Changes

{{{with_battery|

{{{with_battery|

# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# Gently remove {{{model|FMB965}}} '''cover''' using '''plastic pry tool''' from both sides.

# gently lift the PCB out of the cover

# gently lift the PCB out of the cover

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing outwards to slot.

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB965}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing outwards to slot.

# Connect the battery as shown on device.

# Connect the battery as shown on device.

# Place PCB back into the place as shown in the picture, first the end that is marked as '''1''' needs to inserted, then the end that is marked as '''2'''

# Place PCB back into the place as shown in the picture, first the end that is marked as '''1''' needs to inserted, then the end that is marked as '''2'''