Changes

no edit summary
Line 38: Line 38:       −
When installing FMB140 in a vehicle, follow the[https://wiki.teltonika-gps.com/view/FMB003_First_Start ''' mounting recommendations. ''']When connecting to the CAN bus, you must use the diagrams provided by our technical support engineers. The diagrams indicate in detail and clearly the connection points in the vehicle wiring and the required program number. It is also possible to obtain data from the vehicle CAN bus by performing an  [https://wiki.teltonika-gps.com/view/FMB140_autoscan_feature_instructions '''auto scan procedure.'''] FMB140 has the function of working with wireless BLE sensors, supports connection of temperature sensors and iButton reader via 1-wire.
+
When installing FMC640 in a vehicle, follow the[https://wiki.teltonika-gps.com/view/FMC640_First_Start ''' mounting recommendations. ''']When connecting to the CAN bus, you must use the diagrams provided by our technical support engineers. The diagrams indicate in detail and clearly the connection points in the vehicle wiring and the required program number. FMC640 has the function of working with wireless BLE beacons and iButton reader via 1-wire.
 
+
<br />
 +
<br />
 +
<br />
 +
[[File:Slim id.jpg|left|thumb500x600px]]
 +
[[File:1 wire reader.jpg|right]]
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 
<br />
 
<br />
[[File:Ble mount.jpg|thumb500x600px]]
     −
The installation of BLE sensors and beacons is quite simple, you need to install the sensor in a suitable place using screws or double-sided tape and install the required configuration in the tracker and sensor. This gives a huge advantage over wired sensors, since there is no need to pull wires, which means you can seriously save on the services of an electrician!
+
To identify the driver and passengers, it is enough to have a BLE beacon or an RFID plastic card with you. In this case, it is possible both to simply identify those in the vehicle interior and to prevent unauthorized starting of the car engine. Also, FMC640 has several digital inputs and outputs, which makes it possible to implement such scenarios as a panic button, a button for transferring to rest or patrol mode, connecting various signaling devices.
 
<br />
 
<br />
 
==Configuration==
 
==Configuration==