Changes

After configuration device start parameters now we go to configure OBD II elements.

After configuration device start parameters now we go to configure OBD II elements.

In the photo below (this is example case) you see where you must go to configurate main parameter that you need to have from device.

In the photo below (this is an example case) you see where you must go to configurate the main parameter that you need to have from the device.

In OBD II window you see a lot of I/O elements to configure the device properly you will need to know which parameters can be read from the vehicle using our OBD trackers. To know what parameters can be read please visit  

In the OBD II window you see a lot of I/O elements to configure the device properly you will need to know which parameters can be read from the vehicle using our OBD trackers. To know what parameters can be read please visit  

[[File:Obd_turbo.jpg|alt=|frameless|825x825px]]

[[File:Obd_turbo.jpg|alt=|frameless|825x825px]]

==Parsing Fleet Maintenance Schedule records==

==Parsing information==

==='''1.Prerequisites:'''===

==='''1.Prerequisites:'''===

|}

|}

==In platform==

==Demonstration in platform==

TAVL: Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.

TAVL: Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.