0
edits
Changes
Advanced Beacon Capturing Configuration (view source)
Revision as of 16:09, 27 December 2021
, 16:09, 27 December 2021→EYE Sensor Capturing Configuration
==== EYE Sensor Capturing Configuration ====
==== EYE Sensor Capturing Configuration ====
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found here(link).
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]](link).
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
[[File:Beacon temp marked.png|right|frameless|545x545px]]
[[File:Beacon temp marked.png|right|frameless|545x545px]]
* '''Name''' - Eddystone and iBeacon were typed to name different sensors.
* '''Name''' - Eddystone and iBeacon were typed to name different sensors.
*'''Manufacturer ID''' - is taken from protocol description, passing 9bytes and capturing UUID and Type. AAFE00, to comply Manufacturer ID size which is 4 bytes, 00 is added.
*'''Manufacturer ID''' - is taken from protocol description, which can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]]. UUID and Type value is AAFE00 for Eddystone. CompanyID and Beacon Type are used for iBeacon which is 4C000215.
*'''Manufacturer ID Offset''' - number used to indicate when Manufacturer ID starts in advertising packet.
*'''Manufacturer ID Offset''' - passes 9bytes in advertising packet to indicate when Manufacturer ID starts. 5bytes for iBeacon.
*'''Manufacturer ID Size''' - number which indicates length of Manufacturer ID.
*'''Manufacturer ID Size''' - number which indicates size of Manufacturer ID. 3bytes for Eddystone 4bytes for iBeacon.
*'''Beacon ID Offset''' - number used to indicate when Beacon ID starts in advertising packet.
*'''Beacon ID Offset''' - number used to indicate when Beacon ID starts in advertising packet.
*'''Beacon ID Size''' - number which indicates length of Beacon ID size, Instance ID is set in Eddystone and whole ID in iBeacon.
*'''Beacon ID Size''' - number which indicates length of Beacon ID size. E.g. Instance ID is set in Eddystone and whole ID(UUID, Major, Minor) in iBeacon.
*'''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. Temperature.
*'''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. Temperature.
*'''Beacon ID Source'''- configured ID output is shown in pictures. MAC address can be used as Source ID as well, in this case, It would be showed in ID section.
*'''Beacon ID Source'''- configured ID output is shown in pictures. MAC address can be used as Source ID as well, in this case, It would be showed in ID section.