Line 22: |
Line 22: |
| High level, with priority High and configured to generate event on both range enter and exit(figure below "IO" section), then the sent SMS is:<br /> | | High level, with priority High and configured to generate event on both range enter and exit(figure below "IO" section), then the sent SMS is:<br /> |
| ''“2016/1/20 12:00:00 Digital Input 1”'' | | ''“2016/1/20 12:00:00 Digital Input 1”'' |
− |
| |
| | | |
| [[File:FM36YX SMS event DIN1.png]] | | [[File:FM36YX SMS event DIN1.png]] |
− |
| |
| | | |
| The SMS Text field can be altered and any text can be entered. Maximum message length is 90 | | The SMS Text field can be altered and any text can be entered. Maximum message length is 90 |
Line 43: |
Line 41: |
| To configure SMS events for scenarios, open Scenarios window and Enable desired scenario. | | To configure SMS events for scenarios, open Scenarios window and Enable desired scenario. |
| Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario. | | Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario. |
− | Figure 38 shows how to enable Green Driving and Immobilizer SMS Events. | + | Figure below shows how to enable Green Driving and Immobilizer SMS Events. |
| | | |
| [[File:FM36YX_SMS_event_Scenarios.png]] | | [[File:FM36YX_SMS_event_Scenarios.png]] |
− |
| |
− |
| |
− |
| |
| | | |
| When any of the scenarios events occurs, a text message will be sent to the predefined number. | | When any of the scenarios events occurs, a text message will be sent to the predefined number. |
Line 54: |
Line 49: |
| '''TRIP''' | | '''TRIP''' |
| | | |
− | In order to configure Trip SMS events click on Trip window and Enable Trip feature (figure 40). | + | In order to configure Trip SMS events click on Trip window and Enable Trip feature (figure below). |
| Then go to GSM -> SMS -> SMS Events settings and Enable Trip SMS event. After enabling SMS | | Then go to GSM -> SMS -> SMS Events settings and Enable Trip SMS event. After enabling SMS |
− | Events (figure 41), trip event will be triggered and message sent, when Trip starts (GNSS speed | + | Events (figure below), trip event will be triggered and message sent, when Trip starts (GNSS speed |
| exceeds the speed in Start Speed (ex. 5 km/h) and when Trip stops, that is ignition is turned off | | exceeds the speed in Start Speed (ex. 5 km/h) and when Trip stops, that is ignition is turned off |
| longer then the time written in Ignition Off Timeout (ex. 60 seconds). | | longer then the time written in Ignition Off Timeout (ex. 60 seconds). |
− |
| |
| | | |
| [[File:FM36YX_SMS_event_TRIP.png]] | | [[File:FM36YX_SMS_event_TRIP.png]] |
− |
| |
− |
| |
− |
| |
| | | |
| '''Geofence''' | | '''Geofence''' |
Line 70: |
Line 61: |
| Geofence SMS event is triggered and message sent when the device exits and/or enters a | | Geofence SMS event is triggered and message sent when the device exits and/or enters a |
| configured Geofence zone. The Geofence zone must be configured to generate an event On Exit, | | configured Geofence zone. The Geofence zone must be configured to generate an event On Exit, |
− | On Enter or On Both (figure 42). If No Event is selected, then it is not possible to turn on SMS | + | On Enter or On Both (figure below). If No Event is selected, then it is not possible to turn on SMS |
| events. If several zones are created then SMS events can be turned on separately for each zone | | events. If several zones are created then SMS events can be turned on separately for each zone |
| entering different text message. | | entering different text message. |
− |
| |
| | | |
| [[File:FM36YX_SMS_event_Geofence.png]] | | [[File:FM36YX_SMS_event_Geofence.png]] |
− |
| |
− |
| |
− |
| |
| | | |
| '''AutoGeofence''' | | '''AutoGeofence''' |
| | | |
| SMS events for AutoGeofence are configured the same as in Geofence. AutoGeofence is in | | SMS events for AutoGeofence are configured the same as in Geofence. AutoGeofence is in |
− | Features -> Auto geofencing (figure 44), for SMS events configuration, go to GSM -> SMS -> SMS | + | Features -> Auto geofencing, for SMS events configuration, go to GSM -> SMS -> SMS |
− | Events (figure 45). | + | Events (figure below). |
− | | |
| | | |
| [[File:FM36YX_SMS_event_AutoGeofence.png]] | | [[File:FM36YX_SMS_event_AutoGeofence.png]] |
− |
| |
− |
| |
| | | |
| '''I/O events''' | | '''I/O events''' |
| | | |
− | FM3612 sends SMS event message when a configured I/O property enters and/or exits its
| + | {{{model|FM36YX}}} sends SMS event message when a configured I/O property enters and/or exits its |
| configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not | | configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not |
| generate event, so SMS event could not be configured). Every IO element SMS event can be | | generate event, so SMS event could not be configured). Every IO element SMS event can be |
| configured to send individual message to different numbers. | | configured to send individual message to different numbers. |
− |
| |
| | | |
| [[File:FM36YX_SMS_event_I-O_events.png]] | | [[File:FM36YX_SMS_event_I-O_events.png]] |