Changes

=='''How to insert {{{sim_type|Micro-}}}SIM card'''==

=='''How to insert {{{sim_type|Micro-}}}SIM card'''==

# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}

# Attach device '''cover'''.

# Attach device '''cover''' and put the '''screws''' from the package into the holes.

# Put the '''screws''' back in.

# '''Screw''' all 4 screws.

# Device is ready to be connected.

# Device is ready to be connected.

[[Image:1-1_fmb640_SIM.png|330px]][[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]

[[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]

[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]

[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]