Changes

891 bytes added ,  11:42, 8 January 2020
no edit summary
Line 1: Line 1:  
__TOC__
 
__TOC__
   −
== Beacon Settings ==  
+
==Beacon Settings==  
 
<br>
 
<br>
 
'''Beacon Detection'''
 
'''Beacon Detection'''
Line 11: Line 11:  
'''Beacon Record'''<br>
 
'''Beacon Record'''<br>
   −
0 (Eventual) – Disabled. (Record is sent after scan procedure is completed).<br>
+
0 (Eventual) – Disabled. (Record is sent after scan procedure is completed). This parameter depends from the '''Bluetooth 4.0 Scan Settings'''.<br>
 
1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period).<br>
 
1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period).<br>
   Line 22: Line 22:  
[[File:Beacon Settings.PNG|Beacon Settings]]
 
[[File:Beacon Settings.PNG|Beacon Settings]]
   −
== Beacon List ==
+
 
 +
While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.
 +
 
 +
 
 +
Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.
 +
 
 +
 
 +
The Beacons which was found will be shown in the Configurator and send as the '''AVL ID 314''' record data.
 +
 
 +
==Beacon List==
 
<br>
 
<br>
 
List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br>
 
List of authorized beacons. Eddystone and iBeacon protocols are supported*.<br>
Line 30: Line 39:  
''*''Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts
 
''*''Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts
 
can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc
 
can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc
 +
 +
 +
There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.
 +
 +
Example for the configured beacons detection in the List.
 +
 +
 +
Below there is provided the example of the List, while using the '''Beacons Detection source as Configured.''' The provided example is showing the configuration for the iBeacon and Eddy-stone.
 +
 +
<br />
 
[[Category:FMB120 Configuration]]
 
[[Category:FMB120 Configuration]]