0
edits
Changes
Template:FMB Blue-tooth settings (view source)
Revision as of 13:35, 11 April 2018
, 13:35, 11 April 2018no edit summary
==How to connect OBD II Bluetooth Dongle to FMB device==
==How to connect OBD II Bluetooth Dongle to FMB device==
===Bluetooth settings configuration===
[[Image:Fmb120_bt_odbii_settings.png|300px|right]]
These are instructions how to easily prepare Bluetooth Dongle connection to FMB device. First we need to configure FMB device Bluetooth settings for proper connection to this unit. These are required steps:
* Go to Bluetooth section similarly to as shown in the figure to the right.
When device configuration is loaded press „Bluetooth“ settings (Figure 46 1 position).
* Turn on BT Radio by pressing „Enable (visible)“ (Figure 46 2 position). “Local name” (Figure 46 3 position) automatically will be “FMB120_last 7 imei digits”, you can leave it or type your own name.
* Set Security Mode (Figure 46 4 position) to “PIN only” or “None” (you could select “PIN + MAC list” or “MAC list only” security mode but in this case you need to type external device MAC address in “Authorized Devices MAC List” (Figure 46 7 position).
* Set connection mode to “OBDII” (Figure 46 5 position).
* Set „External Name“ as your Bluetooth OBD II device name for proper device identification and connection to it. In this example OBD II device name is „DONGLE“ but at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your OBD II adapter Bluetooth name by scanning nearby Bluetooth devices using mobile phone or computer with Bluetooth adapter.
* Go to “OBD II (Bluetooth)” in left menu and select priority and others parameters visible in the following figure.
[[Image:Fmb120_odbii_settings.png|800px|center]]
* After all these steps press „Save to device“ to save configuration (position 8 in the top right hand figure).
* Now you can disconnect FMB device from a configurator.
===Connecting to Bluetooth OBD II dongle===
After this configuration you could connect your car OBD II dongle to FMB device. Turn on ignition then turn on its Bluetooth connection. For pairing follow your dongle instructions. OBDII device notification about paired Bluetooth connection depends on specific model. If you later restart FMB device it will automatically connect to this dongle.
===Supported Bluetooth OBD II dongles===
FMB module works with Bluetooth OBD II dongles which are made with ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:
[[Image:Elm317_stn1110_comp.png|300px|center]]