Changes

|}

|}

===Setting up Alarm priority records===

===Setting up Alarm priority records===

In addition, you can select which IO element can generate Satellite records (Alarm priority). In order to do that you need to go to the IO tab select IO record priority Panic what you want to get that data through satellites if there is no GSM connection.

In addition, you can select which IO element can generate Alarm priority record. The configurable IO parameters are listed as ''SBD IO source'' in list above. In order to do that you need to configure these '''IO''' elements as '''Panic priority'''. If properly configured SBD records are generated and sent if there is no GSM connection.

In the scenario shown in the above picture when a panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if that timeout device will not send a record through the GPRS network it will be sent with Iridium satellites.

 

In scenario shown in above picture when panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send record through GPRS network it will be sent with Iridium satellites