Template:FMC GPRS settings - Revision history

Paulius.peciulis at 08:14, 26 March 2024

2024-03-26T08:14:18Z

← Older revision		Revision as of 11:14, 26 March 2024
Line 26:		Line 26:
	*When disabled (option introduced from 03.29.00.Rev.10 base firmware version) device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.		*When disabled (option introduced from 03.29.00.Rev.10 base firmware version) device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.
	GPRS Authentication:		GPRS Authentication:
	* Some operators use a specific type of ~~authentication~~ for GPRS sessions – CHAP or PAP. ~~If any of these is~~ used~~, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet"~~. Information about APN and ~~authentication type~~ should be provided by your GSM operator. <br />		* Some operators use a specific type of authentification for GPRS sessions. It could be CHAP or PAP authentifications. In configurator's GPRS settings there are option to select which GPRS authentification could be used. Information about the APN details and authentification should be provided by your GSM operator. <br />

	{{{txt_sim2\|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}		{{{txt_sim2\|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}

Airidas.S at 12:17, 28 December 2023

2023-12-28T12:17:00Z

← Older revision		Revision as of 15:17, 28 December 2023
Line 11:		Line 11:
	*Access point name password (optional – depending on operator). <br>		*Access point name password (optional – depending on operator). <br>
	Limit connection errors:		Limit connection errors:
	*When enabled device will try to open GPRS or socket and if it fails it will introduce additional delays on the next try. The delays are incremented based on the consecutive network errors received:		*When enabled (default option) device will try to open GPRS or socket and if it fails it will introduce additional delays on the next try. The delays are incremented based on the consecutive network errors received:
	1. No delays<br>		1. No delays<br>
	2. 1 minute.<br>		2. 1 minute.<br>
Line 24:		Line 24:
	Once 10 minutes is reached and if errors continue to occur the delay will not reset. When connection is succesful the delay resets. This feature is enabled for every socket and SIM1 or SIM2 (if available) GPRS context.		Once 10 minutes is reached and if errors continue to occur the delay will not reset. When connection is succesful the delay resets. This feature is enabled for every socket and SIM1 or SIM2 (if available) GPRS context.

	*When disabled device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.		*When disabled (option introduced from 03.29.00.Rev.10 base firmware version) device will spam the network with GPRS or socket related network operations with no additional delays. This might introduce operators bans on some devices if the network signal quality is poor and device tries its best to connect to the network.
	GPRS Authentication:		GPRS Authentication:
	* Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />		* Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />

Airidas.S at 12:14, 28 December 2023

2023-12-28T12:14:53Z

@@ Line 1: / Line 1: @@
 ==GPRS Settings==
-[[File:GPRS.png|right]]
+[[File:GPRS 2.PNG|right]]
 These settings define the main parameters for {{{model|FMC130}}}. <br/ >
 GPRS Context:
@@ Line 10: / Line 10: @@
 APN Password:
 *Access point name password (optional – depending on operator). <br>
 GPRS Authentication:
 * Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />

AugustasP at 06:23, 30 June 2022

2022-06-30T06:23:55Z

Show changes

AugustasP: /* GPRS Settings */

2022-06-30T06:21:09Z

GPRS Settings

@@ Line 1: / Line 1: @@
-==GPRS Settings and Server Settings==
+==GPRS Settings==
-These settings define the main parameters for {{{model|FMB1YX}}}: GSM operator ''APN'' and GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. An additional option is the use of TLS/DTLS encryption for sending records to the main server and backup server.
+[[File:GPRS.png|right]]
 {{{txt_sim2|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}
 ==Second Server Settings==
 Backup server has 4 different modes:

Mantas.Kraujelis at 12:14, 18 August 2021

2021-08-18T12:14:49Z

← Older revision		Revision as of 15:14, 18 August 2021
Line 42:		Line 42:

	From 03.27.xx firmware version, TLD/DTLS functionality was implemented for FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FM30XY, FMB2YX, FMT100 device.		From 03.27.xx firmware version, TLD/DTLS functionality was implemented for FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FM30XY, FMB2YX, FMT100 device.
			'''Note!''' Currently only TLS encryption functionality is fully implemented, if needed DTLS encryption is possible to implement.

	Supported versions: '''1.1/1.2'''		Supported versions: '''1.1/1.2'''

Mantas.Kraujelis at 11:30, 18 August 2021

2021-08-18T11:30:55Z

← Older revision		Revision as of 14:30, 18 August 2021
Line 9:		Line 9:
	*<span style="color:#F6A83E">Backup</span>: records are sent to backup server if main server is not available (for example fails to open link) or when main server response timeout is reached successively 5 times.		*<span style="color:#F6A83E">Backup</span>: records are sent to backup server if main server is not available (for example fails to open link) or when main server response timeout is reached successively 5 times.
	*<span style="color:#F6A83E">Duplicate</span>: records are sent to both servers (main and backup), records are deleted from SD-card (or Flash storage) only if both servers accepted the records.		*<span style="color:#F6A83E">Duplicate</span>: records are sent to both servers (main and backup), records are deleted from SD-card (or Flash storage) only if both servers accepted the records.
	*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol.		*<span style="color:#F6A83E">EGTS</span>: records are sent to both servers (main and backup), records are sent to the backup server using the EGTS protocol. '''RNIS''' system is supported with EGTS protocol.

	Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model\|FMB1YX}}} the device will send the newest records first when <span style=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|FMB1YX}}} and AVL application. If {{{model\|FMB1YX}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[Template:FMB Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>		Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.<br/>{{{model\|FMB1YX}}} the device will send the newest records first when <span style=color:#F6A83E>Newest</span> is selected in ''Records Settings'', which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.<br/>''Data Link Timeout'' is used to set termination timeout for the link between {{{model\|FMB1YX}}} and AVL application. If {{{model\|FMB1YX}}} has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to {{{ctrSleepModes\|[[Template:FMB Sleep modes#Deep Sleep mode]]}}}). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.<br/>''Server Response Timeout'' is used to set a period of time waiting for the response from the server-side.<br/>
Line 26:		Line 26:
	{{{fota_web\|		{{{fota_web\|
	==FOTA WEB Settings==		==FOTA WEB Settings==
			[[File:Fotawebsets.png\|right]]
	These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. The address and port number of the FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.		These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. The address and port number of the FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.

	From 03.27.XX firmware version, FOTA WEB connection period randomizer is added. The randomizer will choose a +-2.5 period for each connection. For example, then the connection period is set to 30 minutes, device with each connection will choose a new connection (from 27.5 min to 32.5 minutes). This also applies to the "web_connect" SMS/GRRS command. This has been implemented to ensure smoother operation of FOTA WEB services by spreading out large numbers of simultaneous device connections over a longer timeframe.		From 03.27.XX firmware version, FOTA WEB connection period randomizer is added. The randomizer will choose a +-2.5 period for each connection. For example, then the connection period is set to 30 minutes, device with each connection will choose a new connection (from 27.5 min to 32.5 minutes). This also applies to the "web_connect" SMS/GRRS command. This has been implemented to ensure smoother operation of FOTA WEB services by spreading out large numbers of simultaneous device connections over a longer timeframe.
	}}}		}}}
	~~{{{pic_gprs\|[[Image:GPRS_Settings_dualsim.png\|800px\|none]]}}}~~
	{{{tls/dtls\|		{{{tls/dtls\|
	==TLS/DTLS==		==TLS/DTLS==

Gabrielius.jankauskas at 17:44, 11 June 2021

2021-06-11T17:44:49Z

← Older revision		Revision as of 20:44, 11 June 2021
Line 33:		Line 33:
	{{{tls/dtls\|		{{{tls/dtls\|
	==TLS/DTLS==		==TLS/DTLS==

			Transport Layer Security (TLS) is a cryptographic protocol that provides end-to-end security of data sent between server and tracker.<br>
			There are three main components to what the TLS protocol accomplishes: Encryption, Authentication, and Integrity.<br>
			<b>Encryption:</b> hides the data being transferred from third parties.<br>
			<b>Authentication:</b> ensures that the parties exchanging information are who they claim to be.<br>
			<b>Integrity:</b> verifies that the data has not been forged or tampered with.<br>
			<br>

	From 03.27.xx firmware version, TLD/DTLS functionality was implemented for FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FM30XY, FMB2YX, FMT100 device.		From 03.27.xx firmware version, TLD/DTLS functionality was implemented for FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FM30XY, FMB2YX, FMT100 device.
Line 42:		Line 49:
	===TLS/DTLS certificate generation===		===TLS/DTLS certificate generation===

	Instructions cover how to generate an encryption certificate and how the device should be configured in order to send encrypted records into the client-server can be downloaded [[Media:FMBXX_TLSDTLS_encryption_configuration_v0.2.pdf\|'''HERE''']]. <br>		Instructions cover how to generate an encryption certificate and how the device should be configured in order to send encrypted records into the client-server can be downloaded [[Media:FMBXX_TLSDTLS_encryption_configuration_v0.3.pdf\|'''HERE''']]. <br>
	'''Server configuration and encryption certificate implementation is mandatory from the client-server side!'''		'''Server configuration and encryption certificate implementation is mandatory from the client-server side!'''
	}}}		}}}

Gabrielius.jankauskas at 13:48, 16 November 2020

2020-11-16T13:48:20Z

@@ Line 1: / Line 1: @@
-==GPRS Settings==
+==GPRS Settings and Server Settings==
-These settings define main parameters for {{{model|FMB1YX}}}: GSM operator ''APN'' and GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style=color:#F6A83E>TCP</span> or <span style=color:#F6A83E>UDP</span>. {{{txt_sim2|SIM1 and SIM2 ''GPRS Settings'' can be configured separately. }}}Backup server settings can also be selected for ''Backup'' server.<br/>Backup server has 3 different modes:
+These settings define the main parameters for {{{model|FMB1YX}}}: GSM operator ''APN'' and GPRS ''Username'' and ''Password'' (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – <span style="color:#F6A83E">TCP</span> or <span style="color:#F6A83E">UDP</span>. An additional option is the use of TLS/DTLS encryption for sending records to the main server and backup server.
 ==FOTA WEB Settings==
-These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. Address and port number of FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.
+These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. The address and port number of the FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.
-{{{pic_gprs|[[Image:FMB GPRS-settings-FMC125.jpg|800px|none]]}}}

Aurimas.vanagas at 08:56, 22 August 2019

2019-08-22T08:56:50Z

← Older revision		Revision as of 11:56, 22 August 2019
Line 8:		Line 8:
	==FOTA WEB Settings==		==FOTA WEB Settings==
	These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. Address and port number of FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.		These settings are used to configure FOTA WEB server connection parameters. ''Status'' enables or disables FOTA WEB functionality. Address and port number of FOTA website are entered to ''Domain'' and ''Port'' fields. ''Period'' is used to set the timeout of repeat connections to the FOTA WEB server.
	{{{pic_gprs\|[[Image:FMB GPRS-settings-~~{{{model\|FMB1YX}}}~~.jpg\|800px\|none]]}}}		{{{pic_gprs\|[[Image:FMB GPRS-settings-FMC125.jpg\|800px\|none]]}}}