1,645
edits
Changes
→DualCam update procedure
10 At this point the command should return “Front/Rear camera camgetver failed.” If it does, it does not mean a problem, because V2.2.0 is a transitional firmware and it does not return version. Therefore, if the camera was returning V1.9.3/1.9.2 or other 1.9.X version, this means it has updated to the V2.2.0 successfully and update procedure can continue.
10 At this point the command should return “Front/Rear camera camgetver failed.” If it does, it does not mean a problem, because V2.2.0 is a transitional firmware and it does not return version. Therefore, if the camera was returning V1.9.3/1.9.2 or other 1.9.X version, this means it has updated to the V2.2.0 successfully and update procedure can continue.
11 Format the cards again as in step 4 and disconnect from the camera the FMx125. After that go with step 12.
11 Format SD cards again as it is in step 4 and disconnect from the camera the FMx125. After that go with step 12.
12 Take the cards out and write the firmware file of V2.2.2 to the root of both SD cards. The file name is “ALL222_IPC_BIN”. Again, do not rename it.
12 Take the cards out and write the firmware file of V2.2.2 to the root of both SD cards. The file name is “ALL222_IPC_BIN”. Again, do not rename it.