Changes

no edit summary
Line 4: Line 4:  
==Introduction==
 
==Introduction==
   −
To satisfy the growing demand for farming produce and tackle many challenges affecting the agriculture industry, present-day farmers have to be more innovative, efficient, competitive, but save resources at the same time. As a result, comprehensive, affordable, and customisable agricultural machinery tracking solutions combined with process monitoring and automation are becoming not only an attractive option but rather a necessity.
+
Society’s safety and security to a large extent rests on the efficiency of police work. Meanwhile, speed, coordination of actions and reliability of information are the key factors that ensure police officers are performing their duties properly. In most cases, time is very valuable and police have to be at the needed location as fast as possible to prevent theft or other crimes that can lead to even more tragic consequences.
    
==Solution description==
 
==Solution description==
Thanks to the fast-developing IoT technologies, agriculture-specific equipment, farming implements, and/or accessories tracking and management can be successfully achieved by combining GPS devices, CAN Bus data adaptors, and Bluetooth Low Energy 4.X (BLE) ID beacons. The ultimate choice for this matter - Teltonika ADVANCED category GPS tracker FMB140 with built-in CAN data reading feature and advanced software version supporting agriculture type vehicles (aka ALL-CAN300 option). The main advantage is the ability to receive specific agricultural vehicle data via the CAN bus via the Agricultural State Flag parameter. It is possible to obtain such special data as the position of the joystick, the position and status of hydraulic tools, the status of the grain tank and more. Also, using BLE sensors and beacons, you can get additional parameters that are not provided by standard sensors. This can be raising or lowering of the dump truck body and cab, temperature and humidity in the chamber. You can also track expensive equipment using BLE beacons.
+
Teltonika offers integrators a solution to the above-mentioned challenges. Professional tracker FMC640 with 4G (LTE Cat 1) network coverage (including fallback to 2G (GSM) and 3G (UMTS) networks) can be set to determine location automatically and that will help to coordinate police fleets more effectively. All data will be transferred via VPN.
 +
 
 +
By getting information on the present police duty status, an operator can in a few seconds communicate with the available police officers and inform on the reported incident. Thus, trackers can significantly save time in assigning incidents. Also, setting reminders for maintenance based on vehicle mileage helps to avoid accidents on the roads.
 +
 
 +
Teltonika tracker can be used with a third part device that simulates different values. Connected via analog input, tracker can detect duty status (Ready, Busy, Lunch, or Going to incident) by differentiating voltage, e.g., 5 volts can be set for duty status ‘Ready’. This way, operators can observe duty status online. Police siren can be monitored with a professional tracker as well.
 +
 
 +
Additionally, it is very important for police to know vehicle door status, especially when the arrested persons are seated in the back. By connecting LV-CAN200 to tracker FMC640, police can get door status and much more – such data as mileage, fuel consumption, fuel level, RPM, engine temperature, and accelerator pedal position. These features of GPS tracker will maximize fleet efficiency.
 +
 
 +
For safety procedures, driver identification can be enabled, so that only the authorized person can ride a vehicle. There are a few ways to identify driver – by RFID card, iButton or BLE ID beacon.
    
==What you need for a solution?==
 
==What you need for a solution?==
   −
*[https://teltonika-gps.com/product/fmb140/'''FMB140 device'''].
+
*[https://teltonika-gps.com/product/fmc640/'''FMC640 device'''].
   −
*The [https://wiki.teltonika-gps.com/view/FMB003_First_Start#How_to_insert_Nano-SIM_card_and_connect_battery '''SIM card'''] in order to get data to your server
+
*The [https://wiki.teltonika-gps.com/view/FMC640_First_Start#How_to_insert_microSD_card_into_FMC640 '''SIM card'''] in order to get data to your server
    
*[https://wiki.teltonika-gps.com/view/FOTA_WEB '''FOTA WEB'''] to remotely send the configuration to the device.<br />
 
*[https://wiki.teltonika-gps.com/view/FOTA_WEB '''FOTA WEB'''] to remotely send the configuration to the device.<br />
   −
*[https://wiki.teltonika-gps.com/view/How_to_start_with_FMB_devices_and_Sensors%3F'''BLE ID beacons and sensors.''']<br />
+
*[https://wiki.teltonika-gps.com/view/How_to_start_with_FMB_devices_and_Beacons%3F'''BLE ID beacons.''']<br />
 +
 
 +
*[https://teltonika-gps.com/product/rfid-reader/'''1-WIRE RFID reader.''']<br />
 +
 
 +
*[https://teltonika-gps.com/product/lv-can200/'''LV-CAN200.'''] - Light vehicle CAN adapter.<br />
      Line 23: Line 35:  
==Installation==
 
==Installation==
   −
[[File:FMB140-wiring-scheme.jpg|thumb750x600px]]
+
[[File:Police_scheme.jpg|thumb750x600px]]