Changes

Autoscan is a feature that automatically finds the best program number for your vehicle.

''Autoscan'' is a feature that automatically finds the best program number for your vehicle.

Here is a quick guide on how to use the Autoscan feature.

Here is a quick guide on how to use the ''Autoscan'' feature.

Step 1.

'''Step 1.'''

Update FMB140 firmware to FMB.Ver.03.25.15.Rev.141 or later

Update FMB140 firmware to ''FMB.Ver.03.25.15.Rev.141'' or later

Step 2.  

'''Step 2.'''

Find the OBD-II port (diagnostic connector) in your vehicle. Connect the FMB140 CAN1L and CAN1H wires to OBD-II Connector PIN14 and PIN6 respectively.

Find the OBD-II port (diagnostic connector) in your vehicle. Connect the FMB140 CAN1L and CAN1H wires to OBD-II Connector PIN14 and PIN6 respectively.

IMG

IMG

Step 3.

'''Step 3.'''

IMG

IMG

If no CAN bus connection is detected, configurator will return an error after pressing scan button.

If no CAN bus connection is detected, configurator will return an error after pressing scan button.

After a successful scan, you will receive a list of compatible program numbers. The first program number will be saved in device internal CAN chip and device configuration.

After a successful scan, a list of compatible program numbers will be displayed. The first program number will be saved in device internal CAN chip and device configuration.

You can try entering each of the scanned numbers into your configuration to see which parameters are available and which suggestion works best for your vehicle.

You can try entering each of the scanned numbers into device configuration to see which parameters are available and which suggestion works best for the vehicle.