0
edits
Changes
FM Configurator introduction (view source)
Revision as of 00:49, 29 April 2020
, 00:49, 29 April 2020Change descriptions
__TOC__
__TOC__
[[File:Fm_configurator_laptop.png|300px|right]]Teltonika Configurator software is sophisticated tracker management tool. With just one application you can manage several types of devices.
[[File:Fm_configurator_laptop.png|300px|right]]FM Configurator software is a sophisticated tracker management tool. With just one application you can manage several types of devices.
FM Configurator who precedes Teltonika Configurator lets you make a fast and easy configuration. Configurator only supports connection over USB cable. Simple GUI allows you to use FM configurator without any user manuals.
<br />
=== FM Configurator Supported Hardware ===
<br />
* FMA1XY
* FM36M1
* FM36XY
* FM10XY
* FMA2XY
* FM63XY
* FM11XY
* FM41XY
* FM42XY
* FM21XY
* FM53XY
* FM22XY
* FM55XY
* FM34XY
To start configuring a connected device, be sure that it is correctly readed & detected by your PC COM port, click on "connect" button at the left corner of FM Configurator & wait for device autentification ("Device connected succesfully" ad must be seen in the lower part of configurator) Once here, the user will met a standard and basic configuration where the essential GPRS settings must be set to get started. A highly configuration can be done by clicking "Advanced Configuration". After the configuration is done it can be saved as a file and charged to appropriate devices.
====Creating a new configuration without connected device====
====Creating a new configuration====
To create a new configuration, click the "Create new configuration" button in the main menu of the configurator. Then choose what device you want to create a configuration for, and then select the firmware version that the configuration should support. This will then take you to the configuration screen.
To create a new configuration, run the appropriate FM Configuration, click the "Advanced configuration" button of the configurator and start creating the configuration. Once you have finish, press "Save to file"
'''Opening an existing configuration'''
'''Opening an existing configuration'''
To edit an existing configuration, click the "Open configuration file" button in the main menu of the configurator. This will prompt you to select the configuration file. After selecting the file you want to edit, it will take you to the configuration screen.
To edit an existing configuration, run FM Configurator, click the "Load from file" button in the main menu of the configurator. This will prompt you to select the configuration file. After selecting the file you want to edit, it will take you to the configuration screen<br />
<br />
----
----