Changes

<b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b>

<b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b>

{{{pic|[[Image:Fmb640.png|400px|right]]}}}

{{{pic|[[Image:FMB640 New Case Laser.png|400px|right]]}}}

=='''How to insert SIM card'''==

=='''How to insert SIM card'''==

#Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.

#Insert '''SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}

2. Remove the cover.<BR>

#Attach device '''cover''' and put the '''screws''' from the package into the holes.

3. Insert SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.<BR>

#'''Screw''' all 4 screws.

#Device is ready to be connected.

5. After configuration, see “PC Connection (Windows)”, attach device cover back.<BR>

6. Screw in all screws. Device is ready to be mounted.<BR>

[[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]

[[Image:SIM instructions FMM64FMC64.PNG|660px]]

[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]