Changes

Test Dual Cam wiki (view source)

Revision as of 09:28, 14 July 2022

739 bytes removed , 09:28, 14 July 2022

→‎Periodic image sending scenario

Line 332: Line 332:

|}

<br>

−

~~===Periodic image sending scenario===~~

−

~~Periodic image sending triggers photo capture from a front camera, whenever the timeout is reached (sending interval parameter).~~

−

~~'''Update: Since 03.27.03.Rev.04 firmware''', Periodic Image Sending Enable/Disable switch was replaced by a camera selection:~~

−

* Both cameras deselected – periodic image sending is disabled (value 0)

−

* Front camera selected – front camera’s pictures will be sent periodically (value 1)

−

* Rear camera selected – rear camera’s pictures will be sent periodically (value 2)

−

* Both cameras selected – both cameras’ pictures will be sent periodically (value 3)

−

~~If the camera has not finished uploading pictures to the server, then the photo capture is skipped.~~

−

===Video sending by trigger===

Video sending by trigger camera scenario monitors the selected trigger (video sending trigger parameter) and captures video from front, rear or both cameras before and after the event (video duration before trigger and video duration after trigger parameters). If the previously captured video has not finished downloading, then a new video capture is skipped until the old one has been sent. When this scenario is triggered, high priority eventual record is generated with the value corresponding to what triggered the scenario. See the table below.

Edgar.dementenko

Administrators

1,645

edits