1,647
edits
Changes
→Teltonika configurator
To configure FM with BTSMP1 EYE Sensor:
To configure FM with BTSMP1 EYE Sensor:
# In [[FMB120 System settings|System settings]] Enable [[Codec#Codec%208%20Extended|Codec8 Extended]];
# In [[FMB120 GPRS settings|GPRS settings]] Configure [[FMB120 GPRS settings#GPRS%20Settings%20and%20Server%20Settings|GPRS Settings and Server Settings]]
# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:
## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to the set Eye Sensor protocol set in EYE App -> Basic Settings -> Packet settings.
## Configure MAC address of the sensor
# Make sure that name of the sensor is default length (10 symbols) in EYE App -> Basic Settings tab
If you do not have preset you can download them from below table:
If you do not have preset you can download them from below table: