Template:FMx150 AutoScan - Revision history

Andrius.Kaminskas at 11:53, 4 August 2025

2025-08-04T11:53:08Z

Andrius.Kaminskas at 10:45, 24 July 2025

2025-07-24T10:45:29Z

← Older revision		Revision as of 13:45, 24 July 2025
Line 5:		Line 5:

	===Steps required to start using AutoScan feature===		===Steps required to start using AutoScan feature===
	1) Make sure device is using 04.01.00.Rev.xx firmware version or newer. <br>		1) Make sure device is using [https://wiki.teltonika-gps.com/view/Firmware_versions%23CAN_trackers 04.01.00.Rev.xx firmware version or newer]. <br>
	2) CAN Chip version is 00_02.03.00 or newer.<br>		2) CAN Chip version is 00_02.03.00 or newer.<br>
	3) Device is able to connect to FotaWEB.<br>		3) Device is able to connect to FotaWEB.<br>

Andrius.Kaminskas at 14:28, 21 July 2025

2025-07-21T14:28:16Z

← Older revision		Revision as of 17:28, 21 July 2025
Line 13:		Line 13:
	1) Take {{{model\|FMxy50}}} device vehicle connection scheme and connect {{{model\|FMxy50}}} device CAN lines as indicated.<br>		1) Take {{{model\|FMxy50}}} device vehicle connection scheme and connect {{{model\|FMxy50}}} device CAN lines as indicated.<br>
	2) When device powers up and ignition status changes to 1, AutoScan feature will start working automatically.<br>		2) When device powers up and ignition status changes to 1, AutoScan feature will start working automatically.<br>
	3) Device gathers data from CAN line for couple of seconds and sends it to ~~FOTA WEB~~.<br>		3) Device gathers data from CAN line for couple of seconds and sends it to FotaWEB.<br>
	4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>		4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>
	[[File:FMxy50 AutoScan 1.png]]<br>		[[File:FMxy50 AutoScan 1.png]]<br>
Line 20:		Line 20:
	6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.		6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.

	'''Note:''' after uploading CAN OEM file, CAN IO parameters are not enabled automatically. Manual enabling of required parameters is required by choosing priority ~~Low~~.		'''Note:''' after uploading CAN OEM file, CAN IO parameters are not enabled automatically. Manual enabling of required parameters is required by choosing Low priority.

	===AutoScan feature manual initiation===		===AutoScan feature manual initiation===

Andrius.Kaminskas at 14:20, 21 July 2025

2025-07-21T14:20:54Z

← Older revision		Revision as of 17:20, 21 July 2025
Line 8:		Line 8:
	2) CAN Chip version is 00_02.03.00 or newer.<br>		2) CAN Chip version is 00_02.03.00 or newer.<br>
	3) Device is able to connect to FotaWEB.<br>		3) Device is able to connect to FotaWEB.<br>
			'''Note:''' if device firmware and CAN Chip version are older, both of them can be updated remotely via FotaWEB platform.

	===AutoScan feature flow===		===AutoScan feature flow===
Line 27:		Line 28:
	===AutoScan feature with unsupported vehicles===		===AutoScan feature with unsupported vehicles===
	In case you have a vehicle, which is not included in {{{model\|FMxy50}}} supported vehicle list, AutoScan feature can be used to find best match from our already supported vehicle library.		In case you have a vehicle, which is not included in {{{model\|FMxy50}}} supported vehicle list, AutoScan feature can be used to find best match from our already supported vehicle library.
	For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.<br>		For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.<br><br>
	Possible OBDII port CAN pairs:~~<br>~~		Possible OBDII port CAN pairs:
	[[File:OBD port explained.png\|center\|450px\|OBDII port pairs]]		[[File:OBD port explained.png\|center\|450px\|OBDII port pairs]]
	~~<br>~~
	'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.		'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.

Andrius.Kaminskas at 14:17, 21 July 2025

2025-07-21T14:17:40Z

← Older revision		Revision as of 17:17, 21 July 2025
Line 27:		Line 27:
	===AutoScan feature with unsupported vehicles===		===AutoScan feature with unsupported vehicles===
	In case you have a vehicle, which is not included in {{{model\|FMxy50}}} supported vehicle list, AutoScan feature can be used to find best match from our already supported vehicle library.		In case you have a vehicle, which is not included in {{{model\|FMxy50}}} supported vehicle list, AutoScan feature can be used to find best match from our already supported vehicle library.
	For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.		For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.<br>
			Possible OBDII port CAN pairs:<br>
	[[File:OBD port explained.png\|~~thumb~~\|~~upright=1~~]]		[[File:OBD port explained.png\|center\|450px\|OBDII port pairs]]
			<br>
	'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.		'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.

Andrius.Kaminskas at 14:10, 21 July 2025

2025-07-21T14:10:09Z

← Older revision		Revision as of 17:10, 21 July 2025
Line 27:		Line 27:
	===AutoScan feature with unsupported vehicles===		===AutoScan feature with unsupported vehicles===
	In case you have a vehicle, which is not included in {{{model\|FMxy50}}} supported vehicle list, AutoScan feature can be used to find best match from our already supported vehicle library.		In case you have a vehicle, which is not included in {{{model\|FMxy50}}} supported vehicle list, AutoScan feature can be used to find best match from our already supported vehicle library.
	For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.		For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.

			[[File:OBD port explained.png\|thumb\|upright=1]]

	'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.		'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.

Andrius.Kaminskas at 14:21, 18 July 2025

2025-07-18T14:21:31Z

← Older revision		Revision as of 17:21, 18 July 2025
Line 7:		Line 7:
	1) Make sure device is using 04.01.00.Rev.xx firmware version or newer. <br>		1) Make sure device is using 04.01.00.Rev.xx firmware version or newer. <br>
	2) CAN Chip version is 00_02.03.00 or newer.<br>		2) CAN Chip version is 00_02.03.00 or newer.<br>
	3~~) Device have active GPRS connection.<br>~~		3) Device is able to connect to FotaWEB.<br>
	4) Device is able to connect to FotaWEB.<br>

	===AutoScan feature flow===		===AutoScan feature flow===

Andrius.Kaminskas at 14:05, 18 July 2025

2025-07-18T14:05:22Z

← Older revision		Revision as of 17:05, 18 July 2025
Line 15:		Line 15:
	3) Device gathers data from CAN line for couple of seconds and sends it to FOTA WEB.<br>		3) Device gathers data from CAN line for couple of seconds and sends it to FOTA WEB.<br>
	4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>		4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>
			[[File:FMxy50 AutoScan 1.png]]<br>
	5) When data is analysed, second task will appeared called "Upload autoscan CAN OEM file".<br>		5) When data is analysed, second task will appeared called "Upload autoscan CAN OEM file".<br>
			[[File:FMxy50 AutoScan 2.png]]<br>
	6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.		6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.

Andrius.Kaminskas at 13:40, 18 July 2025

2025-07-18T13:40:31Z

← Older revision		Revision as of 16:40, 18 July 2025
Line 21:		Line 21:

	===AutoScan feature manual initiation===		===AutoScan feature manual initiation===
	In case device have already uploaded CAN OEM file or previous AutoScan process have failed, SMS/GPRS command '''runautoscan''' can be used to remove current CAN OEM file from {{{model\|FMxy50}}} device and ~~start~~ AutoScan feature again.<br>		In case device have already uploaded CAN OEM file or previous AutoScan process have failed, SMS/GPRS command '''runautoscan''' can be used to remove current CAN OEM file from {{{model\|FMxy50}}} device and initiate AutoScan feature again.<br>
	This also can be performed by using Teltonika configurator by clicking "Scan" button in CAN settings tab.		This also can be performed by using Teltonika configurator by clicking "Scan" button in CAN settings tab.

Line 35:		Line 35:
	===Can AutoScan feature be used with ECAN02?===		===Can AutoScan feature be used with ECAN02?===
	Yes, AutoScan feature will work even by using ECAN02 in installations, where direct CAN wire connection cannot be done.<br>		Yes, AutoScan feature will work even by using ECAN02 in installations, where direct CAN wire connection cannot be done.<br>
	Using ECAN02 some parameters, which require direct connection, will not be received. You can check those parameters in [https://wiki.teltonika-gps.com/view/FMX150_supported_vehicles {{{model\|FMxy50}}} supported vehicle list], they are marked in yellow.		Using ECAN02 some parameters, which require direct connection, will not be received. You can check those parameters in [https://wiki.teltonika-gps.com/view/FMX150_supported_vehicles {{{model\|FMxy50}}} supported vehicle list], they are marked in yellow color.

Andrius.Kaminskas at 13:32, 18 July 2025

2025-07-18T13:32:21Z

← Older revision		Revision as of 16:32, 18 July 2025
Line 12:		Line 12:
	===AutoScan feature flow===		===AutoScan feature flow===
	1) Take {{{model\|FMxy50}}} device vehicle connection scheme and connect {{{model\|FMxy50}}} device CAN lines as indicated.<br>		1) Take {{{model\|FMxy50}}} device vehicle connection scheme and connect {{{model\|FMxy50}}} device CAN lines as indicated.<br>
	2~~) Configure DIN1 as ignition source or other alternative source if DIN1 is unavailable.<br>~~		2) When device powers up and ignition status changes to 1, AutoScan feature will start working automatically.<br>
	3) When device ~~power ups~~ and ~~vehicle~~ ignition ~~is on~~, AutoScan feature will start working automatically.<br>		3) Device gathers data from CAN line for couple of seconds and sends it to FOTA WEB.<br>
	4) Device gathers data from CAN line for couple of seconds and sends it to FOTA WEB.<br>		4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>
	5) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>		5) When data is analysed, second task will appeared called "Upload autoscan CAN OEM file".<br>
	6) When data is analysed, second task will appeared called "Upload autoscan CAN OEM file".<br>		6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.
	7) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.

	'''Note:''' after uploading CAN OEM file, CAN IO parameters are not enabled automatically. Manual enabling of required parameters is required.		'''Note:''' after uploading CAN OEM file, CAN IO parameters are not enabled automatically. Manual enabling of required parameters is required by choosing priority Low.

			===AutoScan feature manual initiation===
			In case device have already uploaded CAN OEM file or previous AutoScan process have failed, SMS/GPRS command '''runautoscan''' can be used to remove current CAN OEM file from {{{model\|FMxy50}}} device and start AutoScan feature again.<br>
			This also can be performed by using Teltonika configurator by clicking "Scan" button in CAN settings tab.

	===AutoScan feature with unsupported vehicles===		===AutoScan feature with unsupported vehicles===
Line 26:		Line 29:

	'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.		'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.

	~~===AutoScan feature manual initiation===~~
	In case device have already uploaded CAN OEM file or previous AutoScan process have failed, SMS/GPRS command '''runautoscan''' can be used to remove current CAN OEM file from {{{model\|FMxy50}}} device and start AutoScan feature again.

	===How long AutoScan feature takes?===		===How long AutoScan feature takes?===

← Older revision		Revision as of 14:53, 4 August 2025
Line 1:		Line 1:
	{{{title\|=={{{model\|FMxy50}}} AutoScan feature==}}}		{{{title\|=={{{model\|FMxy50}}} AutoScan feature==}}}
	Starting from firmware version 04.01.00.Rev.xx the Autoscan feature for {{{model\|FMxy50}}} devices enables automatic identification of vehicle CAN parameters without requiring manual vehicle selection or a FotaWEB account. The system works by collecting CAN data from the vehicle, sending it to FotaWEB for processing, and automatically receiving the appropriate CAN OEM file.		Starting from firmware version 04.01.00.Rev.08 the Autoscan feature for {{{model\|FMxy50}}} devices enables automatic identification of vehicle CAN parameters without requiring manual vehicle selection or a FotaWEB account. The system works by collecting CAN data from the vehicle, sending it to FotaWEB for processing, and automatically receiving the appropriate CAN OEM file.

	This option allows even read CAN data from unsupported vehicles!		This option allows even read CAN data from unsupported vehicles!

	===Steps required to start using AutoScan feature===		===Steps required to start using AutoScan feature===
	1) Make sure device is using [https://wiki.teltonika-gps.com/view/Firmware_versions%23CAN_trackers 04.01.00.Rev.xx firmware version or newer]. <br>		1) Make sure device is using [https://wiki.teltonika-gps.com/view/Firmware_versions%23CAN_trackers 04.01.00.Rev.08 firmware version or newer]. <br>
	2) CAN Chip version is 00_02.03.00 or newer.<br>		2) CAN Chip version is 00_02.06.01 or newer.<br>
	3) Device is able to connect to FotaWEB.<br>		3) Device is able to connect to FotaWEB.<br>
	'''Note:''' if device firmware and CAN Chip version are older, both of them can be updated remotely via FotaWEB platform.		'''Note:''' if device firmware and CAN Chip version are older, both of them can be updated remotely via FotaWEB platform.
Line 15:		Line 15:
	3) Device gathers data from CAN line for couple of seconds and sends it to FotaWEB.<br>		3) Device gathers data from CAN line for couple of seconds and sends it to FotaWEB.<br>
	4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>		4) In FotaWEB, in Tasks section automatically will appear task called "Received autoscan CAN file".<br>
	[[~~File~~:FMxy50 AutoScan 1.png]]<br>		[[Image:FMxy50 AutoScan 1.png\|center]]<br>
	5) When data is analysed, second task will appeared called "Upload autoscan CAN OEM file".<br>		5) When data is analysed, second task will appeared called "Upload autoscan CAN OEM file".<br>
	[[~~File~~:FMxy50 AutoScan 2.png]]<br>		[[Image:FMxy50 AutoScan 2.png\|center]]<br>
	6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.		6) When both tasks are successfully completed, {{{model\|FMxy50}}} device will have CAN OEM file uploaded and vehicle CAN parameters will be read.

Line 24:		Line 24:
	===AutoScan feature manual initiation===		===AutoScan feature manual initiation===
	In case device have already uploaded CAN OEM file or previous AutoScan process have failed, SMS/GPRS command '''runautoscan''' can be used to remove current CAN OEM file from {{{model\|FMxy50}}} device and initiate AutoScan feature again.<br>		In case device have already uploaded CAN OEM file or previous AutoScan process have failed, SMS/GPRS command '''runautoscan''' can be used to remove current CAN OEM file from {{{model\|FMxy50}}} device and initiate AutoScan feature again.<br>
	This also can be performed by using Teltonika ~~configurator~~ by clicking "Scan" button in CAN settings tab.		This also can be performed by using Teltonika Configurator by clicking "Scan" button in CAN settings tab. If ignition status will be on, status "OEM Autoscan Running" will be visible:
			[[Image:AutoScan_Running_Conf.png\|center\|300px]]<br>
			After colleting CAN data and receiving CAN OEM file, in Teltonika Configurator status will change to "OEM File Loaded":
			[[Image:AutoScan_Loaded_Conf.png\|center\|300px]]<br>

	===AutoScan feature with unsupported vehicles===		===AutoScan feature with unsupported vehicles===
Line 30:		Line 33:
	For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.<br><br>		For CAN line connection you can follow from similar vehicle model that we support already, by connecting to OBD port CAN lines or by connecting other twisted CAN line pair from the vehicle wire loom.<br><br>
	Possible OBDII port CAN pairs:		Possible OBDII port CAN pairs:
	[[~~File~~:OBD port explained.png\|center\|450px~~\|OBDII port pairs~~]]		[[Image:OBD port explained.png\|center\|450px]]

	'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.		'''Note:''' by connecting unsupported vehicle, AutoScan feature will not guarantee that all expected CAN parameters will be read or provide correct value.