Template:FMX640 Bluetooth 4.0 settings - Revision history

Justinas.strelciunas at 07:38, 10 November 2023

2023-11-10T07:38:24Z

← Older revision		Revision as of 10:38, 10 November 2023
Line 232:		Line 232:
	==Disclaimer==		==Disclaimer==

	If you are not using Bluetooth, please consider turning it off or change Bluetooth PIN to remove potential risks.		[[File:Alert.png\|left\|link=]] <br> If you are not using Bluetooth, '''please consider turning it off''' or '''change Bluetooth PIN''' to remove potential risks.

	If you are using Bluetooth we strongly recommend using AES encryption for enhanced security.		If you are using Bluetooth we strongly recommend '''using AES encryption''' for enhanced security.

	~~Example for formatting:~~

	~~[[File:IMAGE DISCLAIMER.png]]~~

Justinas.strelciunas at 13:31, 9 November 2023

2023-11-09T13:31:54Z

← Older revision		Revision as of 16:31, 9 November 2023
Line 229:		Line 229:
	</td></tr><tr><td>FMB140</td><td>All versions		</td></tr><tr><td>FMB140</td><td>All versions
	</td></tr><tr><td>FMU125</td><td>FW is on release, All versions</td></tr><tr><td>FMU126</td><td>FW is on release, All versions</td></tr><tr><td>FMU130</td><td>FW is on release, All versions</td><tr><td>FMM125</td><td>FW is on release, All versions</td></tr><tr><td>FMM130</td><td>FW is on release, All versions</td></tr><tr><td>FMM0YX</td><td>FW is on release, All versions</td></tr><tr><td>FMB202</td><td>All versions</td></tr><tr><td>FMB204</td><td>All versions</td></tr><tr><td>FMB208</td><td>All versions</td></td></tr><tr><td>FMC640</td><td>All versions</td></tr><tr></tr></table>		</td></tr><tr><td>FMU125</td><td>FW is on release, All versions</td></tr><tr><td>FMU126</td><td>FW is on release, All versions</td></tr><tr><td>FMU130</td><td>FW is on release, All versions</td><tr><td>FMM125</td><td>FW is on release, All versions</td></tr><tr><td>FMM130</td><td>FW is on release, All versions</td></tr><tr><td>FMM0YX</td><td>FW is on release, All versions</td></tr><tr><td>FMB202</td><td>All versions</td></tr><tr><td>FMB204</td><td>All versions</td></tr><tr><td>FMB208</td><td>All versions</td></td></tr><tr><td>FMC640</td><td>All versions</td></tr><tr></tr></table>

			==Disclaimer==

			If you are not using Bluetooth, please consider turning it off or change Bluetooth PIN to remove potential risks.

			If you are using Bluetooth we strongly recommend using AES encryption for enhanced security.

			Example for formatting:

			[[File:IMAGE DISCLAIMER.png]]

Gediminas.suminas: /* Supported Sensors List */

2022-01-26T12:20:46Z

Supported Sensors List

← Older revision		Revision as of 15:20, 26 January 2022
Line 172:		Line 172:
	*Escort luminosity BLE sensors		*Escort luminosity BLE sensors
	*Escort Temperature BLE sensors		*Escort Temperature BLE sensors
			*TELTONIKA [[EYE_BEACON_/_BTSID1\|EYE BEACON]]
			*TELTONIKA [[EYE_SENSOR_/_BTSMP1\|EYE SENSOR]]
	*S1 BLE Motion, Humidity and Temperature Sensors		*S1 BLE Motion, Humidity and Temperature Sensors
	*Technoton ~~Wireless fuel level sensors~~		*Technoton [[Technoton_DUT-E_S7_Fuel_Level_Sensor\|DUT-E S7 Fuel Level Sensor]]
			*Technoton [[Technoton_DFM_D_S7_Differential_Fuel_Flow_Meter\| DFM D S7 Differential Fuel Flow Meter]]
			*Technoton [[Technoton_GNOM_DDE/DP_S7_Axle_Load_Sensors\|GNOM DDE/DP S7 Axle Load Sensors]]
	*TZ-BT04 Temperature and Humidity Sensors		*TZ-BT04 Temperature and Humidity Sensors
	*TZ-BT05 Temperature and Humidity Sensors		*TZ-BT05 Temperature and Humidity Sensors

Gediminas.suminas: /* IO elements choices */

2022-01-26T12:14:27Z

IO elements choices

← Older revision		Revision as of 15:14, 26 January 2022
Line 59:		Line 59:
	!style="background: #0054A6; color:white" \|Connection #4 AVL ID		!style="background: #0054A6; color:white" \|Connection #4 AVL ID
	\|-		\|-
	\|None		\|'''None'''
	\|<nowiki>-</nowiki>		\|<nowiki>-</nowiki>
	\|<nowiki>-</nowiki>		\|<nowiki>-</nowiki>
Line 65:		Line 65:
	\|<nowiki>-</nowiki>		\|<nowiki>-</nowiki>
	\|-		\|-
	\|Temperature		\|'''Temperature'''
	\|701		\|701
	\|702		\|702
Line 71:		Line 71:
	\|704		\|704
	\|-		\|-
	\|Battery		\|'''Battery'''
	\|705		\|705
	\|706		\|706
Line 77:		Line 77:
	\|708		\|708
	\|-		\|-
	\|Humidity		\|'''Humidity'''
	\|709		\|709
	\|710		\|710
Line 83:		Line 83:
	\|712		\|712
	\|-		\|-
	\|Fuel		\|'''Fuel
	\|270		\|270
	\|273		\|273
Line 89:		Line 89:
	\|279		\|279
	\|-		\|-
	\|Luminosity		\|'''Luminosity'''
	\|717		\|717
	\|718		\|718
Line 95:		Line 95:
	\|720		\|720
	\|-		\|-
	\|Fuel LLS Fuel		\|'''Fuel LLS Fuel'''
	\|721		\|721
	\|722		\|722
Line 101:		Line 101:
	\|724		\|724
	\|-		\|-
	\|Fuel Frequency		\|'''Fuel Frequency'''
	\|725		\|725
	\|726		\|726
Line 107:		Line 107:
	\|728		\|728
	\|-		\|-
	\|Custom1		\|'''Custom1'''
	\|713		\|713
	\|714		\|714
Line 113:		Line 113:
	\|716		\|716
	\|-		\|-
	\|Custom2		\|'''Custom2'''
	\|729		\|729
	\|730		\|730
Line 119:		Line 119:
	\|732		\|732
	\|-		\|-
	\|Custom3		\|'''Custom3'''
	\|733		\|733
	\|734		\|734
Line 125:		Line 125:
	\|736		\|736
	\|-		\|-
	\|Custom4		\|'''Custom4'''
	\|737		\|737
	\|738		\|738
Line 131:		Line 131:
	\|740		\|740
	\|-		\|-
	\|Custom5		\|'''Custom5'''
	\|741		\|741
	\|742		\|742

Gediminas.suminas: /* IO elements choices */

2022-01-26T12:13:34Z

IO elements choices

← Older revision		Revision as of 15:13, 26 January 2022
Line 53:		Line 53:
	==IO elements choices==		==IO elements choices==
	{\| class="wikitable"		{\| class="wikitable"
	\|Name		!style="background: #0054A6; color:white" \|Name
	\|Connection #1 AVL ID		!style="background: #0054A6; color:white" \|Connection #1 AVL ID
	\|Connection #2 AVL ID		!style="background: #0054A6; color:white" \|Connection #2 AVL ID
	\|Connection #3 AVL ID		!style="background: #0054A6; color:white" \|Connection #3 AVL ID
	\|Connection #4 AVL ID		!style="background: #0054A6; color:white" \|Connection #4 AVL ID
	\|-		\|-
	\|None		\|None
Line 66:		Line 66:
	\|-		\|-
	\|Temperature		\|Temperature
	\|25		\|701
	\|26		\|702
	\|27		\|703
	\|28		\|704
	\|-		\|-
	\|Battery		\|Battery
	\|29		\|705
	\|20		\|706
	\|22		\|707
	\|23		\|708
	\|-		\|-
	\|Humidity		\|Humidity
	\|86		\|709
	\|~~104~~		\|710
	\|~~106~~		\|711
	\|~~108~~		\|712
	\|-
	~~\|Custom1~~
	~~\|331~~
	~~\|332~~
	~~\|333~~
	~~\|334~~
	\|-		\|-
	\|Fuel		\|Fuel
Line 96:		Line 90:
	\|-		\|-
	\|Luminosity		\|Luminosity
	\|~~335~~		\|717
	\|~~336~~		\|718
	\|~~337~~		\|719
	\|~~338~~		\|720
			\|-
			\|Fuel LLS Fuel
			\|721
			\|722
			\|723
			\|724
	\|-		\|-
	\|Fuel Frequency		\|Fuel Frequency
	\|~~306~~		\|725
	\|~~307~~		\|726
	\|~~308~~		\|727
	\|~~309~~		\|728
			\|-
			\|Custom1
			\|713
			\|714
			\|715
			\|716
	\|-		\|-
	\|Custom2		\|Custom2
	\|~~463~~		\|729
	\|~~467~~		\|730
	\|~~471~~		\|731
	\|~~475~~		\|732
	\|-		\|-
	\|Custom3		\|Custom3
	\|~~464~~		\|733
	\|~~468~~		\|734
	\|~~472~~		\|735
	\|~~476~~		\|736
	\|-		\|-
	\|Custom4		\|Custom4
	\|~~465~~		\|737
	\|~~469~~		\|738
	\|~~473~~		\|739
	\|~~477~~		\|740
	\|-		\|-
	\|Custom5		\|Custom5
	\|~~466~~		\|741
	\|~~470~~		\|742
	\|~~474~~		\|743
	\|~~478~~		\|744
	\|}		\|}

	==Supported Sensors List==		==Supported Sensors List==

Gediminas.suminas at 12:01, 26 January 2022

2022-01-26T12:01:50Z

← Older revision		Revision as of 15:01, 26 January 2022
Line 5:		Line 5:
	{{{model\|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.		{{{model\|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.

	[[Image:Common_settings.PNG~~\|300px~~\|none]]		[[Image:Common_settings.PNG\|none]]

	Configurable parameters:		Configurable parameters:

Airidas.S at 12:25, 25 June 2020

2020-06-25T12:25:30Z

← Older revision		Revision as of 15:25, 25 June 2020
Line 5:		Line 5:
	{{{model\|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.		{{{model\|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.

	[[Image:~~Blue-tooth 4.0v2 settings~~.PNG\|300px\|none]]		[[Image:Common_settings.PNG\|300px\|none]]

	Configurable parameters:		Configurable parameters:

			*'''''Update frequency''''' – changes sensor's temperature/humidity/battery voltage data update frequency. <br /> Minimum value: 30 s, maximum value: 65535 s, default value: 120.
			*'''''BLE Scan Duration''''' - Sensors data reading time.<br /> Minimum value: 5 s, maximum value: 120 s, default value: 60.
			*'''''Scan retries until error''''' - Configured scan retries, to show the Error Value '3000' - sensor disconnected.
	*'''''Non Stop Scan''''' - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.		*'''''Non Stop Scan''''' - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
	*'''''TZ-BT04/05/05B Update frequency''''' – changes sensor's temperature/humidity/battery voltage data update frequency. <br /> Minimum value: 120 s, maximum value: 65535 s, default value: 120.
	*'''''BLE Scan Duration''''' - Sensors data reading time.
	*'''''Scan retries until error''''' - Configured scan retries, to show the Error Value '3000' - sensor disconnected.
	*'''''Working mode''''' – Bluetooth connection mode''. '''Disabled''':'' Bluetooth 4.0 connection will not be used. '''''TZ-BT04/05/05B sensor''':'' this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.''		*'''''Working mode''''' – Bluetooth connection mode''. '''Disabled''':'' Bluetooth 4.0 connection will not be used. '''''TZ-BT04/05/05B sensor''':'' this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.''

Airidas.S: Created page with "TOC ==Bluetooth 4.0 settings== {{{model|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality. Image:Blue-tooth 4.0v2 settings.PNG..."

2020-06-25T12:21:31Z

Created page with "__TOC__ ==Bluetooth 4.0 settings== {{{model|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality. Image:Blue-tooth 4.0v2 settings.PNG..."

New page

__TOC__

==Bluetooth 4.0 settings==

{{{model|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality.

[[Image:Blue-tooth 4.0v2 settings.PNG|300px|none]]

Configurable parameters:

*'''''Non Stop Scan''''' - Enabled Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
*'''''TZ-BT04/05/05B Update frequency''''' – changes sensor's temperature/humidity/battery voltage data update frequency. <br /> Minimum value: 120 s, maximum value: 65535 s, default value: 120.
*'''''BLE Scan Duration''''' - Sensors data reading time.
*'''''Scan retries until error''''' - Configured scan retries, to show the Error Value '3000' - sensor disconnected.
*'''''Working mode''''' – Bluetooth connection mode''. '''Disabled''':'' Bluetooth 4.0 connection will not be used. '''''TZ-BT04/05/05B sensor''':'' this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.''

==Configuration modes==
Non Stop Scan Enabled.
[[Image:Common_settings_2.PNG|300px|none]]

In Configurator when Non Stop sensor scans is active update frequency & scan retries until error will be hidden. Although BLE scan duration will still be active because it is important for btgetlist SMS command.

Non Stop Scan Disabled, Scan period is selected manually.
[[Image:Common_settings_3.PNG|300px|none]]

From the picture above, the Scan time period will be selected from two sources, '''''BLE Scan Duration'' -''' the time when sensors are scanned and the '''''Update frequency''''' - The time when the sensor information is packed as the AVL Data record.

For example:

'''''Update frequency''' - 120 seconds.''

'''''BLE Scan Duration''''' ''- 60 Seconds''

Device will start the first scan after 120 seconds and will scan nearby BLE devices for 60 seconds to update configured sensor data. The sensor data will be updated every 120 seconds. Update Frequency is counted even while a scan is performed.

Update frequency period passes. 120 seconds -> 0 seconds, a 60 second scan is initiated. Update Frequency countdown is restarted (countdown from configured value to 0) while the scan (according to the BLE Scan duration parameter) is performed.

==Advanced Mode==
<br>When Advanced mode is selected a table with configurable parameters will appear:[[Image:BLE advanced window.png|1000px|none]]<br />

*The table has 9 types of parameters:
*#Type – EIR data type. This parameter will indicate which type to look for and work with. Note: We have also added type with value 0xFE which will indicate to work with a whole data packet and not just a single data type.
*#Data Offset – start index of data we are interested in.
*#Data Size – size of the data we are interested in.
*#Action – two actions are possible: Match and Save. Match means that we want to perform a validation of certain data. Save means that we want to get certain data and later save it to an AVL record.
*#IO – tells which IO element's data will be saved to. Possible choices for IO elements will be described later in the chapter. '''Used only with Save action.'''
*#Match – hex string to be matched with BLE sensor data. '''Used only with Match action.'''
*#Endianness – endianness of data: little endian (ex. 0x1122) or big endian (ex. 0x2211). '''Used only with Save action.'''
*#Multiplier – value to be used to multiply output data. '''Used only with Save action.'''
*#Offset – value to be added to output data. '''Used only with Save action.''' <br />

==IO elements choices==
{| class="wikitable"
|Name
|Connection #1 AVL ID
|Connection #2 AVL ID
|Connection #3 AVL ID
|Connection #4 AVL ID
|-
|None
|<nowiki>-</nowiki>
|<nowiki>-</nowiki>
|<nowiki>-</nowiki>
|<nowiki>-</nowiki>
|-
|Temperature
|25
|26
|27
|28
|-
|Battery
|29
|20
|22
|23
|-
|Humidity
|86
|104
|106
|108
|-
|Custom1
|331
|332
|333
|334
|-
|Fuel
|270
|273
|276
|279
|-
|Luminosity
|335
|336
|337
|338
|-
|Fuel Frequency
|306
|307
|308
|309
|-
|Custom2
|463
|467
|471
|475
|-
|Custom3
|464
|468
|472
|476
|-
|Custom4
|465
|469
|473
|477
|-
|Custom5
|466
|470
|474
|478
|}
==Supported Sensors List==

This list shows the supported BLE sensors and where their Presets can be found in the configurator to use those sensors with FMB devices. The prests and sensors have been fully tested by Teltonika and are confirmed to work properly.

While following the steps showed in the images below, you can find the supported sensors in our Configurator.

In the Configurator, find the Bluetooth 4.0 Settings menu, select the advanced sensors mode which was mentioned before. The following window should appear.
[[Image:Preset1.png|1200px|none]]

At the top right corner, you should see the following '''Buttons''', press on the first one from the left.
[[Image:Preset2.png|200px|none]]

After the named '''Button''' was pressed the list with all supported sensors and the configuration presets should appear.
[[Image:Preset3.png|150px|none]]

Select your sensor and click load. The correct configuration and recommended settings will appear in the configuration.
[[Image:Preset4.png|1200px|none]]

The supported sensors are listed below:

*BLE TPMS -Tire Pressure Monitoring System.
*Efento Humidity BLE sensors (version 2.2 and 4 presets)
*ELA ANG (Angle)
*ELA MOV AG (Movement and Angle)
*ELA PUCK ID (ID)
*ELA RHT (Temperature and Humidity)
*ELA T (Temperature)
*ELA MOV MAG (Movement Magnetic)
*Escort Fuel BLE sensors
*Escort luminosity BLE sensors
*Escort Temperature BLE sensors
*S1 BLE Motion, Humidity and Temperature Sensors
*Technoton Wireless fuel level sensors
*TZ-BT04 Temperature and Humidity Sensors
*TZ-BT05 Temperature and Humidity Sensors

==Visual demonstration==
Here is a visual demonstration of Bluetooth 4.0 sensors in a cold storage truck.
<br/><br/><youtube>n0yJvoCBZLI</youtube><br/>

==FMB Family Bluetooth 4.0 support==
<br>
Devices that are listed in table below shows which device model has Bluetooth 4.0 hardware installed. If your device is manufactured before the day shown in the list it means that this model does not have Bluetooth functionality or it has an older version installed. The date shown in the table depends on when hardware production has started, but not when first lot was sold.
<br>
<table class="nd-othertables" style="width: 40%;">
<tr>
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">Device Model</th>
<th style="width: 20%; text-align:center; vertical-align:middle; color: black">BT 4.0 manufacture starting date</th>
</tr><tr><td>FM3001</td><td>2018.01</td></tr><tr>
<td style="vertical-align:middle">FMB010 </td>
<td>2018.04</td>
</tr>
<tr>
<td style="vertical-align:middle">FMB001</td>
<td style="vertical-align:middle">2018.04</td>
</tr>
<tr>
<td style="vertical-align:middle">FMB900</td>
<td style="vertical-align:middle">2018.08</td>
</tr>
<tr>
<td style="vertical-align:middle">FMB920</td>
<td>2018.07</td>
</tr>
<tr>
<td style="vertical-align:middle">FMB964</td>
<td style="vertical-align:middle">2019.07</td>
</tr>

<tr>
<td style="vertical-align:middle">FMB120</td>
<td>2018.01</td>
</tr>

<tr>
<td style="vertical-align:middle">FMB122</td>
<td>2017.11</td>
</tr>
<tr>
<td style="vertical-align:middle">FMB125</td>
<td>2017.11</td>
</tr><tr><td>FMB130</td><td>All versions
</td></tr><tr><td>FMB140</td><td>All versions
</td></tr><tr><td>FMU125</td><td>FW is on release, All versions</td></tr><tr><td>FMU126</td><td>FW is on release, All versions</td></tr><tr><td>FMU130</td><td>FW is on release, All versions</td><tr><td>FMM125</td><td>FW is on release, All versions</td></tr><tr><td>FMM130</td><td>FW is on release, All versions</td></tr><tr><td>FMM0YX</td><td>FW is on release, All versions</td></tr><tr><td>FMB202</td><td>All versions</td></tr><tr><td>FMB204</td><td>All versions</td></tr><tr><td>FMB208</td><td>All versions</td></td></tr><tr><td>FMC640</td><td>All versions</td></tr><tr></tr></table>

Template:FMX640 Bluetooth 4.0 settings - Revision history

Justinas.strelciunas at 07:38, 10 November 2023

Justinas.strelciunas at 13:31, 9 November 2023

Gediminas.suminas: /* Supported Sensors List */

Gediminas.suminas: /* IO elements choices */

Gediminas.suminas: /* IO elements choices */

Gediminas.suminas at 12:01, 26 January 2022

Airidas.S at 12:25, 25 June 2020

Airidas.S: Created page with "__TOC__ ==Bluetooth 4.0 settings== {{{model|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality. Image:Blue-tooth 4.0v2 settings.PNG..."

Airidas.S: Created page with "TOC ==Bluetooth 4.0 settings== {{{model|FMB1YX}}} offers Bluetooth 4.0 (Bluetooth Low Energy, also referred as BLE) functionality. Image:Blue-tooth 4.0v2 settings.PNG..."