This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
+
{{{SELV|* The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is {{{voltage|+10..+30}}}V DC.}}}
+
*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}}
+
{{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}}
+
{{{connecting|* When connecting the {{{wires|wires}}}{{{2x6_wires|2x6 connector wires to the vehicle}}}{{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}}
+
{{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}}
+
{{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}}
+
{{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}<br>
+
{{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}}