633
edits
Changes
→Configuration
* '''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.
* '''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.
* ''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.
* ''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.
<br>
<br>
[[File:Configurator GUI changes.png]]
[[File:Configurator GUI changes.png]]
<br>
<br>
<br>
'''Beacons'''
<br>
Beacons configuration instruction: [https://wiki.teltonika-gps.com/view/How_to_start_with_FMB_devices_and_Beacons%3F How to start with FMB devices and Beacons?]
<br>
<br>
[[File:EYE Beacons configurator.png]]
<br>
<br>
'''Beacon detection''' - Parameter controls over all Beacons scanning: [[File:Beacon detection configurator.png|right|border]]
* '''Disabled''' – Beacon scanning and transmitting disabled.
* '''All''' – Read all visible beacons;
* '''Configured''' – Read only beacons set in Beacon List;
* '''Teltonika MAC''' – Filter and transmit only Teltonika EYE packets*.
*It allows to filter only MAC addresses which will be assigned to BTSX device. The MAC address that is currently filtered by this parameter is FD:5F:9A:XX:XX:XX. Note: It is not possible to test this functionality as there is no devices with assigned MAC addresses yet.
<br>
<br>
'''Beacon record''' [[File:Beacon record on change.png|right|border]]
'''Eventual''' settings have two modes:
* '''Monitoring''' - Beacon record generating every scan period
* '''On change''' - Beacon records are generated only when there are changes in scanned list.
'''Periodic''' - records are generated according to Period settings. When there is no visible beacons, empty record will be generated.
<br>
<br>
'''Beacon Mode''' [[File:Beacon Mode SImple.png|right|border]]
* '''Simple''' - beacon parsing is done automatically (Eddystone and iBeacon protocols are supported).
* '''Advanced''' - beacon data capturing can be configured.
<br>
<br>
'''Filter type''' [[File:Filter Type.png|right|border]]
New firmware has two Beacon lists, so it is possible to create two separate lists of beacons, standard one with Beacons ID (UUID:Major:Minor, or Namespace:InstanceID) and new one according Beacon Name (by name or prefix, for example all beacons with prefix "ID1" can be saved.
<br>
* '''Beacon ID''' - configurator allows to configure beacon id in iBeacon or Eddystone format.
* '''Beacon Name''' - user can enter names of beacons which needs to be filtered. It would filter the full name or only if the prefix of the name is configured like “BTS”.
<br>
Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list. Filtering only works Beacon Mode is set to Simple.
==Protocol overwiev==
==Protocol overwiev==