Changes

These are instructions how to easily prepare Bluetooth Hands Free device connection to FMB device. First we need to configure FMB device Bluetooth settings for proper connection to this hands-free unit. These are required steps:

These are instructions how to easily prepare Bluetooth Hands Free device connection to FMB device. First we need to configure FMB device Bluetooth settings for proper connection to this hands-free unit. These are required steps:

* Press „Bluetooth“ settings (Figure 43 1 position).

* Press „Bluetooth“ settings (position 1).

* Turn on BT Radio by pressing „Enable (visible)“ (Figure 43 2 position). “Local name” (Figure 43 3 position) automatically will be “FMB120_last 7 imei digits”, you can leave it or type your own name.

* Turn on BT Radio by pressing „Enable (visible)“ (position 2). “Local name” (Figure 43 3 position) automatically will be “FMB120_last 7 imei digits”, you can leave it or type your own name.

* Set Security Mode (Figure 43 4 position) to “PIN only” or “None” (you could select “PIN + MAC list” or “MAC list only” security mode but in this case you need to type external device MAC address in “Authorized Devices MAC List” (Figure 43 7 position).

* Set Security Mode (position 4) to “PIN only” or “None” (you could select “PIN + MAC list” or “MAC list only” security mode but in this case you need to type external device MAC address in “Authorized Devices MAC List” (position 7).

* Set connection mode to “Hands Free” (Figure 43 5 position).

* Set connection mode to “Hands Free” (position 5).

* Set „External Name“ (Figure 43 6 position) as your Hands Free device name for proper device identification and connection to it. In this example Hands Free headset name is „DMH10“ but at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your Hands Free adapter Bluetooth name by scanning nearby Bluetooth devices using mobile phone or computer with Bluetooth adapter.

* Set „External Name“ (position 6) as your Hands Free device name for proper device identification and connection to it. In this example Hands Free headset name is „DMH10“ but at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your Hands Free adapter Bluetooth name by scanning nearby Bluetooth devices using mobile phone or computer with Bluetooth adapter.

* Go to “SMS \ Call Settings” in left menu and set “Incomming Call Action” to “Do Nothing” visible at Figure 44.

* Go to “SMS \ Call Settings” in left menu and set “Incoming Call Action” to “Do Nothing” visible on next figure.

* After all these steps press „Save to device“ to save configuration.

* After all these steps press „Save to device“ to save configuration.

* Now you can disconnect FMB device from a configurator.

* Now you can disconnect FMB device from a configurator.

==Device’s log using your mobile phone==

==Device’s log using your mobile phone==

==Device debug over Android smartphone==

==Device debug over Android smartphone==