect".
	Once the ~~software~~ update task has been assigned, it can be seen in the main window. Please note, that uploading will start after the next scheduled connection to Fota Web ~~(or~~ instant connection, initiated by an SMS command "web_connect"):

Jonas.sterbavicius at 07:52, 10 March 2023

2023-03-10T07:52:24Z

← Older revision		Revision as of 10:52, 10 March 2023
Line 1:		Line 1:
	==Update via Configurator==		==Update via Configurator==
	The BLE Firmware for FMC640 ~~and FMM640~~ devices can be update via Configurator. Firstly, you should obtain the BLE FW file from your Sales Manager, then connect the device to the PC, open configurator, press on "Bluetooth 4.0" tab and at the bottom you will find "Transfer BLE Firmware file" with the "Upload" button. Press "Upload" button, choose BLE FW file, click OK and the device will be updated shortly.		The BLE Firmware for {{{model\|FMC640}}} devices can be update via Configurator. Firstly, you should obtain the BLE FW file from your Sales Manager, then connect the device to the PC, open configurator, press on "Bluetooth 4.0" tab and at the bottom you will find "Transfer BLE Firmware file" with the "Upload" button. Press "Upload" button, choose BLE FW file, click OK and the device will be updated shortly.

	[[File:BLE Update Configurator.png\|center]]		[[File:BLE Update Configurator.png\|center]]

	==Update via FOTA WEB==		==Update via FOTA WEB==
	The BLE Firmware for FMC640 ~~and FMM640~~ devices can now be updated Over The Air by using FOTA WEB.		The BLE Firmware for {{{model\|FMC640}}} devices can now be updated Over The Air by using FOTA WEB.
	Updating the BLE can enhanced performance and stability of BLE devices.		Updating the BLE can enhanced performance and stability of BLE devices.

Line 13:		Line 13:
	In order to update your device‘s BLE firmware please follow a quick and simple step-by-step guide below. The procedure is the same for all devices. To get the module's firmware file, please contact your sales manager or fill a query in the VIP helpdesk.		In order to update your device‘s BLE firmware please follow a quick and simple step-by-step guide below. The procedure is the same for all devices. To get the module's firmware file, please contact your sales manager or fill a query in the VIP helpdesk.

	FMC640 ~~or FMM640~~ device must be registered in FOTA Web – device‘s model, firmware version, serial number and other information must be shown.		{{{model\|FMC640}}} device must be registered in FOTA Web – device‘s model, firmware version, serial number and other information must be shown.

	FMC640 ~~or FMM640~~ device must have a correct device firmware version uploaded (Minimal device firmware 01.00.02). Once device with correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), the data about the device will be updated.		{{{model\|FMC640}}}device must have a correct device firmware version uploaded (Minimal device firmware 01.00.02). Once device with correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), the data about the device will be updated.

Renat Galiachmetov: /* Update via FOTA WEB */

2021-04-27T12:50:31Z

Update via FOTA WEB

← Older revision		Revision as of 15:50, 27 April 2021
Line 21:		Line 21:


	To update BLE a check-box needs to be ticked, then „Create task“ button pressed „Update BLE firmware“ selected:		To update BLE a check-box needs to be ticked, then „Create task“ button pressed and „Update BLE firmware“ selected:

	[[File:03 FMX640 bluetooth update.gif]]		[[File:03 FMX640 bluetooth update.gif]]

Renat Galiachmetov: /* Update via FOTA WEB */

2021-04-27T06:15:57Z

Update via FOTA WEB

← Older revision		Revision as of 09:15, 27 April 2021
Line 21:		Line 21:


	To update BLE a check-box needs to be ticked, then ~~„Actions“~~ button pressed ~~and~~ „Update BLE firmware“ selected:		To update BLE a check-box needs to be ticked, then „Create task“ button pressed „Update BLE firmware“ selected:

	[[File:03 FMX640 bluetooth update.gif]]		[[File:03 FMX640 bluetooth update.gif]]

Mantas.zemaitis at 13:04, 12 March 2021

2021-03-12T13:04:21Z

← Older revision		Revision as of 16:04, 12 March 2021
Line 1:		Line 1:
	The BLE in FMC640 and FMM640 can now be updated Over The Air by using FOTA WEB.		==Update via Configurator==
			The BLE Firmware for FMC640 and FMM640 devices can be update via Configurator. Firstly, you should obtain the BLE FW file from your Sales Manager, then connect the device to the PC, open configurator, press on "Bluetooth 4.0" tab and at the bottom you will find "Transfer BLE Firmware file" with the "Upload" button. Press "Upload" button, choose BLE FW file, click OK and the device will be updated shortly.

			[[File:BLE Update Configurator.png\|center]]

			==Update via FOTA WEB==
			The BLE Firmware for FMC640 and FMM640 devices can now be updated Over The Air by using FOTA WEB.
	Updating the BLE can enhanced performance and stability of BLE devices.		Updating the BLE can enhanced performance and stability of BLE devices.

Renat Galiachmetov: Protected "Template:FMC640 and FMM640 BLE module update" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

2020-10-16T06:38:59Z

Protected "Template:FMC640 and FMM640 BLE module update" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

← Older revision		Revision as of 09:38, 16 October 2020
(No difference)