Changes

Configuration of fuel consumption:

Configuration of fuel consumption:

# To configure this parameters use fuel consumption norm which are presented in your car technical documentation. By default speeds for this fuel consumption norms are: City – 30 km/h, Average - 60km/h, Highway - 90 km/h. If you want, you can change it.

# To configure these parameters use fuel consumption norms which are presented in technical documentation of the vehicle. By default speeds for this fuel consumption norms are: City – 30 km/h, Average - 60km/h, Highway - 90 km/h. These values can be changed.

# When speed are higher than highway fuel consumption speed, we add for highway fuel consumption x % of highway fuel consumption every y km/h, by default FMB120 add 20% every 50 km/h. It means that fuel consumption is (1.2 * Highway Fuel Consumption) on 140 km/h speed, (1.4 * Highway Fuel Consumption) on 190 km/h speed.

# When speed is higher than highway fuel consumption speed, we add for highway fuel consumption x % of highway fuel consumption every y km/h, by default FMB120 adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * Highway Fuel Consumption) at 140 km/h speed, (1.4 * Highway Fuel Consumption) at 190 km/h speed.

# Correction coefficient is use for correction every value of fuel consumption which is send to server (Used Fuel * Correction coefficient). By default it is 1, min 0.01 and max 2. For example, when correction coefficient is 1 and FMB120 calculate that used fuel of 35 m distance is 20 ml, to server will be sent value: 20 ml, if correction coefficient is 1.2 to server will be sent value: 20 * 1.2 = 24 ml.

# Correction coefficient is used to correct every value of fuel consumption which is sent to server through expression of (Used Fuel * Correction coefficient). By default it is 1, with mininum and maximum values of accordingly 0.01 and 2. For example, when correction coefficient is 1 and FMB120 calculates that used fuel of 35 m distance is 20 ml, the value of 20 ml will be sent to the server, if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.

# Fuel consumption on idling used to calculate fuel consumption when ignition is on, but vehicle speed is 0 km/h. By default it is 1 l/h, min 0 and max 5 l/h. Almost in all diesel cars this parameter is less than 1.0 l/h. In gasoline cars this parameter is about 1.5 – 2.0 l/h.

# Fuel Consumption on Idling is used to calculate fuel consumption when ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars. This parameter is about 1.5 – 2.0 l/h for gasoline cars.

==DOUT controls==

==DOUT controls==

Please refer to [[FMB120 DOUT controls|DOUT controls]].

Please refer to [[FMB120 DOUT controls|DOUT controls]].