Changes

__TOC__

__TOC__

===Configuring Blue Puck/Coin/Slim Beacon===

===Configuring Blue Puck/Coin/Slim Sensor===

[[Image:Screen beacon.png|right|frame]]

[[Image:Screen beacon.png|right|frame]]

Bluetooth LE Blue Puck, Blue Coin and Blue Slim beacons are disabled by default. <br>Configurations to these beacons are written through NFC.<br>

Bluetooth LE Blue Puck, Blue Coin and Blue Slim beacons are disabled by default. <br>Configurations to these beacons are written through NFC.<br>

<b>Note!</b> Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.<br><br>

<b>Note!</b> Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.<br><br>

Follow these instructions to easily configure Blue Puck/Coin/Slim Bluetooth LE Beacon:

Follow these instructions to easily configure Blue Puck/Coin/Slim Bluetooth LE Sensor:

*Enable <code>Bluetooth</code> and <code>NFC</code> on your Android-powered device.

*Enable <code>Bluetooth</code> and <code>NFC</code> on your Android-powered device.

*Launch <b>Device Manager Mobile</b> on your Android-powered device.

*Launch <b>Device Manager Mobile</b> on your Android-powered device.

*Select <i>Configuration.</i>

*Select <i>Configuration.</i>

*Place your Android-powered device on top of Blue Puck/Coin/Slim Beacon to scan it.

*Place your Android-powered device on top of Blue Puck/Coin/Slim Sensors to scan it.

*Click <i>Enable</i> to allow Blue Puck/Coin/Slim Beacon transmit advertising data.

*Click <i>Enable</i> to allow Blue Puck/Coin/Slim Sensors transmit advertising data.

*We recommend to set <i>Power</i> to 4 to get the best possible distance.

*We recommend to set <i>Power</i> to 4 to get the best possible distance.

*Set ''TAG Format'' to iBeacon.

*Set ''TAG Format'' to Sensor.

*Set ''BLE Emit Period'' to 1 second to get the best possible sensor detection.

*Set ''BLE Emit Period'' to 1 second to get the best possible sensor detection.

*Click <i>Write</i> button.

*Click <i>Write</i> button.

*Place your Android-powered device on top of Blue Puck/Coin/Slim sensor to write configuration to it.

*Place your Android-powered device on top of Blue Puck/Coin/Slim sensor to write configuration to it.

Once the configuration is written successfully, the Blue Puck/Coin/Slim Beacon will be enabled and use the settings configured in the APP.<br>

Once the configuration is written successfully, the Blue Puck/Coin/Slim Sensor will be enabled and use the settings configured in the APP.<br>

<b>Note!</b> Make sure that <i>Manufacturer data mode</i> is Disabled, otherwise BLE Beacon will not be detected without additional changes in configuration.

<b>Note!</b> Make sure that <i>Manufacturer data mode</i> is Disabled, otherwise Sensor will not be detected without additional changes in configuration.

==Beacon Configuration and data sending==  

==Sensor Configuration and data sending==  

<br>

<br>

===Beacon configuration===

===Beacon configuration===